Buy Limit Frame: * 11.5*13mm, 12*16mm, 12*18mm, 14*18mm

Product Characteristics

1. Using standard SD interface mode, the corresponding operation such as test or burning can be realized by connecting card reader with computer or through SD interface of programmer.

2. Compatible with ball-and-ball testing, IC limit frame is molded in one. It can be replaced by different size limit frame according to IC, so that IC of different size can be used universally.

3. Supporting hot plug-in and testing for PIN connection through SD interface or through connection with board row;

4. PCB adopts four-layer circuit structure to reduce the instability of test caused by signal interference. The golden finger is plated with thick gold to ensure durability and contact.

5. At the same time compatible: Toshiba, Samsung, Hynix, Intel, Sandisk and other brand IC;

6. Compatible with 153-FBGA 169-FBGA;

7. The shrapnel is stamped by imported beryllium copper through high precision die, the head-shaped probe is designed, and the later stage is hardened and plated with thick gold layer to ensure the stability and durability of the product.

8. The whole structure of the contact module reduces the repetitive positioning problem, ensures the precise alignment between the contact point and the IC PAD, and has a high pass rate in one test.

9. The through-hole welding structure is adopted to ensure good contact, and the positioning holes of SOCKET and PCBA are precisely positioned to facilitate replacement.

10. The top-window structure is adopted, which is compatible with manual and automatic testing and easy to operate.

11. Pressure IC adopts self-adapting structure of integral moulding and spring, which ensures that IC with different thickness does not need any adjustment to ensure good contact and wide universality of IC for testing.

12. The structure is formed by injection moulding, with precise positioning, easy access to IC and higher working efficiency.

Model: CX3001/DX3001/EX3001/GX3001

Description: QFP32

CHIP PROGRAMMER SOCKET TQFP44 TO DIP44 adapter socket support ATMEGA8 series

Description:

Best quality, QFP44 to 44Dip Adapter

Suitable for QFP44 IC

patch size : 0.8mm 10mm * 10mm

Feature:

Support Atmel Atmega TQFP44 device

eg.mega328 mega8A mega48 mega8 mega88 mega16 mega162 mega168

Comes with AVRISP header, directly connect to AVRISP, USBASP, MkII, for direct burning of firmware or arduino bootloaders

Crysal header so that crystal can be replaced easily

Convert to DIP44 Atmega328 format, Pin to pin comptabile with Atmega DIP44 MCU format

Package included:

Programmer Adapter QFP44 to DIP44

Note:

Type A: Use for XELTEK USB Programmer - Overlapping

Type B: Use for TNM5000 Programmer - Pin to Pin

OTS-16-03 Programmer Adapter SOP16-DIP16 Socket (150mil)

1.TSOP32 base board

2.SOP56 base board

3.TSOP48/SOP44 2-in-1 base board,

4.TSOP40A base board,

5.TSOP40B base board,

6.TSOP32/40/48 soldering top board.

7.TSOP48 ZIF socket top board

8.PSOP44 ZIF socket top board

XELTEK SuperPro 6100N (so not 6100)Universal Programmer 100,000+ devices supported

Login to Download: Download software

SuperPro 6100N is a cost-effective, reliable, and high-speed universal chip programmer. It is designed to communicate using USB 2.0 port for development requirement and can also work in standalone mode (without connecting to a PC) for production requirement. It has the largest device support count in the programming industry with 144 pin drivers to support high pin count chips.

Application and target customers: Programming houses, electronic repair, car repair shops, forensic and data recovery companies, medical devices, requirement for larger device support.

Advantages of SuperPro 6100N

Ultra Fast Programming Speed SuperPro 6100 is designed with high programming speed in mind. Our semiconductor manufacturer approved algorithms, precision and clean signals guarantee high programming yield. Special design was made to eliminate overshoot and ground bounce. Algorithms are performed with state machine architecture constructed with FPGA to achieve a ultra-high programming speed.

Largest Device Support Located in Silicon Valley, we keep good relationships with many major IC companies that are important for us to continuously support new devices. SuperPro 6100 currently supports more than 100,000 devices, which is the largest device library in the programming industry. Requested device algorithms can be added within a week - average lead time from other manufacturers is over two months.

Built-in 144 Pin Driver Most universal IC programmers are designed with 48 pin driver or less. Programmers with a 48 pin driver design need special adapters (pin mapping) to accommodate devices with more than 48 pins. Bottom boards needed for pin mapping can quickly increase production costs just to support one package type. SuperPro 6100N is equipped with a built-in universal 144 pin driver to accommodate large pin count devices. One universal adapter accommodates all devices with the same package type.

Stand-Alone Mode Unlike many other universal programmers in the industry, SuperPro 6100N is capable of operating in stand-alone mode. Under stand-alone mode, SuperPro 6100 can be operated by an inexperienced operator with minimal training. Once the project file is selected, the operator only has to insert a blank chip and remove the programmed chip upon beeping. This ensures a minimal chance that an operator will make a mistake. Users can also use clusters of stand-alone programmers to achieve high volume production. Last but not the least, stand-alone mode saves both the cost of PC and labor of the trained and qualified operator.

Tester for Logic Devices and SRAMs In addition to having a large device library, SuperPro 6100 programmer is also designed for IC testing of varioudevices such as TTL, CMOS Logic (74/4000 series), and SRAM memory devices.

Hardware and Electrical Specifications

Devices supported

EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU

Package types supported

DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON, EBGA, FBGA, FTBGA, VFBGA, BGA, CSP, SCSP, QFN, HVQFN etc.

PC interface

USB 2.0

Stand-alone memory

Compact FLASH Card

Power supply

AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

Dimensions

Main unit: 148(L) x 216(W) x 94(H) mm

Package: 301(L) x 252(W) x 145(H) mm

Weight

Main unit: Weight 3.5 lbs (1.6 Kg)

Package: Weight 6.2 lbs (2.8Kg)

Expanded Features

Operate multiple units to construct a concurrent multi-programming system. Cluster 1-15 units for flexible volume production.

Support devices with Vcc from 1.2V - 5V.

Support files up to 256 GB.

Over-current and over-voltage protection for safety of the chip and programmer hardware.

Only IC manufacturer approved programming algorithms used for high reliability.

Vcc verification (at +5% ~ -5% and +10% ~ -10%) enhances programming reliability.

Ac Acessories:

Main unit with a DIP48 adaptor, AC adaptor, USB2.0 cable, user manual, software CD, register card

Optional accessories: adaptor in varies packages, CF card for stand-alone operation.

Packing List:

1 * XELTEK SuperPro 6100N Programmer

1 * AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

1 * USB Cable

1 * CD Software

1 * DX0001 Adapter

1 * TSOP48 Adapter

1 * SOP28-DIP28 (300mil) Adaptador

1 * SOP20-DIP20 (200mil) Adaptador

1 * SOP8-DIP8 (200mil) Adaptador

1 * SOP16-DIP16 (150mil) Adaptador

1 * SOP8-DIP8 (150mil) Adaptador

1 * TSSOP8-DIP8 (170mil) Adaptador

1 * PLCC44-DIP44

1 * PLCC44-DIP40

1 * PLCC32-DIP32

1 * PLCC28-DIP28

1 * PLCC28-DIP24

1 * PLCC20-DIP20

1 * SOP8-DIP8 Simple Adaptador

1 * QFN8 WSON8 Simple Adaptador

1 * MSOP8/SSOP8/SOP8/SOP16-DIP16 Simple Adaptador

2 * SSOP4-28PIN 0.65mm / SOP4-28PIN 1.27mm Simple Adaptador

1 * LCD LED screen EDID code

1 * SOP8 Clamp Test

1 * IC Chip Extractor

Model:

QFP64/LQFP64/TQFP64-0.5 (compatible with XWDZ-QFP64-0.5/FPQ-64-0.5-06)

Product use:

Programming block and test stand, burning and testing the IC chip of QFP64.

Suitable for packaging:

QFP64 LQFP64 TQFP64 CQFP64 pin Pitch 0.5mm

Characteristic:

The bottom pin is fully led out by the chip, which is convenient for the two development.

Overall size of the seat:

Long 57mm, wide 50mm

Common: STM32 QFP64 encapsulation

STM32L1xxR series (e.g. STM32L151R8, STM32L152RB)

STM32F0xxR series (e.g. STM32F051RC, STM32F051RB)

STM32F1xxR series (e.g. STM32F103RC, STM32F100RB)

STM32F2xxR series (e.g. STM32F207RC, STM32F215RB)

STM32F3xxR series (e.g. STM32F303R8, STM32F373RB)

STM32F4xxR series (e.g. STM32F407RC, STM32F415RB)

Adapt to

Winbond:

W25Q10EW, W25Q20EW, W25Q20BW, W25Q40EW, W25Q40BW, W25Q80EW, W25Q80BW, W25Q16DW, W25Q16FW, W25Q32DW, W25Q32FW, W25Q64DW, W25Q64FW, W25F128FW...

MXIC:

MX25U5121E,MX25R512F,MX25U1001E,MX25R1035F,MX25U2033E,MX25R2035F,MX25U4035,

MX25U4033E,MX25U4032E,MX25R4035F,MX25U8035,MX25U8035E,MX25U8033E,MX25U8032E,

MX25R8035F,MX25U1635E,MX25V1635F,MX25U1635F,MX25R1635F,MX25U3235E,MX25U3235F,

MX25R3235F,MX25U6473F,MX25U6435F,MX25R6435F,MX25U12873F,MX25U12835F,

MX25U25635F,MX25U51245G,MX25UM51245G,MX66U51235F...

In package included: 

1pcs x socket RT-BGA100-01 V2.5

1pcs x Frame 14x18

Technical information:

1. Life span: ≥30,000 times

2. Material: PEI & PES

3. Temperature: -55°C~+170°C

DX3011-1 Adapter for XELTEK SuperPro 6100N

DX2028 Adapter for XELTEK SuperPro 6100N

OBDSTAR RFID Adapter

Product Name: Chip Reader

Product Data: IMMO for VW AUDI SKODA SEAT 4 & 5 GEN

Suits Products: Key Master DP/ X300 DP/ DP PAD/ Key Master/ X300 Pro3/ X100 Pro

The 4th and 5th generation for the programming of VW/AUDI/SKODA/SEAT are added as follows:

1. CDC+24C32 Types

2. NEC+24C32 Types

3. 2013 Johnson Types;

4. Motorola 9S12XHZ512 Types;

5. NEC+24C64 Color Screen- Type 1

6. NEC+24C64 Color Screen- Type 2

7. NEC+24C64 White Screen Type

8. NEC+24C64(VDO -12)Type

9. NEC+95320 Type

10. NEC+35XX Type

11. Magotan/ CC Type

12. Q7/A6L(C6)9S12DT(G)128 Type

13. Q7/A6L(C6)9S12DT(G)256 Type

14. Lifan Marvell models are added, which includes Add/Clear Keys, Program/Delete ESCL functions.

15. Jiangling MU-X models are added as key programming and key clearing.

Package includes:

1pc x OBDSTAR RFID Adapter