• Show Sidebar

There are 2327 products.

Active filters

  • Categories: Car Service Equipment
  • Categories: Laptop Parts, Repair tool
  • Categories: Other BGA Chips & ICs
wishlist
Compare
Quickview

UNO R3 Kit with Motor LCD Servo Module for Arduino AVR Starter

Package includes:

1pcs UNO R3

1pcs USB cable

1pack jumper wires

1pcs 830 Point BREADBOARD

15pcs led (Red, Green, Yellow)

30pcs resistance(220R, 10K, 1K)

1pcs 10 pin dupont line(male to female)

1pcs potentiometer

1pcs active buzzer

1pcs passive buzzer

1pcs 74HC595N

1pcs Infrared receiving head

1pcs LM35DZ

1pcs Flame sensor

2pcs Roll Ball Switch

3pcs 5mm LDR

5pcs Button Switch with Cap

1pcs IR remote control

1pcs one digital tube

1pcs four digital tube

1pcs 8*8 dot matrix tube

1pcs UNL2003 driver board

1pcs 5V stepper motor

1pcs SG90

1pcs LCD16021pcs PS2 game joystick module

1pcs DHT11 Temperature and Humidity sensor module

1pcs Water level measurement module

1pcs RFID module

1pcs RFID key ring

1pcs RFID card

1pcs sound sensor module

1pcs one road relay module

1pcs RTC module

1pcs 16 buttons matrix keyboard module

1pcs RGB three color module

1pcs 9V Battery Connector

CH000636
€35.93

UNO R3 Kit with Motor LCD Servo Module for Arduino AVR Starter

wishlist
Compare
Quickview

ENE KB9016QF A3

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000485
€3.97

ENE KB9016QF A3

wishlist
Compare
Quickview

AntiStatic Wristband Wrist Strap Band ESD Discharge PC Electricity Grounding

Product Description

1. Weight: 33g

2. Cable Length: 250cm

3. Simply wrap strap around wrist and clip to a grounded source

4. Prevent Static shock in dry environment

5. Keep static from damaging electronic parts and equipments

6. Adjustable wrist strap with alligator clip tip

7. Inner conducting layer made of stainless shell filaments

8. Durable Polyurethane Coated Coil Cords.

9. High Quality Strain relief.

10. Soft elastic band for comfort.

11. Current limiting resistor 1M ohm 5%

12. Electro-scattering time 0.1sec

13. Rinsing Resisting

CH000641
€2.70

Anti-Static Wristband Wrist Strap Band ESD Discharge PC Electricity Grounding

wishlist
Compare
Quickview

Realtek RTL8110SBL

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000489
€3.45

Realtek RTL8110SBL

wishlist
Compare
Quickview

ATHEROS AR8131AL

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000490
€3.45

ATHEROS AR8131-AL

wishlist
Compare
Quickview

2.0m OMEGA KTYPE Thermocouple TTK30SLE

OMEGA thermocouple line

Model: temperature range: -200? ~260? (PTFE material) -200-500? (glass fiber material)

Wire diameter: 2*F0.127mm 2*0.255MM

Core material: nickel chromium / nickel silicon (K) copper / constantan (T) iron / copper nickel (J)

Color mark: red is negative / yellow is positive

The thermocouple temperature line for any K type imported and domestic use temperature recording instrument, used in the laboratory, aerospace engineering, shipbuilding, petrochemical, machinery fittings (reflow) etc.

CH000647
€6.84

2.0m OMEGA K-TYPE Thermocouple TT-K-30-SLE

wishlist
Compare
Quickview

Maxim MAX17030

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000493
€3.45

Maxim MAX17030

wishlist
Compare
Quickview

Intersil ISL6529CB

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000496
€3.45

Intersil ISL6529CB

wishlist
Compare
Quickview

HYNIX H5GQ1H24AFR T2C

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000502
€4.77

HYNIX H5GQ1H24AFR T2C

wishlist
Compare
Quickview

TC90428XBG2 TOSHIBA CHIPS

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000504
€15.09

TC90428XBG-2 TOSHIBA CHIPS

UNO R3 Kit with Motor LCD Servo Module for Arduino AVR Starter

Package includes:

1pcs UNO R3

1pcs USB cable

1pack jumper wires

1pcs 830 Point BREADBOARD

15pcs led (Red, Green, Yellow)

30pcs resistance(220R, 10K, 1K)

1pcs 10 pin dupont line(male to female)

1pcs potentiometer

1pcs active buzzer

1pcs passive buzzer

1pcs 74HC595N

1pcs Infrared receiving head

1pcs LM35DZ

1pcs Flame sensor

2pcs Roll Ball Switch

3pcs 5mm LDR

5pcs Button Switch with Cap

1pcs IR remote control

1pcs one digital tube

1pcs four digital tube

1pcs 8*8 dot matrix tube

1pcs UNL2003 driver board

1pcs 5V stepper motor

1pcs SG90

1pcs LCD16021pcs PS2 game joystick module

1pcs DHT11 Temperature and Humidity sensor module

1pcs Water level measurement module

1pcs RFID module

1pcs RFID key ring

1pcs RFID card

1pcs sound sensor module

1pcs one road relay module

1pcs RTC module

1pcs 16 buttons matrix keyboard module

1pcs RGB three color module

1pcs 9V Battery Connector

CH000636
€35.93

UNO R3 Kit with Motor LCD Servo Module for Arduino AVR Starter

wishlist
Compare

ENE KB9016QF A3

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000485
€3.97

ENE KB9016QF A3

wishlist
Compare

AntiStatic Wristband Wrist Strap Band ESD Discharge PC Electricity Grounding

Product Description

1. Weight: 33g

2. Cable Length: 250cm

3. Simply wrap strap around wrist and clip to a grounded source

4. Prevent Static shock in dry environment

5. Keep static from damaging electronic parts and equipments

6. Adjustable wrist strap with alligator clip tip

7. Inner conducting layer made of stainless shell filaments

8. Durable Polyurethane Coated Coil Cords.

9. High Quality Strain relief.

10. Soft elastic band for comfort.

11. Current limiting resistor 1M ohm 5%

12. Electro-scattering time 0.1sec

13. Rinsing Resisting

CH000641
€2.70

Anti-Static Wristband Wrist Strap Band ESD Discharge PC Electricity Grounding

wishlist
Compare

Realtek RTL8110SBL

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000489
€3.45

Realtek RTL8110SBL

wishlist
Compare

ATHEROS AR8131AL

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000490
€3.45

ATHEROS AR8131-AL

wishlist
Compare

2.0m OMEGA KTYPE Thermocouple TTK30SLE

OMEGA thermocouple line

Model: temperature range: -200? ~260? (PTFE material) -200-500? (glass fiber material)

Wire diameter: 2*F0.127mm 2*0.255MM

Core material: nickel chromium / nickel silicon (K) copper / constantan (T) iron / copper nickel (J)

Color mark: red is negative / yellow is positive

The thermocouple temperature line for any K type imported and domestic use temperature recording instrument, used in the laboratory, aerospace engineering, shipbuilding, petrochemical, machinery fittings (reflow) etc.

CH000647
€6.84

2.0m OMEGA K-TYPE Thermocouple TT-K-30-SLE

wishlist
Compare

Maxim MAX17030

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000493
€3.45

Maxim MAX17030

wishlist
Compare

Intersil ISL6529CB

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000496
€3.45

Intersil ISL6529CB

wishlist
Compare

HYNIX H5GQ1H24AFR T2C

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000502
€4.77

HYNIX H5GQ1H24AFR T2C

wishlist
Compare

TC90428XBG2 TOSHIBA CHIPS

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000504
€15.09

TC90428XBG-2 TOSHIBA CHIPS

wishlist
Compare
Back to top