GX2032 Adapter for XELTEK SuperPro 7500

QK0813B

Default configuration:

10.5*13.5mm

KWS-1902C USB Multifunction Tester

Login to Download: * User Manual Items List

Features:

? 48 Pin ZIF socket with Popular pin-drivers.

? Interface with LAPTOP, PC or compatibles through USB port

? Accepts standard file formats: JEDEC, INTEL (Extended) HEX, HOLTEK, EMC(.CDS), INTEL HEX16, Motorola S record

? Manages 16 and 32-bit word split (Set Programming)

? Features Test Vector capability and multiarray fuse map editor

? Test TTL/CMOS logic ICs and Dynamic/Static Random Access Memory devices

? Optimum programming for each individual device

? Automaticly Identifies the manufacturer and type of E(E)PROMs, Auto identifies TTL/CMOS logic IC

? Device insertion and poor-pin-contact check

? Support 1.5v Low voltage devices

? Not need exterior adapter for mostly devices.

? Universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP adapters

? Auto-run mode starts programming automatically upon detection of chip insertion

? Supports WindowsXP/Vista/ Windows 7 (32bit and 64bit)/ Windows 8 (32bit and 64bit)

? Supports ten languages, such as Chinese(Simplified), Chinese(Traditional), English, Korean, Poland, Italian, Portuguese, Dutch, Turkish and Hungary.

Specification:

? Dimension: 1689823mm

? weight: 265g

? Electrical spec. of the AC adapter: AC input 100V to 240V, 50/60Hz, DC output 9V/0.6A

Device Support:

? PROM: N/CMOS E(E)PROM, SeriesE(E)PROM, and FLASH Memory

? PLD: CPLD, EPLD, GAL, PEEL, PALCE and more

? Microcontroller: Atmel, Intel, Microchip, Signetics, Zilog, etc.

IC Test:

? TTL (74 series), CMOS (40/45 series) Logic IC

? DRAM SRAM memory device

Package Including:

1pc x Wellon Programmer VP-598

1pc x USB cable

1pc x VP-598 Manual

1pc x power adapter

The oscilloscope can put the invisible power to the naked eye the electrical signals into visible image, convenient for people to study the changing process of various electrical phenomena. The item with ultrathin and compact design for portable use.

Features:

2-channel digital storage oscilloscope, 100MHz bandwidth.

1GSa/s sampling rate for single channel, 500MSa/s sampling rate for dual channel.

7" TFT color screen for clear and stable waveform display.

Storage/ Memory depth: single channel: 40Kpts; double channels: 20Kpts.

Various trigger functions: Edge, Pulse, Video, Slope and Alternation.

32 kinds of automatic measurement and manual cursor tracking measurement functions.

Two groups of reference waveforms, 16 groups of common waveforms, 20 groups of internal storage/output; support waveform setting, external storage and output of CSV and bitmap file by USB flash disc (CSV and bitmaps cannot be output from USB flash disc).

Shortcut key to PRINT, support print screen.

Standard configuration interfaces: USB Host, USB Device, RS-232.

Can be widely used in industrial power and electronics design, troubleshooting, installation, maintenance, production test and quality inspection, etc.

Specifications:

Input

Input coupling AC, DC, GND

Input impedance 1MO 3% || 16pF 3pF

Maximum input voltage 400V (DC+AC peak value, 1MO input impedance)

Probe attenuation 1X, 10X

Signal acquisition system

Sampling mode Real-time sampling

Sampling rate Single channel 1GSa/s, dual channel 500MSa/s

Storage depth

Single channel 40kpts; Dual channel 20kpts

Acquire mode Sampling, peak value detection, average value

Average time 4, 16, 32, 64, 128, 256

Vertical system

Vertical sensitivity 2mV/div - 5V/div (1-2-5 step-by-step)

Channel voltage offset range 10div offset from the screen center

Vertical resolution 8bit

Channel amount 2

Bandwidth 100MHz

AC plus accuracy 2mV/div =4%, the rest gears =3%

DC measurement accuracy [DC measurement accuracy x reading+ (1% x vertical displacement reading) +0.2div]

Rise time

< 3.5ns

Vertical coupling AC,DC,GND

Arithmetical operation +, -, , , FFT

FFT

Window mode: Hanning, Hamming, Blackman; Sampling points : 1024

Bandwidth limit 20MHz (-3dB)

Horizontal system

Time base 2ns/div ~ 50s/div, step 32 gears according to sequence 1-2-5

Horizontal displacement range 100div

Display mode Y-T mode, X-Y mode

X-Y mode phase difference 3 Degrees

Display type Point display, vector display

Trigger system

Trigger type Edge, pulse, video, slope, alternation

Trigger signal source CH1, CH2, EXT, EXT/5, AC Line

Trigger mode Auto, normal, single

Trigger coupling DC, AC, Low-frequency rejection, high-frequency rejection

Trigger electric level range CH1, CH2:10div

EXT: 1.5V

EXT/5: 7.5V

Trigger sensitivity CH1, CH2: =1div

EXT: =0.15V

EXT/5: =0.75V

Hold-off range 100ns ~10s

Edge trigger Type: rise, descend, rise and descend edge

Pulse width trigger Type: (>, <, =) positive pulse width

(>, <, =) negative pulse width

Pulse width: 20ns ~ 10s

Pulse width resolution: 5ns or 1? (take the higher value)

Video trigger Support signal system: PAL, NTSC

Trigger condition: odd field, even field, all rows, specified row

Slope trigger (>, <, =) positive slope

(>, <, =) negative slope

Time setup: 20ns-10s

Alternating trigger CH1 trigger type: edge, pulse, video, slope

CH2 trigger type: edge, pulse, video, slope

Measurement system

Automatic measurement (32 kinds) Maximal valve, minimal value, peak-to-peak value, amplitude, top value, bottom value, periodic average value, average value, periodic mean square root, mean square root, rise extreme, descend extreme, rise time, descend time, frequency, period, pulse width, positive pulse width, negative pulse width, positive duty ratio, negative duty ratio, phase, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF

Cursor measurement Manual measurement mode, cursor tracking measurement mode

Control panel Function

Auto setup The auto setup function can realize automatic regulation of the vertical system, the horizontal system and the trigger position.

Save/recall 2 groups of reference waveform, 16 groups of common waveform, 16 groups of setups; save and recall from USB flash drive of the waveform, setups, CSV and bitmap files (CSV and the bitmaps cannot be recalled from the USB flash disc) are supported.

Hardware frequency counter

Reading resolution ratio 6 bits

Range Alternating-current coupling, from 10Hz to the maximal bandwidth

Signal source All sources capable of being triggered in pulse trigger or edge trigger type

Display system

Display type TFT 7-inch (178mm) LCD

Display resolution ratio 800 (horizontal) pixels x 480 (vertical) pixels

Display color 64k color

Contrast ratio (typical) 500:1

Background intensity (typical) 300 Cd/m2

Waveform display range 14 8 grids

Afterglow Off, 1 second, 2 seconds, 5 seconds, infinite

Menu display 2 seconds, 5 seconds, 10 seconds, 20 seconds, infinite

Screen saver Off, 1min, 2min, 5min, 10min, 15min, 20min, 1h, 2h, 5h

Interpolation mode Sine interpolation, linear interpolation

Screen color mode Normal, inverse phase

Display language Simplified Chinese, English

Power supply

Power voltage 100-240 VAC, CAT II, auto selection

AC power supply frequency range 45Hz to 440Hz

Consumed power 50VA Max

Environment

Temperature Operating: 10 oC to +40 oC

Non operating: -20 oC to +60 oC

Cooling Forced cooling of fan

Humidity = 90% below 40 oC

Height Operating: smaller than 3000m

Non operating: smaller than 15000m

Plug Type: US / EU(optional)

Power Supply: AC100-240V

Item Size: 33.5 * 13 * 15cm / 13.19 * 5.12 * 5.91in

Item Weight: 2.34kg / 5.16lb

Package Size: 38 * 22 * 26cm / 14.96 * 8.66 * 10.24in

Package Weight: 3.42kg / 7.53lb

Package List:

1 * Digital Storage Oscilloscope

1 * Pair of Oscilloscope Probes

1 * USB Cable

1 * Power Line

1 * Data CD

SA409T-B4002 Adapter TSOP40/D40 for XELTEK SuperPro 610P 611S

Login to Download: * User Manual Download

Product Description

Package includes: 1PCS PLCC20 Socket

PLCC20 Adapter for PLCC20-DIP20

Stock: in stock

Condition: NEW

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

Hantek PP-200 Oscilloscope Probe Accessories with Alligator Clip 1X 10X 200MHz

BeeProg2C Extremely fast universal USB interfaced programmer

Login to Download: * items list Download

Short description:

110304 supported devices from 343 manufacturers by 3.37 version of SW (17. May. 2018)

List of devices supported by

extremely fast programming, one of the fastest programmers in this category.

Sustainable programming speed greater than 5 MBytes per second.

Programs 2 GB eMMC NAND Flash in less than 365 sec.

48-pins powerful pindrivers, no adapter required for any DIL devices

ISP connector for in-circuit programming

connection to PC: USB 2.0 (up to 480 Mbit/s, high speed/full speed) and 1.1 compatible interface

after upgrade to BeeProg2, also high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface is available

comfortable and easy to use control program, works with all versions of MS Windows from Windows XP to Windows 10 (32-bit and 64-bit*)

unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software

Multiprogramming possible by attaching more programmers to one PC

made in Slovakia

warranty - 3 years

approved by CE laboratory to meet CE requirements

Features

GENERAL

? BeeProg2C is USB-compatible, MS Windows (from Windows XP to Windows 10 32-bit and 64-bit) based ELNEC universal programmers, built to meet the strong demand of the small manufacturing and developers community for the fast and reliable universal programmer.

? BeeProg2C programmer have hardware identical with the BeeProg2 programmer, the differences are only in software. BeeProg2C have next limitations against BeeProg2:

o unsupported obsolete bipolar chips (PROMs and PLDs)

o unsupported obsolete EPROMs with programming voltage 21V and above

o unsupported obsolete 2708 EPROMs

o unsupported obsolete microcontrollers MCS48 series

o unsupported obsolete microcontrollers 8751/8752 with programming voltage 21V and above

o unsupported some very obsolete chips and special implementations

o LPT port connection usage is disabled in software

? BeeProg2C programmer can be any time upgraded to BeeProg2 using BeeProg2C to BeeProg2 upgrade kit

? Supports all kinds of types and silicon technologies of today and tomorrow programmable devices without family-specific module. You have freedom to choose the optimal device for your design. Using built-in in-circuit serial programming (ISP) connector, the programmer is able to program ISP capable chips in circuit.

? BeeProg2C isn't only a programmer, but also a tester of TTL/CMOS logic ICs and memories. Furthermore, it allows generation of user-definable test pattern sequences.

? Provides very competitive price coupled with excellent hardware design for reliable programming.

? Extremely fast programming due to high-speed FPGA driven hardware and execution of time-critical routines inside of the programmer. As a result, when used in manually-operated production, this one-socket-programmer in most cases waits for an operator.

? BeeProg2C interfaces with any IBM PC compatible personal computers, running MS Windows OS, through USB (2.0 HigSpeed) port. After upgrade to BeeProg2 can be also used through parallel (printer) port.

HARDWARE

? FPGA based totally reconfigurable 48 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of socket. Advanced pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or ground bounce for all supported devices. Improved pin drivers drivers operate down to 1.8V so you'll be ready to program the full range of today's advanced low-voltage devices.

? The programmer performs device insertion test based on the check of proper signal path between the programmer and programmed device before it programs each device. In dependence on programming configuration it identifies missed or poor contact between programmed device and the ZIF socket of the programming adapter (or the programmer directly), missed or poor contact between the programming adapter and the programmer and it's also able to indicate wrong position of device in the ZIF socket of the programmer / the programming adapter (moved, rotated, backward oriented). These capabilities, supported by overcurrent protection and signature-byte check help prevent chip damage due to operator error.

? The selftest capability allow to run diagnostic part of software to thoroughly check the health of the programmer.

? Built-in protection circuits eliminate damage of programmer and/or programmed device due to environment or operator failure. All the inputs of the BeeProg2C programmer, including the ZIF socket, connection to PC and power supply input, are protected against ESD up to 15kV.

? BeeProg2C programmer performs programming verification at the marginal level of supply voltage, which, obviously, improves programming yield, and guarantees long data retention.

? When programming specification require, the (BeeProg2C) programmer performs programming verification at the marginal levelof supply voltage, which, obviously, improves programming yield, and guarantees long data retention.

? Various programming adapters are available to handle device in PLCC, JLCC, SOIC, SDIP, SOP, PSOP, SSOP, TSOP, TSOPII, TSSOP, QFP, PQFP, TQFP, VQFP, QFN (MLF), SON, BGA, EBGA, FBGA, VFBGA, UBGA, FTBGA, LAP, CSP, SCSP, LQFP, MQFP, HVQFN, QLP, QIP and other packages.

SOFTWARE

? Programmer is driven by an easy-to-use control program with pull-down menu, hot keys and on-line help. Selecting of device is performed by its class, by manufacturer or simply by typing a fragment of vendor name and/or part number.

? Standard device-related commands (read, blank check, program, verify, erase) are boosted by some test functions (insertion test, signature-byte check), and some special functions (autoincrement, production mode - start immediately after insertion of chip into socket).

? All known data formats are supported. Automatic file format detection and conversion during loading of file.

? The rich-featured auto-increment function enables one to assign individual serial numbers to each programmed device - or simply increments a serial number, or the function enables one to read serial numbers or any programmed device identification signatures from a file.

? The software also provide a many information about programmed device. As a special, the drawings of all available packages are provided. The software provide also explanation of chip labelling (the meaning of prefixes and suffixes at the chips) for each supported chip.

? The software provide a full information for ISP implementation: Description of ISP connector pins for currently selected chip, recommended target design around in-circuit programmed chip and other necessary information.

? The remote control feature allows to be PG4UW software flow controlled by other application ? either using .BAT file commands or using DLL file. DLL file, examples (C/PAS/VBASIC/.NET) and manual are part of standard software delivery.

? Jam files of JEDEC standard JESD-71 are interpreted by Jam Player. Jam files are generated by design software which is provided by manufacturer of respective programmable device. Chips are programmed in-ZIF or through ISP connector (IEEE 1149.1 Joint Test Action Group (JTAG) interface).

? VME files are interpreted by VME Player. VME file is a compressed binary variation of SVF file and contains high-level IEEE 1149.1 bus operations. SVF files are interpreted by SVF Player. SVF file (Serial Vector Format) contains high-level IEEE 1149.1 bus operations. SVF files are generated by design software which is provided by manufacturer of respective programmable device. Chips are programmed in-ZIF or through ISP connector (IEEE 1149.1 Joint Test Action Group (JTAG) interface). VME files are generated by design software which is provided by manufacturer of respective programmable device. Chips are programmed in-ZIF or through ISP connector (IEEE 1149.1 Joint Test Action Group (JTAG) interface).

? Multiple devices are possible to program and test via JTAG chain: JTAG chain (ISP-Jam), JTAG chain (ISP-VME), JTAG chain (ISP-SVF) or JTAG chain (ISP-STP).

QK0807B