• Show Sidebar

There are 383 products.

Active filters

  • Categories: EFI Rom Cable
  • Categories: Programmer & Sockets
  • Categories: Programmer socket

Complete TSOP56 adapter set IC socket only for TNM5000 Programmer Model 556T2

TNM5000 TSOP56 adapter Device support list

TSOP56 adapter Device support list

Login to Download: * items list Download

lease note: This adapter set is only for TNM5000 Programmer. Other programmers cannot use it!

Description:

This adapter set can be used for TSOP56 package chips. For All 56 Pins TSOP Type-1 (20mm Pin-Pin Lenght) , You Need Only one adaptor Model 556T2 , with different sets of bottom plates which can be easily exchanged by user.

The set comes with 1 TSOP56 ZIF board and 4 base boards, just like the pictures show.

Package include:

1pcs TNM TSOP56 ZIF Socket top board (made in Japan)

1pcs TNM TSOP561 bottom board

1pcs TNM TSOP562 bottom board

1pcs TNM TSOP563 base board

1pcs TNM TSOP564 base board

CH002442
€69.00

Complete TSOP56 adapter set IC socket only for TNM5000 Programmer Model 556T2

TNM5000 USB fast ISP EEPROM universal Programmer TSOP48 TSOP56 adapter set IC socket

TNM5000 Universal Programmer Introduction

Login to Download: * Programmer latest Software

User Manual Device List Nand Software Utility Software for RS232 & USB Bl a ster Emulation

? 23000 Supported Devices Flash Memory (Parallel / Nand /Serial) , EPROM , EEPROM , Serial EEPROM , Microcontroller , NVRAM , FRAM , CPLD , PLD , FPGA).

? 48-Pins ZIF Socket with Pin Continuity tester & 10-Pins ISP/JTAG Connector.

? USB 2.0 High Speed ,Program 1 Gbit Nand Flash less than 50 sec , Reading Serial Flash memory with 6 Mbit/Sec Speed.

? Auto detection of all flash Memories/Microcontrollers with Device ID.

? User friendly software for Windows XP/VISTA/7/8 (32,64 bits).

? Multiple Programming is possible by attaching 2 or more Programmers to one PC.

? Very low cost Main Unit & Low cost adaptors.

? Special Abilities like, Altera US,B-B.l*a*s.ter Emulation for Quartus Software, Serial Port Emulation , Vehicle ECU , Immoblizer & Dashboard microcontroller Support.

Parallel Flash Memories: up to 56 pins parallel flash memories are supported by TNM5000. it Supports different kind of packages (PLCC , TSOP1 , TSOP2 ,VSOP & ...).

All Flashes can be automatically detected by software in case of unreadable device names. By using a single adaptor for all 32-48 pins TSOP flashes , user only need 1 adaptor for over 2000 flash chips.

Nand Flash Memories: TNM5000 has an additional Nand+ software , specially designed for Nand flash memories. Nand+ Software has one of the most complete list of Nand flash Memories with algorithms for correction of bad data in MLC Nand Flashes. TNM5000 is one of the fastest Nand Programmers in the world with Read & Write Speed up to 8 MegaByte per Second. All Nand Flashes can be automatically detected by software in case of unreadable or remarked device names.

Serial Flash Memories: All 8-16 Pins Serial SPI flash memories are supported by TNM5000. All SPI flash Memories can be detected automatically by software in case of unreadable device names. It reads & programs SPi flashes with maximum safe speed on ZIF (6-7 Mbit/second) . Also it Unprotects the write protected flashes before writing data to it.

Microcontrollers:

ATMEL: All AVR 8 bits chips (ATMEGA/ATTINY/AT90S) are supported on ZIF Scocket & by ISP cable. High Voltage Parallel on ZIF Programming of AVR up to 64 pins is supported. newly introduced ATXMEGA Series are supported by both PDI & JTAG Method. Old C51 series & new single cycle C51 series are completely supported. All the above series can be detected automatically by TNM5000. ARM7 programming by JTAG is supported.

Microchip: One of the most complete device list for microchip PIC microcontrollers including all PIC12F /PIC12C /PIC16C / PIC16F / PIC18F / DPIC33F / J & K Series. Devices up to 40 Pins can be programmed on ZIF , All PICs can be detected automatically & programmed by ISP cable.

Others: ST, SST, Philips (NXP) , Motorola , Syncmos, Silicon Lab , ICSI , Infineon , Intel , Winbond & ...

Automotive MCUS: Supporting of ST10F & TMS370 Series by ISP cable for many BOSCH/VALEO/SAGEM ECUs (complete ST10F support of XPROG-m programmer device list). supporting of siemense & infineon SAK-C167 connected to 44 or 48 pins flash (Siemense/BOSCH/SAGEM S2000 ECU) like HSE FlasHit Programmer. Supporting NEC & Motorola Devices for Dashboards.

PLD/CPLD/FPGA: Supporting All ALTERA JTAG Devices by emulation of USB B l a s t e r Programmer in Quartus Software. Supporting of Xilinx CPLD/FPGA with jed file. Fast Xilinx FPGA configuration with bit file. Supporting of GAL/PALCE Devices with special option for PALCE unlocking.

Software: With multiple language support (English / Chinese / Russian /polska /Arabic / French /FARSI). More languages & Devices can be added by customer request. You Can Download Software & run it in Demo mode to evaluate it.

Package List:

1 x TNM5000 Programmer

1 x TSOP56 adapter set IC socket (5PCS)

1 x TSOP48 adapter set IC socket

1 x usb cable

1 x software CD

CH002464
€439.01

TNM5000 USB fast ISP EEPROM universal Programmer + TSOP48 TSOP56 adapter set IC socket

TL866II PLUS Programmer EEPROM Support NAND Flash AVR MCU GAL PIC SPI 27 Universal Adapter BGA48 BGA63

TL866II PLUS Programmer can use for items list:

Login to Download: Download software Device Support List instruction manual

Programmer Overview

1.1 Performance Introduction

Carefully built low-cost professional programmer, high-density chip production process, a

unified user interface, easy to use, functional integrity, application software, reliable

operation, code small, faster execution. supported operating system:

WINXP WIN2003 WIN2008 VISTA WIN7 WIN8 WIN10 32-bit or 64-bit operating system

? The programming speed is greatly improved. It is suitable for small batch production and supports 4 programmers for one computer.

? A wide range of chip support, the initial version supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test, 54/74 and CMOS4000 integrated circuit integrated functional test.

Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits.

25 series Nor Flash capacity support to 512Mbits.

? Pin contact check function, poor contact pin can pinpoint

? Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming

without external power integrated programmer. Portable performance super: the world's smallest volume, size 10CM * 6CM * 2.5CM, only the size of the driver's license.

? Programmable VCC from 1.8V to 6.5V, VPP from 1.8V to 18V chip

? Chip serial number secondary development functions: Programmer built a variety of commonly used automatic numbering function. And can use a custom algorithm to achieve any sequence number through DLL dynamic library. This feature allows you to produce

a unique identification info rmation for each chip in mass production. The logo can also be encrypted with a custom algorithm to more effectively protect your product's rights.

? Universal serial programming interface ICSP (to support both high-voltage parallel programming and low-volt age serial programming). Note: ICSP now supports 24-Series 25 Series 93 Series Serial Integrated Circuits, ATMEL89S51,52, AVR ATMEGAxxx Full

Series, and MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx Full Series, and the new series of SYNCMOS SM59Dxx SM59Rxx fu ll range chips for in-circuit serial programming.

? Powerful 54 / 74F / LS / HC CMOS4000 Series Integrated Functionality Tests: The First Development Programmer to Test Common Logic ICs True, Test Errors Locating Logic Gate Circuits, Test Arbitrary Possible input combinations.

1.2 Programmer chip support range

? Variety of 26 27 28 29 37 39 49 50 series of parallel ROM, EPROM, EEPROM

Fast, full support. Support TSOP32 TSOP40 TSOP48 chips to 64MBits, will join the TSOP56 pin support.

(TL866II programming voltage VPP only supports up to 18V, for early 27C series ROM, the

chip with 21V 25V VPP voltage no longer supports writing, but can be read. If it is used,

the VPP with the same type of programming voltage can be used as 13V or 12V chip replacement, for example: 27C32 21V or 13V Vpp chip,Pay attention to the VPP voltage)

? 24 25 35 45 85 93 95 Series Serial EEPROM

Serial Series Chip Support Full, Supports Chip Capacity 25 Series 8 or 16PIN to 512MBits (64M Bytes)

? NAND FLASH chip supports up to 8Gbits

? MCU series, hundreds of models of 51 series of microcomputer

? AVR microcontroller package scratch ATMEGA series ATtiny series AT90XXX series of microcontrollers, all AVR ATMEGAxxx chip also supports the ICSP interface for SPI serial download programming. Support AVR one-to-one soft-key with RC correction byte.

? MICROCHIP PIC10 PIC12 PIC16 PIC18 Series Microcontroller:

PIC series of more than 300 models, more than 900 package chip support, currently supports

one of the most complete PIC chip integrated programmer. For vario

us types of PIC monolithic, in strict accordance with the manufacturer's manual requirements, the optimal programming, programming speed is excellent. The vast majority of chips support both ISCP online programming and programming through programming sockets.

? GAL programmable logic device programming

? SRAM test

Support for common 24 61 62 DS12 series SRAM test, respectively, to data line testing,

address line testing, memory unit incremental testing and unit testing.

? Super performance 54 / 74F / LS / HC CMO

S4000 series integrated circuit integrated

Function test:

The first development-type programmer to really test common logic ICs to test for errors

that can be located to logic gates, and to test any possible combinations of inputs in an integrated circuit when testing.

Package In clude:

a. TL866CS programador con el paquete 1 pcs

b. Connect the USB cable 1 pcs

c. Softerware CD 1 pcs

27 Universal Adapter Package Contents

1. SOP44/PSOP44 Adpater 1 pcs

2. TSOP32/40/48 placa base 1 pcs

3. SOP56-DIP48 adpater 1 pcs

4. TSOP32/40/48 tablero superior de soldadura 1 pcs

5. TSOP48 adaptador 2in 1 base 1 pcs

6. TSOP40 (A) Bit placa Base 1 pcs

7. TSOP40 (B) 16bit placa base 1 pcs

8. TSOP32/40/48 tablero superior de soldadura 1 pcs

9. BGA48 adpater 1 pcs

10.SOP28-DIP28 300mil Adaptador 1 pcs

11. SOP20-DIP20 Adaptador 200-208mil 1 pcs

12. Adaptador 150mil SOP16-DIP16 1 pcs

13. SOP8-DIP8 200-208mil adpater 1 pcs

14. SOP8-DIP8 150mil adpater 1 pcs

15. BGA63 adpater 1 pcs

16. PLCC44-DIP40 1 pcs

17. PLCC32-DIP32 1 pcs

18. PLCC28-DIP24 1 pcs

19. PLCC20-DIP20 1 pcs

20. SOP8/MSOP8/SSOP8/SOP16-DIP16 simple adaptador 1 pcs

21. SOP16/SOP14/SOP8-DIP8 adpater

22. Adaptador SOP8-DIP8 simples 1 pcs

23. TSOP32/40/48-DIP40 NAND adpater

24. 1.8 V Adpater 1 pcs

25. TSSOP28 Adpater 1 pcs

26. SOIC8 SOP8 IC Flash clip 1 pcs

27. PLCC IC Extractor 1 pcs

CH002518
€206.37

TL866II PLUS Programmer EEPROM Support NAND Flash AVR MCU GAL PIC SPI 27 Universal Adapter BGA48 BGA63

OBDSTAR X300 DP Plus X300 PAD2 8inch Tablet Full package C Package

OBDSTAR X300 Key Master DP Plus Diagnosis and Auto key programmer

CONFIGURATIONS

A Package:

Immobilizer+Special function(EEPROM+Key Renewing)Adapter(P001 programmer+C001circuit board+C002 circuit board+W001 cable+W002 data cable+W003 data cable+Toyota smart key Emulator)+others(Ignition coil+Remote tester)

B Package (Calibration with instrument mileage):

Immobilizer+Special function(EEPROM+Key Renewing)+Mileage correction+Adapter(P001 programmer+C001 circuit board+C002 circuit board+W001 data cable+W002 data cable+W003 data cable+Toyota smarkt key Emulator)+others(Ignition coil+Remote tester)

C Package (With meter mileage correction + maintenance to match special functions):

Immobilizer+Mileage correction+Diagnosis+Special function (Oil rest +ABS+Battery matching+ECU programming+EPB+Throttle programming+Airbag rest+TPMS+Steering angle rest+OBDII+DPF+Injector code+Supension matching+Gear learning+CVT learning+EEPROM+Key renewing+ECU cloning)Adapter(P001 programmer+C001 circuit board+C002 circuit board+W001 data cable+W002 data cable+W003 data cable+Toyota smarkt key Emulator)+others(Ignition coil+Remote tester)

This device is a new Android-based vehicle trouble diagnostic device developed for internet applications. It inherits from OBDSTAR advanced diagnosing technology and it is characterized by covering wide range of vehicles, featuring powerful function, and providing precise result. Through vehicle diagnostic OBD connector and variant mobile intelligent terminals, it achieves vehicle trouble diagnosis for full car model and full system vehicle.

Meanwhile, taking advantage of mobile internet, this device integrates more application and service, such as Maintenance Database, remote assistant, One Key Upgrade etc.

OBDSTAR X300 DP Plus X300 PAD2 8inch Tablet (Full package) C Package

OBDSTAR X300 Key Master DP Plus Hardware Advantages:

1. Built-in VCI box

2. 8-inch touchscreen

3. Charge directly via OBD interface

4. Practical and high-end gift box

5. Industrial design with silicone case

6. Back bracket design:prop on the steering wheel or stand on the table

7. With 4 Toyota simulation keys (the fifth is coming soon)

8. P001 programmer: EEPROM adapter + RFID adapter + Key Renew adapter

9. Add the clip of reading SOP 8PIN EEPROM

10. C001/C002 circuit board to read and write chip data with welding

11. IMMO induction coil to detect the key induction coil failure of the vehicle.

12. Add wiring harness of ECU reading by OBD (for ECU cloning and switch activation)

OBDSTAR X300 Key Master DP Plus Software Advantages:

IMMO:

1. EEPROM

2. Renew Key

3. Key programming

4. Remote programming

Cluster Calibrate: wild vehicle coverage, pls check the carlist

Diagnosis: realize all vehicle systems diagnosis

Special Functions

TPS/ABS/EPB/DPF/TPMS/SRS Reset/Fuel Injector/Gear Learning/Battery Matching/ECU Programming/Throttle Matching/

Oil/service reset/Steering Angle Reset/Remote Manual Setting/Electronic Steering Reset/CVT Learning/value Reset

ECU Clone

1. ECU Clone, means ECU duplication.

The device copies all the data from the original vehicle ECU, and then writes all data copied into ECU with the same hardware to realize the same ECU function with the original vehicle.

2. Clone directly when replacing a new or a used ECU!

Without online matching in 4S store or removal of ECU bonding wire for reading and writing! Directly write without dismantling OBD!

3. Three features for ECU Clone:

A. Free of 4S online:

break monopoly from 4S, benefiting automobile maintenance industry

B. Simplified operation procedures: realize foolproof operation

C. Non-dismantling with zero risks: read and write data without dismantling ECU

Switch Activation Function

(Today many instruments or audio of vehicles activate secondary power supply to go into power-on status by relevant module CAN communication on the vehicle, but sometimes an instrument or an audio is separated from vehicle CANBUS network, causing startup failure when it needs to be repaired by an auto technician. This function can simulate CAN communication to activate secondary power supply, so the instrument or the audio enters into power-on status. In this way, it not only can test and verify the instrument or the audio, but also save an enormous cost for an auto technician to purchase a large number of startup platforms of various vehicles and wiring harnesses!)

Add Help Functions

1. including built-in testable vehicle models, upgrade announcement, features, help notes and wiring diagrams, etc.

2. Carlist and upgrade announcement, all details are available on the device

3. Customers can look up the features or uniquely support functions on the device

4. Help notes: built-in help notes for each model or function

5. Wiring diagrams: built-in ECU wiring diagrams, more intuitionistic and convenient

TECHNICAL PARAMETER

? Operation system: Android 5.1.1

? CPU: Exynos4418 Dual Core ARM Cortex A9 1.4GHz

? Battery: 3700mA, rechargeable polymer lithium battery

? Extension memory card: 32G Micro SD (TF) card supported

? Memory capacity:1GB

? Storage capacity: 32GB

? LCD: 8.0 inch

? LCD resolution: 1280*800

? Touch screen: Capacitive touch screen

? Camera: 5 mega rear view camera

? Wi-Fi: supported

? Working temperature: -10? ~ 55?(14? ~ 131? )

? Storage temperature: -20? ~ 70?(-4? ~ 158? )

? Weight: about 1.0 Kg

? Dimension: 254mm*174*mm*35mm

I. Functional Overview:

Induction Coil is used to detect the key induction coil failure of the vehicle.

II. Application Method:

Attach the Induction Coil to the key induction coil, and insert the key or turn ignition on, while Induction Coil red indicator lights up and goes out, indicating the key induction coil is good;the indicator does not illuminate to indicate the key coil is damaged, please check and repair or replace.

I. Functional Overview:

Induction Coil is used to detect the key induction coil failure of the vehicle.

II. Application Method:

Attach the Induction Coil to the key induction coil, and insert the key or turn ignition on, while Induction Coil red indicator lights up and goes out, indicating the key induction coil is good;the indicator does not illuminate to indicate the key coil is damaged, please check and repair or replace.

Package includes:

CH002564
€2,220.66

OBDSTAR X300 DP Plus X300 PAD2 8inch Tablet (Full package) C Package

ECU Chip Tunning UPA USB V13 With Full Adaptors ECU Programmer

Description:

International Buyers ? Please Note:

a) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.

b) Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying.

Description:

New Upa-usb is the full set with all adapters.

1.The main Device can be directly connected to the Elrasoft.com UUSP (UPA-USB Serial Programmer) or by an optional DB9 male / female 1:1 extension cable.

2.It's equipped with an 40pin ZIF Socket for all narrow and wide DIP / DIL devices as well as with a 16 pin SOIC ZIF (150mil, narrow) socket to cover most commonly used devices.

Top 4 Reasons to Get the UPA USB Programmer

1. Language: English.

2. Hardware Version: V2014

3. Software Vesion: V1.3

4. Support Nec Function, but Has No NEC Adapter in the Package

UPA USB Programmer Description:

New Upa-usb is the full set with all adapters, The main Device can be directly connected to the Elrasoft.com UUSP (UPA-USB Serial Programmer) or by an optional DB9 male / female 1:1 extension cable. It's equipped with an 40pin ZIF Socket for all narrow and wide DIP / DIL devices as well as with a 16 pin SOIC ZIF (150mil, narrow) socket to cover most commonly used devices.

Device configuration is done over special config keys which make the work convenient and safe compared to wiring up all manually.

Additional packages can be covered by commonly available Adapters plugged into the 40 pin ZIF socket.

The main Device further includes a 10 pin ISP connector where the included ISP Adapters can be connected using a standard 1:1 flatribbon cable (included). The included PLCC ISP Adapters are to be put directly over the soldered chip of the target device making the work convenient and safe compared to soldering or using clips connecting up all manually. (Power from the UUSP to the ISP target can be enabled or disabled by a jumper next to the 10 pin ISP connector)

UPA-USB Device Programmer V1.3 Update Info:

Added MC9S12HY64/HA32 support

Added Serial Flash memory support: A25L512/010/020/040/080/016/032, SST25VF512A/010A/020B/040B/080B/016B/032B, S25FL004A/008A/016A/032A/064A

Added 24C1024, 24C1025 support

Added Bulk erase data memory to PICs 16F913-7/946, 12F629/675

Added script function GetPage

Added script function AutoBaudRateDevice (hc08 devices only)

Added script function GetProgrammerFrameChildCtrl( AChildCtrlName: string): TControl

Added script function EnablePicMemoryAreas ( AProgram, AID, AConfig, ACalibration, AEEPROM: boolean ): boolean;

Fixed bug with script functions ProgramDevice, ReadDevice ... when used with PICs

Fixed bug with SetHC08SecurityBytes (SecBytes: string) function

Fixed bug with 68hc11 reading if Oscillator is not set to Auto

Updated script example files

The software is digitally signed

USB driver upausb.sys is digitally signed

EEproms

Simply connect the mainboard to the UPA programmer directly or by using a DB9 male / female extension cable (1:1). Insert the correct config key into the slot of the mainboard and start programming either via the ZIF or SOIC Socket. You can also use the included DIL to 10pin Flat-ribbon header, put it inside the ZIF socket and wire up an SOIC clip or clamps for ISP use from there.

Motorola MCU's

Pick the Adapter you want to use, attach the flat cable to the Adapter (PIN1 is always indicated, on both the cable and also the Adapter) and also to the main board's 10pin ISP connector. Select the VCC supply source by the jumper on the mainboard next to the ISP connector (on = target supplied from upa, off = target got own supply). Slide the Adapter over the soldered PLCC MCU on the target PCB. (No soldering, no pinout reviewing, no pin counting, saves lots of time and hassle and let's you make your job faster, precise and easier)

Once your workshop is equipped with our Adapter Set you will have a all new UPA Experience.

STMicroelectronics ST62*:

ST6240, ST6245, ST6249

NSC CR16*: CR16HCS5(9), CR16MCS5(9), CR16MES5(9), CR16MFS5(9), CR16MCT5/9, CR16HCT5/9

Motorola HC05*: MC68HC05B6, MC68HC05B8, MC68HC05B16, MC68HC705B16, MC68HC05B32, MC68HC05E6, MC68HC705E6, MC68HC05H12, MC68HC05L28, MC68HC05P3, MC68HC705P3*, MC68HC05X16, MC68HC05X32

Motorola HC08*: MC68HC08AS20, MC68HC08AS32, MC68HC08AS60, MC68HC08AZ32, MC68HC(9)08AZ32A, MC68HC908AZ60, MC68HC908AZ60A

Motorola HC11*: MC68HC11A1, MC68HC11A8, MC68HC11E9, MC68HC11EA9, MC68HC11E20, MC68HC11F1, MC68HC11K4, MC68HC11KA2, MC68HC11KA4, MC68HC11KG4, MC68HC11KS2, MC68HC11KS8, MC68HC11L6, MC68HC11P2, MC68HC11PA8, MC68HC11PH8

Motorola HC12*: MC68HC912B32, MC68HC912BE32, MC68HC912D60, MC68HC912D60A, MC68HC912DC128A, MC68HC912DG128, MC68HC912DG128A

Motorola HCS12*: MC9S12D64, MC9S12A128, MC9S12DG128, MC9S12DG256, MC9S12H128, MC9S12H256

Atmel 8051 Architecture: AT89S51, AT89S52, AT89S53, AT89S8252, AT89S8253

Atmel AVR 8-Bit Risk: AT90S1200, AT90S2313, AT90S2323, AT90S2333, AT90S2343, AT90S4433, AT90S4434, AT90S8515, AT90S8535, ATmega8, ATmega16, ATmega161, ATmega162, ATmega163, ATmega323, ATmega64, ATmega103, ATmega128, ATtiny12, ATtiny15, ATtiny2313

Microchip PIC12: PIC12F508, PIC12F509, PIC12F629, PIC12F675

Microchip PIC16: PIC16F627(A), PIC16F628(A), PIC16F648A, PIC16F72, PIC16F73, PIC16F74, PIC16F76, PIC16F77, PIC16F818, PIC16F819, PIC16F83, PIC16F84(A), PIC16F870, PIC16F871, PIC16F872, PIC16F873(A), PIC16F874(A), PIC16F876(A), PIC16F877(A)

EEPROMs I2C: 24C01, 24C02, 24C04, 24C08, 24C16, 24C32, 24C64, 24C65, 24C128, 24C256, 24C512, 85C72, 85C82, 85C92, BAW574252, GRM-003, GRM-004, GRM-005, KKZ-06F, MCM2814, PCA8581, PCF8581, PCF8582, PCF8594, PCF8598, PCF85102, PCF85116, SDA2516, SDA2526, SDA2546, X24C00, X24C01

EEPROMs Microwire: 7002, 93C06, 93C14, 93C46, 93C56, 93C57, 93C66, 93C76, 93C86, 93S46, 93S56, 93S66, GRN-001, GRO-002, KKZ-01, S220, S2914, ST61907, XLS93C46

EEPROMs SPI: M35080, 25C010, 25C020, 25C040, 25C080, 25C128, 25C160, 25C256, 25C320, 25C640, M25P05, M25P10, M25P20, M25P40, M25P80, ST95010, ST95020, ST95040, ST95080, ST95160, ST95320, ST95640, ST95P02, ST95P04, ST95P08, X5043, X5045

EEPROMs Miscellaneous: CXK1011, CXK1012, CXK1013, M6M80011, M6M80021, M6M80041, SDE2506, TC89101, TC89102

*EEPROM Only

NEC ..uDP780828A uDP780948 uDP780949 uDP780973 uDP780974

TMS...TMS370CX02 TMS370CX32 TMS370CX36 TMS370CX42 TMS370CX56 TMS370CX56 TMS370CX56 78K0/HC912

TMS370CX58 TMS370CX58 78K0/HC912 TMS375C006

Package List:

1pcXMain unit

1pcXUSB cable

1pcXCD

1pcX5pin cable

1pcXAdapter Type1 Per eprom I2C,SPI, Microware e M35080

1pcXAdapter Type2 Motorola MC68HC11P2+MC68HC11PH8-PLCC84

1pcXAdapter Type3 Motorola MC68HC08AS-PLCC52

1pcXAdapter Type4 Motorola MC68HC11KA2/4+MC68HC11KS-PLCC68

1pcXAdapter Type5 Motorola MC68HC(9)08-QFP64

1pcXAdapter Type6 Motorola MC68HC11F1-PLCC68

1pcXAdapter Type7 Motorola MC68HC05H12-PLCC52

1pcXAdapter Type8 Motorola MC68HC11K-PLCC84

1pcXAdapter Type9 Motorola MC68HC11A8/E1/E9/E20+MC68HC11EA9-PLCC52

1pcXAdapter Type10 Motorola MC68HC11KA2/4+MC68HC11PA8-QFP64

1pcXAdapter Type11 Motorola MC68HC11K-QFP80

1pcXAdapter Type12 Extended address

1pcXAdapter Type13 Motorola MC68HC11A8/E1/E9/E20-QFP64

1pcXAdapter Type14 Motorola MC68HC05B4/B6/B8/B16/B32+MC68HC705B16/B32-PLCC52

1pcXAdapter Type15 Motorola MC68HC(7)05E6-SOIC28

1pcXAdapter Type16 Motorola MC68HC05B4/B6/B8/B16/B32+MC68HC(7)05X16/X32-QFP64

1pcXAdapter Type17 Motorola MC68HC(9)12B32-MC68HC(9)12D60(A)-QFP80

1pcXAdapter Type18 Motorola MC68HC11F1-QFP80

1pcXAdapter Type19 Motorola MC68HC11L6-PLCC68

CH002601
€60.92

ECU Chip Tunning UPA USB V1.3 With Full Adaptors ECU Programmer

Complete TSOP56 adapter set IC socket only for TNM5000 Programmer Model 556T2

TNM5000 TSOP56 adapter Device support list

TSOP56 adapter Device support list

Login to Download: * items list Download

lease note: This adapter set is only for TNM5000 Programmer. Other programmers cannot use it!

Description:

This adapter set can be used for TSOP56 package chips. For All 56 Pins TSOP Type-1 (20mm Pin-Pin Lenght) , You Need Only one adaptor Model 556T2 , with different sets of bottom plates which can be easily exchanged by user.

The set comes with 1 TSOP56 ZIF board and 4 base boards, just like the pictures show.

Package include:

1pcs TNM TSOP56 ZIF Socket top board (made in Japan)

1pcs TNM TSOP561 bottom board

1pcs TNM TSOP562 bottom board

1pcs TNM TSOP563 base board

1pcs TNM TSOP564 base board

CH002442
€69.00

Complete TSOP56 adapter set IC socket only for TNM5000 Programmer Model 556T2

TNM5000 USB fast ISP EEPROM universal Programmer TSOP48 TSOP56 adapter set IC socket

TNM5000 Universal Programmer Introduction

Login to Download: * Programmer latest Software

User Manual Device List Nand Software Utility Software for RS232 & USB Bl a ster Emulation

? 23000 Supported Devices Flash Memory (Parallel / Nand /Serial) , EPROM , EEPROM , Serial EEPROM , Microcontroller , NVRAM , FRAM , CPLD , PLD , FPGA).

? 48-Pins ZIF Socket with Pin Continuity tester & 10-Pins ISP/JTAG Connector.

? USB 2.0 High Speed ,Program 1 Gbit Nand Flash less than 50 sec , Reading Serial Flash memory with 6 Mbit/Sec Speed.

? Auto detection of all flash Memories/Microcontrollers with Device ID.

? User friendly software for Windows XP/VISTA/7/8 (32,64 bits).

? Multiple Programming is possible by attaching 2 or more Programmers to one PC.

? Very low cost Main Unit & Low cost adaptors.

? Special Abilities like, Altera US,B-B.l*a*s.ter Emulation for Quartus Software, Serial Port Emulation , Vehicle ECU , Immoblizer & Dashboard microcontroller Support.

Parallel Flash Memories: up to 56 pins parallel flash memories are supported by TNM5000. it Supports different kind of packages (PLCC , TSOP1 , TSOP2 ,VSOP & ...).

All Flashes can be automatically detected by software in case of unreadable device names. By using a single adaptor for all 32-48 pins TSOP flashes , user only need 1 adaptor for over 2000 flash chips.

Nand Flash Memories: TNM5000 has an additional Nand+ software , specially designed for Nand flash memories. Nand+ Software has one of the most complete list of Nand flash Memories with algorithms for correction of bad data in MLC Nand Flashes. TNM5000 is one of the fastest Nand Programmers in the world with Read & Write Speed up to 8 MegaByte per Second. All Nand Flashes can be automatically detected by software in case of unreadable or remarked device names.

Serial Flash Memories: All 8-16 Pins Serial SPI flash memories are supported by TNM5000. All SPI flash Memories can be detected automatically by software in case of unreadable device names. It reads & programs SPi flashes with maximum safe speed on ZIF (6-7 Mbit/second) . Also it Unprotects the write protected flashes before writing data to it.

Microcontrollers:

ATMEL: All AVR 8 bits chips (ATMEGA/ATTINY/AT90S) are supported on ZIF Scocket & by ISP cable. High Voltage Parallel on ZIF Programming of AVR up to 64 pins is supported. newly introduced ATXMEGA Series are supported by both PDI & JTAG Method. Old C51 series & new single cycle C51 series are completely supported. All the above series can be detected automatically by TNM5000. ARM7 programming by JTAG is supported.

Microchip: One of the most complete device list for microchip PIC microcontrollers including all PIC12F /PIC12C /PIC16C / PIC16F / PIC18F / DPIC33F / J & K Series. Devices up to 40 Pins can be programmed on ZIF , All PICs can be detected automatically & programmed by ISP cable.

Others: ST, SST, Philips (NXP) , Motorola , Syncmos, Silicon Lab , ICSI , Infineon , Intel , Winbond & ...

Automotive MCUS: Supporting of ST10F & TMS370 Series by ISP cable for many BOSCH/VALEO/SAGEM ECUs (complete ST10F support of XPROG-m programmer device list). supporting of siemense & infineon SAK-C167 connected to 44 or 48 pins flash (Siemense/BOSCH/SAGEM S2000 ECU) like HSE FlasHit Programmer. Supporting NEC & Motorola Devices for Dashboards.

PLD/CPLD/FPGA: Supporting All ALTERA JTAG Devices by emulation of USB B l a s t e r Programmer in Quartus Software. Supporting of Xilinx CPLD/FPGA with jed file. Fast Xilinx FPGA configuration with bit file. Supporting of GAL/PALCE Devices with special option for PALCE unlocking.

Software: With multiple language support (English / Chinese / Russian /polska /Arabic / French /FARSI). More languages & Devices can be added by customer request. You Can Download Software & run it in Demo mode to evaluate it.

Package List:

1 x TNM5000 Programmer

1 x TSOP56 adapter set IC socket (5PCS)

1 x TSOP48 adapter set IC socket

1 x usb cable

1 x software CD

CH002464
€439.01

TNM5000 USB fast ISP EEPROM universal Programmer + TSOP48 TSOP56 adapter set IC socket

TL866II PLUS Programmer EEPROM Support NAND Flash AVR MCU GAL PIC SPI 27 Universal Adapter BGA48 BGA63

TL866II PLUS Programmer can use for items list:

Login to Download: Download software Device Support List instruction manual

Programmer Overview

1.1 Performance Introduction

Carefully built low-cost professional programmer, high-density chip production process, a

unified user interface, easy to use, functional integrity, application software, reliable

operation, code small, faster execution. supported operating system:

WINXP WIN2003 WIN2008 VISTA WIN7 WIN8 WIN10 32-bit or 64-bit operating system

? The programming speed is greatly improved. It is suitable for small batch production and supports 4 programmers for one computer.

? A wide range of chip support, the initial version supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test, 54/74 and CMOS4000 integrated circuit integrated functional test.

Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits.

25 series Nor Flash capacity support to 512Mbits.

? Pin contact check function, poor contact pin can pinpoint

? Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming

without external power integrated programmer. Portable performance super: the world's smallest volume, size 10CM * 6CM * 2.5CM, only the size of the driver's license.

? Programmable VCC from 1.8V to 6.5V, VPP from 1.8V to 18V chip

? Chip serial number secondary development functions: Programmer built a variety of commonly used automatic numbering function. And can use a custom algorithm to achieve any sequence number through DLL dynamic library. This feature allows you to produce

a unique identification info rmation for each chip in mass production. The logo can also be encrypted with a custom algorithm to more effectively protect your product's rights.

? Universal serial programming interface ICSP (to support both high-voltage parallel programming and low-volt age serial programming). Note: ICSP now supports 24-Series 25 Series 93 Series Serial Integrated Circuits, ATMEL89S51,52, AVR ATMEGAxxx Full

Series, and MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx Full Series, and the new series of SYNCMOS SM59Dxx SM59Rxx fu ll range chips for in-circuit serial programming.

? Powerful 54 / 74F / LS / HC CMOS4000 Series Integrated Functionality Tests: The First Development Programmer to Test Common Logic ICs True, Test Errors Locating Logic Gate Circuits, Test Arbitrary Possible input combinations.

1.2 Programmer chip support range

? Variety of 26 27 28 29 37 39 49 50 series of parallel ROM, EPROM, EEPROM

Fast, full support. Support TSOP32 TSOP40 TSOP48 chips to 64MBits, will join the TSOP56 pin support.

(TL866II programming voltage VPP only supports up to 18V, for early 27C series ROM, the

chip with 21V 25V VPP voltage no longer supports writing, but can be read. If it is used,

the VPP with the same type of programming voltage can be used as 13V or 12V chip replacement, for example: 27C32 21V or 13V Vpp chip,Pay attention to the VPP voltage)

? 24 25 35 45 85 93 95 Series Serial EEPROM

Serial Series Chip Support Full, Supports Chip Capacity 25 Series 8 or 16PIN to 512MBits (64M Bytes)

? NAND FLASH chip supports up to 8Gbits

? MCU series, hundreds of models of 51 series of microcomputer

? AVR microcontroller package scratch ATMEGA series ATtiny series AT90XXX series of microcontrollers, all AVR ATMEGAxxx chip also supports the ICSP interface for SPI serial download programming. Support AVR one-to-one soft-key with RC correction byte.

? MICROCHIP PIC10 PIC12 PIC16 PIC18 Series Microcontroller:

PIC series of more than 300 models, more than 900 package chip support, currently supports

one of the most complete PIC chip integrated programmer. For vario

us types of PIC monolithic, in strict accordance with the manufacturer's manual requirements, the optimal programming, programming speed is excellent. The vast majority of chips support both ISCP online programming and programming through programming sockets.

? GAL programmable logic device programming

? SRAM test

Support for common 24 61 62 DS12 series SRAM test, respectively, to data line testing,

address line testing, memory unit incremental testing and unit testing.

? Super performance 54 / 74F / LS / HC CMO

S4000 series integrated circuit integrated

Function test:

The first development-type programmer to really test common logic ICs to test for errors

that can be located to logic gates, and to test any possible combinations of inputs in an integrated circuit when testing.

Package In clude:

a. TL866CS programador con el paquete 1 pcs

b. Connect the USB cable 1 pcs

c. Softerware CD 1 pcs

27 Universal Adapter Package Contents

1. SOP44/PSOP44 Adpater 1 pcs

2. TSOP32/40/48 placa base 1 pcs

3. SOP56-DIP48 adpater 1 pcs

4. TSOP32/40/48 tablero superior de soldadura 1 pcs

5. TSOP48 adaptador 2in 1 base 1 pcs

6. TSOP40 (A) Bit placa Base 1 pcs

7. TSOP40 (B) 16bit placa base 1 pcs

8. TSOP32/40/48 tablero superior de soldadura 1 pcs

9. BGA48 adpater 1 pcs

10.SOP28-DIP28 300mil Adaptador 1 pcs

11. SOP20-DIP20 Adaptador 200-208mil 1 pcs

12. Adaptador 150mil SOP16-DIP16 1 pcs

13. SOP8-DIP8 200-208mil adpater 1 pcs

14. SOP8-DIP8 150mil adpater 1 pcs

15. BGA63 adpater 1 pcs

16. PLCC44-DIP40 1 pcs

17. PLCC32-DIP32 1 pcs

18. PLCC28-DIP24 1 pcs

19. PLCC20-DIP20 1 pcs

20. SOP8/MSOP8/SSOP8/SOP16-DIP16 simple adaptador 1 pcs

21. SOP16/SOP14/SOP8-DIP8 adpater

22. Adaptador SOP8-DIP8 simples 1 pcs

23. TSOP32/40/48-DIP40 NAND adpater

24. 1.8 V Adpater 1 pcs

25. TSSOP28 Adpater 1 pcs

26. SOIC8 SOP8 IC Flash clip 1 pcs

27. PLCC IC Extractor 1 pcs

CH002518
€206.37

TL866II PLUS Programmer EEPROM Support NAND Flash AVR MCU GAL PIC SPI 27 Universal Adapter BGA48 BGA63

RT80x80E IT8386E Transfer Board

RT809H PEB-1 Extension Board IT8985E IT8595E IT8587E IT8586E IT8585E IT8580E IT8386E Transfer Board

CH002545
€2.70

RT809H PEB-1 Extension Board IT8985E IT8595E IT8587E IT8586E IT8585E IT8580E IT8386E Transfer Board

OBDSTAR X300 DP Plus X300 PAD2 8inch Tablet Full package C Package

OBDSTAR X300 Key Master DP Plus Diagnosis and Auto key programmer

CONFIGURATIONS

A Package:

Immobilizer+Special function(EEPROM+Key Renewing)Adapter(P001 programmer+C001circuit board+C002 circuit board+W001 cable+W002 data cable+W003 data cable+Toyota smart key Emulator)+others(Ignition coil+Remote tester)

B Package (Calibration with instrument mileage):

Immobilizer+Special function(EEPROM+Key Renewing)+Mileage correction+Adapter(P001 programmer+C001 circuit board+C002 circuit board+W001 data cable+W002 data cable+W003 data cable+Toyota smarkt key Emulator)+others(Ignition coil+Remote tester)

C Package (With meter mileage correction + maintenance to match special functions):

Immobilizer+Mileage correction+Diagnosis+Special function (Oil rest +ABS+Battery matching+ECU programming+EPB+Throttle programming+Airbag rest+TPMS+Steering angle rest+OBDII+DPF+Injector code+Supension matching+Gear learning+CVT learning+EEPROM+Key renewing+ECU cloning)Adapter(P001 programmer+C001 circuit board+C002 circuit board+W001 data cable+W002 data cable+W003 data cable+Toyota smarkt key Emulator)+others(Ignition coil+Remote tester)

This device is a new Android-based vehicle trouble diagnostic device developed for internet applications. It inherits from OBDSTAR advanced diagnosing technology and it is characterized by covering wide range of vehicles, featuring powerful function, and providing precise result. Through vehicle diagnostic OBD connector and variant mobile intelligent terminals, it achieves vehicle trouble diagnosis for full car model and full system vehicle.

Meanwhile, taking advantage of mobile internet, this device integrates more application and service, such as Maintenance Database, remote assistant, One Key Upgrade etc.

OBDSTAR X300 DP Plus X300 PAD2 8inch Tablet (Full package) C Package

OBDSTAR X300 Key Master DP Plus Hardware Advantages:

1. Built-in VCI box

2. 8-inch touchscreen

3. Charge directly via OBD interface

4. Practical and high-end gift box

5. Industrial design with silicone case

6. Back bracket design:prop on the steering wheel or stand on the table

7. With 4 Toyota simulation keys (the fifth is coming soon)

8. P001 programmer: EEPROM adapter + RFID adapter + Key Renew adapter

9. Add the clip of reading SOP 8PIN EEPROM

10. C001/C002 circuit board to read and write chip data with welding

11. IMMO induction coil to detect the key induction coil failure of the vehicle.

12. Add wiring harness of ECU reading by OBD (for ECU cloning and switch activation)

OBDSTAR X300 Key Master DP Plus Software Advantages:

IMMO:

1. EEPROM

2. Renew Key

3. Key programming

4. Remote programming

Cluster Calibrate: wild vehicle coverage, pls check the carlist

Diagnosis: realize all vehicle systems diagnosis

Special Functions

TPS/ABS/EPB/DPF/TPMS/SRS Reset/Fuel Injector/Gear Learning/Battery Matching/ECU Programming/Throttle Matching/

Oil/service reset/Steering Angle Reset/Remote Manual Setting/Electronic Steering Reset/CVT Learning/value Reset

ECU Clone

1. ECU Clone, means ECU duplication.

The device copies all the data from the original vehicle ECU, and then writes all data copied into ECU with the same hardware to realize the same ECU function with the original vehicle.

2. Clone directly when replacing a new or a used ECU!

Without online matching in 4S store or removal of ECU bonding wire for reading and writing! Directly write without dismantling OBD!

3. Three features for ECU Clone:

A. Free of 4S online:

break monopoly from 4S, benefiting automobile maintenance industry

B. Simplified operation procedures: realize foolproof operation

C. Non-dismantling with zero risks: read and write data without dismantling ECU

Switch Activation Function

(Today many instruments or audio of vehicles activate secondary power supply to go into power-on status by relevant module CAN communication on the vehicle, but sometimes an instrument or an audio is separated from vehicle CANBUS network, causing startup failure when it needs to be repaired by an auto technician. This function can simulate CAN communication to activate secondary power supply, so the instrument or the audio enters into power-on status. In this way, it not only can test and verify the instrument or the audio, but also save an enormous cost for an auto technician to purchase a large number of startup platforms of various vehicles and wiring harnesses!)

Add Help Functions

1. including built-in testable vehicle models, upgrade announcement, features, help notes and wiring diagrams, etc.

2. Carlist and upgrade announcement, all details are available on the device

3. Customers can look up the features or uniquely support functions on the device

4. Help notes: built-in help notes for each model or function

5. Wiring diagrams: built-in ECU wiring diagrams, more intuitionistic and convenient

TECHNICAL PARAMETER

? Operation system: Android 5.1.1

? CPU: Exynos4418 Dual Core ARM Cortex A9 1.4GHz

? Battery: 3700mA, rechargeable polymer lithium battery

? Extension memory card: 32G Micro SD (TF) card supported

? Memory capacity:1GB

? Storage capacity: 32GB

? LCD: 8.0 inch

? LCD resolution: 1280*800

? Touch screen: Capacitive touch screen

? Camera: 5 mega rear view camera

? Wi-Fi: supported

? Working temperature: -10? ~ 55?(14? ~ 131? )

? Storage temperature: -20? ~ 70?(-4? ~ 158? )

? Weight: about 1.0 Kg

? Dimension: 254mm*174*mm*35mm

I. Functional Overview:

Induction Coil is used to detect the key induction coil failure of the vehicle.

II. Application Method:

Attach the Induction Coil to the key induction coil, and insert the key or turn ignition on, while Induction Coil red indicator lights up and goes out, indicating the key induction coil is good;the indicator does not illuminate to indicate the key coil is damaged, please check and repair or replace.

I. Functional Overview:

Induction Coil is used to detect the key induction coil failure of the vehicle.

II. Application Method:

Attach the Induction Coil to the key induction coil, and insert the key or turn ignition on, while Induction Coil red indicator lights up and goes out, indicating the key induction coil is good;the indicator does not illuminate to indicate the key coil is damaged, please check and repair or replace.

Package includes:

CH002564
€2,220.66

OBDSTAR X300 DP Plus X300 PAD2 8inch Tablet (Full package) C Package

ECU Chip Tunning UPA USB V13 With Full Adaptors ECU Programmer

Description:

International Buyers ? Please Note:

a) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.

b) Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying.

Description:

New Upa-usb is the full set with all adapters.

1.The main Device can be directly connected to the Elrasoft.com UUSP (UPA-USB Serial Programmer) or by an optional DB9 male / female 1:1 extension cable.

2.It's equipped with an 40pin ZIF Socket for all narrow and wide DIP / DIL devices as well as with a 16 pin SOIC ZIF (150mil, narrow) socket to cover most commonly used devices.

Top 4 Reasons to Get the UPA USB Programmer

1. Language: English.

2. Hardware Version: V2014

3. Software Vesion: V1.3

4. Support Nec Function, but Has No NEC Adapter in the Package

UPA USB Programmer Description:

New Upa-usb is the full set with all adapters, The main Device can be directly connected to the Elrasoft.com UUSP (UPA-USB Serial Programmer) or by an optional DB9 male / female 1:1 extension cable. It's equipped with an 40pin ZIF Socket for all narrow and wide DIP / DIL devices as well as with a 16 pin SOIC ZIF (150mil, narrow) socket to cover most commonly used devices.

Device configuration is done over special config keys which make the work convenient and safe compared to wiring up all manually.

Additional packages can be covered by commonly available Adapters plugged into the 40 pin ZIF socket.

The main Device further includes a 10 pin ISP connector where the included ISP Adapters can be connected using a standard 1:1 flatribbon cable (included). The included PLCC ISP Adapters are to be put directly over the soldered chip of the target device making the work convenient and safe compared to soldering or using clips connecting up all manually. (Power from the UUSP to the ISP target can be enabled or disabled by a jumper next to the 10 pin ISP connector)

UPA-USB Device Programmer V1.3 Update Info:

Added MC9S12HY64/HA32 support

Added Serial Flash memory support: A25L512/010/020/040/080/016/032, SST25VF512A/010A/020B/040B/080B/016B/032B, S25FL004A/008A/016A/032A/064A

Added 24C1024, 24C1025 support

Added Bulk erase data memory to PICs 16F913-7/946, 12F629/675

Added script function GetPage

Added script function AutoBaudRateDevice (hc08 devices only)

Added script function GetProgrammerFrameChildCtrl( AChildCtrlName: string): TControl

Added script function EnablePicMemoryAreas ( AProgram, AID, AConfig, ACalibration, AEEPROM: boolean ): boolean;

Fixed bug with script functions ProgramDevice, ReadDevice ... when used with PICs

Fixed bug with SetHC08SecurityBytes (SecBytes: string) function

Fixed bug with 68hc11 reading if Oscillator is not set to Auto

Updated script example files

The software is digitally signed

USB driver upausb.sys is digitally signed

EEproms

Simply connect the mainboard to the UPA programmer directly or by using a DB9 male / female extension cable (1:1). Insert the correct config key into the slot of the mainboard and start programming either via the ZIF or SOIC Socket. You can also use the included DIL to 10pin Flat-ribbon header, put it inside the ZIF socket and wire up an SOIC clip or clamps for ISP use from there.

Motorola MCU's

Pick the Adapter you want to use, attach the flat cable to the Adapter (PIN1 is always indicated, on both the cable and also the Adapter) and also to the main board's 10pin ISP connector. Select the VCC supply source by the jumper on the mainboard next to the ISP connector (on = target supplied from upa, off = target got own supply). Slide the Adapter over the soldered PLCC MCU on the target PCB. (No soldering, no pinout reviewing, no pin counting, saves lots of time and hassle and let's you make your job faster, precise and easier)

Once your workshop is equipped with our Adapter Set you will have a all new UPA Experience.

STMicroelectronics ST62*:

ST6240, ST6245, ST6249

NSC CR16*: CR16HCS5(9), CR16MCS5(9), CR16MES5(9), CR16MFS5(9), CR16MCT5/9, CR16HCT5/9

Motorola HC05*: MC68HC05B6, MC68HC05B8, MC68HC05B16, MC68HC705B16, MC68HC05B32, MC68HC05E6, MC68HC705E6, MC68HC05H12, MC68HC05L28, MC68HC05P3, MC68HC705P3*, MC68HC05X16, MC68HC05X32

Motorola HC08*: MC68HC08AS20, MC68HC08AS32, MC68HC08AS60, MC68HC08AZ32, MC68HC(9)08AZ32A, MC68HC908AZ60, MC68HC908AZ60A

Motorola HC11*: MC68HC11A1, MC68HC11A8, MC68HC11E9, MC68HC11EA9, MC68HC11E20, MC68HC11F1, MC68HC11K4, MC68HC11KA2, MC68HC11KA4, MC68HC11KG4, MC68HC11KS2, MC68HC11KS8, MC68HC11L6, MC68HC11P2, MC68HC11PA8, MC68HC11PH8

Motorola HC12*: MC68HC912B32, MC68HC912BE32, MC68HC912D60, MC68HC912D60A, MC68HC912DC128A, MC68HC912DG128, MC68HC912DG128A

Motorola HCS12*: MC9S12D64, MC9S12A128, MC9S12DG128, MC9S12DG256, MC9S12H128, MC9S12H256

Atmel 8051 Architecture: AT89S51, AT89S52, AT89S53, AT89S8252, AT89S8253

Atmel AVR 8-Bit Risk: AT90S1200, AT90S2313, AT90S2323, AT90S2333, AT90S2343, AT90S4433, AT90S4434, AT90S8515, AT90S8535, ATmega8, ATmega16, ATmega161, ATmega162, ATmega163, ATmega323, ATmega64, ATmega103, ATmega128, ATtiny12, ATtiny15, ATtiny2313

Microchip PIC12: PIC12F508, PIC12F509, PIC12F629, PIC12F675

Microchip PIC16: PIC16F627(A), PIC16F628(A), PIC16F648A, PIC16F72, PIC16F73, PIC16F74, PIC16F76, PIC16F77, PIC16F818, PIC16F819, PIC16F83, PIC16F84(A), PIC16F870, PIC16F871, PIC16F872, PIC16F873(A), PIC16F874(A), PIC16F876(A), PIC16F877(A)

EEPROMs I2C: 24C01, 24C02, 24C04, 24C08, 24C16, 24C32, 24C64, 24C65, 24C128, 24C256, 24C512, 85C72, 85C82, 85C92, BAW574252, GRM-003, GRM-004, GRM-005, KKZ-06F, MCM2814, PCA8581, PCF8581, PCF8582, PCF8594, PCF8598, PCF85102, PCF85116, SDA2516, SDA2526, SDA2546, X24C00, X24C01

EEPROMs Microwire: 7002, 93C06, 93C14, 93C46, 93C56, 93C57, 93C66, 93C76, 93C86, 93S46, 93S56, 93S66, GRN-001, GRO-002, KKZ-01, S220, S2914, ST61907, XLS93C46

EEPROMs SPI: M35080, 25C010, 25C020, 25C040, 25C080, 25C128, 25C160, 25C256, 25C320, 25C640, M25P05, M25P10, M25P20, M25P40, M25P80, ST95010, ST95020, ST95040, ST95080, ST95160, ST95320, ST95640, ST95P02, ST95P04, ST95P08, X5043, X5045

EEPROMs Miscellaneous: CXK1011, CXK1012, CXK1013, M6M80011, M6M80021, M6M80041, SDE2506, TC89101, TC89102

*EEPROM Only

NEC ..uDP780828A uDP780948 uDP780949 uDP780973 uDP780974

TMS...TMS370CX02 TMS370CX32 TMS370CX36 TMS370CX42 TMS370CX56 TMS370CX56 TMS370CX56 78K0/HC912

TMS370CX58 TMS370CX58 78K0/HC912 TMS375C006

Package List:

1pcXMain unit

1pcXUSB cable

1pcXCD

1pcX5pin cable

1pcXAdapter Type1 Per eprom I2C,SPI, Microware e M35080

1pcXAdapter Type2 Motorola MC68HC11P2+MC68HC11PH8-PLCC84

1pcXAdapter Type3 Motorola MC68HC08AS-PLCC52

1pcXAdapter Type4 Motorola MC68HC11KA2/4+MC68HC11KS-PLCC68

1pcXAdapter Type5 Motorola MC68HC(9)08-QFP64

1pcXAdapter Type6 Motorola MC68HC11F1-PLCC68

1pcXAdapter Type7 Motorola MC68HC05H12-PLCC52

1pcXAdapter Type8 Motorola MC68HC11K-PLCC84

1pcXAdapter Type9 Motorola MC68HC11A8/E1/E9/E20+MC68HC11EA9-PLCC52

1pcXAdapter Type10 Motorola MC68HC11KA2/4+MC68HC11PA8-QFP64

1pcXAdapter Type11 Motorola MC68HC11K-QFP80

1pcXAdapter Type12 Extended address

1pcXAdapter Type13 Motorola MC68HC11A8/E1/E9/E20-QFP64

1pcXAdapter Type14 Motorola MC68HC05B4/B6/B8/B16/B32+MC68HC705B16/B32-PLCC52

1pcXAdapter Type15 Motorola MC68HC(7)05E6-SOIC28

1pcXAdapter Type16 Motorola MC68HC05B4/B6/B8/B16/B32+MC68HC(7)05X16/X32-QFP64

1pcXAdapter Type17 Motorola MC68HC(9)12B32-MC68HC(9)12D60(A)-QFP80

1pcXAdapter Type18 Motorola MC68HC11F1-QFP80

1pcXAdapter Type19 Motorola MC68HC11L6-PLCC68

CH002601
€60.92

ECU Chip Tunning UPA USB V1.3 With Full Adaptors ECU Programmer