KWS-1705A USB Multifunction Tester

Limit frame specification: 9.0*11.0mm

More Similar Products

1 Pair 1000V 20A Universal Digital Multimeter Meter Probe Test Leads 3mm Pin Red + Black

Features :

100% brand new and high quality.

The anterior gold-plated design, in the test, the sensitivity of pens and higher and more accurate.

22mm Plug Insertion Depth.

Up to 20A / 1000V

Material: PVC and Alloy

Color: Black + Red

Package includeds :

1 x Pair of Digital Multimeter Meter Probe

QK0826C

Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel

Gauge Evaluator

Login to Download: * EV2300a Device Driver Installer Multilanguage

Model No: EV2300 HPA002

Included:

1 x Texas Instruments EV2300 HPA002 NEW USB Interface Battery Fuel Gauge Evaluator

Description:

The EV2300 is a USB-based interface board for a PC that can be used to evaluate battery fuel gauge circuits designed with Texas Instruments' ICs. The EV2300 has connections on it for a USB cable and also accepts inputs from a battery fuel gauge circuit's communication port (SMBus or HDQ). By running the appropriate PC software for the correspondingfuel gauge IC, the EV2300 interface board allows the user to evaluate the battery fuel gauge circuit. Note: The driver on this page is for 32 bit Windows. See the 64 bit driver e2e post for 64 bit Windows 7 driver information.

Feature:

USB-based interface board for evaluation of battery fuel gauge circuits developed with fuel gauge ICs using the HDQ and SMBus communication protocol

Provides interface between intelligent battery circuit and a Windows-based PC

Connects to the USB port of a PC

Allows for on screen display and programming of gas gauge register functions when used with the appropriate PC software

QK-6M30B Samsung Adapter plate 120HZ_PL.MS6M30K.1

DX3003 Adapter for XELTEK SuperPro 6100N

UT612 LCR Meter

Features

1. 26-segment analog bar graph

2. Series/parallel mode (selectable)

3. 5 frequency tests selectable (100Hz/120Hz/1kHz/10kHz/100kHz)

4. Open/short circuit calibration compensation

5. Smart selection mode for fast selection of components

6. Mini-USB transmission to PC

7. Deviation ratio measurement

8. Data hold, LCD backlight, auto power off

9. relative mode

10. Loss factor (D), quality factor (Q), phase angle (?), equivalent series resistance (ESR), equivalent parallel resistance (EPR) and DCR DC resistance measurements

Product parameters

pecifications Range Best Accuracy

Model UT612

Inductance (H) 20uH~2000H (0.5%+5)

Capacitance (F) 200pF~20mF (0.5%+5)

Resistance (O) 20O~200MO (0.3%+5)

Test Frequency (Hz) 100Hz/120Hz/1kHz/10kHz/100kHz v

Operational Voltage 0.6Vrms v

Test Parameters L/C/R/DCR/Q/D/?/ESR v

Features

Display Count 20000

D/Q Display Count 2000

D/Q Resolution 0.001 v

Auto Range v

Real-Time Display Test Frequency v

Measurement Mode Series/Parallel v

Auto Power Off v

Low Battery Indication =6.8V v

Data Hold v

Relative Mode v

USB Interface v

USB Interface/PC Data Records 60000

LCD Backlight v

Analog Bar Graph 26

Deviation Ratio Measurement v

Comparsion Function v

Calibration Function v

Output Impedance 120O v

Auto LCR Smart Check and Measurement v

General Characteristics

Power 9V Battery (6F22) or USB

LCD Size 40mm X 63mm

Product Colour Red and Grey

Product Net Weight 374g

Product Size 96mm X 193mm X 47mm

Standard Accessories Battery, SMD Test Clamp, USB Interface Cable, Multi-Purpose Socket, PC Software CD

Standard Individual Packing Gift Box, English Manual

Notice: Battery was not included for air shipping, please prepare it by yourself.

Features:

Measuring range : -50~380? (-58~716?)

Accuracy : 1.5? / 1.5%

Resolution : 0.1? or 0.1?

Distance spot ratio : 12 : 1

Emissivity : 0.95 (fixed)

?/? unit selectable

Auto power off & Data Hold

Laser ON/OFF selectable

backlight ON/OFF selectable

Red Laser Power : less than 0.5 MW

Power supply : 2 x 1.5V AAA battery (Not included.)

Product Dimension : 140 x 85 x 35mm (L x W x H)

Package includes :

1x GM320 Infrared Thermometer

1 x User Manual

XGecu T56 Universal Programmer Support NAND/EMMC/MCU/ISP

Login to Download: Download software Device Support List instruction manual

Programmer Overview

1.1 Performance Introduction

Carefully built low-cost professional programmer, high-density chip production process, a

unified user interface, easy to use, functional integrity, application software, reliable

operation, code small, faster execution. supported operating system:

WINXP WIN2003 WIN2008 VISTA WIN7 WIN8 WIN10 32-bit or 64-bit operating system

? The programming speed is greatly improved. It is suitable for small batch production and supports 4 programmers for one computer.

? A wide range of chip support, the initial version supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test, 54/74 and CMOS4000 integrated circuit integrated functional test.

Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits.

25 series Nor Flash capacity support to 512Mbits.

? Pin contact check function, poor contact pin can pinpoint

? Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming

without external power integrated programmer. Portable performance super: the world's smallest volume, size 10CM * 6CM * 2.5CM, only the size of the driver's license.

? Programmable VCC from 1.8V to 6.5V, VPP from 1.8V to 18V chip

? Chip serial number secondary development functions: Programmer built a variety of commonly used automatic numbering function. And can use a custom algorithm to achieve any sequence number through DLL dynamic library. This feature allows you to produce

a unique identification info rmation for each chip in mass production. The logo can also be encrypted with a custom algorithm to more effectively protect your product's rights.

? Universal serial programming interface ICSP (to support both high-voltage parallel programming and low-volt age serial programming). Note: ICSP now supports 24-Series 25 Series 93 Series Serial Integrated Circuits, ATMEL89S51,52, AVR ATMEGAxxx Full

Series, and MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx Full Series, and the new series of SYNCMOS SM59Dxx SM59Rxx fu ll range chips for in-circuit serial programming.

? Powerful 54 / 74F / LS / HC CMOS4000 Series Integrated Functionality Tests: The First Development Programmer to Test Common Logic ICs True, Test Errors Locating Logic Gate Circuits, Test Arbitrary Possible input combinations.

1.2 Programmer chip support range

? Variety of 26 27 28 29 37 39 49 50 series of parallel ROM, EPROM, EEPROM

Fast, full support. Support TSOP32 TSOP40 TSOP48 chips to 64MBits, will join the TSOP56 pin support.

(TL866II programming voltage VPP only supports up to 18V, for early 27C series ROM, the

chip with 21V 25V VPP voltage no longer supports writing, but can be read. If it is used,

the VPP with the same type of programming voltage can be used as 13V or 12V chip replacement, for example: 27C32 21V or 13V Vpp chip,Pay attention to the VPP voltage)

? 24 25 35 45 85 93 95 Series Serial EEPROM

Serial Series Chip Support Full, Supports Chip Capacity 25 Series 8 or 16PIN to 512MBits (64M Bytes)

? NAND FLASH chip supports up to 8Gbits

? MCU series, hundreds of models of 51 series of microcomputer

? AVR microcontroller package scratch ATMEGA series ATtiny series AT90XXX series of microcontrollers, all AVR ATMEGAxxx chip also supports the ICSP interface for SPI serial download programming. Support AVR one-to-one soft-key with RC correction byte.

? MICROCHIP PIC10 PIC12 PIC16 PIC18 Series Microcontroller:

PIC series of more than 300 models, more than 900 package chip support, currently supports

one of the most complete PIC chip integrated programmer. For vario

us types of PIC monolithic, in strict accordance with the manufacturer's manual requirements, the optimal programming, programming speed is excellent. The vast majority of chips support both ISCP online programming and programming through programming sockets.

? GAL programmable logic device programming

? SRAM test

Support for common 24 61 62 DS12 series SRAM test, respectively, to data line testing,

address line testing, memory unit incremental testing and unit testing.

? Super performance 54 / 74F / LS / HC CMO

S4000 series integrated circuit integrated

Function test:

The first development-type programmer to really test common logic ICs to test for errors

that can be located to logic gates, and to test any possible combinations of inputs in an integrated circuit when testing.

0-300V Smart-Fit Voltage Backlight Tester Tool for All Size LED LCD TV Laptop Detect Repair

LED LCD TV backlight problems are always increasingly common. As we know, slight tension Change can have a great impact on TV function. To have a useful tool which is as LED LCD Backlight tester. Using this tool, you can use the LED LCD screen backlight problem quickly. With the function, operating voltage, you can use the exact problem. If there is something wrong with LED light group, you can use it or replace the bad LED beads.

Product description:

Model No.: DLV300

Input voltage: 85-265 V international general

Output voltage: 0-300 V

Notice:

Please, if you are used to the LED lamps finished, unplug the power supply before!

Because it is likely to form a loop, which in Abnormal test!

Additional application:

The capacitance voltage

The voltage regulator

worth 3 lamp drive voltage test!

Examination skills:

Plug IN POWER, it can be used after 5 to 10 seconds (first time, the machine needs to warm up!).

Soft Start mode make the backlight brighter always slow.

No burning, if you can not make the "+" and "-", do not connect the probes to the LED will be tested for a long time.

Open ciruit protection: Do not touch the output terminal of probes for a long time. It is safe for Touch the probes in the shortest time.

Double isolate design makes our testers safety with high strength and flame retardant materials.

Safe / smart / precise / highly efficient

Double isolated safe protection no burning, no electric shock, voltage and current intellgent setting,

High brightness disassemble no need.

Single LED light bar backlight check:

make sure the anode and acthode.

connect the probes to the anode and the cathode.

light up the single LED light bar backlight.

light up the double LED light bar backlight.

Package include:

1x Tester

2X gold plated pin

1x Power Cable

Attention:

The more quantity, the lower price. Please contact us for details.

Description:

LA1010 is a logic analyzer product with high cost performance. It has 16 input channels and the sample rate is up to 100MHz.

Along with the PC software KingstVIS, 16 channels of digital signal could be sampled at the same time, and then they could be

converted to digital waveform and displayed on the PC screen. The signal could be analyzed with many standard protocols,

to get more straightforward communication data. It helps a lot in testing and analyzing digital system(MCU/ARM/FPGA, etc.),

developing and debugging several communication programs, or monitoring and recording some digital signals for a long time.

Software and user manual: http://www.kingst.org/download/?fl=vis.zip

Features:

Portable and lightweight

Max sampling rate: 100M@3channels, 50M@6channels, 32M@9channels, 16M@16channels

Large sampling depth and support compression

The built-in PWM generator

Compatible USB2.0/3.0 interface

Powerful software and easy to use

Support online upgrade automatically

Specifications:

Input channels number: 16

Max sampling rate: 100M

Measurement bandwidth: 20M

Min pulse width can be captured: 20ns

Max sampling depth: 10G/channel

Input voltage range: -50V ~ +50V

Input impedance: 220KO, 12pF

Adjustable threshold voltage: -4V ~ +4V, step: 0.01V

PWM channels number: 2

PWM frequency range: 0.1 ~ 10MHz

PWM frequency adjust step: 10ns

PWM pulse width adjust step: 10ns

PWM output voltage: +3.3V

PWM output impedance: 50O

Standby current: 100mA

Max operating current: 150mA

Dimensions: 95mm * 55mm * 23mm

Supported OS: Windows XP, Vista, Windows 7/8/10(32/64bit)

Supported standard protocols: UART/RS-232/485, I2C, SPI, CAN, DMX512, HDMI CEC, I2S/PCM, JTAG,

LIN, Manchester, Modbus, 1-Wire, UNI/O, SDIO, SMBus, USB1.1, PS/2, NEC InfraRed, Parallel, etc...

Package included:

1 x LA1010 Host

2 x 9P Flat Cable

1 x 2P Flat Cable

20 x Test Hook

1 x USB Cable

1 x CD