SSD Enclosure for 2013 to 2017 MacBook Air Pro Retina,USB 3.0 SSD Adapter with case

Description :

This product is 2013-2014-2015 MACBOOK AIR/PRO Retina ssd SSD to USB adapter, it is allowed to use SSD from 2013 2014 2015 2016 2017 Macbook SSD module through USB3.0 port on your desktop or laptop.

Features :

? Fit SSD modules only from the following Apple 2013 MACBOOK AIr PRO:

11" Air Mid 2013, A1465(MD711.MD712)

13" Air Mid 2013, A1466 (MD760.MD761)

13" PRO Retina Late 2013, A1502 (ME864, ME865, ME866)

15" PRO Retina Late 2013, A1398 (ME293, ME294, ME874)

? Fit following SSD modules:

Samsung MZ-JPU128T/0A2, MZ-JPU256T/0A2,MZ-JPU512T/0A2,MZ-KPU1T0T/0A2 Sandisk SD6PQ4M-128G

? Support Hi-Speed USB 3.0(5Gbps), PCIe Gen2 5Gb/s mass storage interface

? Extra power needed if USB3.0 port can't provide enough power supply

Note :

1. Support Sandisk SD6PQ4M-128G, SD6PQ4M-256G SSD; Support Samsung MZ-JPU128T, MZ-JPU256T, MZ-JPU512T, MZ-KPU1TOT, MZ-JPV1280.

2. DO NOT support Toshiba THNSN2128GSPS, Samsung MZ-JPV2560/5120, MZ-KPV1TOT

3. Before you buy this item,pls check if your SSD is 2013-2016 version with 12+16pin gold-pins.

Package included :

? 1x USB 3.0 to 2013 2014 2015 2016 2017 SSD Adapter Case Enclosure

? 1x USB 3.0 to mini usb cable

? 1x screwdriver

Buy Tweezers Set: * IC Chip Extractor Rework Tweezer Tool

Description

Model QUICK861DW

Type of soldering station

Temperature adjustment range 100 ~ 500 (?)

Scope of application Electronic products Welding input voltage 220 (V)

Output voltage 26 (V)

Fuse has

Resistance to ground resistance less than 2 (O)

Shell surface impedance less than 2 (O)

Welding Tsui to ground voltage less than 5 (mV)

Power 1000 (W)

Dimensions 188L * 245D * 135H (mm)

Heating time 1min

Net Weight 3.65 (kg)

Set QUICK861DW

Maximum air volume 120L / min

Whether the spot is

Air volume range of 1 ~ 120 level

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

30W (100-230V) Soldering Iron T-Tip (head) and Teflon rubber for Pixel Ribbon cable Repair

The 30W Electronic Soldering Iron comes with a T-Tip head and Rubber Cable used for repairing and replacing car LCD flat ribbon cables.

Work Voltage: 100-230V

Application:

For BMW dashboard and mid radio ribbon , for Mercedes Benz instrument cluster ribbon , SAAB ( automatic climate control, SID1, SID2), Opel ribbon.etc.

Pacakge:

1P x T-tip (head)

1P x Rubber

Note: Different size for soldering iron Tip, so the power of the tip must the same with your electronic soldering iron power.

2012 A1465 MagSafe DC I/O Power Board USB Port Audio Jack For MacBook Air 11

Model Number: 820-3213-A

Please know this fit A1465 2012 year only

LEAD-FREE TITANIUM ALLOY SOLDERING POT

Operation instruction

Login to Download: * Manual Download

Our Lead-free titanium alloy soldering pot passed by SGS, built-in advanced microcomputer digital control and display system, make it more safe, more steady and more accurate. Its a good tool for electronic fields.

FEATURES:

* With big power heater, only within 25minutes to reach 450? from room temperature, (Different items with a little different heating time.)

* With advanced microcomputer digital control and double displays. make it more accurate heating and fast temperature returning capability.

* The boiler made of titanium alloy, can resist high temperature, cauterization and abrasion, largely prolong the life.

* With temperature setting and locking function, will not be affected by wrong operation.

* The setting value will be saved for long time, and can not be affected by power on or off. With auto sleeping function, prolong the machines life.

* With malfunction alarm.

Working conditions:

Working voltage: AC22010V

Working temperature: 0-55?

Working temperature: < 90% no dew

WARNING:

1. The soldering pot must be put on the balanced and ovenproof working desk, prevent the glowing tin go out of the pot. And also take care of the hot tin and the hot body.

2. Do not put other pb items together with the lead-free soldering pot, prevent pb pollution. If cause the products do not eligible, then we wont take on this liability.

3. It cant be used where it will be exposed to ignitable or corrosive materials and gases.

4. If you need to move the soldering pot, please turn off the switch and move it after the pot turn cool.

5. The pot is a hot equipment, if you no need to use, please shut off the switch, and put out the plug.

6. In order to keep it safe and prolong the life, its better stop working after it has worked more than 12hours.

7. Do not heating the pot when its empty, and use the power supplier with grounding cord.

8. The pot is made of titanium which import from Japan, after it is heated by hot temperature, the color will turn to golden or blue, its natural for the material.

OPERATION:

1. Set temperature:

Press the * button, the left LED will display ?,and the right LED will display numerical value, then press the + or -button, temperature will go up or down. Press * button, the value of temperature will be saved.

2. Microcomputer adjusting itself

If the temperature has obvious discrepancy, we can adjust the inside P, I, D value, it will make the pot with accurate control, the followings are two ways of P, I, D adjusting:

A. Auto adjusting

Keep pressing + button, then press * , the left LED will display AT; the right LED will display _ _ _. Then press ? or + change the _ _ _ to AT, this time please press * for 3 times, then the pot will begin P, I, D adjusting itself. Usually it will take for about 15-30 minutes to finish this adjusting, during this adjusting the temperature will fluctuate obviously, but its no wonder. Usually, we do not recommend the users use P, I, D adjusting.

B. Adjust the value of P, I, D by manual (Do not advise users use this way, its fit for the engineers who know P, I, D very well, otherwise maybe cause bad temperature control. If really need, we just recommend the first way.) The operation as follows: Keep pressing + , then press * , the LED will display above (A) setting mode, press * again the LED will display the value of P, I, D. Manual adjusting just can be set the original value.

Remarks: The original of P, I, D value is: P=20, I=80, D=20; If the temperature in

confusion, please set the P, I, D value as original value.

3. Calibration between display and real temperature.

After the heater was replaced or the sensor was oxidated, the temperature will occur warp, the users need to calibrate the pot termly, and as the follow steps:

A. Press CAL button (If your pot without this button, please open the front cover, there is a black button on the PCB of temperature control, that is CAL), the right LED will display OFF, keep pressing ? , and press * at the same time, the left LED will display LOC, the right LED will display -3-, then press * for 3 times (just this button, do not press any other buttons), the LED will display: The first time: Left ?H, right 999; The second time: Left ?L, right 0; The third time: Left ?L, then please input the value of temperature compensation. This value is the warp between display temperature and real temperature. For example, the real temperature is more 5? higher than the display temperature, it can use ? to set -5; If the real temperature is 5? less than the display temperature, it can use + to set 5.

B. The warp temperature is the value to input, after finish setting, press * again, the set value will be saved. Then press CAL (If your pot without this button, please open the front cover, there is a black button on the PCB of temperature control, that is CAL), it will come into the ordinary display mode.

TROUBLE SHOOTING:

1. Turn on the switch but no reflection, please check the fuse, and the plug.

2. The LED display setting temperature, but the pot temperature wont go up, it means that the heater is open circuit.

3. The pot display Err when the power switch is turned on, it means that the sensor is open circuit.

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

Sale High speed PCI-e 1X/4x Card to NGFF M.2 M Key LM-141X-V1.0 PCIe Slot Adapter

High speed PCI-e 1X/4x Card to NGFF M.2 M Key LM-141X-V1.0 PCIe Slot Adapter

Description:

PCI-e X4 to M.2 NGFF Adapter

M.2 Specification Revision 0.9-3

Serial ATA Spec. Reversion 3.2

Support 2260/2280 type M.2 SSD module slot

Only Supports an M.2 Socket 3 PCI-e-based slot

Micro SATA Cables PN # M2-PCIE-1X4X

Quantity:1 Set

Features:

PCI Express PCI-E 4X Female to NGFF M.2 M Key Male Adapter Converter Card with Power Cable Allows users to use standard

PCI-e 1x/4x card in an M.2 NGFF M key slot in the Desktop or Laptop. Transparent to the operating system and does not require any software drivers

Supports data transfer up to 4.0GB/s. Supports socket 3 (M Key). One PCI-E 4X female socket and one NGFF M.2 Key M male connector available

Floppy 4 pin power connector available for stable power. 2 screw holes 2260/2280 available. Easy installation & no driver required. Supports any OS, like Windows, WinCE & Linux etc.

Function:

Allows users to use standard PCI-e 4x card in an M.2 NGFF M key slot in the Desktop or Laptop

Transparent to the operating system and does not require any software drivers

Package Included:

1 x PCI-E 4X to NGFF M.2 B+M Key Adapter Card

1 x Floppy 4 Pin to Molex Power Cable

1 x Screw

SP 78 Keys Wireless Keyboard Bluetooth Ultra Slim for iPad/Windows OS/Mac/Android

OMEGA thermocouple line

Model: temperature range: -200? ~260? (PTFE material) -200-500? (glass fiber material)

Wire diameter: 2*F0.127mm 2*0.255MM

Core material: nickel chromium / nickel silicon (K) copper / constantan (T) iron / copper nickel (J)

Color mark: red is negative / yellow is positive

The thermocouple temperature line for any K type imported and domestic use temperature recording instrument, used in the laboratory, aerospace engineering, shipbuilding, petrochemical, machinery fittings (reflow) etc.

Description:

Input: AC 100-240V, 50-60Hz

Output: 14.85V 3.05A

Power: 45W

Connecter size: Magsafe "T "TIP 5 PIN

Condition: Brand New Replacement AC Adapter

Note: Brand New Replacement Product, works as genuine parts, 100% Compatible!!

Compatible Part Number:

A1435, A1465, A1436, A1466, MD223, MD224, MD231, MD232,MD592

Compatible Models:

MacBookAir5,1 Mid 2012: MD223LL/A (1.7 GHz Core i5)

MacBookAir5,1 Mid 2012: MD224LL/A (1.7 GHz Core i5)

MacBookAir5,1 Mid 2012: MD224LL/A (2.0 GHz Core i7)

MacBookAir6,1 Mid 2013: MD711LL/A (1.3 GHz Core i5)

MacBookAir6,1 Mid 2013: MD712LL/A (1.3 GHz Core i5)

MacBookAir6,1 Mid 2013: MD712LL/A (1.7 GHz Core i7)

MacBookAir6,1 Early 2014: MD711LL/B (1.4 GHz Core i5)

MacBookAir6,1 Early 2014: MD712LL/B (1.4 GHz Core i5)

MacBookAir6,1 Early 2014: MD712LL/B (1.7 GHz Core i7)

MacBookAir7,1 Early 2015: MJVM2LL/A (1.6 GHz Core i5 or 2.2 GHz Core i7)

MacBookAir7,1 Early 2015: MJVP2LL/A (1.6 GHz Core i5 or 2.2 GHz Core i7)

MacBook Air 13" A1466

MacBookAir5,2 Mid 2012: MD231LL/A (1.8 GHz Core i5)

MacBookAir5,2 Mid 2012: MD231LL/A (1.8 GHz Core i5)

MacBookAir5,2 Mid 2012: MD232LL/A (1.8 GHz Core i5)

MacBookAir5,2 Mid 2012: MD232LL/A (2.0 GHz Core i7)

MacBookAir6,2 Mid 2013: MD760LL/A (1.3 GHz Core i5)

MacBookAir6,2 Mid 2013: MD761LL/A (1.3 GHz Core i5)

MacBookAir6,2 Mid 2013: MD761LL/A (1.7 GHz Core i7)

MacBookAir6,2 Mid 2014: MD760LL/B (1.4 GHz Core i5)

MacBookAir6,2 Mid 2014: MD761LL/B (1.4 GHz Core i5)

MacBookAir6,2 Mid 2014: MD761LL/B (1.7 GHz Core i7)

MacBookAir7,2 Early 2015: MJVE2LL/A (1.6 GHz Core i5 or 2.2 GHz Core i7)

MacBookAir7,2 Early 2015: MJVG2LL/A (1.6 GHz Core i5 or 2.2 GHz Core i7)

MacBook Air MD592LL/A (Newest Version)

MacBook Air (11-inch, Early 2015)

MacBook Air (13-inch, Early 2015)

MacBook Air (11-inch, Early 2014)

MacBook Air (13-inch, Early 2014)

MacBook Air (11-inch, Mid 2013)

MacBook Air (13-inch, Mid 2013)

MacBook Air (11-inch, Mid 2012)

MacBook Air (13-inch, Mid 2012)

USB Wireless Optical Mouse Keyboard Set