Product Information

The Rigol DS1102E Digital Oscilloscope is equipped with up to one million points of deep memory to capture long signals with ease. This oscilloscope has two analog channels and additional trigger with 1 GSa/sec sample rate to identify elusive problems quickly. Its 5.7-inch TFT QVGA display renders enhanced visuals of the waveforms and signal values. Featuring P/F out, RS-232 and USB ports, this oscilloscope enables connectivity and has a 100 MHz bandwidth.

Product Identifiers

Brand RIGOL

MPN DS1102E

UPC 0000888884877, 4016138544817

Model DS1102E

Product Key Features

Channels 2

Type Digital

Additional Product Features

Vertical Resolution 8 Bits

Equivalent Time Sample Rate 25GSa/s

Time BASE Range 2ns/Div to 50 S/Div

Interface DB9 RS-232

Rise Time 3.5ns

Memory Depth 1 Million

Input Impedance 1 Ma| with 15pF

Vertical Sensitivity 2 Mv/Div to 10V/Div

Display Size 5.7in.

NOTE: Battery is not inclued in package

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

Due to the large number of intelligent network TV on the market, the main program is getting larger and larger, and the main program burning tool is becoming more and more specialized. A TSD flash chip writer with high cost performance is specially developed, and its performance is as follows:

This programmer is 50 mm long and 42 mm wide, small in size, with an engineering plastic shell, high in strength and easy to carry. Because it uses a high-speed USB2.0 interface, it is fast and can write the main program with 1gd capacity in less than 4 minutes. It is currently widely used in the 8a08 and 8a10 cores of Skyworth. TSD chip has large capacity, low price and high cost performance. It will be widely used in the future smart flat-panel TV. However, due to the large capacity of tsd-flash chip, it is impossible to burn it with a small serial port board, so it is necessary to burn the main program of the intelligent TV system. At present, it is widely used in the hands of manufacturing, production and development engineers. In order to facilitate the front-line maintenance personnel This writer is specially developed for front-line personnel. It can solve the burning problem of main program. The product is low in price, small in size, easy to carry, and fast in burning and writing chips. It is one of the necessary tools for maintenance and testing of intelligent TV, MP3, MP4, navigation, U disk manufacturers, etc.

TSD burning refers to writing the executable code (such as u-boot), user data (such as preset data) compiled by PC or the whole system image and other data into TSD in the way of logical address operation before TSD mounting, which saves time and labor after assembling the whole machine. At the same time, it is also one of the necessary tools for maintenance personnel to burn and write the main program of intelligent network TV.

At present, when the main program of Skyworth main push movement 8A08 and 8A10 is lost, it is necessary to use this burners to burn !

Only support Foresee

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

Login to Download: * User Manual Download

? Brand Name:ZOTEK

? DC Current:1uA-20A

? Dimensions:176*91*47mm

? AC Current:1uA-20A

? DIY Supplies:Electrical

? Measuring Inductance Range:NCV

? Measuring Resistance Range:0.1ohm-60Mohm

? Model Number:ZT-M0

? AC Voltage:0.001mV-750V

? Operating Temperature:0 - 40 ?

? Operating Mode:Auto/Manual

? Display Type:Digital Display

? DC Voltage:0.001mV-1000V

? Measuring Capacitance Range:0.001nF-99.99mF

? Frequency:0.001Hz-9.999MHz

? Display (LCD):6000 counts

? Material:ABS/PVC

? Update Rate:3 times/second

? Ture RMS:Yes

? Data Hold:Yes

? Backlight:Yes

? Low Battery Indication:Yes

? Auto Power Off:Yes

? Battery Type:1.5V AA Battery x3(not include the package)

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

Short review RIGOL DS2072A. Dual-channel digital oscilloscope wth 70 MHz bandwidth, 2 GSa/s real-time sample rate, 8" display and 50,000 waveforms/sec acquisition.

RIGOL DS2072A digital oscilloscope is a new high-quality dual-channel oscilloscope (70 MHz). This compact lightweight digital oscilloscope provides exceptionally accurate waveform viewing and measurements. RIGOL DS2072A provides up to 50 000 wfms/s waveform acquisition rate.

RIGOL DS2072A digital oscilloscope is ideal for production tests, field service, research, design and all other applications involving analog/digital circuit tests and troubleshooting, as well as education and training.

FEATURES

? Bandwidth: 70 MHz.

? 2 channels.

? Real-time sample rate: 2 GSa/s.

? Memory depth: 14 Mpts.

? Innovative UltraVision technology.

? Vertical sensitivity: 500 V/div ? 10 V/div.

? Waveform acquisition rate up to 50,000 wfms/s.

? Math functions: Add, Subtract, Multiply, FFT.

? 8-inch color LCD.

? Standard interface: USB host & device, LAN, AUX.

? The recommended calibration interval period is one year.

? Real-time waveform recording, waveform playback, and waveform analysis.

? Compact design, small dimensions, light weight.

TECHNICAL SPECIFICATIONS

Bandwidth

70 MHz

Channels

2

Real time sample rate

2 GSa/s (single-channel), 1 GSa/s (dual-channel)

Memory depth

14 Mpts (Std.), 56 Mpts (Opt.)

Waveform acquisition rate

50,000 wfms/s (Max. )

Vertical sensitivity range

500 V/div ? 10 V/div

Offset range

500 V/div ? 50 mV/div ( 2 V)

51 mV/div ? 200 mV/div ( 10 V)

205 mV/div ? 2 V/div ( 50 V)

2.05 V/div ? 10 V/div ( 100 V)

Vertical resolution

8 bits

Math

Add, Subtract, Multiply, FFT, editable

Output voltage

~ 3 V, peak-peak

Frequency

1 kHz

General Specifications

Trigger modes

Auto, Normal, Single

Power

50 W (max.)

Power voltage

100-240 V, 45-440 Hz

Temperature range

Operation: 0C to +50C

Non-operation: -20C to +70C

Cooling method

Fan

Standard Ports

USB host (support USB-GPIB), USB device, LAN, Aux (TrigOut/PassFail)

Display

8" WVGA color LCD (800480)

Weight

3.9 kg ( 0.2 kg)

Dimensions

361.6 179.6 130.8 mm

PACKAGE CONTENTS

? RIGOL DS2072A digital oscilloscope (1 pc.)

? Passive probes (2 pcs.)

? Power cable (1 pc.)

? USB data cable (1 pc.)

? Quick guide (1 pc.)

? CD (Software and User's guide) (1 pc.)

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

Hantek PP-150 Oscilloscope Probe Accessories with Alligator Clip 1X 10X 100MHz

Descriptions:

Integral injection molding makes the usage more flexible and the oscilloscope able to adapt more testing situations. Attenuation ratio: 1x and 10x optional. Compatible with domestic and international digital and analog oscilloscopes in relevant frequency.

Features:

Attenuation ratio: 1x and 10x optional.

Portable design according with ergonomics.

Integral injection molding makes the usage more flexible and the oscilloscope able to adapt more testing situations.

Safety standards: it has passed the CE Attestation of European Community.

Compatible with domestic and international digital and analog oscilloscopes in relevant frequency.

Measurement in intermediate and low frequency signals.

Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.

Specifications:

Item PP-150

Attenuation x1 x10

Input resistance 1MO:10MO

Input capacitance x1: 85pF-115pF

x10: 18.5pF-22.5pF

Compensation scope 15pF-35pF

System bandwidth x1: DC-6MHz

x10: DC-100MHz

Input voltage x1:<200V DC +Peak AC

x10: <600V DC +Peak AC

weight 76g

Cable length 120cm

Temperature scope: Operation: -10?--+50?

Not Operation: -20?--+75?

Humidity =85% (Relative humidity)

Package Included:

1 x Oscilloscope probe

1 x adjust tool

1 x tip locating sleeve

6 x color circle

1 x instructions

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

QK0806B