• Show Sidebar

There are 319 products.

Active filters

  • Categories: Programmer & Sockets
  • Categories: Programmer socket
  • Availability: In stock

TVP2588U 24252693SPIBIOSEN25T80 Programmer

TVP2588U+ /24/25/26/93/SPI/BIOS/EN25T80 Programmer

Login to Download: Download software

Packing List:

1. Programmer one

2. Instructions

3. A power adapter (used to leave the computer, offline copy A chip to B chip).

4. USB data line (line color is supplied with manufacturer).

5. Simple patch read and write conversion board

6. Software download address

Note: Support only XP Win7-32bit driver.

CH003906
€30.96

TVP2588U+ /24/25/26/93/SPI/BIOS/EN25T80 Programmer

XELTEK SuperPro 6100N Universal IC Chip Device Programmer NEWEST version

XELTEK SuperPro 6100N (so not 6100)Universal Programmer 100,000+ devices supported

Login to Download: Download software

Note: DIP48 adaptor(DX0001) are no longer standard with SP6100N and SP6104N, From 1 June 2020 .

SuperPro 6100N is a cost-effective, reliable, and high-speed universal chip programmer. It is designed to communicate using USB 2.0 port for development requirement and can also work in standalone mode (without connecting to a PC) for production requirement. It has the largest device support count in the programming industry with 144 pin drivers to support high pin count chips.

Application and target customers: Programming houses, electronic repair, car repair shops, forensic and data recovery companies, medical devices, requirement for larger device support.

Advantages of SuperPro 6100N

Ultra Fast Programming Speed SuperPro 6100 is designed with high programming speed in mind. Our semiconductor manufacturer approved algorithms, precision and clean signals guarantee high programming yield. Special design was made to eliminate overshoot and ground bounce. Algorithms are performed with state machine architecture constructed with FPGA to achieve a ultra-high programming speed.

Largest Device Support Located in Silicon Valley, we keep good relationships with many major IC companies that are important for us to continuously support new devices. SuperPro 6100 currently supports more than 100,000 devices, which is the largest device library in the programming industry. Requested device algorithms can be added within a week - average lead time from other manufacturers is over two months.

Built-in 144 Pin Driver Most universal IC programmers are designed with 48 pin driver or less. Programmers with a 48 pin driver design need special adapters (pin mapping) to accommodate devices with more than 48 pins. Bottom boards needed for pin mapping can quickly increase production costs just to support one package type. SuperPro 6100N is equipped with a built-in universal 144 pin driver to accommodate large pin count devices. One universal adapter accommodates all devices with the same package type.

Stand-Alone Mode Unlike many other universal programmers in the industry, SuperPro 6100N is capable of operating in stand-alone mode. Under stand-alone mode, SuperPro 6100 can be operated by an inexperienced operator with minimal training. Once the project file is selected, the operator only has to insert a blank chip and remove the programmed chip upon beeping. This ensures a minimal chance that an operator will make a mistake. Users can also use clusters of stand-alone programmers to achieve high volume production. Last but not the least, stand-alone mode saves both the cost of PC and labor of the trained and qualified operator.

Tester for Logic Devices and SRAMs In addition to having a large device library, SuperPro 6100 programmer is also designed for IC testing of varioudevices such as TTL, CMOS Logic (74/4000 series), and SRAM memory devices.

Hardware and Electrical Specifications

Devices supported

EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU

Package types supported

DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON, EBGA, FBGA, FTBGA, VFBGA, BGA, CSP, SCSP, QFN, HVQFN etc.

PC interface

USB 2.0

Stand-alone memory

Compact FLASH Card

Power supply

AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

Dimensions

Main unit: 148(L) x 216(W) x 94(H) mm

Package: 301(L) x 252(W) x 145(H) mm

Weight

Main unit: Weight 3.5 lbs (1.6 Kg)

Package: Weight 6.2 lbs (2.8Kg)

Expanded Features

Operate multiple units to construct a concurrent multi-programming system. Cluster 1-15 units for flexible volume production.

Support devices with Vcc from 1.2V - 5V.

Support files up to 256 GB.

Over-current and over-voltage protection for safety of the chip and programmer hardware.

Only IC manufacturer approved programming algorithms used for high reliability.

Vcc verification (at +5% ~ -5% and +10% ~ -10%) enhances programming reliability.

Ac Acessories:

Main unit with a DIP48 adaptor, AC adaptor, USB2.0 cable, user manual, software CD, register card

Optional accessories: adaptor in varies packages, CF card for stand-alone operation.

CH003931
€926.19

XELTEK SuperPro 6100N Universal IC Chip Device Programmer NEWEST version

XPROG Box ECU Programmer XPROGM V612 with USB Dongle

Latest Released Xprog V6.12 ELDB Add more function XPROG-M ECU Programmer With USB Dongle

Software V6.12 Firmware V5.4

Top 5 Reasons to Get Newest XPROGV6.12:

New Generation Hardware, runs more steady and faster than oldversion.

Latest software version: V6.12 ,Firmware V5.4

Language: English

Operating system: WinXP/Win7/Win8

Add More Authoirzation than old version:

Add new authorization:

AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9

AUTH-0028-3 Renesas RL78Authorized and AUTH-0028-4 Renesas M32C Authorized(New Add)

XPROG V6.12 using tips:

1.XPROG V6.12 dongle isn't compatible with older version Xprog. You are not allowed to update from the older version Xprog V5.55 V5.60 V5.70 V5.84 to this newest V6.12 XPROG-M Dongle.

2. Please Close all anti-virus software in your computer, becaUse the anti-virus software will kill Xprog V6.12 driver and software.

3. Disconnect internet. Or V6.12 XPROG-M hardware may be damaged .

4. Uninstall all the old version XPROG software before you install V6.12 software, because XPROG V6.12 hardware is not compatible with other version XPROG software. Otherwise the hardware will be damaged and its warranty will be invalid.

5. Never try to UPDATE it, the hardware will be damaged if you try to update it online. Warranty will be invalid

Install Notice:

Please windows system required as below:

1.Windows system should be windows XP 32bit OR windows 7 64 bit, all the patchsoftware for the windows system should be installed already and the windowsproperly works well...

2.The windows system should be with at lest 2 partitions (except the CD ROM.)

3.Can not be working with virtual harddisk.

Install Steps Manual:

1.Click the file "installation.reg", get the file information to theregedit.

2.Install the file "AdbeRdr11000_zh_CN.exe", it is a must, otherwisethe Xprog software will not start.

3.Plug the Xprog main interface to the computer, install the USB driver.

4.Copy the folder "XPROG-BOX6.12" to the desktop, and open it, and runthe "xprogdesktop.exe", then software open.

XPROG V6.12 Authorizations:

AUTH-0001Motorola HC05 family authorization (allows to read/write EEPROM)

AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)

AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)

AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROMand flash memory)

AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows toread/write EEPROM)

AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization(allows to read/write secured EEPROM and flash memory)

AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.

AUTH-0008 BMW EWS3 authorization

AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flashmemory)

AUTH-0010 MB ZGS001 authorization

AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypasssecurity bit and read EEPROM and RAM memory)

AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)

AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)

AUTH-0015 MPC5xx authorization (depending on device program automaticallydetects MPC5xx, M95xxx device type, flash, external flash and configurationmemory size)

AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization(allows to read/write secured EEPROM and flash memory)

AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/writeinternal flash and external serial EEPROM)

AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows toread/write secured and non-secured internal flash and external serial EEPROM,view ange mileage, Chassis number (VIN), serial number and PIN code).

AUTH-0023-1 MAC7xxx

AUTH-0023-2 XC23xx

AUTH-0024-1 MC9S12Cxx

AUTH-0024-2 MC9S12XE

AUTH-0024-3 9S12XE SECURITY

AUTH-0024-4 MC9S12HA/HY/P

AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13

AUTH-0027-1HC(S)908 update Authorized 2016/3/13

AUTH-0027-2HC(S)908 sercurity Authorized 2016/3/13

AUTH-0028-1Renesas V850 Authorized 2017/10/9

AUTH-0028-2Renesas SuperH Authorized 2017/10/9

AUTH-0028-3Renesas RL78 Authorized ---New!

AUTH-0028-4Renesas M32C Authorized ---New!

XPROG-M V6.12 Adapters Newly Added:

ADP-0019 Rev.B ----New!

ADP-0006 M35080 ICP adapter ---New!

QFP64 MC908AZ/AS60 3K85K adapter ---New!

QO18S714 ---New!

XPROG-M V6.12 Adapters included:

ADP-0001 TMS370 PLCC28 programming adapter

ADP-0002 TMS370 PLCC44 programming adapter

ADP-0003 TMS370 PLCC68 programming adapter

ADP-0004 Motorola HC05B/X PLCC52 programming adapter

ADP-0005 Motorola HC05B/X QFP64 programming adapter

ADP-0006 ST M35080 in-circuit programming adapter

ADP-0008 TMS374 family in-circuit programming adapter

ADP-0009 MC68HC05V12 programming adapter

ADP-0010 TMS374 on-board programming adapter

ADP-0011 HC11EA9/E9 programming adapter

ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass securityadapter

Additional adaptor for 5M48H P-FlashADP-0019Rev.A

EWS3 adaptor

EEPROM adaptor

QFP28 adaptor

QFP64 adaptor

QFP80 adaptor

QFP112 adaptor

QFP144 adaptor

Package List:

1pc x XPROG-Box Hardware (Aluminum Enclosure)

19pc x Adapters Set

1pc x USB Cable

1pc x 16Pin cable

1pc x CD with XPROG-Box Software (V6.12)

CH003946
€185.24

X-PROG Box ECU Programmer XPROG-M V6.12 with USB Dongle

High Quality UV EPROM ERASER Ultraviolet Light Timer

Specifications:

UV EPROM Eraser, Ultraviolet Light UV EPROM Eraser

High Speed UV Ultraviolet Light Erasable EPROM Eraser New Timer

UV Ultraviolet Light Erasable EPROM Eraser Erase New Timer

High Speed UV Light UV EPROM Eraser used 14 110 - 240VAC Timer ic

C18 UV EPROM Eraser Erase Erasable Ultraviolet Light Timer

UV Ultraviolet Light Erasable EPROM Eraser Erase Timer

UV EPROM Eraser

Characteristics:

Brand New and high quality.

The chip is used to erase EPROM Storage.

You can delete all data in 10 minutes.

Please remove the tape adhestive before the Chip Erase.

Deletes up to 8 unids 40 PIN DIP, 32pin, 28PIN IC at the same time.

Easy to use.

Place your chips in the Box, set the timer and turn it on.

UV Light: 1 - 60 minutes.

Timer function can be switched on / off the device.

Deletes up to 6 - 8 tokens.

110 - 240 V 6a.

Power Cord: around 1.2 meter long

Size: 10.2 cm x 12.7 cm x 5 cm (approx).

The package includes:

1 * EPROM Eraser

CH003978
€16.78

High Quality UV EPROM ERASER Ultraviolet Light Timer

Newest Serial Suite Piasini Engineering V43 Master Version With USB Dongle

Newest Serial Suite Piasini Engineering V4.3 Master Version With USB Dongle

Top 3 reasons to get Serial suite Piasini Engineering V4.3 Master Version:

1. Latest Firmware version: V4.3

2. With usb dongle, software no need active, directly use.

3. It is Master version, support full dump file read and write, support more vehicle list than V4.1.

Notice:

1. Software language: English

2. Windows XP System

Serial suite Piasini Engineering V4.3 Master Version Features:

* JTAG - BDM - K-line - L-line - RS232 - CAN-Bus

* Read/Write Programmer

* Checksum Correction Incorporated for Mitsubishi/Denso/Hitachi

* Server On-line Updates and Security Survey

* New ECU Implementation Free of Charge

Serial suite Piasini Engineering V4.3 Master Version Supported Car List:

Denso-Mitsubishi

Denso-Nissan

Denso-Suzuki

Denso-Jaguar

Hitachi-Nissan

Keihi-Honda

EFI-Lotus

EFI-Lamborghini

Serial suite Piasini Engineering V4.3 Master Version Supported Motorcycles List:

Denso-Suzuki

Denso-kawasaki

Mitsubishi-Yamaha

Keihi-Honda

Simens-Renault

Denso-Subaru

Mitsubishi

Mitsubishi-Mazda

Denso-Volvo

Denso-Mazda

Denso-Reanault

Transtron

Denso-Opel

Mitsubishi-Opel

Toolbox Serial

Toolbox C16x

Serial suite Piasini Engineering V4.3 Master Version Screen Display:

Packing List:

1pc * Software Piasiniengineering Suite

1pc * USB Cable

1pc * Power Supply 110-220V/13.5V

1pc * Dongle protection

1pc * OBD Cable Standard

8pc * General Purposes Cable

CH004055
€84.54

Newest Serial Suite Piasini Engineering V4.3 Master Version With USB Dongle

TVP2588U 24252693SPIBIOSEN25T80 Programmer

TVP2588U+ /24/25/26/93/SPI/BIOS/EN25T80 Programmer

Login to Download: Download software

Packing List:

1. Programmer one

2. Instructions

3. A power adapter (used to leave the computer, offline copy A chip to B chip).

4. USB data line (line color is supplied with manufacturer).

5. Simple patch read and write conversion board

6. Software download address

Note: Support only XP Win7-32bit driver.

CH003906
€30.96

TVP2588U+ /24/25/26/93/SPI/BIOS/EN25T80 Programmer

XELTEK SuperPro 6100N Universal IC Chip Device Programmer NEWEST version

XELTEK SuperPro 6100N (so not 6100)Universal Programmer 100,000+ devices supported

Login to Download: Download software

Note: DIP48 adaptor(DX0001) are no longer standard with SP6100N and SP6104N, From 1 June 2020 .

SuperPro 6100N is a cost-effective, reliable, and high-speed universal chip programmer. It is designed to communicate using USB 2.0 port for development requirement and can also work in standalone mode (without connecting to a PC) for production requirement. It has the largest device support count in the programming industry with 144 pin drivers to support high pin count chips.

Application and target customers: Programming houses, electronic repair, car repair shops, forensic and data recovery companies, medical devices, requirement for larger device support.

Advantages of SuperPro 6100N

Ultra Fast Programming Speed SuperPro 6100 is designed with high programming speed in mind. Our semiconductor manufacturer approved algorithms, precision and clean signals guarantee high programming yield. Special design was made to eliminate overshoot and ground bounce. Algorithms are performed with state machine architecture constructed with FPGA to achieve a ultra-high programming speed.

Largest Device Support Located in Silicon Valley, we keep good relationships with many major IC companies that are important for us to continuously support new devices. SuperPro 6100 currently supports more than 100,000 devices, which is the largest device library in the programming industry. Requested device algorithms can be added within a week - average lead time from other manufacturers is over two months.

Built-in 144 Pin Driver Most universal IC programmers are designed with 48 pin driver or less. Programmers with a 48 pin driver design need special adapters (pin mapping) to accommodate devices with more than 48 pins. Bottom boards needed for pin mapping can quickly increase production costs just to support one package type. SuperPro 6100N is equipped with a built-in universal 144 pin driver to accommodate large pin count devices. One universal adapter accommodates all devices with the same package type.

Stand-Alone Mode Unlike many other universal programmers in the industry, SuperPro 6100N is capable of operating in stand-alone mode. Under stand-alone mode, SuperPro 6100 can be operated by an inexperienced operator with minimal training. Once the project file is selected, the operator only has to insert a blank chip and remove the programmed chip upon beeping. This ensures a minimal chance that an operator will make a mistake. Users can also use clusters of stand-alone programmers to achieve high volume production. Last but not the least, stand-alone mode saves both the cost of PC and labor of the trained and qualified operator.

Tester for Logic Devices and SRAMs In addition to having a large device library, SuperPro 6100 programmer is also designed for IC testing of varioudevices such as TTL, CMOS Logic (74/4000 series), and SRAM memory devices.

Hardware and Electrical Specifications

Devices supported

EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU

Package types supported

DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON, EBGA, FBGA, FTBGA, VFBGA, BGA, CSP, SCSP, QFN, HVQFN etc.

PC interface

USB 2.0

Stand-alone memory

Compact FLASH Card

Power supply

AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

Dimensions

Main unit: 148(L) x 216(W) x 94(H) mm

Package: 301(L) x 252(W) x 145(H) mm

Weight

Main unit: Weight 3.5 lbs (1.6 Kg)

Package: Weight 6.2 lbs (2.8Kg)

Expanded Features

Operate multiple units to construct a concurrent multi-programming system. Cluster 1-15 units for flexible volume production.

Support devices with Vcc from 1.2V - 5V.

Support files up to 256 GB.

Over-current and over-voltage protection for safety of the chip and programmer hardware.

Only IC manufacturer approved programming algorithms used for high reliability.

Vcc verification (at +5% ~ -5% and +10% ~ -10%) enhances programming reliability.

Ac Acessories:

Main unit with a DIP48 adaptor, AC adaptor, USB2.0 cable, user manual, software CD, register card

Optional accessories: adaptor in varies packages, CF card for stand-alone operation.

CH003931
€926.19

XELTEK SuperPro 6100N Universal IC Chip Device Programmer NEWEST version

XPROG Box ECU Programmer XPROGM V612 with USB Dongle

Latest Released Xprog V6.12 ELDB Add more function XPROG-M ECU Programmer With USB Dongle

Software V6.12 Firmware V5.4

Top 5 Reasons to Get Newest XPROGV6.12:

New Generation Hardware, runs more steady and faster than oldversion.

Latest software version: V6.12 ,Firmware V5.4

Language: English

Operating system: WinXP/Win7/Win8

Add More Authoirzation than old version:

Add new authorization:

AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9

AUTH-0028-3 Renesas RL78Authorized and AUTH-0028-4 Renesas M32C Authorized(New Add)

XPROG V6.12 using tips:

1.XPROG V6.12 dongle isn't compatible with older version Xprog. You are not allowed to update from the older version Xprog V5.55 V5.60 V5.70 V5.84 to this newest V6.12 XPROG-M Dongle.

2. Please Close all anti-virus software in your computer, becaUse the anti-virus software will kill Xprog V6.12 driver and software.

3. Disconnect internet. Or V6.12 XPROG-M hardware may be damaged .

4. Uninstall all the old version XPROG software before you install V6.12 software, because XPROG V6.12 hardware is not compatible with other version XPROG software. Otherwise the hardware will be damaged and its warranty will be invalid.

5. Never try to UPDATE it, the hardware will be damaged if you try to update it online. Warranty will be invalid

Install Notice:

Please windows system required as below:

1.Windows system should be windows XP 32bit OR windows 7 64 bit, all the patchsoftware for the windows system should be installed already and the windowsproperly works well...

2.The windows system should be with at lest 2 partitions (except the CD ROM.)

3.Can not be working with virtual harddisk.

Install Steps Manual:

1.Click the file "installation.reg", get the file information to theregedit.

2.Install the file "AdbeRdr11000_zh_CN.exe", it is a must, otherwisethe Xprog software will not start.

3.Plug the Xprog main interface to the computer, install the USB driver.

4.Copy the folder "XPROG-BOX6.12" to the desktop, and open it, and runthe "xprogdesktop.exe", then software open.

XPROG V6.12 Authorizations:

AUTH-0001Motorola HC05 family authorization (allows to read/write EEPROM)

AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)

AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)

AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROMand flash memory)

AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows toread/write EEPROM)

AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization(allows to read/write secured EEPROM and flash memory)

AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.

AUTH-0008 BMW EWS3 authorization

AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flashmemory)

AUTH-0010 MB ZGS001 authorization

AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypasssecurity bit and read EEPROM and RAM memory)

AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)

AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)

AUTH-0015 MPC5xx authorization (depending on device program automaticallydetects MPC5xx, M95xxx device type, flash, external flash and configurationmemory size)

AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization(allows to read/write secured EEPROM and flash memory)

AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/writeinternal flash and external serial EEPROM)

AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows toread/write secured and non-secured internal flash and external serial EEPROM,view ange mileage, Chassis number (VIN), serial number and PIN code).

AUTH-0023-1 MAC7xxx

AUTH-0023-2 XC23xx

AUTH-0024-1 MC9S12Cxx

AUTH-0024-2 MC9S12XE

AUTH-0024-3 9S12XE SECURITY

AUTH-0024-4 MC9S12HA/HY/P

AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13

AUTH-0027-1HC(S)908 update Authorized 2016/3/13

AUTH-0027-2HC(S)908 sercurity Authorized 2016/3/13

AUTH-0028-1Renesas V850 Authorized 2017/10/9

AUTH-0028-2Renesas SuperH Authorized 2017/10/9

AUTH-0028-3Renesas RL78 Authorized ---New!

AUTH-0028-4Renesas M32C Authorized ---New!

XPROG-M V6.12 Adapters Newly Added:

ADP-0019 Rev.B ----New!

ADP-0006 M35080 ICP adapter ---New!

QFP64 MC908AZ/AS60 3K85K adapter ---New!

QO18S714 ---New!

XPROG-M V6.12 Adapters included:

ADP-0001 TMS370 PLCC28 programming adapter

ADP-0002 TMS370 PLCC44 programming adapter

ADP-0003 TMS370 PLCC68 programming adapter

ADP-0004 Motorola HC05B/X PLCC52 programming adapter

ADP-0005 Motorola HC05B/X QFP64 programming adapter

ADP-0006 ST M35080 in-circuit programming adapter

ADP-0008 TMS374 family in-circuit programming adapter

ADP-0009 MC68HC05V12 programming adapter

ADP-0010 TMS374 on-board programming adapter

ADP-0011 HC11EA9/E9 programming adapter

ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass securityadapter

Additional adaptor for 5M48H P-FlashADP-0019Rev.A

EWS3 adaptor

EEPROM adaptor

QFP28 adaptor

QFP64 adaptor

QFP80 adaptor

QFP112 adaptor

QFP144 adaptor

Package List:

1pc x XPROG-Box Hardware (Aluminum Enclosure)

19pc x Adapters Set

1pc x USB Cable

1pc x 16Pin cable

1pc x CD with XPROG-Box Software (V6.12)

CH003946
€185.24

X-PROG Box ECU Programmer XPROG-M V6.12 with USB Dongle

High Quality UV EPROM ERASER Ultraviolet Light Timer

Specifications:

UV EPROM Eraser, Ultraviolet Light UV EPROM Eraser

High Speed UV Ultraviolet Light Erasable EPROM Eraser New Timer

UV Ultraviolet Light Erasable EPROM Eraser Erase New Timer

High Speed UV Light UV EPROM Eraser used 14 110 - 240VAC Timer ic

C18 UV EPROM Eraser Erase Erasable Ultraviolet Light Timer

UV Ultraviolet Light Erasable EPROM Eraser Erase Timer

UV EPROM Eraser

Characteristics:

Brand New and high quality.

The chip is used to erase EPROM Storage.

You can delete all data in 10 minutes.

Please remove the tape adhestive before the Chip Erase.

Deletes up to 8 unids 40 PIN DIP, 32pin, 28PIN IC at the same time.

Easy to use.

Place your chips in the Box, set the timer and turn it on.

UV Light: 1 - 60 minutes.

Timer function can be switched on / off the device.

Deletes up to 6 - 8 tokens.

110 - 240 V 6a.

Power Cord: around 1.2 meter long

Size: 10.2 cm x 12.7 cm x 5 cm (approx).

The package includes:

1 * EPROM Eraser

CH003978
€16.78

High Quality UV EPROM ERASER Ultraviolet Light Timer

Newest Serial Suite Piasini Engineering V43 Master Version With USB Dongle

Newest Serial Suite Piasini Engineering V4.3 Master Version With USB Dongle

Top 3 reasons to get Serial suite Piasini Engineering V4.3 Master Version:

1. Latest Firmware version: V4.3

2. With usb dongle, software no need active, directly use.

3. It is Master version, support full dump file read and write, support more vehicle list than V4.1.

Notice:

1. Software language: English

2. Windows XP System

Serial suite Piasini Engineering V4.3 Master Version Features:

* JTAG - BDM - K-line - L-line - RS232 - CAN-Bus

* Read/Write Programmer

* Checksum Correction Incorporated for Mitsubishi/Denso/Hitachi

* Server On-line Updates and Security Survey

* New ECU Implementation Free of Charge

Serial suite Piasini Engineering V4.3 Master Version Supported Car List:

Denso-Mitsubishi

Denso-Nissan

Denso-Suzuki

Denso-Jaguar

Hitachi-Nissan

Keihi-Honda

EFI-Lotus

EFI-Lamborghini

Serial suite Piasini Engineering V4.3 Master Version Supported Motorcycles List:

Denso-Suzuki

Denso-kawasaki

Mitsubishi-Yamaha

Keihi-Honda

Simens-Renault

Denso-Subaru

Mitsubishi

Mitsubishi-Mazda

Denso-Volvo

Denso-Mazda

Denso-Reanault

Transtron

Denso-Opel

Mitsubishi-Opel

Toolbox Serial

Toolbox C16x

Serial suite Piasini Engineering V4.3 Master Version Screen Display:

Packing List:

1pc * Software Piasiniengineering Suite

1pc * USB Cable

1pc * Power Supply 110-220V/13.5V

1pc * Dongle protection

1pc * OBD Cable Standard

8pc * General Purposes Cable

CH004055
€84.54

Newest Serial Suite Piasini Engineering V4.3 Master Version With USB Dongle