48 pin Lock clasp Programmer for RT809H TNM5000 XELTEK 610P 611S 6100N BeeProg2

Texas MSP430 USB-Debug-Interface MSP-FET430UIF

DX1045-1 Adapter for XELTEK SuperPro 6100N

TNM5000 Universal Programmer Introduction

Login to Download: * Programmer latest Software

User Manual Device List Nand Software Utility Software for RS232 & USB Bl a ster Emulation

? 23000 Supported Devices Flash Memory (Parallel / Nand /Serial) , EPROM , EEPROM , Serial EEPROM , Microcontroller , NVRAM , FRAM , CPLD , PLD , FPGA).

? 48-Pins ZIF Socket with Pin Continuity tester & 10-Pins ISP/JTAG Connector.

? USB 2.0 High Speed ,Program 1 Gbit Nand Flash less than 50 sec , Reading Serial Flash memory with 6 Mbit/Sec Speed.

? Auto detection of all flash Memories/Microcontrollers with Device ID.

? User friendly software for Windows XP/VISTA/7/8 (32,64 bits).

? Multiple Programming is possible by attaching 2 or more Programmers to one PC.

? Very low cost Main Unit & Low cost adaptors.

? Special Abilities like, Altera US,B-B.l*a*s.ter Emulation for Quartus Software, Serial Port Emulation , Vehicle ECU , Immoblizer & Dashboard microcontroller Support.

Parallel Flash Memories: up to 56 pins parallel flash memories are supported by TNM5000. it Supports different kind of packages (PLCC , TSOP1 , TSOP2 ,VSOP & ...).

All Flashes can be automatically detected by software in case of unreadable device names. By using a single adaptor for all 32-48 pins TSOP flashes , user only need 1 adaptor for over 2000 flash chips.

Nand Flash Memories: TNM5000 has an additional Nand+ software , specially designed for Nand flash memories. Nand+ Software has one of the most complete list of Nand flash Memories with algorithms for correction of bad data in MLC Nand Flashes. TNM5000 is one of the fastest Nand Programmers in the world with Read & Write Speed up to 8 MegaByte per Second. All Nand Flashes can be automatically detected by software in case of unreadable or remarked device names.

Serial Flash Memories: All 8-16 Pins Serial SPI flash memories are supported by TNM5000. All SPI flash Memories can be detected automatically by software in case of unreadable device names. It reads & programs SPi flashes with maximum safe speed on ZIF (6-7 Mbit/second) . Also it Unprotects the write protected flashes before writing data to it.

Microcontrollers:

ATMEL: All AVR 8 bits chips (ATMEGA/ATTINY/AT90S) are supported on ZIF Scocket & by ISP cable. High Voltage Parallel on ZIF Programming of AVR up to 64 pins is supported. newly introduced ATXMEGA Series are supported by both PDI & JTAG Method. Old C51 series & new single cycle C51 series are completely supported. All the above series can be detected automatically by TNM5000. ARM7 programming by JTAG is supported.

Microchip: One of the most complete device list for microchip PIC microcontrollers including all PIC12F /PIC12C /PIC16C / PIC16F / PIC18F / DPIC33F / J & K Series. Devices up to 40 Pins can be programmed on ZIF , All PICs can be detected automatically & programmed by ISP cable.

Others: ST, SST, Philips (NXP) , Motorola , Syncmos, Silicon Lab , ICSI , Infineon , Intel , Winbond & ...

Automotive MCUS: Supporting of ST10F & TMS370 Series by ISP cable for many BOSCH/VALEO/SAGEM ECUs (complete ST10F support of XPROG-m programmer device list). supporting of siemense & infineon SAK-C167 connected to 44 or 48 pins flash (Siemense/BOSCH/SAGEM S2000 ECU) like HSE FlasHit Programmer. Supporting NEC & Motorola Devices for Dashboards.

PLD/CPLD/FPGA: Supporting All ALTERA JTAG Devices by emulation of USB B l a s t e r Programmer in Quartus Software. Supporting of Xilinx CPLD/FPGA with jed file. Fast Xilinx FPGA configuration with bit file. Supporting of GAL/PALCE Devices with special option for PALCE unlocking.

Software: With multiple language support (English / Chinese / Russian /polska /Arabic / French /FARSI). More languages & Devices can be added by customer request. You Can Download Software & run it in Demo mode to evaluate it.

Package List:

1 x TNM5000 Programmer

1 x USB Cable

1 x software CD

1 x TQFP44-DIP44 Adapter

1 x TQFP32-DIP28 Adapter

1 x TSOP48-DIP48 Adapter

1 x SOP44-DIP44 Adapter

1 x SOP28-DIP28 300mil adapter

1 x SOP8-DIP8 200-208mil adapter

1 x SOP8-DIP8 150mil adapter

1 x TSSOP28 to DIP28 adapter

1 x TSSOP8 to DIP8 adapter

1 x SOP16 TO DIP16 adapter

1 x SOP20-DIP20(200~208mil)adapter

1 x PLCC44-DIP44 adapter

1 x PLCC32-DIP32 adapter

1 x PLCC28-DIP24 Adapter

1 x PLCC20-DIP20 Adapter

1 x SOP4/SOP28-SSOP4/SSOP28simple Adapter

1 x SOP16/SOP8 simple Adapter

1 x SOIC8 SOP8 To DIP8 CLIP

1 x IC Chip Extractor

XELTEK SuperPRO 610P Universal Programmer can use for items list:

Login to Download: Download software

Xeltek SuperPro 610P is a device for programming EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR, NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, FWH, microcontrollers, standard micrologic circuits.

Features

Universal 48-pin driver supports today's most complex devices.

Possibility to connect 99% of the existing microelectronic circuits in case you buy a corresponding adapter.

Programs devices with Vcc as low as 1.2V.

In-system programming (ISP / ICP) capability.

Programming / testing features for TTL/CMOS logic ICs and memories.

Software updates.

RoHS compatible, CE, ISO 9001, ISO 14001 certificates.

Application

Device repair ? re-flashing microchips, microcontrollers.

Flashing new microchips.

Serial manufacturing - microchips, microcontrollers programming.

Restoring data from microchips of solid-state drive.

Technical Specifications

Input/Output built-in 48 pin connector

Package Types DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, BGA, CSP, SCSP

Interface USB 2.0

Software compatible OS Windows XP, Windows Vista, Windows 7, Windows 8 (32/64 bit)

Power Supply Input 90 V-250 V AC, output 12 V DC/1.5 A

Size, L W H 178 130 40 mm

Weight 0.38 kg (without package)

Package Contents

USB Interfaced Universal Programmer Xeltek SuperPro 610P ? 1 pc.

AC Power Adapter ? 1 pc.

USB Cable ? 1 pc.

CD with Software ? 1 pc.

User Manual ? 1 pc.

Optional Accessories

Adapters

Compact-Flash (CF) card

DX3013 Adapter for XELTEK SuperPro 6100N

XELTEK SuperPRO 610P Universal Programmer can use for items list:

Login to Download: Download software

Xeltek SuperPro 610P is a device for programming EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR, NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, FWH, microcontrollers, standard micrologic circuits.

Features

Universal 48-pin driver supports today's most complex devices.

Possibility to connect 99% of the existing microelectronic circuits in case you buy a corresponding adapter.

Programs devices with Vcc as low as 1.2V.

In-system programming (ISP / ICP) capability.

Programming / testing features for TTL/CMOS logic ICs and memories.

Software updates.

RoHS compatible, CE, ISO 9001, ISO 14001 certificates.

Application

Device repair ? re-flashing microchips, microcontrollers.

Flashing new microchips.

Serial manufacturing - microchips, microcontrollers programming.

Restoring data from microchips of solid-state drive.

Technical Specifications

Input/Output built-in 48 pin connector

Package Types DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, BGA, CSP, SCSP

Interface USB 2.0

Software compatible OS Windows XP, Windows Vista, Windows 7, Windows 8 (32/64 bit)

Power Supply Input 90 V-250 V AC, output 12 V DC/1.5 A

Size, L W H 178 130 40 mm

Weight 0.38 kg (without package)

Package Contents

1 * XELTEK SuperPro 610P Programmer

1 * AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

1 * USB Cable

1 * CD Software

1 * TSOP48 Adapter

1 * SOP28-DIP28 (300mil) Adaptador

1 * SOP20-DIP20 (200mil) Adaptador

1 * SOP8-DIP8 (200mil) Adaptador

1 * SOP16-DIP16 (150mil) Adaptador

1 * SOP8-DIP8 (150mil) Adaptador

1 * TSSOP8-DIP8 (170mil) Adaptador

1 * PLCC44-DIP44

1 * PLCC44-DIP40

1 * PLCC32-DIP32

1 * PLCC28-DIP28

1 * PLCC28-DIP24

1 * PLCC20-DIP20

1 * SOP8-DIP8 Simple Adaptador

1 * QFN8 WSON8 Simple Adaptador

1 * MSOP8/SSOP8/SOP8/SOP16-DIP16 Simple Adaptador

2 * SSOP4-28PIN 0.65mm / SOP4-28PIN 1.27mm Simple Adaptador

1 * LCD LED screen EDID code

1 * SOP8 Clamp Test

1 * IC Chip Extractor

This adapter can use on RT809H XGecu TL866II Plus, T56 programmer and other universal programmers such as Superpro, TNM, TOP, GQ-4X, Stager, SOFI and so on.

Applicable IC Dimensions(REF.) : both 6*5MM

Applicable IC Package:

-QFN8

-MLF8

-MLP8

-WSON8

-DFN8

Pitch: 1.27mm

DX1027 Adapter for XELTEK SuperPro 6100N

ARM and FLASH parallel programming and simulation tools

Login to Download: Download software

items list Download

JTAG interface for ARM standard 20PIN, 2.54mm interface

ARM7/ARM9 can be used for H-JTAG software can support the development board

Other chips are tested at the end

The shell color is all white,

Packing list:

WIGGLER host a, 20P line a (about 20CM long)

Product Description

Package includes: 1PCS X SOP56 base board

SOP56 Programmer Adapter SOP56-DIP48 Socket for TL866

Stock: in stock

Condition: NEW

Altera USB Blaster Download Cable FPGA CLPD NIOS JTAG-Original Rev.C Hardware

Login to Download: Download software

* 100% same as Original Altera USB Blaster Hardware Design! * Much faster & reliable than cheap low-end USB Blaster

Q: Why is this Altera programmer more expensive than those cheaper Altera programmers?

A: This Altera USB blaster is designed based on 100% original Altera USB blaster hardware soltion: FTDI's FT245+ Altera's EPM CPLD chip solution. Unlike those cheap CY hardware solution USB Blaster. The original design uses FDTI+CPLD soltuion, which is the most reliable and fast design.

Q: Is the original hardware design solution better?

A: Yes, absolutely. The original Altera USB Blaster's hardware design is much stable and faster when programming the Altera CLPD/FPGA chips. It's designed to last, providing professional download speed and stable performance.

Q: How do I distinguish the original hardare solution USB Blaster from the cheaper ones?

A: Size & price. Orginal hardware platform uses FTDI's FT245+ Altera's EPM CPLD solution, which means definitely PCB bigger size. For those so-called "Mini" type USB Blaster, they're 100% cheap low-end programmer, which can get really hot on its surface when running. For the price, even the single FTDI chip's cost is much higher than the complete low-end altera programmer set.

100% same hardware platform designed from original Altera USB Blaster. Using FTDI's FT245+Altera EPM CPLD chip soltuion, the most reliable & fast solution as Altera USB Blaster download cable.

Directly uses original Altera USB Driver.

Supported OS: Windows 8, Windows 7, Windows Vista, Windows XP & 2000

Provide much more stable & fast programming speed for your Altera system design work.

Support JTAG I/O voltage between 1.5V-5V

Support SignalTapII Embedded Logic Analyzer function

Support ALL Altera series components , including all CPLD and FPGA devices.

Key Features:

Supported target voltage : 1.5V-5V

Support all ALTERA deveice.

CPLD:MAX 3000A?MAX 7000A?MAX 7000B?MAX 7000S?MAX 9000?MAX 9000A and MAX II.

FPGA:Stratix? Stratix II?Stratix GX?Cyclone?Cyclone II?Cyclone III?ACEX 1K?APEX II?APEX 20K?APEX 20KE?APEX 20KC?FLEX 10K?FLEX 10KE?FLEX 10KA?FLEX 6000?FLEX 8000?EPCS1?EPCS4?EPCS16?EPCS64EPC1?EPC4?EPC8?EPC16

Support JTAG,AS, PS mode:

Under JTAG mode:Cyclone?Cyclone II?Cyclone III?Stratix?Stratix II?ACEX 1K?APEX II?APEX 20K?APEX 20KE?APEX 20KC?FLEX 10K?FLEX 10KE?FLEX 10KA?FLEX 6000,FLEX 8000?MAX 3000A?MAX 7000A?MAX 7000B?MAX 7000S?MAX 9000?MAX 9000A and MAX II.

AS mode:EPCS1?EPCS4?EPCS16?EPCS64

PS mode:Stratix?Stratix II?Stratix GX.

Support NiosII embeded core based debug,with this debugger, there will be no warning windows poped up duringthe NiosII debug.

High performance, 10 times faster than ByteBlasterII !!

Driver Install Process:

1> Connect the device, and manually set the driver location to your Quartus install path, for example: C:\altera\quartus\drivers\usb-blaster

2> Run Quartus, and select the USB Blaster at Tools > Programmers, select the USB Blaster from HardwareSetup panel.

Package Included:

1 x Altera USB Blaster programmer (original hardware design solution)

1 x 10-Pin Flex cable

1 x USB Cable