Use Tutorials Video: * Check

The disadvantage of this test indicates that some models cannot be tested when the resolution of this tester is above 3K. Ltn133yl02 / 03 / 04 / 05 / 06 can not be tested normally, so only self-test line can be used. Other LCDs with resolution above 3K do not promise to test normally. The resolution below 3K is no problem.

1. This EDP tester has intelligent screen parameter configuration function, 6-bit screen uses 01, 8-bit screen uses 02. In general, the screen with 1920 * 1080 resolution and above uses 02, and the screen with 1920 * 1080 resolution and below uses 01. When you don't know the resolution, you can try 02 first. In all EDP screens, about 10% of the screens can not match the intelligent screen parameters, so it is necessary to use the accurate screen parameter number.

2. For the configuration of accurate screen reference number, first search the LCD screen model to be tested in Baidu to determine the screen type and resolution. Then query the corresponding number. Each resolution is divided into 6-digit and 8-digit, with a total of 6 numbers. It is generally recommended to use 8-digit screen reference number first.

3 EDP screen is usually 30 pins with 0.5 spacing. The standard line of the screen tester can measure 80% EDP screen with 1920 * 1080 resolution and below, which is different from LVDS screen. The screen with 2K resolution or above and the screen line with standard configuration can not be tested normally needs to be made by hand, and the LCD screen needs to be provided at the same time. Generally, it is connected to ports a, C and D of the tester. When the screen is bright, but the screen is flashing or black, port B, C and D are used. If some manual lines do not have port C, only port B and D are needed. The standard line of EDP screen whose screen model starts with vvx can't be applied, so it must be done manually again. Au screen containing b116htn, b133htn, b140htn and b156htn can be normally displayed with B, C and D. Qimei's n133hse-ea3 / EB3 can be displayed normally only with B, C and D.

4. If a, C, D or B, C, D glass signal image display is normal but the backlight is not bright, it means that the screen does not have its own backlight boost module, and it needs to do the screen connecting line and external constant current board manually.

ZOTEK ZT203 6000 Counts Pen-type Digital Multimeter True RMS Auto Range DC/AC Voltage Meter Voltmeter with Backlight

Description:

This is battery-powered, true RMS, auto-ranging, pen-type digital multimeter with 6000

counts backlight LCD display.

Five functional buttons instead of the traditional rotary switch enable one-hand operation.

This product is made of high quality material and durable, which can prevent breakage.

Features:

5 functional buttons: instead of the traditional rotary switch, 5 buttons can make you

measurements more convenient and efficient.

True RMS: The RMS/DC transform avoids the influence of voltage waveform distortion can test high accuracy.

LCD Display: 6000 counts digital LCD display offers large test rang as well as clear readings.

7 Test Modes: used to test DC & AC voltage, capacitance, resistance, frequency, continuity,

diode and NCV.

Humanized Design: it comes with auto power off, data hold, auto/manual range.

Specifications:

Material: Plastic

Display: LCD display with backlight

DC Voltage Range: 60mV/600mV/6V/60V/600V/1000V

AC Voltage Range: 60mV/600mV/6V/60V/600V/750V

Resistance Range: 600O/6kO/60kO/600kO/6MO/60MO

Capacitance Range: 9.999nF/99.99nF/999.9nF/9.999F/99.99F/999.9F/9.999mF

Frequency: 99.99Hz/999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999MHz

Diode: yes

Continuity: yes

NVC: yes

Maximum display: 6000

Automatic range/manual range: yes

True effective value: yes

Data retention: yes

Flashlight: yes

Low battery tip: yes

Automatic shutdown: yes

Relative value measurement: yes

Supply power: 2 x 1.5V AAA batteries (not included)

Item dimension:

Item Size: 20.2cm x 5.1cm x 3.4cm/7.6 x 2 x 1.3in

Item Weight: 114g/4oz

Package information:

Package Size: 23.2* 9 * 5.5cm / 9.1 * 3.5 * 2.7in

Package Weight: 267g/9.4oz

Gift box package

Package List:

1 x Digital Multimeter

1 x Pair of Test Leads

1 x Black soft case

1 x User Manual(English)

TV160 LVDS FPC Conversion Link Board for LG CHIMEI Samsung HDTV

TV160 LVDS Conversion Link Board for 7th 4K 51Pin

KWS-1705A USB Multifunction Tester

More Similar Products

1 Pair 1000V 20A Universal Digital Multimeter Meter Probe Test Leads 3mm Pin Red + Black

Features :

100% brand new and high quality.

The anterior gold-plated design, in the test, the sensitivity of pens and higher and more accurate.

22mm Plug Insertion Depth.

Up to 20A / 1000V

Material: PVC and Alloy

Color: Black + Red

Package includeds :

1 x Pair of Digital Multimeter Meter Probe

QK0826C

QK-6M30B Samsung Adapter plate 120HZ_PL.MS6M30K.1

UT612 LCR Meter

Features

1. 26-segment analog bar graph

2. Series/parallel mode (selectable)

3. 5 frequency tests selectable (100Hz/120Hz/1kHz/10kHz/100kHz)

4. Open/short circuit calibration compensation

5. Smart selection mode for fast selection of components

6. Mini-USB transmission to PC

7. Deviation ratio measurement

8. Data hold, LCD backlight, auto power off

9. relative mode

10. Loss factor (D), quality factor (Q), phase angle (?), equivalent series resistance (ESR), equivalent parallel resistance (EPR) and DCR DC resistance measurements

Product parameters

pecifications Range Best Accuracy

Model UT612

Inductance (H) 20uH~2000H (0.5%+5)

Capacitance (F) 200pF~20mF (0.5%+5)

Resistance (O) 20O~200MO (0.3%+5)

Test Frequency (Hz) 100Hz/120Hz/1kHz/10kHz/100kHz v

Operational Voltage 0.6Vrms v

Test Parameters L/C/R/DCR/Q/D/?/ESR v

Features

Display Count 20000

D/Q Display Count 2000

D/Q Resolution 0.001 v

Auto Range v

Real-Time Display Test Frequency v

Measurement Mode Series/Parallel v

Auto Power Off v

Low Battery Indication =6.8V v

Data Hold v

Relative Mode v

USB Interface v

USB Interface/PC Data Records 60000

LCD Backlight v

Analog Bar Graph 26

Deviation Ratio Measurement v

Comparsion Function v

Calibration Function v

Output Impedance 120O v

Auto LCR Smart Check and Measurement v

General Characteristics

Power 9V Battery (6F22) or USB

LCD Size 40mm X 63mm

Product Colour Red and Grey

Product Net Weight 374g

Product Size 96mm X 193mm X 47mm

Standard Accessories Battery, SMD Test Clamp, USB Interface Cable, Multi-Purpose Socket, PC Software CD

Standard Individual Packing Gift Box, English Manual

Notice: Battery was not included for air shipping, please prepare it by yourself.

Features:

Measuring range : -50~380? (-58~716?)

Accuracy : 1.5? / 1.5%

Resolution : 0.1? or 0.1?

Distance spot ratio : 12 : 1

Emissivity : 0.95 (fixed)

?/? unit selectable

Auto power off & Data Hold

Laser ON/OFF selectable

backlight ON/OFF selectable

Red Laser Power : less than 0.5 MW

Power supply : 2 x 1.5V AAA battery (Not included.)

Product Dimension : 140 x 85 x 35mm (L x W x H)

Package includes :

1x GM320 Infrared Thermometer

1 x User Manual

0-300V Smart-Fit Voltage Backlight Tester Tool for All Size LED LCD TV Laptop Detect Repair

LED LCD TV backlight problems are always increasingly common. As we know, slight tension Change can have a great impact on TV function. To have a useful tool which is as LED LCD Backlight tester. Using this tool, you can use the LED LCD screen backlight problem quickly. With the function, operating voltage, you can use the exact problem. If there is something wrong with LED light group, you can use it or replace the bad LED beads.

Product description:

Model No.: DLV300

Input voltage: 85-265 V international general

Output voltage: 0-300 V

Notice:

Please, if you are used to the LED lamps finished, unplug the power supply before!

Because it is likely to form a loop, which in Abnormal test!

Additional application:

The capacitance voltage

The voltage regulator

worth 3 lamp drive voltage test!

Examination skills:

Plug IN POWER, it can be used after 5 to 10 seconds (first time, the machine needs to warm up!).

Soft Start mode make the backlight brighter always slow.

No burning, if you can not make the "+" and "-", do not connect the probes to the LED will be tested for a long time.

Open ciruit protection: Do not touch the output terminal of probes for a long time. It is safe for Touch the probes in the shortest time.

Double isolate design makes our testers safety with high strength and flame retardant materials.

Safe / smart / precise / highly efficient

Double isolated safe protection no burning, no electric shock, voltage and current intellgent setting,

High brightness disassemble no need.

Single LED light bar backlight check:

make sure the anode and acthode.

connect the probes to the anode and the cathode.

light up the single LED light bar backlight.

light up the double LED light bar backlight.

Package include:

1x Tester

2X gold plated pin

1x Power Cable

Attention:

The more quantity, the lower price. Please contact us for details.

QK0803D