• Show Sidebar

There are 362 products.

Active filters

  • Categories: Programmer & Sockets

IC Chip Extractor Rework Station Hot Motherboard Circuit Board Component Puller Tweezer Tool for Welding Solder Soldering Iron

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH001543
€2.70

IC Chip Extractor Rework Station Hot Motherboard Circuit Board Component Puller Tweezer Tool for Welding Solder Soldering Iron

Lattice USB download line FPGA CPLD ISP download simulation HWUSBN2A

Lattice USB download line FPGA CPLD ISP download simulation HW-USBN-2A

Login to Download: Download software

Features:

1. Using Lattice original design, to ensure the use of stable and reliable;

2. Support wide target voltage 1.2V- 5V;

3.USB power supply, no external power supply alone;

4. Supports all LATTICE development environments (LSC ISPVM, LATTICE DEMIOND, LATTICE ISPEVER, and LATTICE PROGRAMMER);

Supports a full range of Lattice FPGAs such as SC (M) / XP / XP2 / ECP2 (M) / ECP3 / ECP5 (G) / MachXO / MachXO2 / MachXO3 / ICE40 series;

6. Support Lattice full range of CPLDs, such as 1000/2000/4000 / ispMACH series;

7. Support JTAG, internal FLASH, SPI FLASH programming mode;

8. No need to install a separate driver, direct support for Diamond / ispLever6.x / 7.x / classic / ispVM various versions of drivers;

9. Has a current-limit input, ESD protection measures to ensure that the download line is complete;

10. Using Lattice official 2 * 5Pin pitch 2.54mm JTAG interface;

11. Support operating system Win2000 / XP, Windows7 / 8/10, Linux and so on

Download Wire Pin Description:

1.SCLK / TCK: connect with chip's SCLK / TCK pin;

2.GND: Downloader and the target board of the public, its internal 2,4-pin connection, in use, need to be a 2,4 feet connected to the target board;

3.MODE / TMS: with the chip's MODE / TMS pin connection;

4.GND: Downloader and the target board of the public, the internal 2,4-pin connection, in the need to use these two in a 2,4 feet connected to the target board;

5. SDI / TDI: SDI / TDI pin connection with the chip;

6.VCC: Used to detect whether the target board connected to the downloader is powered on or not used to power the target board. The official downloader does not have the ability to supply power to the target board. This needs attention;

7.SDO / TDO: SDO / TDO pin connection with the chip;

8.INTI: need to connect INTI pins when downloading and debugging some chips, not every chip needs to be connected;

9.TRST: In some chip download debugging need to connect TRST pin, not every chip needs to connect;

10.ispEN / Enable / PROG: It is necessary to connect the ispEN / Enable / PROG pins when downloading and debugging some chips, and not every chip needs to be connected.

Shipping list:

1.Lattice USB download cable (1)

2.USB 2.0 data cable (1)

3.10P 2.54MM spacing of the cable (1)

4.10P high-quality lattice special fly line (1)

5.2.54mm pitch 2X5 turn 8P standard definition line (1)

CH001589
€21.01

Lattice USB download line FPGA CPLD ISP download simulation HW-USBN-2A

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel

Gauge Evaluator

Login to Download: * EV2300a Device Driver Installer Multilanguage

Model No: EV2300 HPA002

Included:

1 x Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

Description:

The EV2300 is a USB-based interface board for a PC that can be used to evaluate battery fuel gauge circuits designed with Texas Instruments' ICs. The EV2300 has connections on it for a USB cable and also accepts inputs from a battery fuel gauge circuit's communication port (SMBus or HDQ). By running the appropriate PC software for the correspondingfuel gauge IC, the EV2300 interface board allows the user to evaluate the battery fuel gauge circuit. Note: The driver on this page is for 32 bit Windows. See the 64 bit driver e2e post for 64 bit Windows 7 driver information.

Feature:

USB-based interface board for evaluation of battery fuel gauge circuits developed with fuel gauge ICs using the HDQ and SMBus communication protocol

Provides interface between intelligent battery circuit and a Windows-based PC

Connects to the USB port of a PC

Allows for on screen display and programming of gas gauge register functions when used with the appropriate PC software

CH001659
€128.05

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

XGecu T56 Universal Programmer Support NANDEMMCMCUISP

XGecu T56 Universal Programmer Support NAND/EMMC/MCU/ISP

Login to Download: Download software Device Support List instruction manual

Programmer Overview

1.1 Performance Introduction

Carefully built low-cost professional programmer, high-density chip production process, a

unified user interface, easy to use, functional integrity, application software, reliable

operation, code small, faster execution. supported operating system:

WINXP WIN2003 WIN2008 VISTA WIN7 WIN8 WIN10 32-bit or 64-bit operating system

? The programming speed is greatly improved. It is suitable for small batch production and supports 4 programmers for one computer.

? A wide range of chip support, the initial version supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test, 54/74 and CMOS4000 integrated circuit integrated functional test.

Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits.

25 series Nor Flash capacity support to 512Mbits.

? Pin contact check function, poor contact pin can pinpoint

? Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming

without external power integrated programmer. Portable performance super: the world's smallest volume, size 10CM * 6CM * 2.5CM, only the size of the driver's license.

? Programmable VCC from 1.8V to 6.5V, VPP from 1.8V to 18V chip

? Chip serial number secondary development functions: Programmer built a variety of commonly used automatic numbering function. And can use a custom algorithm to achieve any sequence number through DLL dynamic library. This feature allows you to produce

a unique identification info rmation for each chip in mass production. The logo can also be encrypted with a custom algorithm to more effectively protect your product's rights.

? Universal serial programming interface ICSP (to support both high-voltage parallel programming and low-volt age serial programming). Note: ICSP now supports 24-Series 25 Series 93 Series Serial Integrated Circuits, ATMEL89S51,52, AVR ATMEGAxxx Full

Series, and MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx Full Series, and the new series of SYNCMOS SM59Dxx SM59Rxx fu ll range chips for in-circuit serial programming.

? Powerful 54 / 74F / LS / HC CMOS4000 Series Integrated Functionality Tests: The First Development Programmer to Test Common Logic ICs True, Test Errors Locating Logic Gate Circuits, Test Arbitrary Possible input combinations.

1.2 Programmer chip support range

? Variety of 26 27 28 29 37 39 49 50 series of parallel ROM, EPROM, EEPROM

Fast, full support. Support TSOP32 TSOP40 TSOP48 chips to 64MBits, will join the TSOP56 pin support.

(TL866II programming voltage VPP only supports up to 18V, for early 27C series ROM, the

chip with 21V 25V VPP voltage no longer supports writing, but can be read. If it is used,

the VPP with the same type of programming voltage can be used as 13V or 12V chip replacement, for example: 27C32 21V or 13V Vpp chip,Pay attention to the VPP voltage)

? 24 25 35 45 85 93 95 Series Serial EEPROM

Serial Series Chip Support Full, Supports Chip Capacity 25 Series 8 or 16PIN to 512MBits (64M Bytes)

? NAND FLASH chip supports up to 8Gbits

? MCU series, hundreds of models of 51 series of microcomputer

? AVR microcontroller package scratch ATMEGA series ATtiny series AT90XXX series of microcontrollers, all AVR ATMEGAxxx chip also supports the ICSP interface for SPI serial download programming. Support AVR one-to-one soft-key with RC correction byte.

? MICROCHIP PIC10 PIC12 PIC16 PIC18 Series Microcontroller:

PIC series of more than 300 models, more than 900 package chip support, currently supports

one of the most complete PIC chip integrated programmer. For vario

us types of PIC monolithic, in strict accordance with the manufacturer's manual requirements, the optimal programming, programming speed is excellent. The vast majority of chips support both ISCP online programming and programming through programming sockets.

? GAL programmable logic device programming

? SRAM test

Support for common 24 61 62 DS12 series SRAM test, respectively, to data line testing,

address line testing, memory unit incremental testing and unit testing.

? Super performance 54 / 74F / LS / HC CMO

S4000 series integrated circuit integrated

Function test:

The first development-type programmer to really test common logic ICs to test for errors

that can be located to logic gates, and to test any possible combinations of inputs in an integrated circuit when testing.

CH001701
€159.13

XGecu T56 Universal Programmer Support NAND/EMMC/MCU/ISP

LA1010 USB Logic Analyzer 100M Max Sample Rate 16 Channel MCUARMFPGA Deb

Description:

LA1010 is a logic analyzer product with high cost performance. It has 16 input channels and the sample rate is up to 100MHz.

Along with the PC software KingstVIS, 16 channels of digital signal could be sampled at the same time, and then they could be

converted to digital waveform and displayed on the PC screen. The signal could be analyzed with many standard protocols,

to get more straightforward communication data. It helps a lot in testing and analyzing digital system(MCU/ARM/FPGA, etc.),

developing and debugging several communication programs, or monitoring and recording some digital signals for a long time.

Software and user manual: http://www.kingst.org/download/?fl=vis.zip

Features:

Portable and lightweight

Max sampling rate: 100M@3channels, 50M@6channels, 32M@9channels, 16M@16channels

Large sampling depth and support compression

The built-in PWM generator

Compatible USB2.0/3.0 interface

Powerful software and easy to use

Support online upgrade automatically

Specifications:

Input channels number: 16

Max sampling rate: 100M

Measurement bandwidth: 20M

Min pulse width can be captured: 20ns

Max sampling depth: 10G/channel

Input voltage range: -50V ~ +50V

Input impedance: 220KO, 12pF

Adjustable threshold voltage: -4V ~ +4V, step: 0.01V

PWM channels number: 2

PWM frequency range: 0.1 ~ 10MHz

PWM frequency adjust step: 10ns

PWM pulse width adjust step: 10ns

PWM output voltage: +3.3V

PWM output impedance: 50O

Standby current: 100mA

Max operating current: 150mA

Dimensions: 95mm * 55mm * 23mm

Supported OS: Windows XP, Vista, Windows 7/8/10(32/64bit)

Supported standard protocols: UART/RS-232/485, I2C, SPI, CAN, DMX512, HDMI CEC, I2S/PCM, JTAG,

LIN, Manchester, Modbus, 1-Wire, UNI/O, SDIO, SMBus, USB1.1, PS/2, NEC InfraRed, Parallel, etc...

Package included:

1 x LA1010 Host

2 x 9P Flat Cable

1 x 2P Flat Cable

20 x Test Hook

1 x USB Cable

1 x CD

CH001706
€78.32

LA1010 USB Logic Analyzer 100M Max Sample Rate 16 Channel MCU/ARM/FPGA Deb

QFN32 55 0.5 Adapters MLP32 chip test Adapters to DIP Programmer

Product use:

The universal programming block and universal test stand are used to write and test the IC chip of QFN32

Applicable package:

MLF32/QFN32, pin spacing 0.5mm; support chip at the bottom of the package with pin function

Test Adapters:

QFN-32 (40) BT-0.5-02

Characteristic:

Draw all PIN from both sides; compatible with 2.54mm universal board; use special long head to support wire or insert user board; test seat belt center pin

Product description:

Pin spacing e (mm): 0.5

Pin: 32

D*E(mm): 5*5

A(mm): 1

CH001718
€68.00

QFN32 (5*5) -0.5 Adapters MLP32 chip test Adapters to DIP Programmer

IC Chip Extractor Rework Station Hot Motherboard Circuit Board Component Puller Tweezer Tool for Welding Solder Soldering Iron

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH001543
€2.70

IC Chip Extractor Rework Station Hot Motherboard Circuit Board Component Puller Tweezer Tool for Welding Solder Soldering Iron

Lattice USB download line FPGA CPLD ISP download simulation HWUSBN2A

Lattice USB download line FPGA CPLD ISP download simulation HW-USBN-2A

Login to Download: Download software

Features:

1. Using Lattice original design, to ensure the use of stable and reliable;

2. Support wide target voltage 1.2V- 5V;

3.USB power supply, no external power supply alone;

4. Supports all LATTICE development environments (LSC ISPVM, LATTICE DEMIOND, LATTICE ISPEVER, and LATTICE PROGRAMMER);

Supports a full range of Lattice FPGAs such as SC (M) / XP / XP2 / ECP2 (M) / ECP3 / ECP5 (G) / MachXO / MachXO2 / MachXO3 / ICE40 series;

6. Support Lattice full range of CPLDs, such as 1000/2000/4000 / ispMACH series;

7. Support JTAG, internal FLASH, SPI FLASH programming mode;

8. No need to install a separate driver, direct support for Diamond / ispLever6.x / 7.x / classic / ispVM various versions of drivers;

9. Has a current-limit input, ESD protection measures to ensure that the download line is complete;

10. Using Lattice official 2 * 5Pin pitch 2.54mm JTAG interface;

11. Support operating system Win2000 / XP, Windows7 / 8/10, Linux and so on

Download Wire Pin Description:

1.SCLK / TCK: connect with chip's SCLK / TCK pin;

2.GND: Downloader and the target board of the public, its internal 2,4-pin connection, in use, need to be a 2,4 feet connected to the target board;

3.MODE / TMS: with the chip's MODE / TMS pin connection;

4.GND: Downloader and the target board of the public, the internal 2,4-pin connection, in the need to use these two in a 2,4 feet connected to the target board;

5. SDI / TDI: SDI / TDI pin connection with the chip;

6.VCC: Used to detect whether the target board connected to the downloader is powered on or not used to power the target board. The official downloader does not have the ability to supply power to the target board. This needs attention;

7.SDO / TDO: SDO / TDO pin connection with the chip;

8.INTI: need to connect INTI pins when downloading and debugging some chips, not every chip needs to be connected;

9.TRST: In some chip download debugging need to connect TRST pin, not every chip needs to connect;

10.ispEN / Enable / PROG: It is necessary to connect the ispEN / Enable / PROG pins when downloading and debugging some chips, and not every chip needs to be connected.

Shipping list:

1.Lattice USB download cable (1)

2.USB 2.0 data cable (1)

3.10P 2.54MM spacing of the cable (1)

4.10P high-quality lattice special fly line (1)

5.2.54mm pitch 2X5 turn 8P standard definition line (1)

CH001589
€21.01

Lattice USB download line FPGA CPLD ISP download simulation HW-USBN-2A

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel

Gauge Evaluator

Login to Download: * EV2300a Device Driver Installer Multilanguage

Model No: EV2300 HPA002

Included:

1 x Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

Description:

The EV2300 is a USB-based interface board for a PC that can be used to evaluate battery fuel gauge circuits designed with Texas Instruments' ICs. The EV2300 has connections on it for a USB cable and also accepts inputs from a battery fuel gauge circuit's communication port (SMBus or HDQ). By running the appropriate PC software for the correspondingfuel gauge IC, the EV2300 interface board allows the user to evaluate the battery fuel gauge circuit. Note: The driver on this page is for 32 bit Windows. See the 64 bit driver e2e post for 64 bit Windows 7 driver information.

Feature:

USB-based interface board for evaluation of battery fuel gauge circuits developed with fuel gauge ICs using the HDQ and SMBus communication protocol

Provides interface between intelligent battery circuit and a Windows-based PC

Connects to the USB port of a PC

Allows for on screen display and programming of gas gauge register functions when used with the appropriate PC software

CH001659
€128.05

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

XGecu T56 Universal Programmer Support NANDEMMCMCUISP

XGecu T56 Universal Programmer Support NAND/EMMC/MCU/ISP

Login to Download: Download software Device Support List instruction manual

Programmer Overview

1.1 Performance Introduction

Carefully built low-cost professional programmer, high-density chip production process, a

unified user interface, easy to use, functional integrity, application software, reliable

operation, code small, faster execution. supported operating system:

WINXP WIN2003 WIN2008 VISTA WIN7 WIN8 WIN10 32-bit or 64-bit operating system

? The programming speed is greatly improved. It is suitable for small batch production and supports 4 programmers for one computer.

? A wide range of chip support, the initial version supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test, 54/74 and CMOS4000 integrated circuit integrated functional test.

Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits.

25 series Nor Flash capacity support to 512Mbits.

? Pin contact check function, poor contact pin can pinpoint

? Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming

without external power integrated programmer. Portable performance super: the world's smallest volume, size 10CM * 6CM * 2.5CM, only the size of the driver's license.

? Programmable VCC from 1.8V to 6.5V, VPP from 1.8V to 18V chip

? Chip serial number secondary development functions: Programmer built a variety of commonly used automatic numbering function. And can use a custom algorithm to achieve any sequence number through DLL dynamic library. This feature allows you to produce

a unique identification info rmation for each chip in mass production. The logo can also be encrypted with a custom algorithm to more effectively protect your product's rights.

? Universal serial programming interface ICSP (to support both high-voltage parallel programming and low-volt age serial programming). Note: ICSP now supports 24-Series 25 Series 93 Series Serial Integrated Circuits, ATMEL89S51,52, AVR ATMEGAxxx Full

Series, and MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx Full Series, and the new series of SYNCMOS SM59Dxx SM59Rxx fu ll range chips for in-circuit serial programming.

? Powerful 54 / 74F / LS / HC CMOS4000 Series Integrated Functionality Tests: The First Development Programmer to Test Common Logic ICs True, Test Errors Locating Logic Gate Circuits, Test Arbitrary Possible input combinations.

1.2 Programmer chip support range

? Variety of 26 27 28 29 37 39 49 50 series of parallel ROM, EPROM, EEPROM

Fast, full support. Support TSOP32 TSOP40 TSOP48 chips to 64MBits, will join the TSOP56 pin support.

(TL866II programming voltage VPP only supports up to 18V, for early 27C series ROM, the

chip with 21V 25V VPP voltage no longer supports writing, but can be read. If it is used,

the VPP with the same type of programming voltage can be used as 13V or 12V chip replacement, for example: 27C32 21V or 13V Vpp chip,Pay attention to the VPP voltage)

? 24 25 35 45 85 93 95 Series Serial EEPROM

Serial Series Chip Support Full, Supports Chip Capacity 25 Series 8 or 16PIN to 512MBits (64M Bytes)

? NAND FLASH chip supports up to 8Gbits

? MCU series, hundreds of models of 51 series of microcomputer

? AVR microcontroller package scratch ATMEGA series ATtiny series AT90XXX series of microcontrollers, all AVR ATMEGAxxx chip also supports the ICSP interface for SPI serial download programming. Support AVR one-to-one soft-key with RC correction byte.

? MICROCHIP PIC10 PIC12 PIC16 PIC18 Series Microcontroller:

PIC series of more than 300 models, more than 900 package chip support, currently supports

one of the most complete PIC chip integrated programmer. For vario

us types of PIC monolithic, in strict accordance with the manufacturer's manual requirements, the optimal programming, programming speed is excellent. The vast majority of chips support both ISCP online programming and programming through programming sockets.

? GAL programmable logic device programming

? SRAM test

Support for common 24 61 62 DS12 series SRAM test, respectively, to data line testing,

address line testing, memory unit incremental testing and unit testing.

? Super performance 54 / 74F / LS / HC CMO

S4000 series integrated circuit integrated

Function test:

The first development-type programmer to really test common logic ICs to test for errors

that can be located to logic gates, and to test any possible combinations of inputs in an integrated circuit when testing.

CH001701
€159.13

XGecu T56 Universal Programmer Support NAND/EMMC/MCU/ISP

LA1010 USB Logic Analyzer 100M Max Sample Rate 16 Channel MCUARMFPGA Deb

Description:

LA1010 is a logic analyzer product with high cost performance. It has 16 input channels and the sample rate is up to 100MHz.

Along with the PC software KingstVIS, 16 channels of digital signal could be sampled at the same time, and then they could be

converted to digital waveform and displayed on the PC screen. The signal could be analyzed with many standard protocols,

to get more straightforward communication data. It helps a lot in testing and analyzing digital system(MCU/ARM/FPGA, etc.),

developing and debugging several communication programs, or monitoring and recording some digital signals for a long time.

Software and user manual: http://www.kingst.org/download/?fl=vis.zip

Features:

Portable and lightweight

Max sampling rate: 100M@3channels, 50M@6channels, 32M@9channels, 16M@16channels

Large sampling depth and support compression

The built-in PWM generator

Compatible USB2.0/3.0 interface

Powerful software and easy to use

Support online upgrade automatically

Specifications:

Input channels number: 16

Max sampling rate: 100M

Measurement bandwidth: 20M

Min pulse width can be captured: 20ns

Max sampling depth: 10G/channel

Input voltage range: -50V ~ +50V

Input impedance: 220KO, 12pF

Adjustable threshold voltage: -4V ~ +4V, step: 0.01V

PWM channels number: 2

PWM frequency range: 0.1 ~ 10MHz

PWM frequency adjust step: 10ns

PWM pulse width adjust step: 10ns

PWM output voltage: +3.3V

PWM output impedance: 50O

Standby current: 100mA

Max operating current: 150mA

Dimensions: 95mm * 55mm * 23mm

Supported OS: Windows XP, Vista, Windows 7/8/10(32/64bit)

Supported standard protocols: UART/RS-232/485, I2C, SPI, CAN, DMX512, HDMI CEC, I2S/PCM, JTAG,

LIN, Manchester, Modbus, 1-Wire, UNI/O, SDIO, SMBus, USB1.1, PS/2, NEC InfraRed, Parallel, etc...

Package included:

1 x LA1010 Host

2 x 9P Flat Cable

1 x 2P Flat Cable

20 x Test Hook

1 x USB Cable

1 x CD

CH001706
€78.32

LA1010 USB Logic Analyzer 100M Max Sample Rate 16 Channel MCU/ARM/FPGA Deb

QFN32 55 0.5 Adapters MLP32 chip test Adapters to DIP Programmer

Product use:

The universal programming block and universal test stand are used to write and test the IC chip of QFN32

Applicable package:

MLF32/QFN32, pin spacing 0.5mm; support chip at the bottom of the package with pin function

Test Adapters:

QFN-32 (40) BT-0.5-02

Characteristic:

Draw all PIN from both sides; compatible with 2.54mm universal board; use special long head to support wire or insert user board; test seat belt center pin

Product description:

Pin spacing e (mm): 0.5

Pin: 32

D*E(mm): 5*5

A(mm): 1

CH001718
€68.00

QFN32 (5*5) -0.5 Adapters MLP32 chip test Adapters to DIP Programmer