• Show Sidebar

There are 332 products.

Active filters

  • Categories: EFI Rom Cable
  • Categories: Pin Holder
  • Categories: Programmer & Sockets
  • Categories: Programmer socket
  • Availability: In stock
wishlist
Compare
Quickview

MINI DSG ReaderDQ200DQ250 for ReadingWriting New VWAUDI Gearbox Date

MINI DSG Reader(DQ200+DQ250) for VW/AUDI

Top 5 Reasons to Get MINI DSG:

1. Supported Language: English Only

2. MINI DSG reader is used for AUDI and VW new car. Support K-line and CAN BUS car.

3. Operating System Requirement: WIN XP System

4. After you install the software, you need to send us the ID for activation. Otherwise, it will tell " License Expired"

5. No need Activation any more.

MINI DSG Reader Description:

Usually the tool for reading/writing new VW/AUDI gearbox data is few and very expensive, now the low cost tool is coming. You don't need remove ecu from car, only connect some plug to the DSG ECU and then you can read/write and save dump to bin flie.

MINI DSG Reader Newly added car models:

AUDI Q7 BOSCH GS19 11 1MB

AUDI RS6 BOSCH GS19 2MB

AUDI S4 BOSCH GS19 04 1MB

Daewoo Lacetti Denso v2

Lotus Europa S Delco GMPT

Opel Astra G Motorola GMPT E15

Opel Astra J Delco 5[v1]

Opel Astra J Delco 5[v2]

Opel Astra J Delco 5[v4]

Opel Insignia Delco 5[V2]

Opel Insignia Delco 5[V3]

Opel Speadster Motorola GMPT E15

Opel Zafira B Delco TP

Vauxhall Astra G Motorola GMPT E15

Vauxhall Astra J Denso v1

Vauxhall Insignia Denso

Vauxhall Zafira Motorola GMPT E15

CH004371
€85.78

MINI DSG Reader(DQ200+DQ250) for Reading/Writing New VW/AUDI Gearbox Date

wishlist
Compare
Quickview

SNLINKV3 Sonix

Login to Download: Download software

Function

Debug the program with the simulation software, and support the simulation of 32bit-M0/8051/8-BIT E/mbedded ICE Series MCU.

(the simulation software must be keil mdk-armv4.53/m2ide v143 or later)

Note

Can be used with Starter kit STK_32FXXX for learning.

The self-developed Target board must pull out the SWD pin to debug with SN-LINK-V3.

Use with Starter kit STK_25EXX/26EXX/27EXX/22EXX/29EXX for learning.

The self-developed Target board must pull out EICK/EIDA pin to debug with SN-LINK-V3.

Use with Starter kit STK_57XX/58XX for learning.

The self-developed Target board must pull out the SWD pin to debug with SN-LINK-V3.

Supporting operating system: Win2000/XP-32bit/Vista-32bit/Win7-32bit/Win8.

CH004403
€61.54

SN-LINK-V3 Sonix

wishlist
Compare
Quickview

RT-Self Test Board-1 RT-Self Test Board-2 for RT809H programmer

The use of programmer selftest command,to check if there is problem itself.

Selftest way I:

Step 1 : Input the SELFTEST in the Enter chip printing,click

Step 2 : Click ,look at the hint in the display area,selftest 0 means the test pass;

Step 3 : Install the NO.1 test board and the short port of VGA ISP(short circuit the 4pins and 11pins,12pins and 15pins);

Step 4 : Click ,check the hint in the software,it will hint Selftest 1,test pass;

Step 5 : Install the NO.2 Self Test Board;

Step 6 : Click ,check the hint in the software,it will hint Selftest 2, test pass;

Selftest way II :

Step 1 : When there is no chip on the locking seat,input the type of 25XX in Enter Chip Printing;

Step 2 : Click ,it will hint that there is no chip or the locking seat hasnt been impacted well,which is normal;

If it hints that there may be a pin empty solder;

Attention : In the case of that some users have no test board,as long as the selftest 0 and 25 chip test pass,the machine is normal.

If there is other hints when doing selftest 0,the way to deal with it could be as following:

The problem of connection with computer and the programmer,please step-by examine according to the hint of failure process;

Hardware trouble like pin electric leakage,problems inside the pins,VPP open circuit,GND open circuit,VPP short circuit,VCC short circuit,GND short circuit,VPP protection not shut off,which must be returned to factory to repair.

CH004408
€4.97

RT-SelfTestBoard-1 RT-SelfTestBoard-2 for RT809H programmer

wishlist
Compare
Quickview

TI USB20 DSP Emulator XDS100 V2 DSPARM Core Emulator CCS4 CCS5 64bit

Features:

- USB2.0 high speed port(480Mbit/s)

- 14PIN standard JTAG port, support TI core processor

- Support multi processorss: TMS320C28x, TMS320C54x, TMS320C55x, TMS320C64x+, TMS320C674x, ARM 9, ARM Cortex R4, ARM Cortex A8

- Support power off detection

- Support FTDI device drive

- Support time self adaption

- Support Code Composer Studio v4 or above

- Support LED light display control USB connection

Operation System:

- Windows 2000

- Windows XP

- Windows Vista

- Windows 7

Package Included:

- 1* XDS100 V2 Emulator

- 1* USB 2.0 Cable

- 1* 14Pin flat cable

CH004499
€28.60

TI USB2.0 DSP Emulator XDS100 V2 DSP/ARM Core Emulator CCS4 CCS5 64bit

wishlist
Compare
Quickview

OBD2 Pin Out Box Breakout Box Tester OBD II Pin Connector Covere All Test Points

Obd2 Pin Out Box Breakout Box Tester Diagnostic Obd2 Pin Connector Covere All Test Points

Description:

This tool is used to change the pin settings of other diagnostic tools/scanners without the needs to cut the connecting cable for re-wiring. You can also quickly switch between different terminals of your vehicle's OBD socket when using beta software/hardware. Comes with a quality lead with 16 pins wired. With a 16 pin female OBD connector, 16 pin male OBD connector and 15 pin D plug to connect to the breakout box.

Features:

All test points covered.

Allows monitoring of any OBD2 diagnostic systems.

Quickly switch data points without soldering.

Ideal for checking vehicle\'s diagnostic status.

Package list:

1 x OBD Breakout box with all test points.

1 x Cable

CH004518
€24.86

OBD2 Pin Out Box Breakout Box Tester OBD II Pin Connector Covere All Test Points

wishlist
Compare
Quickview

6pcs SOP4SOP28 TSSOP4TSSOP28 SMD to DIP Board for RT80x809F TL866II TL866A TL866CS TNM5000 6100N 610P XELTEK

SOP4-SOP28 SSOP4-TSSOP28 SMD to DIP Adapter Board (pin spacing 0.65mm/1.27mm)

Specific size chart:

Please check carefully before the size of the board for the pros and Cons: one side is applicable to the pin spacing 0.65mm (compatible with SSOP4~24 feet); the other side is applicable to the pin spacing 1.27mm (compatible with SOP4~24 feet)

HK000031
€6.80

6pcs SOP4-SOP28 TSSOP4-TSSOP28 SMD to DIP Board for RT809H RT809F TL866II TL866A TL866CS TNM5000 6100N 610P XELTEK

MINI DSG ReaderDQ200DQ250 for ReadingWriting New VWAUDI Gearbox Date

MINI DSG Reader(DQ200+DQ250) for VW/AUDI

Top 5 Reasons to Get MINI DSG:

1. Supported Language: English Only

2. MINI DSG reader is used for AUDI and VW new car. Support K-line and CAN BUS car.

3. Operating System Requirement: WIN XP System

4. After you install the software, you need to send us the ID for activation. Otherwise, it will tell " License Expired"

5. No need Activation any more.

MINI DSG Reader Description:

Usually the tool for reading/writing new VW/AUDI gearbox data is few and very expensive, now the low cost tool is coming. You don't need remove ecu from car, only connect some plug to the DSG ECU and then you can read/write and save dump to bin flie.

MINI DSG Reader Newly added car models:

AUDI Q7 BOSCH GS19 11 1MB

AUDI RS6 BOSCH GS19 2MB

AUDI S4 BOSCH GS19 04 1MB

Daewoo Lacetti Denso v2

Lotus Europa S Delco GMPT

Opel Astra G Motorola GMPT E15

Opel Astra J Delco 5[v1]

Opel Astra J Delco 5[v2]

Opel Astra J Delco 5[v4]

Opel Insignia Delco 5[V2]

Opel Insignia Delco 5[V3]

Opel Speadster Motorola GMPT E15

Opel Zafira B Delco TP

Vauxhall Astra G Motorola GMPT E15

Vauxhall Astra J Denso v1

Vauxhall Insignia Denso

Vauxhall Zafira Motorola GMPT E15

CH004371
€85.78

MINI DSG Reader(DQ200+DQ250) for Reading/Writing New VW/AUDI Gearbox Date

wishlist
Compare

SNLINKV3 Sonix

Login to Download: Download software

Function

Debug the program with the simulation software, and support the simulation of 32bit-M0/8051/8-BIT E/mbedded ICE Series MCU.

(the simulation software must be keil mdk-armv4.53/m2ide v143 or later)

Note

Can be used with Starter kit STK_32FXXX for learning.

The self-developed Target board must pull out the SWD pin to debug with SN-LINK-V3.

Use with Starter kit STK_25EXX/26EXX/27EXX/22EXX/29EXX for learning.

The self-developed Target board must pull out EICK/EIDA pin to debug with SN-LINK-V3.

Use with Starter kit STK_57XX/58XX for learning.

The self-developed Target board must pull out the SWD pin to debug with SN-LINK-V3.

Supporting operating system: Win2000/XP-32bit/Vista-32bit/Win7-32bit/Win8.

CH004403
€61.54

SN-LINK-V3 Sonix

wishlist
Compare

RT-Self Test Board-1 RT-Self Test Board-2 for RT809H programmer

The use of programmer selftest command,to check if there is problem itself.

Selftest way I:

Step 1 : Input the SELFTEST in the Enter chip printing,click

Step 2 : Click ,look at the hint in the display area,selftest 0 means the test pass;

Step 3 : Install the NO.1 test board and the short port of VGA ISP(short circuit the 4pins and 11pins,12pins and 15pins);

Step 4 : Click ,check the hint in the software,it will hint Selftest 1,test pass;

Step 5 : Install the NO.2 Self Test Board;

Step 6 : Click ,check the hint in the software,it will hint Selftest 2, test pass;

Selftest way II :

Step 1 : When there is no chip on the locking seat,input the type of 25XX in Enter Chip Printing;

Step 2 : Click ,it will hint that there is no chip or the locking seat hasnt been impacted well,which is normal;

If it hints that there may be a pin empty solder;

Attention : In the case of that some users have no test board,as long as the selftest 0 and 25 chip test pass,the machine is normal.

If there is other hints when doing selftest 0,the way to deal with it could be as following:

The problem of connection with computer and the programmer,please step-by examine according to the hint of failure process;

Hardware trouble like pin electric leakage,problems inside the pins,VPP open circuit,GND open circuit,VPP short circuit,VCC short circuit,GND short circuit,VPP protection not shut off,which must be returned to factory to repair.

CH004408
€4.97

RT-SelfTestBoard-1 RT-SelfTestBoard-2 for RT809H programmer

wishlist
Compare

TI USB20 DSP Emulator XDS100 V2 DSPARM Core Emulator CCS4 CCS5 64bit

Features:

- USB2.0 high speed port(480Mbit/s)

- 14PIN standard JTAG port, support TI core processor

- Support multi processorss: TMS320C28x, TMS320C54x, TMS320C55x, TMS320C64x+, TMS320C674x, ARM 9, ARM Cortex R4, ARM Cortex A8

- Support power off detection

- Support FTDI device drive

- Support time self adaption

- Support Code Composer Studio v4 or above

- Support LED light display control USB connection

Operation System:

- Windows 2000

- Windows XP

- Windows Vista

- Windows 7

Package Included:

- 1* XDS100 V2 Emulator

- 1* USB 2.0 Cable

- 1* 14Pin flat cable

CH004499
€28.60

TI USB2.0 DSP Emulator XDS100 V2 DSP/ARM Core Emulator CCS4 CCS5 64bit

wishlist
Compare

OBD2 Pin Out Box Breakout Box Tester OBD II Pin Connector Covere All Test Points

Obd2 Pin Out Box Breakout Box Tester Diagnostic Obd2 Pin Connector Covere All Test Points

Description:

This tool is used to change the pin settings of other diagnostic tools/scanners without the needs to cut the connecting cable for re-wiring. You can also quickly switch between different terminals of your vehicle's OBD socket when using beta software/hardware. Comes with a quality lead with 16 pins wired. With a 16 pin female OBD connector, 16 pin male OBD connector and 15 pin D plug to connect to the breakout box.

Features:

All test points covered.

Allows monitoring of any OBD2 diagnostic systems.

Quickly switch data points without soldering.

Ideal for checking vehicle\'s diagnostic status.

Package list:

1 x OBD Breakout box with all test points.

1 x Cable

CH004518
€24.86

OBD2 Pin Out Box Breakout Box Tester OBD II Pin Connector Covere All Test Points

wishlist
Compare

Universal IC Socket Adapter SSOP20 TO DIP20 SSOP16 TO DIP16 SSOP14 220mil

Universal IC Socket SSOP20 seat (0.65 spacing), has a long service life, suitable for all SSOP20 SSOP16 SSOP14 chip.

The suitable model and programmer. Such as: ALL-100GANG, ALL-11 series, LT-48 series, SuperPRO series, TOP series programmer all

Support: suitable for all SSOPS20 chip packaging base

CH004550
€6.84

Universal IC Socket Adapter SSOP20 TO DIP20 / SSOP16 TO DIP16 / SSOP14 (220mil)

wishlist
Compare

6pcs SOP4SOP28 TSSOP4TSSOP28 SMD to DIP Board for RT80x809F TL866II TL866A TL866CS TNM5000 6100N 610P XELTEK

SOP4-SOP28 SSOP4-TSSOP28 SMD to DIP Adapter Board (pin spacing 0.65mm/1.27mm)

Specific size chart:

Please check carefully before the size of the board for the pros and Cons: one side is applicable to the pin spacing 0.65mm (compatible with SSOP4~24 feet); the other side is applicable to the pin spacing 1.27mm (compatible with SOP4~24 feet)

HK000031
€6.80

6pcs SOP4-SOP28 TSSOP4-TSSOP28 SMD to DIP Board for RT809H RT809F TL866II TL866A TL866CS TNM5000 6100N 610P XELTEK

wishlist
Compare
Back to top