Login to Download: »» Download Renesas emulator software «

Product Description

EZ-CUBE chip debugging emulator

EZ-CUBE is the chip debugging emulator, with flash memory programming function. Can be used for debugging programs or burn the program into theinternal flash micro controller.

- chip debugging

To debug is connected to the microcontroller target board.

- flash programmer

The program can be written to the built-in flash memory controller.

USB connection

Connecting to host through USB port 2.

The use of USB power supply operation. No additional power supply.

Supports a large number of products

EZ-CUBE can support Renesas Electronics 8 bit to 32 bit internal flash microcontroller.

78K0 micro controller

78K0R micro controller

RL78 micro controller

R8C micro controller

V850 micro controller

Use Tutorials Video: * Check

The disadvantage of this test indicates that some models cannot be tested when the resolution of this tester is above 3K. Ltn133yl02 / 03 / 04 / 05 / 06 can not be tested normally, so only self-test line can be used. Other LCDs with resolution above 3K do not promise to test normally. The resolution below 3K is no problem.

1. This EDP tester has intelligent screen parameter configuration function, 6-bit screen uses 01, 8-bit screen uses 02. In general, the screen with 1920 * 1080 resolution and above uses 02, and the screen with 1920 * 1080 resolution and below uses 01. When you don't know the resolution, you can try 02 first. In all EDP screens, about 10% of the screens can not match the intelligent screen parameters, so it is necessary to use the accurate screen parameter number.

2. For the configuration of accurate screen reference number, first search the LCD screen model to be tested in Baidu to determine the screen type and resolution. Then query the corresponding number. Each resolution is divided into 6-digit and 8-digit, with a total of 6 numbers. It is generally recommended to use 8-digit screen reference number first.

3 EDP screen is usually 30 pins with 0.5 spacing. The standard line of the screen tester can measure 80% EDP screen with 1920 * 1080 resolution and below, which is different from LVDS screen. The screen with 2K resolution or above and the screen line with standard configuration can not be tested normally needs to be made by hand, and the LCD screen needs to be provided at the same time. Generally, it is connected to ports a, C and D of the tester. When the screen is bright, but the screen is flashing or black, port B, C and D are used. If some manual lines do not have port C, only port B and D are needed. The standard line of EDP screen whose screen model starts with vvx can't be applied, so it must be done manually again. Au screen containing b116htn, b133htn, b140htn and b156htn can be normally displayed with B, C and D. Qimei's n133hse-ea3 / EB3 can be displayed normally only with B, C and D.

4. If a, C, D or B, C, D glass signal image display is normal but the backlight is not bright, it means that the screen does not have its own backlight boost module, and it needs to do the screen connecting line and external constant current board manually.

QFN8-DIP8 Programador Adaptador WSON8-DIP8 8x6mm 6x5mm for RT809H RT809F TL866II TL866A TL866CS TNM5000 XELTEK

ZOTEK ZT203 6000 Counts Pen-type Digital Multimeter True RMS Auto Range DC/AC Voltage Meter Voltmeter with Backlight

Description:

This is battery-powered, true RMS, auto-ranging, pen-type digital multimeter with 6000

counts backlight LCD display.

Five functional buttons instead of the traditional rotary switch enable one-hand operation.

This product is made of high quality material and durable, which can prevent breakage.

Features:

5 functional buttons: instead of the traditional rotary switch, 5 buttons can make you

measurements more convenient and efficient.

True RMS: The RMS/DC transform avoids the influence of voltage waveform distortion can test high accuracy.

LCD Display: 6000 counts digital LCD display offers large test rang as well as clear readings.

7 Test Modes: used to test DC & AC voltage, capacitance, resistance, frequency, continuity,

diode and NCV.

Humanized Design: it comes with auto power off, data hold, auto/manual range.

Specifications:

Material: Plastic

Display: LCD display with backlight

DC Voltage Range: 60mV/600mV/6V/60V/600V/1000V

AC Voltage Range: 60mV/600mV/6V/60V/600V/750V

Resistance Range: 600O/6kO/60kO/600kO/6MO/60MO

Capacitance Range: 9.999nF/99.99nF/999.9nF/9.999F/99.99F/999.9F/9.999mF

Frequency: 99.99Hz/999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999MHz

Diode: yes

Continuity: yes

NVC: yes

Maximum display: 6000

Automatic range/manual range: yes

True effective value: yes

Data retention: yes

Flashlight: yes

Low battery tip: yes

Automatic shutdown: yes

Relative value measurement: yes

Supply power: 2 x 1.5V AAA batteries (not included)

Item dimension:

Item Size: 20.2cm x 5.1cm x 3.4cm/7.6 x 2 x 1.3in

Item Weight: 114g/4oz

Package information:

Package Size: 23.2* 9 * 5.5cm / 9.1 * 3.5 * 2.7in

Package Weight: 267g/9.4oz

Gift box package

Package List:

1 x Digital Multimeter

1 x Pair of Test Leads

1 x Black soft case

1 x User Manual(English)

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

TV160 LVDS FPC Conversion Link Board for LG CHIMEI Samsung HDTV

TV160 LVDS Conversion Link Board for 7th 4K 51Pin

GX2020 Adapter for XELTEK SuperPro 7500

KWS-1705A USB Multifunction Tester

Lattice USB download line FPGA CPLD ISP download simulation HW-USBN-2A

Login to Download: Download software

Features:

1. Using Lattice original design, to ensure the use of stable and reliable;

2. Support wide target voltage 1.2V- 5V;

3.USB power supply, no external power supply alone;

4. Supports all LATTICE development environments (LSC ISPVM, LATTICE DEMIOND, LATTICE ISPEVER, and LATTICE PROGRAMMER);

Supports a full range of Lattice FPGAs such as SC (M) / XP / XP2 / ECP2 (M) / ECP3 / ECP5 (G) / MachXO / MachXO2 / MachXO3 / ICE40 series;

6. Support Lattice full range of CPLDs, such as 1000/2000/4000 / ispMACH series;

7. Support JTAG, internal FLASH, SPI FLASH programming mode;

8. No need to install a separate driver, direct support for Diamond / ispLever6.x / 7.x / classic / ispVM various versions of drivers;

9. Has a current-limit input, ESD protection measures to ensure that the download line is complete;

10. Using Lattice official 2 * 5Pin pitch 2.54mm JTAG interface;

11. Support operating system Win2000 / XP, Windows7 / 8/10, Linux and so on

Download Wire Pin Description:

1.SCLK / TCK: connect with chip's SCLK / TCK pin;

2.GND: Downloader and the target board of the public, its internal 2,4-pin connection, in use, need to be a 2,4 feet connected to the target board;

3.MODE / TMS: with the chip's MODE / TMS pin connection;

4.GND: Downloader and the target board of the public, the internal 2,4-pin connection, in the need to use these two in a 2,4 feet connected to the target board;

5. SDI / TDI: SDI / TDI pin connection with the chip;

6.VCC: Used to detect whether the target board connected to the downloader is powered on or not used to power the target board. The official downloader does not have the ability to supply power to the target board. This needs attention;

7.SDO / TDO: SDO / TDO pin connection with the chip;

8.INTI: need to connect INTI pins when downloading and debugging some chips, not every chip needs to be connected;

9.TRST: In some chip download debugging need to connect TRST pin, not every chip needs to connect;

10.ispEN / Enable / PROG: It is necessary to connect the ispEN / Enable / PROG pins when downloading and debugging some chips, and not every chip needs to be connected.

Shipping list:

1.Lattice USB download cable (1)

2.USB 2.0 data cable (1)

3.10P 2.54MM spacing of the cable (1)

4.10P high-quality lattice special fly line (1)

5.2.54mm pitch 2X5 turn 8P standard definition line (1)

Limit frame specification: 9.0*11.0mm

More Similar Products

1 Pair 1000V 20A Universal Digital Multimeter Meter Probe Test Leads 3mm Pin Red + Black

Features :

100% brand new and high quality.

The anterior gold-plated design, in the test, the sensitivity of pens and higher and more accurate.

22mm Plug Insertion Depth.

Up to 20A / 1000V

Material: PVC and Alloy

Color: Black + Red

Package includeds :

1 x Pair of Digital Multimeter Meter Probe