• Show Sidebar

There are 376 products.

Active filters

  • Categories: Adapter, DC cable
  • Categories: Programmer & Sockets
  • Categories: Programmer socket
  • Availability: In stock
wishlist
Compare
Quickview

Lattice USB download line FPGA CPLD ISP download simulation HWUSBN2A

Lattice USB download line FPGA CPLD ISP download simulation HW-USBN-2A

Login to Download: Download software

Features:

1. Using Lattice original design, to ensure the use of stable and reliable;

2. Support wide target voltage 1.2V- 5V;

3.USB power supply, no external power supply alone;

4. Supports all LATTICE development environments (LSC ISPVM, LATTICE DEMIOND, LATTICE ISPEVER, and LATTICE PROGRAMMER);

Supports a full range of Lattice FPGAs such as SC (M) / XP / XP2 / ECP2 (M) / ECP3 / ECP5 (G) / MachXO / MachXO2 / MachXO3 / ICE40 series;

6. Support Lattice full range of CPLDs, such as 1000/2000/4000 / ispMACH series;

7. Support JTAG, internal FLASH, SPI FLASH programming mode;

8. No need to install a separate driver, direct support for Diamond / ispLever6.x / 7.x / classic / ispVM various versions of drivers;

9. Has a current-limit input, ESD protection measures to ensure that the download line is complete;

10. Using Lattice official 2 * 5Pin pitch 2.54mm JTAG interface;

11. Support operating system Win2000 / XP, Windows7 / 8/10, Linux and so on

Download Wire Pin Description:

1.SCLK / TCK: connect with chip's SCLK / TCK pin;

2.GND: Downloader and the target board of the public, its internal 2,4-pin connection, in use, need to be a 2,4 feet connected to the target board;

3.MODE / TMS: with the chip's MODE / TMS pin connection;

4.GND: Downloader and the target board of the public, the internal 2,4-pin connection, in the need to use these two in a 2,4 feet connected to the target board;

5. SDI / TDI: SDI / TDI pin connection with the chip;

6.VCC: Used to detect whether the target board connected to the downloader is powered on or not used to power the target board. The official downloader does not have the ability to supply power to the target board. This needs attention;

7.SDO / TDO: SDO / TDO pin connection with the chip;

8.INTI: need to connect INTI pins when downloading and debugging some chips, not every chip needs to be connected;

9.TRST: In some chip download debugging need to connect TRST pin, not every chip needs to connect;

10.ispEN / Enable / PROG: It is necessary to connect the ispEN / Enable / PROG pins when downloading and debugging some chips, and not every chip needs to be connected.

Shipping list:

1.Lattice USB download cable (1)

2.USB 2.0 data cable (1)

3.10P 2.54MM spacing of the cable (1)

4.10P high-quality lattice special fly line (1)

5.2.54mm pitch 2X5 turn 8P standard definition line (1)

CH001589
€21.01

Lattice USB download line FPGA CPLD ISP download simulation HW-USBN-2A

wishlist
Compare
Quickview

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel

Gauge Evaluator

Login to Download: * EV2300a Device Driver Installer Multilanguage

Model No: EV2300 HPA002

Included:

1 x Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

Description:

The EV2300 is a USB-based interface board for a PC that can be used to evaluate battery fuel gauge circuits designed with Texas Instruments' ICs. The EV2300 has connections on it for a USB cable and also accepts inputs from a battery fuel gauge circuit's communication port (SMBus or HDQ). By running the appropriate PC software for the correspondingfuel gauge IC, the EV2300 interface board allows the user to evaluate the battery fuel gauge circuit. Note: The driver on this page is for 32 bit Windows. See the 64 bit driver e2e post for 64 bit Windows 7 driver information.

Feature:

USB-based interface board for evaluation of battery fuel gauge circuits developed with fuel gauge ICs using the HDQ and SMBus communication protocol

Provides interface between intelligent battery circuit and a Windows-based PC

Connects to the USB port of a PC

Allows for on screen display and programming of gas gauge register functions when used with the appropriate PC software

CH001659
€128.05

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

wishlist
Compare
Quickview

LA1010 USB Logic Analyzer 100M Max Sample Rate 16 Channel MCUARMFPGA Deb

Description:

LA1010 is a logic analyzer product with high cost performance. It has 16 input channels and the sample rate is up to 100MHz.

Along with the PC software KingstVIS, 16 channels of digital signal could be sampled at the same time, and then they could be

converted to digital waveform and displayed on the PC screen. The signal could be analyzed with many standard protocols,

to get more straightforward communication data. It helps a lot in testing and analyzing digital system(MCU/ARM/FPGA, etc.),

developing and debugging several communication programs, or monitoring and recording some digital signals for a long time.

Software and user manual: http://www.kingst.org/download/?fl=vis.zip

Features:

Portable and lightweight

Max sampling rate: 100M@3channels, 50M@6channels, 32M@9channels, 16M@16channels

Large sampling depth and support compression

The built-in PWM generator

Compatible USB2.0/3.0 interface

Powerful software and easy to use

Support online upgrade automatically

Specifications:

Input channels number: 16

Max sampling rate: 100M

Measurement bandwidth: 20M

Min pulse width can be captured: 20ns

Max sampling depth: 10G/channel

Input voltage range: -50V ~ +50V

Input impedance: 220KO, 12pF

Adjustable threshold voltage: -4V ~ +4V, step: 0.01V

PWM channels number: 2

PWM frequency range: 0.1 ~ 10MHz

PWM frequency adjust step: 10ns

PWM pulse width adjust step: 10ns

PWM output voltage: +3.3V

PWM output impedance: 50O

Standby current: 100mA

Max operating current: 150mA

Dimensions: 95mm * 55mm * 23mm

Supported OS: Windows XP, Vista, Windows 7/8/10(32/64bit)

Supported standard protocols: UART/RS-232/485, I2C, SPI, CAN, DMX512, HDMI CEC, I2S/PCM, JTAG,

LIN, Manchester, Modbus, 1-Wire, UNI/O, SDIO, SMBus, USB1.1, PS/2, NEC InfraRed, Parallel, etc...

Package included:

1 x LA1010 Host

2 x 9P Flat Cable

1 x 2P Flat Cable

20 x Test Hook

1 x USB Cable

1 x CD

CH001706
€78.32

LA1010 USB Logic Analyzer 100M Max Sample Rate 16 Channel MCU/ARM/FPGA Deb

wishlist
Compare
Quickview

QFN32 55 0.5 Adapters MLP32 chip test Adapters to DIP Programmer

Product use:

The universal programming block and universal test stand are used to write and test the IC chip of QFN32

Applicable package:

MLF32/QFN32, pin spacing 0.5mm; support chip at the bottom of the package with pin function

Test Adapters:

QFN-32 (40) BT-0.5-02

Characteristic:

Draw all PIN from both sides; compatible with 2.54mm universal board; use special long head to support wire or insert user board; test seat belt center pin

Product description:

Pin spacing e (mm): 0.5

Pin: 32

D*E(mm): 5*5

A(mm): 1

CH001718
€68.00

QFN32 (5*5) -0.5 Adapters MLP32 chip test Adapters to DIP Programmer

AK90 Key Programmer Adapter and 10Pin Cable Set

New For AK90+ Key Programmer Adapter and 10Pin Cable Set

Works together with For AK90+ key programmer.

Package List:

1pc x For AK90+ 10 Pin Cable

1pc x For AK90+ Chip data to read specific seat

CH001495
€22.25

AK90+ Key Programmer Adapter and 10Pin Cable Set

wishlist
Compare

Lattice USB download line FPGA CPLD ISP download simulation HWUSBN2A

Lattice USB download line FPGA CPLD ISP download simulation HW-USBN-2A

Login to Download: Download software

Features:

1. Using Lattice original design, to ensure the use of stable and reliable;

2. Support wide target voltage 1.2V- 5V;

3.USB power supply, no external power supply alone;

4. Supports all LATTICE development environments (LSC ISPVM, LATTICE DEMIOND, LATTICE ISPEVER, and LATTICE PROGRAMMER);

Supports a full range of Lattice FPGAs such as SC (M) / XP / XP2 / ECP2 (M) / ECP3 / ECP5 (G) / MachXO / MachXO2 / MachXO3 / ICE40 series;

6. Support Lattice full range of CPLDs, such as 1000/2000/4000 / ispMACH series;

7. Support JTAG, internal FLASH, SPI FLASH programming mode;

8. No need to install a separate driver, direct support for Diamond / ispLever6.x / 7.x / classic / ispVM various versions of drivers;

9. Has a current-limit input, ESD protection measures to ensure that the download line is complete;

10. Using Lattice official 2 * 5Pin pitch 2.54mm JTAG interface;

11. Support operating system Win2000 / XP, Windows7 / 8/10, Linux and so on

Download Wire Pin Description:

1.SCLK / TCK: connect with chip's SCLK / TCK pin;

2.GND: Downloader and the target board of the public, its internal 2,4-pin connection, in use, need to be a 2,4 feet connected to the target board;

3.MODE / TMS: with the chip's MODE / TMS pin connection;

4.GND: Downloader and the target board of the public, the internal 2,4-pin connection, in the need to use these two in a 2,4 feet connected to the target board;

5. SDI / TDI: SDI / TDI pin connection with the chip;

6.VCC: Used to detect whether the target board connected to the downloader is powered on or not used to power the target board. The official downloader does not have the ability to supply power to the target board. This needs attention;

7.SDO / TDO: SDO / TDO pin connection with the chip;

8.INTI: need to connect INTI pins when downloading and debugging some chips, not every chip needs to be connected;

9.TRST: In some chip download debugging need to connect TRST pin, not every chip needs to connect;

10.ispEN / Enable / PROG: It is necessary to connect the ispEN / Enable / PROG pins when downloading and debugging some chips, and not every chip needs to be connected.

Shipping list:

1.Lattice USB download cable (1)

2.USB 2.0 data cable (1)

3.10P 2.54MM spacing of the cable (1)

4.10P high-quality lattice special fly line (1)

5.2.54mm pitch 2X5 turn 8P standard definition line (1)

CH001589
€21.01

Lattice USB download line FPGA CPLD ISP download simulation HW-USBN-2A

wishlist
Compare

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel

Gauge Evaluator

Login to Download: * EV2300a Device Driver Installer Multilanguage

Model No: EV2300 HPA002

Included:

1 x Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

Description:

The EV2300 is a USB-based interface board for a PC that can be used to evaluate battery fuel gauge circuits designed with Texas Instruments' ICs. The EV2300 has connections on it for a USB cable and also accepts inputs from a battery fuel gauge circuit's communication port (SMBus or HDQ). By running the appropriate PC software for the correspondingfuel gauge IC, the EV2300 interface board allows the user to evaluate the battery fuel gauge circuit. Note: The driver on this page is for 32 bit Windows. See the 64 bit driver e2e post for 64 bit Windows 7 driver information.

Feature:

USB-based interface board for evaluation of battery fuel gauge circuits developed with fuel gauge ICs using the HDQ and SMBus communication protocol

Provides interface between intelligent battery circuit and a Windows-based PC

Connects to the USB port of a PC

Allows for on screen display and programming of gas gauge register functions when used with the appropriate PC software

CH001659
€128.05

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

wishlist
Compare

LA1010 USB Logic Analyzer 100M Max Sample Rate 16 Channel MCUARMFPGA Deb

Description:

LA1010 is a logic analyzer product with high cost performance. It has 16 input channels and the sample rate is up to 100MHz.

Along with the PC software KingstVIS, 16 channels of digital signal could be sampled at the same time, and then they could be

converted to digital waveform and displayed on the PC screen. The signal could be analyzed with many standard protocols,

to get more straightforward communication data. It helps a lot in testing and analyzing digital system(MCU/ARM/FPGA, etc.),

developing and debugging several communication programs, or monitoring and recording some digital signals for a long time.

Software and user manual: http://www.kingst.org/download/?fl=vis.zip

Features:

Portable and lightweight

Max sampling rate: 100M@3channels, 50M@6channels, 32M@9channels, 16M@16channels

Large sampling depth and support compression

The built-in PWM generator

Compatible USB2.0/3.0 interface

Powerful software and easy to use

Support online upgrade automatically

Specifications:

Input channels number: 16

Max sampling rate: 100M

Measurement bandwidth: 20M

Min pulse width can be captured: 20ns

Max sampling depth: 10G/channel

Input voltage range: -50V ~ +50V

Input impedance: 220KO, 12pF

Adjustable threshold voltage: -4V ~ +4V, step: 0.01V

PWM channels number: 2

PWM frequency range: 0.1 ~ 10MHz

PWM frequency adjust step: 10ns

PWM pulse width adjust step: 10ns

PWM output voltage: +3.3V

PWM output impedance: 50O

Standby current: 100mA

Max operating current: 150mA

Dimensions: 95mm * 55mm * 23mm

Supported OS: Windows XP, Vista, Windows 7/8/10(32/64bit)

Supported standard protocols: UART/RS-232/485, I2C, SPI, CAN, DMX512, HDMI CEC, I2S/PCM, JTAG,

LIN, Manchester, Modbus, 1-Wire, UNI/O, SDIO, SMBus, USB1.1, PS/2, NEC InfraRed, Parallel, etc...

Package included:

1 x LA1010 Host

2 x 9P Flat Cable

1 x 2P Flat Cable

20 x Test Hook

1 x USB Cable

1 x CD

CH001706
€78.32

LA1010 USB Logic Analyzer 100M Max Sample Rate 16 Channel MCU/ARM/FPGA Deb

wishlist
Compare

QFN32 55 0.5 Adapters MLP32 chip test Adapters to DIP Programmer

Product use:

The universal programming block and universal test stand are used to write and test the IC chip of QFN32

Applicable package:

MLF32/QFN32, pin spacing 0.5mm; support chip at the bottom of the package with pin function

Test Adapters:

QFN-32 (40) BT-0.5-02

Characteristic:

Draw all PIN from both sides; compatible with 2.54mm universal board; use special long head to support wire or insert user board; test seat belt center pin

Product description:

Pin spacing e (mm): 0.5

Pin: 32

D*E(mm): 5*5

A(mm): 1

CH001718
€68.00

QFN32 (5*5) -0.5 Adapters MLP32 chip test Adapters to DIP Programmer

wishlist
Compare
Back to top