• Show Sidebar

There are 511 products.

Active filters

  • Categories: Multimeter, Test Tools
  • Categories: Pin Holder
  • Categories: Programmer & Sockets

TL866II PLUS Programmer EEPROM Support NAND Flash AVR MCU GAL PIC SPI 91 Adapter Extractor Clip

TL866II PLUS Programmer can use for items list:

Login to Download: Download software Device Support List instruction manual

Programmer Overview

1.1 Performance Introduction

Carefully built low-cost professional programmer, high-density chip production process, a

unified user interface, easy to use, functional integrity, application software, reliable

operation, code small, faster execution. supported operating system:

WINXP WIN2003 WIN2008 VISTA WIN7 WIN8 WIN10 32-bit or 64-bit operating system

? The programming speed is greatly improved. It is suitable for small batch production and supports 4 programmers for one computer.

? A wide range of chip support, the initial version supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test, 54/74 and CMOS4000 integrated circuit integrated functional test.

Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits.

25 series Nor Flash capacity support to 512Mbits.

? Pin contact check function, poor contact pin can pinpoint

? Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming

without external power integrated programmer. Portable performance super: the world's smallest volume, size 10CM * 6CM * 2.5CM, only the size of the driver's license.

? Programmable VCC from 1.8V to 6.5V, VPP from 1.8V to 18V chip

? Chip serial number secondary development functions: Programmer built a variety of commonly used automatic numbering function. And can use a custom algorithm to achieve any sequence number through DLL dynamic library. This feature allows you to produce

a unique identification info rmation for each chip in mass production. The logo can also be encrypted with a custom algorithm to more effectively protect your product's rights.

? Universal serial programming interface ICSP (to support both high-voltage parallel programming and low-volt age serial programming). Note: ICSP now supports 24-Series 25 Series 93 Series Serial Integrated Circuits, ATMEL89S51,52, AVR ATMEGAxxx Full

Series, and MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx Full Series, and the new series of SYNCMOS SM59Dxx SM59Rxx fu ll range chips for in-circuit serial programming.

? Powerful 54 / 74F / LS / HC CMOS4000 Series Integrated Functionality Tests: The First Development Programmer to Test Common Logic ICs True, Test Errors Locating Logic Gate Circuits, Test Arbitrary Possible input combinations.

1.2 Programmer chip support range

? Variety of 26 27 28 29 37 39 49 50 series of parallel ROM, EPROM, EEPROM

Fast, full support. Support TSOP32 TSOP40 TSOP48 chips to 64MBits, will join the TSOP56 pin support.

(TL866II programming voltage VPP only supports up to 18V, for early 27C series ROM, the

chip with 21V 25V VPP voltage no longer supports writing, but can be read. If it is used,

the VPP with the same type of programming voltage can be used as 13V or 12V chip replacement, for example: 27C32 21V or 13V Vpp chip,Pay attention to the VPP voltage)

? 24 25 35 45 85 93 95 Series Serial EEPROM

Serial Series Chip Support Full, Supports Chip Capacity 25 Series 8 or 16PIN to 512MBits (64M Bytes)

? NAND FLASH chip supports up to 8Gbits

? MCU series, hundreds of models of 51 series of microcomputer

? AVR microcontroller package scratch ATMEGA series ATtiny series AT90XXX series of microcontrollers, all AVR ATMEGAxxx chip also supports the ICSP interface for SPI serial download programming. Support AVR one-to-one soft-key with RC correction byte.

? MICROCHIP PIC10 PIC12 PIC16 PIC18 Series Microcontroller:

PIC series of more than 300 models, more than 900 package chip support, currently supports

one of the most complete PIC chip integrated programmer. For vario

us types of PIC monolithic, in strict accordance with the manufacturer's manual requirements, the optimal programming, programming speed is excellent. The vast majority of chips support both ISCP online programming and programming through programming sockets.

? GAL programmable logic device programming

? SRAM test

Support for common 24 61 62 DS12 series SRAM test, respectively, to data line testing,

address line testing, memory unit incremental testing and unit testing.

? Super performance 54 / 74F / LS / HC CMO

S4000 series integrated circuit integrated

Function test:

The first development-type programmer to really test common logic ICs to test for errors

that can be located to logic gates, and to test any possible combinations of inputs in an integrated circuit when testing.

Package In clude:

1. 150mil SOP8--DIP8 Adapter

2. 200mil-208mil SOP8--DIP8 Adapter

3. SOP16--DIP16 Adapter

4 PLCC44--DIP40 Adapter

5. PLCC32--DIP32 Adapter

6. PLCC28--DIP24 Adapter

7. PLCC20--DIP20 Adapter

8. 8pin DIP SMD Adapter

9. PLCC IC Extractor

10.SOP 8/SOIC Clip

CH001176
€62.04

TL866II PLUS Programmer EEPROM Support NAND Flash AVR MCU GAL PIC SPI 9+1 Adapter Extractor Clip

LCRTC1 35 Colorful Display Multifunctional TesterTC1 TFT Backlight Transistor Tester

LCR-TC1 3.5inch Colorful Display Multi-functional TFT BacklightTransistor Tester for Diode Triode Capacitor Resistor Transistor LCR ESR NPNPNP MOSFET

Features:

It can be widely used to detect NPN and PNP transistor,capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET,triac and battery etc.

It can also beused to detect infrared wave forms.

It also can detect zener diode and has the function ofself-calibration.

After detection, align the infrared remote control withthe "IR" light, then press the button in the remote control, if thedetector successfully decode it, it will display the data code and infraredwave form.

One button operation, automatically detect and shutdown,and you can press the multi-functional button to close the detector too.

Put the pins of component in corresponding area, thendial the little handle and the detector will test it automatically, finally theresults will display on the back light TFT screen clearly.

Not like the usual black and white display, thisdetector will show results in color.

Specifications:

Display: 3.5inch TFT Screen

Diode Range: < 4.5V

Zener Diode:Transistor Detect Area: 0.01-4.5V

Zener Diode Detect Area: 0.01-30V

Triac Range: IGT < 6mA

Capacitance: 25pF-100mF

Resistor: 0.01-50M?

Inductance: 0.01mH-20H

Battery: 0.1-4.5V

Power Mode: Rechargeable Lithium Battery (INCLUDED)

Item Size: 8.8 x 8 x 2.8cm / 3.47 x 3.15 x 1.10in

Item Weight: 111.5g / 3.94oz

Package Size: 14.5 x 12 x 2.7cm / 5.71 x 4.73 x 1.06in

Package Weight: 114g / 4.02oz

NEW Function:

1:Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, transistor, resistor and capacitor and other components

2: Automatic test the pin of a component, and display on the LCD

3:Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage

4: Measure the gate and gate capacitance of the MOSFET threshold voltage

5:Use 12864 liquid crystal display with green backlight

Description:

1,One -button operation, automatic shutdown .

2,Only 20nA shutdown current.

3,Automatically detect NPN, PNP bipolar transistors , N -channel and P -channel MOS FET, JFET , diodes , two diodes, thyristors small power unidirectional and bidirectional thyristor.

4,Automatic identification components pin arrangement .

5,Measuring bipolar transistor current amplification factor and base - emitter threshold voltage.

6,Via the base - emitter threshold voltage and high current amplification factor to identify Darlington transistors.

7,Can detect bipolar transistors and MOS transistors protection diodes.

8,Measuring the gate MOS FET threshold voltage and the gate capacitance.

9,Can simultaneously measure two resistors and resistor symbol is displayed. Displayed on the right with a decimal value of 4 . Resistance symbol on both sides shows the pin number. So you can measure the potentiometer. If the potentiometer wiper is not transferred to an extreme position , we can distinguish the middle and both ends of the pin.

10,Resistance measurement resolution is 0.1 ohms , 50M ohms can be measured .

11,Can measure capacitanceCan measure capacitance of 30pF-100mF , resolution 1pF.

12.2uF more capacitors can simultaneously measure the equivalent series resistance ESR values. The two can be displayed with a decimal value , resolution 0.01 ohms.

13,Can be in the correct order and the diode symbol display two diodes , and gives the diode forward voltage.

14.LED is detected as a diode forward voltage higher . Combo of the LED is identified as two diodes.

15,Eeverse breakdown voltage is less than 4.5V Zener diode can be identified.

16,Can measure a single diode reverse capacitance. If the bipolar transistor connected to the base and collector or emitter of a pin , it can measure the collector or emitter junction reverse capacitance .

18 can be obtained with a single measurement rectifier bridge connection.

Notice: Before measuring capacitance , the capacitor must be discharged , otherwise very likely damage the meter .

Package Included:

1 x Pocketable Transistor tester is the LCR - TC1 full color graphics display

CH003314
€19.27

LCR-TC1 3.5 Colorful Display Multi-functional Tester-TC1 TFT Backlight Transistor Tester

TV18 Test Tool for Panel Problems LED LCD Screen Tester Support 784 LVDS Screen

LED LCD Screen Tester Detection Tool For TV Laptop Computer Repair Support 7-84 LED LCD Screen

Login to Download: * User manual Buy QK-72333+2K-4K Tester Adapter

Warm tip:

1.Please kindly note that there is Engilsh manual,so no need to worry about how to use it.If you need any help,please feel free to contact us.

2.Don't try to disassemble or open it . After display show 88, it will be automatically locked, can not be used and we can't change it for you.

3.Powered by 12V 4A adapter

Update:

1.Built-in 55 programes, 12 test pictures

2.Support to 7- 84 panel

3.Resolutions: support up to 1920x1200

4.Short circuit protection.

Product highlights:

1.More convenient, durable, efficient and practical

2. Support New 3V 5V 12V LED LCD screen backlight , LVDS interface

3. Support 55 kinds of programs, 12 test pictures

4. Support for 7-84 inches LCD and LED Screen

5. Support HD 1920 * 1200

6. Screen tester and inverter tester

7. Short circuit protection

Package includes:

- 1x panel Tester

- 6x Lvds cables

- 1x 1/2/4 Lamp CCFL Backlight Inverter

How to set up Tester to test LCD Screen:

LCD screen test support standard, high-definition full-resolution LVDS signal, built-in 12 test screen, convenient and practical.

Screen switching: can switch cycle test tool built-in 12 kinds of test screen

Quality switch: according to the actual display screen effect, switch to the appropriate quality

Automatic switching: 12 kinds of test screen automatically cycle display

VGA input interface: insert the computer VGA signal, that is displayed on the LCD screen, the tester without any switch

VGA output interface: the tester can be 12 kinds of internal test screen signal through the VGA cable to another display,

to determine whether the display does not light, the equivalent of a VGA signal source.

Attention:

To use this tool, you need to know screen voltage ,the resolution of the LCD/LED screen and the bit number of the LVDS cable for the panel, then check them against the list of screen parameter on the panel to find the right parameter and input it with the + key and - key on the panel digital tude.

Detailed information about the LVDS cables: (not included 14 pcs LVDS/FPC),included 6x Lvds cables

DF14-20Pin-S8

DF14-20Pin-S6

FIX-30Pin-S8 (power on left) bit

FIX-30Pin-S8 (power on right) bit

FIX-30Pin-D6 (power on left) bit

FIX-30Pin-D8 (power on left) bit

FIX-51Pin-D8 (power on left) bit (Most universal LVDS cable for 32-65 screen)

FIX-51Pin-D8 (power on right) bit (Most universal LVDS cable for 32-65 screen)

FIX-30Pin-D8 (power on left) bit (for 17-42 screen)

FIX-30Pin-D8 (power on right) bit (for 17-42 screen)

FPC-LVDS-30Pin-S8 (power on left) bit

FPC-LVDS-30Pin-S8 (power on right) bit

LP-40Pin-D6(LED laptop HD)

LP-40Pin-S6(LED laptop SD)

Totally 14 pcs LVDS/FPC cables for 12-65 laptop/TV screen

CH003394
€42.15

T-V18 Test Tool for Panel Problems LED LCD Screen Tester Support 7-84 LVDS Screen

QFP48 to DIP48 CHIP PROGRAMMER SOCKET QFP48DIP48REV1 adapter socket support ATMEGA8 series

The original Taiwan block (0.5mm foot distance), has a long service life, suitable for TQFP48, LQFP48, QFP48 and 0.5mm chip size letter spacing.

The suitable model and programmer. Such as: Zhou Ligong, ALL-100GANG, ALL-11 series, LT-48 series, SuperPRO series, TOP series programmer

Support chip: such as STM32F103C8T6, STM32LXX, C8051F340 and so on.

The chip size map:

CH001195
€32.00

QFP48 to DIP48 CHIP PROGRAMMER SOCKET QFP48-DIP48-REV1 adapter socket support ATMEGA8 series

GA1102CAL 1Gsas 100MHz TFT 7 inch LCD Digital Oscilloscope Probe 2 Channel GW

The oscilloscope can put the invisible power to the naked eye the electrical signals into visible image, convenient for people to study the changing process of various electrical phenomena. The item with ultrathin and compact design for portable use.

Features:

2-channel digital storage oscilloscope, 100MHz bandwidth.

1GSa/s sampling rate for single channel, 500MSa/s sampling rate for dual channel.

7" TFT color screen for clear and stable waveform display.

Storage/ Memory depth: single channel: 40Kpts; double channels: 20Kpts.

Various trigger functions: Edge, Pulse, Video, Slope and Alternation.

32 kinds of automatic measurement and manual cursor tracking measurement functions.

Two groups of reference waveforms, 16 groups of common waveforms, 20 groups of internal storage/output; support waveform setting, external storage and output of CSV and bitmap file by USB flash disc (CSV and bitmaps cannot be output from USB flash disc).

Shortcut key to PRINT, support print screen.

Standard configuration interfaces: USB Host, USB Device, RS-232.

Can be widely used in industrial power and electronics design, troubleshooting, installation, maintenance, production test and quality inspection, etc.

Specifications:

Input

Input coupling AC, DC, GND

Input impedance 1MO 3% || 16pF 3pF

Maximum input voltage 400V (DC+AC peak value, 1MO input impedance)

Probe attenuation 1X, 10X

Signal acquisition system

Sampling mode Real-time sampling

Sampling rate Single channel 1GSa/s, dual channel 500MSa/s

Storage depth

Single channel 40kpts; Dual channel 20kpts

Acquire mode Sampling, peak value detection, average value

Average time 4, 16, 32, 64, 128, 256

Vertical system

Vertical sensitivity 2mV/div - 5V/div (1-2-5 step-by-step)

Channel voltage offset range 10div offset from the screen center

Vertical resolution 8bit

Channel amount 2

Bandwidth 100MHz

AC plus accuracy 2mV/div =4%, the rest gears =3%

DC measurement accuracy [DC measurement accuracy x reading+ (1% x vertical displacement reading) +0.2div]

Rise time

< 3.5ns

Vertical coupling AC,DC,GND

Arithmetical operation +, -, , , FFT

FFT

Window mode: Hanning, Hamming, Blackman; Sampling points : 1024

Bandwidth limit 20MHz (-3dB)

Horizontal system

Time base 2ns/div ~ 50s/div, step 32 gears according to sequence 1-2-5

Horizontal displacement range 100div

Display mode Y-T mode, X-Y mode

X-Y mode phase difference 3 Degrees

Display type Point display, vector display

Trigger system

Trigger type Edge, pulse, video, slope, alternation

Trigger signal source CH1, CH2, EXT, EXT/5, AC Line

Trigger mode Auto, normal, single

Trigger coupling DC, AC, Low-frequency rejection, high-frequency rejection

Trigger electric level range CH1, CH2:10div

EXT: 1.5V

EXT/5: 7.5V

Trigger sensitivity CH1, CH2: =1div

EXT: =0.15V

EXT/5: =0.75V

Hold-off range 100ns ~10s

Edge trigger Type: rise, descend, rise and descend edge

Pulse width trigger Type: (>, <, =) positive pulse width

(>, <, =) negative pulse width

Pulse width: 20ns ~ 10s

Pulse width resolution: 5ns or 1? (take the higher value)

Video trigger Support signal system: PAL, NTSC

Trigger condition: odd field, even field, all rows, specified row

Slope trigger (>, <, =) positive slope

(>, <, =) negative slope

Time setup: 20ns-10s

Alternating trigger CH1 trigger type: edge, pulse, video, slope

CH2 trigger type: edge, pulse, video, slope

Measurement system

Automatic measurement (32 kinds) Maximal valve, minimal value, peak-to-peak value, amplitude, top value, bottom value, periodic average value, average value, periodic mean square root, mean square root, rise extreme, descend extreme, rise time, descend time, frequency, period, pulse width, positive pulse width, negative pulse width, positive duty ratio, negative duty ratio, phase, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF

Cursor measurement Manual measurement mode, cursor tracking measurement mode

Control panel Function

Auto setup The auto setup function can realize automatic regulation of the vertical system, the horizontal system and the trigger position.

Save/recall 2 groups of reference waveform, 16 groups of common waveform, 16 groups of setups; save and recall from USB flash drive of the waveform, setups, CSV and bitmap files (CSV and the bitmaps cannot be recalled from the USB flash disc) are supported.

Hardware frequency counter

Reading resolution ratio 6 bits

Range Alternating-current coupling, from 10Hz to the maximal bandwidth

Signal source All sources capable of being triggered in pulse trigger or edge trigger type

Display system

Display type TFT 7-inch (178mm) LCD

Display resolution ratio 800 (horizontal) pixels x 480 (vertical) pixels

Display color 64k color

Contrast ratio (typical) 500:1

Background intensity (typical) 300 Cd/m2

Waveform display range 14 8 grids

Afterglow Off, 1 second, 2 seconds, 5 seconds, infinite

Menu display 2 seconds, 5 seconds, 10 seconds, 20 seconds, infinite

Screen saver Off, 1min, 2min, 5min, 10min, 15min, 20min, 1h, 2h, 5h

Interpolation mode Sine interpolation, linear interpolation

Screen color mode Normal, inverse phase

Display language Simplified Chinese, English

Power supply

Power voltage 100-240 VAC, CAT II, auto selection

AC power supply frequency range 45Hz to 440Hz

Consumed power 50VA Max

Environment

Temperature Operating: 10 oC to +40 oC

Non operating: -20 oC to +60 oC

Cooling Forced cooling of fan

Humidity = 90% below 40 oC

Height Operating: smaller than 3000m

Non operating: smaller than 15000m

Plug Type: US / EU(optional)

Power Supply: AC100-240V

Item Size: 33.5 * 13 * 15cm / 13.19 * 5.12 * 5.91in

Item Weight: 2.34kg / 5.16lb

Package Size: 38 * 22 * 26cm / 14.96 * 8.66 * 10.24in

Package Weight: 3.42kg / 7.53lb

Package List:

1 * Digital Storage Oscilloscope

1 * Pair of Oscilloscope Probes

1 * USB Cable

1 * Power Line

1 * Data CD

CH003463
€304.58

GA1102CAL 1Gsa/s 100MHz TFT 7 inch LCD Digital Oscilloscope Probe 2 Channel GW

TL866II PLUS Programmer EEPROM Support NAND Flash AVR MCU GAL PIC SPI 91 Adapter Extractor Clip

TL866II PLUS Programmer can use for items list:

Login to Download: Download software Device Support List instruction manual

Programmer Overview

1.1 Performance Introduction

Carefully built low-cost professional programmer, high-density chip production process, a

unified user interface, easy to use, functional integrity, application software, reliable

operation, code small, faster execution. supported operating system:

WINXP WIN2003 WIN2008 VISTA WIN7 WIN8 WIN10 32-bit or 64-bit operating system

? The programming speed is greatly improved. It is suitable for small batch production and supports 4 programmers for one computer.

? A wide range of chip support, the initial version supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test, 54/74 and CMOS4000 integrated circuit integrated functional test.

Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits.

25 series Nor Flash capacity support to 512Mbits.

? Pin contact check function, poor contact pin can pinpoint

? Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming

without external power integrated programmer. Portable performance super: the world's smallest volume, size 10CM * 6CM * 2.5CM, only the size of the driver's license.

? Programmable VCC from 1.8V to 6.5V, VPP from 1.8V to 18V chip

? Chip serial number secondary development functions: Programmer built a variety of commonly used automatic numbering function. And can use a custom algorithm to achieve any sequence number through DLL dynamic library. This feature allows you to produce

a unique identification info rmation for each chip in mass production. The logo can also be encrypted with a custom algorithm to more effectively protect your product's rights.

? Universal serial programming interface ICSP (to support both high-voltage parallel programming and low-volt age serial programming). Note: ICSP now supports 24-Series 25 Series 93 Series Serial Integrated Circuits, ATMEL89S51,52, AVR ATMEGAxxx Full

Series, and MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx Full Series, and the new series of SYNCMOS SM59Dxx SM59Rxx fu ll range chips for in-circuit serial programming.

? Powerful 54 / 74F / LS / HC CMOS4000 Series Integrated Functionality Tests: The First Development Programmer to Test Common Logic ICs True, Test Errors Locating Logic Gate Circuits, Test Arbitrary Possible input combinations.

1.2 Programmer chip support range

? Variety of 26 27 28 29 37 39 49 50 series of parallel ROM, EPROM, EEPROM

Fast, full support. Support TSOP32 TSOP40 TSOP48 chips to 64MBits, will join the TSOP56 pin support.

(TL866II programming voltage VPP only supports up to 18V, for early 27C series ROM, the

chip with 21V 25V VPP voltage no longer supports writing, but can be read. If it is used,

the VPP with the same type of programming voltage can be used as 13V or 12V chip replacement, for example: 27C32 21V or 13V Vpp chip,Pay attention to the VPP voltage)

? 24 25 35 45 85 93 95 Series Serial EEPROM

Serial Series Chip Support Full, Supports Chip Capacity 25 Series 8 or 16PIN to 512MBits (64M Bytes)

? NAND FLASH chip supports up to 8Gbits

? MCU series, hundreds of models of 51 series of microcomputer

? AVR microcontroller package scratch ATMEGA series ATtiny series AT90XXX series of microcontrollers, all AVR ATMEGAxxx chip also supports the ICSP interface for SPI serial download programming. Support AVR one-to-one soft-key with RC correction byte.

? MICROCHIP PIC10 PIC12 PIC16 PIC18 Series Microcontroller:

PIC series of more than 300 models, more than 900 package chip support, currently supports

one of the most complete PIC chip integrated programmer. For vario

us types of PIC monolithic, in strict accordance with the manufacturer's manual requirements, the optimal programming, programming speed is excellent. The vast majority of chips support both ISCP online programming and programming through programming sockets.

? GAL programmable logic device programming

? SRAM test

Support for common 24 61 62 DS12 series SRAM test, respectively, to data line testing,

address line testing, memory unit incremental testing and unit testing.

? Super performance 54 / 74F / LS / HC CMO

S4000 series integrated circuit integrated

Function test:

The first development-type programmer to really test common logic ICs to test for errors

that can be located to logic gates, and to test any possible combinations of inputs in an integrated circuit when testing.

Package In clude:

1. 150mil SOP8--DIP8 Adapter

2. 200mil-208mil SOP8--DIP8 Adapter

3. SOP16--DIP16 Adapter

4 PLCC44--DIP40 Adapter

5. PLCC32--DIP32 Adapter

6. PLCC28--DIP24 Adapter

7. PLCC20--DIP20 Adapter

8. 8pin DIP SMD Adapter

9. PLCC IC Extractor

10.SOP 8/SOIC Clip

CH001176
€62.04

TL866II PLUS Programmer EEPROM Support NAND Flash AVR MCU GAL PIC SPI 9+1 Adapter Extractor Clip

LCRTC1 35 Colorful Display Multifunctional TesterTC1 TFT Backlight Transistor Tester

LCR-TC1 3.5inch Colorful Display Multi-functional TFT BacklightTransistor Tester for Diode Triode Capacitor Resistor Transistor LCR ESR NPNPNP MOSFET

Features:

It can be widely used to detect NPN and PNP transistor,capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET,triac and battery etc.

It can also beused to detect infrared wave forms.

It also can detect zener diode and has the function ofself-calibration.

After detection, align the infrared remote control withthe "IR" light, then press the button in the remote control, if thedetector successfully decode it, it will display the data code and infraredwave form.

One button operation, automatically detect and shutdown,and you can press the multi-functional button to close the detector too.

Put the pins of component in corresponding area, thendial the little handle and the detector will test it automatically, finally theresults will display on the back light TFT screen clearly.

Not like the usual black and white display, thisdetector will show results in color.

Specifications:

Display: 3.5inch TFT Screen

Diode Range: < 4.5V

Zener Diode:Transistor Detect Area: 0.01-4.5V

Zener Diode Detect Area: 0.01-30V

Triac Range: IGT < 6mA

Capacitance: 25pF-100mF

Resistor: 0.01-50M?

Inductance: 0.01mH-20H

Battery: 0.1-4.5V

Power Mode: Rechargeable Lithium Battery (INCLUDED)

Item Size: 8.8 x 8 x 2.8cm / 3.47 x 3.15 x 1.10in

Item Weight: 111.5g / 3.94oz

Package Size: 14.5 x 12 x 2.7cm / 5.71 x 4.73 x 1.06in

Package Weight: 114g / 4.02oz

NEW Function:

1:Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, transistor, resistor and capacitor and other components

2: Automatic test the pin of a component, and display on the LCD

3:Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage

4: Measure the gate and gate capacitance of the MOSFET threshold voltage

5:Use 12864 liquid crystal display with green backlight

Description:

1,One -button operation, automatic shutdown .

2,Only 20nA shutdown current.

3,Automatically detect NPN, PNP bipolar transistors , N -channel and P -channel MOS FET, JFET , diodes , two diodes, thyristors small power unidirectional and bidirectional thyristor.

4,Automatic identification components pin arrangement .

5,Measuring bipolar transistor current amplification factor and base - emitter threshold voltage.

6,Via the base - emitter threshold voltage and high current amplification factor to identify Darlington transistors.

7,Can detect bipolar transistors and MOS transistors protection diodes.

8,Measuring the gate MOS FET threshold voltage and the gate capacitance.

9,Can simultaneously measure two resistors and resistor symbol is displayed. Displayed on the right with a decimal value of 4 . Resistance symbol on both sides shows the pin number. So you can measure the potentiometer. If the potentiometer wiper is not transferred to an extreme position , we can distinguish the middle and both ends of the pin.

10,Resistance measurement resolution is 0.1 ohms , 50M ohms can be measured .

11,Can measure capacitanceCan measure capacitance of 30pF-100mF , resolution 1pF.

12.2uF more capacitors can simultaneously measure the equivalent series resistance ESR values. The two can be displayed with a decimal value , resolution 0.01 ohms.

13,Can be in the correct order and the diode symbol display two diodes , and gives the diode forward voltage.

14.LED is detected as a diode forward voltage higher . Combo of the LED is identified as two diodes.

15,Eeverse breakdown voltage is less than 4.5V Zener diode can be identified.

16,Can measure a single diode reverse capacitance. If the bipolar transistor connected to the base and collector or emitter of a pin , it can measure the collector or emitter junction reverse capacitance .

18 can be obtained with a single measurement rectifier bridge connection.

Notice: Before measuring capacitance , the capacitor must be discharged , otherwise very likely damage the meter .

Package Included:

1 x Pocketable Transistor tester is the LCR - TC1 full color graphics display

CH003314
€19.27

LCR-TC1 3.5 Colorful Display Multi-functional Tester-TC1 TFT Backlight Transistor Tester

TV18 Test Tool for Panel Problems LED LCD Screen Tester Support 784 LVDS Screen

LED LCD Screen Tester Detection Tool For TV Laptop Computer Repair Support 7-84 LED LCD Screen

Login to Download: * User manual Buy QK-72333+2K-4K Tester Adapter

Warm tip:

1.Please kindly note that there is Engilsh manual,so no need to worry about how to use it.If you need any help,please feel free to contact us.

2.Don't try to disassemble or open it . After display show 88, it will be automatically locked, can not be used and we can't change it for you.

3.Powered by 12V 4A adapter

Update:

1.Built-in 55 programes, 12 test pictures

2.Support to 7- 84 panel

3.Resolutions: support up to 1920x1200

4.Short circuit protection.

Product highlights:

1.More convenient, durable, efficient and practical

2. Support New 3V 5V 12V LED LCD screen backlight , LVDS interface

3. Support 55 kinds of programs, 12 test pictures

4. Support for 7-84 inches LCD and LED Screen

5. Support HD 1920 * 1200

6. Screen tester and inverter tester

7. Short circuit protection

Package includes:

- 1x panel Tester

- 6x Lvds cables

- 1x 1/2/4 Lamp CCFL Backlight Inverter

How to set up Tester to test LCD Screen:

LCD screen test support standard, high-definition full-resolution LVDS signal, built-in 12 test screen, convenient and practical.

Screen switching: can switch cycle test tool built-in 12 kinds of test screen

Quality switch: according to the actual display screen effect, switch to the appropriate quality

Automatic switching: 12 kinds of test screen automatically cycle display

VGA input interface: insert the computer VGA signal, that is displayed on the LCD screen, the tester without any switch

VGA output interface: the tester can be 12 kinds of internal test screen signal through the VGA cable to another display,

to determine whether the display does not light, the equivalent of a VGA signal source.

Attention:

To use this tool, you need to know screen voltage ,the resolution of the LCD/LED screen and the bit number of the LVDS cable for the panel, then check them against the list of screen parameter on the panel to find the right parameter and input it with the + key and - key on the panel digital tude.

Detailed information about the LVDS cables: (not included 14 pcs LVDS/FPC),included 6x Lvds cables

DF14-20Pin-S8

DF14-20Pin-S6

FIX-30Pin-S8 (power on left) bit

FIX-30Pin-S8 (power on right) bit

FIX-30Pin-D6 (power on left) bit

FIX-30Pin-D8 (power on left) bit

FIX-51Pin-D8 (power on left) bit (Most universal LVDS cable for 32-65 screen)

FIX-51Pin-D8 (power on right) bit (Most universal LVDS cable for 32-65 screen)

FIX-30Pin-D8 (power on left) bit (for 17-42 screen)

FIX-30Pin-D8 (power on right) bit (for 17-42 screen)

FPC-LVDS-30Pin-S8 (power on left) bit

FPC-LVDS-30Pin-S8 (power on right) bit

LP-40Pin-D6(LED laptop HD)

LP-40Pin-S6(LED laptop SD)

Totally 14 pcs LVDS/FPC cables for 12-65 laptop/TV screen

CH003394
€42.15

T-V18 Test Tool for Panel Problems LED LCD Screen Tester Support 7-84 LVDS Screen

QFP48 to DIP48 CHIP PROGRAMMER SOCKET QFP48DIP48REV1 adapter socket support ATMEGA8 series

The original Taiwan block (0.5mm foot distance), has a long service life, suitable for TQFP48, LQFP48, QFP48 and 0.5mm chip size letter spacing.

The suitable model and programmer. Such as: Zhou Ligong, ALL-100GANG, ALL-11 series, LT-48 series, SuperPRO series, TOP series programmer

Support chip: such as STM32F103C8T6, STM32LXX, C8051F340 and so on.

The chip size map:

CH001195
€32.00

QFP48 to DIP48 CHIP PROGRAMMER SOCKET QFP48-DIP48-REV1 adapter socket support ATMEGA8 series

GA1102CAL 1Gsas 100MHz TFT 7 inch LCD Digital Oscilloscope Probe 2 Channel GW

The oscilloscope can put the invisible power to the naked eye the electrical signals into visible image, convenient for people to study the changing process of various electrical phenomena. The item with ultrathin and compact design for portable use.

Features:

2-channel digital storage oscilloscope, 100MHz bandwidth.

1GSa/s sampling rate for single channel, 500MSa/s sampling rate for dual channel.

7" TFT color screen for clear and stable waveform display.

Storage/ Memory depth: single channel: 40Kpts; double channels: 20Kpts.

Various trigger functions: Edge, Pulse, Video, Slope and Alternation.

32 kinds of automatic measurement and manual cursor tracking measurement functions.

Two groups of reference waveforms, 16 groups of common waveforms, 20 groups of internal storage/output; support waveform setting, external storage and output of CSV and bitmap file by USB flash disc (CSV and bitmaps cannot be output from USB flash disc).

Shortcut key to PRINT, support print screen.

Standard configuration interfaces: USB Host, USB Device, RS-232.

Can be widely used in industrial power and electronics design, troubleshooting, installation, maintenance, production test and quality inspection, etc.

Specifications:

Input

Input coupling AC, DC, GND

Input impedance 1MO 3% || 16pF 3pF

Maximum input voltage 400V (DC+AC peak value, 1MO input impedance)

Probe attenuation 1X, 10X

Signal acquisition system

Sampling mode Real-time sampling

Sampling rate Single channel 1GSa/s, dual channel 500MSa/s

Storage depth

Single channel 40kpts; Dual channel 20kpts

Acquire mode Sampling, peak value detection, average value

Average time 4, 16, 32, 64, 128, 256

Vertical system

Vertical sensitivity 2mV/div - 5V/div (1-2-5 step-by-step)

Channel voltage offset range 10div offset from the screen center

Vertical resolution 8bit

Channel amount 2

Bandwidth 100MHz

AC plus accuracy 2mV/div =4%, the rest gears =3%

DC measurement accuracy [DC measurement accuracy x reading+ (1% x vertical displacement reading) +0.2div]

Rise time

< 3.5ns

Vertical coupling AC,DC,GND

Arithmetical operation +, -, , , FFT

FFT

Window mode: Hanning, Hamming, Blackman; Sampling points : 1024

Bandwidth limit 20MHz (-3dB)

Horizontal system

Time base 2ns/div ~ 50s/div, step 32 gears according to sequence 1-2-5

Horizontal displacement range 100div

Display mode Y-T mode, X-Y mode

X-Y mode phase difference 3 Degrees

Display type Point display, vector display

Trigger system

Trigger type Edge, pulse, video, slope, alternation

Trigger signal source CH1, CH2, EXT, EXT/5, AC Line

Trigger mode Auto, normal, single

Trigger coupling DC, AC, Low-frequency rejection, high-frequency rejection

Trigger electric level range CH1, CH2:10div

EXT: 1.5V

EXT/5: 7.5V

Trigger sensitivity CH1, CH2: =1div

EXT: =0.15V

EXT/5: =0.75V

Hold-off range 100ns ~10s

Edge trigger Type: rise, descend, rise and descend edge

Pulse width trigger Type: (>, <, =) positive pulse width

(>, <, =) negative pulse width

Pulse width: 20ns ~ 10s

Pulse width resolution: 5ns or 1? (take the higher value)

Video trigger Support signal system: PAL, NTSC

Trigger condition: odd field, even field, all rows, specified row

Slope trigger (>, <, =) positive slope

(>, <, =) negative slope

Time setup: 20ns-10s

Alternating trigger CH1 trigger type: edge, pulse, video, slope

CH2 trigger type: edge, pulse, video, slope

Measurement system

Automatic measurement (32 kinds) Maximal valve, minimal value, peak-to-peak value, amplitude, top value, bottom value, periodic average value, average value, periodic mean square root, mean square root, rise extreme, descend extreme, rise time, descend time, frequency, period, pulse width, positive pulse width, negative pulse width, positive duty ratio, negative duty ratio, phase, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF

Cursor measurement Manual measurement mode, cursor tracking measurement mode

Control panel Function

Auto setup The auto setup function can realize automatic regulation of the vertical system, the horizontal system and the trigger position.

Save/recall 2 groups of reference waveform, 16 groups of common waveform, 16 groups of setups; save and recall from USB flash drive of the waveform, setups, CSV and bitmap files (CSV and the bitmaps cannot be recalled from the USB flash disc) are supported.

Hardware frequency counter

Reading resolution ratio 6 bits

Range Alternating-current coupling, from 10Hz to the maximal bandwidth

Signal source All sources capable of being triggered in pulse trigger or edge trigger type

Display system

Display type TFT 7-inch (178mm) LCD

Display resolution ratio 800 (horizontal) pixels x 480 (vertical) pixels

Display color 64k color

Contrast ratio (typical) 500:1

Background intensity (typical) 300 Cd/m2

Waveform display range 14 8 grids

Afterglow Off, 1 second, 2 seconds, 5 seconds, infinite

Menu display 2 seconds, 5 seconds, 10 seconds, 20 seconds, infinite

Screen saver Off, 1min, 2min, 5min, 10min, 15min, 20min, 1h, 2h, 5h

Interpolation mode Sine interpolation, linear interpolation

Screen color mode Normal, inverse phase

Display language Simplified Chinese, English

Power supply

Power voltage 100-240 VAC, CAT II, auto selection

AC power supply frequency range 45Hz to 440Hz

Consumed power 50VA Max

Environment

Temperature Operating: 10 oC to +40 oC

Non operating: -20 oC to +60 oC

Cooling Forced cooling of fan

Humidity = 90% below 40 oC

Height Operating: smaller than 3000m

Non operating: smaller than 15000m

Plug Type: US / EU(optional)

Power Supply: AC100-240V

Item Size: 33.5 * 13 * 15cm / 13.19 * 5.12 * 5.91in

Item Weight: 2.34kg / 5.16lb

Package Size: 38 * 22 * 26cm / 14.96 * 8.66 * 10.24in

Package Weight: 3.42kg / 7.53lb

Package List:

1 * Digital Storage Oscilloscope

1 * Pair of Oscilloscope Probes

1 * USB Cable

1 * Power Line

1 * Data CD

CH003463
€304.58

GA1102CAL 1Gsa/s 100MHz TFT 7 inch LCD Digital Oscilloscope Probe 2 Channel GW