• Show Sidebar

There are 401 products.

Active filters

  • Categories: EFI Rom Cable
  • Categories: Laptop used parts, scrap parts
  • Categories: Programmer
  • Categories: Programmer & Sockets
wishlist
Compare
Quickview

LCD LED screen EDID code chip data read line 2in1 Cable online Reading Writing line for RT80x809H CH341A TL866CS TL866A TL866II

Supports all 24C02 programmers to read and write

2015 the latest design base without the need to replace the plug can burn to write LCD LED code ( Note : do not support Chi Mei screen)

Now many brands of notebooks for the same type of screen after the black screen and so on, almost all of the code to replace

To this end, we specially designed to read and write a piece of code on the computer tool to facilitate the maintenance staff to improve work efficiency

The screen is almost all 24C02 so as long as you are a programmer to support 24C02, then on behalf of the screen can be used on your programmer

For T809H, you need to reset it:

CH001448
€8.58

LCD LED screen EDID code chip data read line 2in1 Cable online Reading Writing line for RT809F RT809H CH341A TL866CS TL866A TL866II

wishlist
Compare
Quickview

RENESAS EZCUBE development tool artificial device rl78 r8c3x lx 78k0r 78k 0 v850jx3

Login to Download: »» Download Renesas emulator software «

Product Description

EZ-CUBE chip debugging emulator

EZ-CUBE is the chip debugging emulator, with flash memory programming function. Can be used for debugging programs or burn the program into theinternal flash micro controller.

- chip debugging

To debug is connected to the microcontroller target board.

- flash programmer

The program can be written to the built-in flash memory controller.

USB connection

Connecting to host through USB port 2.

The use of USB power supply operation. No additional power supply.

Supports a large number of products

EZ-CUBE can support Renesas Electronics 8 bit to 32 bit internal flash microcontroller.

78K0 micro controller

78K0R micro controller

RL78 micro controller

R8C micro controller

V850 micro controller

CH001516
€85.00

RENESAS EZ-CUBE development tool artificial device rl78 r8c3x lx 78k0r 78k 0 v850jx3
»» Download Renesas emulator software «

wishlist
Compare
Quickview

IC Chip Extractor Rework Station Hot Motherboard Circuit Board Component Puller Tweezer Tool for Welding Solder Soldering Iron

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH001543
€2.70

IC Chip Extractor Rework Station Hot Motherboard Circuit Board Component Puller Tweezer Tool for Welding Solder Soldering Iron

wishlist
Compare
Quickview

Lattice USB download line FPGA CPLD ISP download simulation HWUSBN2A

Lattice USB download line FPGA CPLD ISP download simulation HW-USBN-2A

Login to Download: Download software

Features:

1. Using Lattice original design, to ensure the use of stable and reliable;

2. Support wide target voltage 1.2V- 5V;

3.USB power supply, no external power supply alone;

4. Supports all LATTICE development environments (LSC ISPVM, LATTICE DEMIOND, LATTICE ISPEVER, and LATTICE PROGRAMMER);

Supports a full range of Lattice FPGAs such as SC (M) / XP / XP2 / ECP2 (M) / ECP3 / ECP5 (G) / MachXO / MachXO2 / MachXO3 / ICE40 series;

6. Support Lattice full range of CPLDs, such as 1000/2000/4000 / ispMACH series;

7. Support JTAG, internal FLASH, SPI FLASH programming mode;

8. No need to install a separate driver, direct support for Diamond / ispLever6.x / 7.x / classic / ispVM various versions of drivers;

9. Has a current-limit input, ESD protection measures to ensure that the download line is complete;

10. Using Lattice official 2 * 5Pin pitch 2.54mm JTAG interface;

11. Support operating system Win2000 / XP, Windows7 / 8/10, Linux and so on

Download Wire Pin Description:

1.SCLK / TCK: connect with chip's SCLK / TCK pin;

2.GND: Downloader and the target board of the public, its internal 2,4-pin connection, in use, need to be a 2,4 feet connected to the target board;

3.MODE / TMS: with the chip's MODE / TMS pin connection;

4.GND: Downloader and the target board of the public, the internal 2,4-pin connection, in the need to use these two in a 2,4 feet connected to the target board;

5. SDI / TDI: SDI / TDI pin connection with the chip;

6.VCC: Used to detect whether the target board connected to the downloader is powered on or not used to power the target board. The official downloader does not have the ability to supply power to the target board. This needs attention;

7.SDO / TDO: SDO / TDO pin connection with the chip;

8.INTI: need to connect INTI pins when downloading and debugging some chips, not every chip needs to be connected;

9.TRST: In some chip download debugging need to connect TRST pin, not every chip needs to connect;

10.ispEN / Enable / PROG: It is necessary to connect the ispEN / Enable / PROG pins when downloading and debugging some chips, and not every chip needs to be connected.

Shipping list:

1.Lattice USB download cable (1)

2.USB 2.0 data cable (1)

3.10P 2.54MM spacing of the cable (1)

4.10P high-quality lattice special fly line (1)

5.2.54mm pitch 2X5 turn 8P standard definition line (1)

CH001589
€21.01

Lattice USB download line FPGA CPLD ISP download simulation HW-USBN-2A

wishlist
Compare
Quickview

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel

Gauge Evaluator

Login to Download: * EV2300a Device Driver Installer Multilanguage

Model No: EV2300 HPA002

Included:

1 x Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

Description:

The EV2300 is a USB-based interface board for a PC that can be used to evaluate battery fuel gauge circuits designed with Texas Instruments' ICs. The EV2300 has connections on it for a USB cable and also accepts inputs from a battery fuel gauge circuit's communication port (SMBus or HDQ). By running the appropriate PC software for the correspondingfuel gauge IC, the EV2300 interface board allows the user to evaluate the battery fuel gauge circuit. Note: The driver on this page is for 32 bit Windows. See the 64 bit driver e2e post for 64 bit Windows 7 driver information.

Feature:

USB-based interface board for evaluation of battery fuel gauge circuits developed with fuel gauge ICs using the HDQ and SMBus communication protocol

Provides interface between intelligent battery circuit and a Windows-based PC

Connects to the USB port of a PC

Allows for on screen display and programming of gas gauge register functions when used with the appropriate PC software

CH001659
€128.05

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

LCD LED screen EDID code chip data read line 2in1 Cable online Reading Writing line for RT80x809H CH341A TL866CS TL866A TL866II

Supports all 24C02 programmers to read and write

2015 the latest design base without the need to replace the plug can burn to write LCD LED code ( Note : do not support Chi Mei screen)

Now many brands of notebooks for the same type of screen after the black screen and so on, almost all of the code to replace

To this end, we specially designed to read and write a piece of code on the computer tool to facilitate the maintenance staff to improve work efficiency

The screen is almost all 24C02 so as long as you are a programmer to support 24C02, then on behalf of the screen can be used on your programmer

For T809H, you need to reset it:

CH001448
€8.58

LCD LED screen EDID code chip data read line 2in1 Cable online Reading Writing line for RT809F RT809H CH341A TL866CS TL866A TL866II

wishlist
Compare

AK90 Key Programmer Adapter and 10Pin Cable Set

New For AK90+ Key Programmer Adapter and 10Pin Cable Set

Works together with For AK90+ key programmer.

Package List:

1pc x For AK90+ 10 Pin Cable

1pc x For AK90+ Chip data to read specific seat

CH001495
€22.25

AK90+ Key Programmer Adapter and 10Pin Cable Set

wishlist
Compare

RENESAS EZCUBE development tool artificial device rl78 r8c3x lx 78k0r 78k 0 v850jx3

Login to Download: »» Download Renesas emulator software «

Product Description

EZ-CUBE chip debugging emulator

EZ-CUBE is the chip debugging emulator, with flash memory programming function. Can be used for debugging programs or burn the program into theinternal flash micro controller.

- chip debugging

To debug is connected to the microcontroller target board.

- flash programmer

The program can be written to the built-in flash memory controller.

USB connection

Connecting to host through USB port 2.

The use of USB power supply operation. No additional power supply.

Supports a large number of products

EZ-CUBE can support Renesas Electronics 8 bit to 32 bit internal flash microcontroller.

78K0 micro controller

78K0R micro controller

RL78 micro controller

R8C micro controller

V850 micro controller

CH001516
€85.00

RENESAS EZ-CUBE development tool artificial device rl78 r8c3x lx 78k0r 78k 0 v850jx3
»» Download Renesas emulator software «

wishlist
Compare

IC Chip Extractor Rework Station Hot Motherboard Circuit Board Component Puller Tweezer Tool for Welding Solder Soldering Iron

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH001543
€2.70

IC Chip Extractor Rework Station Hot Motherboard Circuit Board Component Puller Tweezer Tool for Welding Solder Soldering Iron

wishlist
Compare

Lattice USB download line FPGA CPLD ISP download simulation HWUSBN2A

Lattice USB download line FPGA CPLD ISP download simulation HW-USBN-2A

Login to Download: Download software

Features:

1. Using Lattice original design, to ensure the use of stable and reliable;

2. Support wide target voltage 1.2V- 5V;

3.USB power supply, no external power supply alone;

4. Supports all LATTICE development environments (LSC ISPVM, LATTICE DEMIOND, LATTICE ISPEVER, and LATTICE PROGRAMMER);

Supports a full range of Lattice FPGAs such as SC (M) / XP / XP2 / ECP2 (M) / ECP3 / ECP5 (G) / MachXO / MachXO2 / MachXO3 / ICE40 series;

6. Support Lattice full range of CPLDs, such as 1000/2000/4000 / ispMACH series;

7. Support JTAG, internal FLASH, SPI FLASH programming mode;

8. No need to install a separate driver, direct support for Diamond / ispLever6.x / 7.x / classic / ispVM various versions of drivers;

9. Has a current-limit input, ESD protection measures to ensure that the download line is complete;

10. Using Lattice official 2 * 5Pin pitch 2.54mm JTAG interface;

11. Support operating system Win2000 / XP, Windows7 / 8/10, Linux and so on

Download Wire Pin Description:

1.SCLK / TCK: connect with chip's SCLK / TCK pin;

2.GND: Downloader and the target board of the public, its internal 2,4-pin connection, in use, need to be a 2,4 feet connected to the target board;

3.MODE / TMS: with the chip's MODE / TMS pin connection;

4.GND: Downloader and the target board of the public, the internal 2,4-pin connection, in the need to use these two in a 2,4 feet connected to the target board;

5. SDI / TDI: SDI / TDI pin connection with the chip;

6.VCC: Used to detect whether the target board connected to the downloader is powered on or not used to power the target board. The official downloader does not have the ability to supply power to the target board. This needs attention;

7.SDO / TDO: SDO / TDO pin connection with the chip;

8.INTI: need to connect INTI pins when downloading and debugging some chips, not every chip needs to be connected;

9.TRST: In some chip download debugging need to connect TRST pin, not every chip needs to connect;

10.ispEN / Enable / PROG: It is necessary to connect the ispEN / Enable / PROG pins when downloading and debugging some chips, and not every chip needs to be connected.

Shipping list:

1.Lattice USB download cable (1)

2.USB 2.0 data cable (1)

3.10P 2.54MM spacing of the cable (1)

4.10P high-quality lattice special fly line (1)

5.2.54mm pitch 2X5 turn 8P standard definition line (1)

CH001589
€21.01

Lattice USB download line FPGA CPLD ISP download simulation HW-USBN-2A

wishlist
Compare

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel

Gauge Evaluator

Login to Download: * EV2300a Device Driver Installer Multilanguage

Model No: EV2300 HPA002

Included:

1 x Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

Description:

The EV2300 is a USB-based interface board for a PC that can be used to evaluate battery fuel gauge circuits designed with Texas Instruments' ICs. The EV2300 has connections on it for a USB cable and also accepts inputs from a battery fuel gauge circuit's communication port (SMBus or HDQ). By running the appropriate PC software for the correspondingfuel gauge IC, the EV2300 interface board allows the user to evaluate the battery fuel gauge circuit. Note: The driver on this page is for 32 bit Windows. See the 64 bit driver e2e post for 64 bit Windows 7 driver information.

Feature:

USB-based interface board for evaluation of battery fuel gauge circuits developed with fuel gauge ICs using the HDQ and SMBus communication protocol

Provides interface between intelligent battery circuit and a Windows-based PC

Connects to the USB port of a PC

Allows for on screen display and programming of gas gauge register functions when used with the appropriate PC software

CH001659
€128.05

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

wishlist
Compare
Back to top