• Show Sidebar

There are 342 products.

Active filters

  • Categories: Programmer
  • Categories: Programmer & Sockets
  • Categories: Programmer socket
  • Availability: In stock
  • Condition: New
wishlist
Compare
Quickview

RT-Self Test Board-1 RT-Self Test Board-2 for RT809H programmer

The use of programmer selftest command,to check if there is problem itself.

Selftest way I:

Step 1 : Input the SELFTEST in the Enter chip printing,click

Step 2 : Click ,look at the hint in the display area,selftest 0 means the test pass;

Step 3 : Install the NO.1 test board and the short port of VGA ISP(short circuit the 4pins and 11pins,12pins and 15pins);

Step 4 : Click ,check the hint in the software,it will hint Selftest 1,test pass;

Step 5 : Install the NO.2 Self Test Board;

Step 6 : Click ,check the hint in the software,it will hint Selftest 2, test pass;

Selftest way II :

Step 1 : When there is no chip on the locking seat,input the type of 25XX in Enter Chip Printing;

Step 2 : Click ,it will hint that there is no chip or the locking seat hasnt been impacted well,which is normal;

If it hints that there may be a pin empty solder;

Attention : In the case of that some users have no test board,as long as the selftest 0 and 25 chip test pass,the machine is normal.

If there is other hints when doing selftest 0,the way to deal with it could be as following:

The problem of connection with computer and the programmer,please step-by examine according to the hint of failure process;

Hardware trouble like pin electric leakage,problems inside the pins,VPP open circuit,GND open circuit,VPP short circuit,VCC short circuit,GND short circuit,VPP protection not shut off,which must be returned to factory to repair.

CH004408
€4.97

RT-SelfTestBoard-1 RT-SelfTestBoard-2 for RT809H programmer

wishlist
Compare
Quickview

TI USB20 DSP Emulator XDS100 V2 DSPARM Core Emulator CCS4 CCS5 64bit

Features:

- USB2.0 high speed port(480Mbit/s)

- 14PIN standard JTAG port, support TI core processor

- Support multi processorss: TMS320C28x, TMS320C54x, TMS320C55x, TMS320C64x+, TMS320C674x, ARM 9, ARM Cortex R4, ARM Cortex A8

- Support power off detection

- Support FTDI device drive

- Support time self adaption

- Support Code Composer Studio v4 or above

- Support LED light display control USB connection

Operation System:

- Windows 2000

- Windows XP

- Windows Vista

- Windows 7

Package Included:

- 1* XDS100 V2 Emulator

- 1* USB 2.0 Cable

- 1* 14Pin flat cable

CH004499
€28.60

TI USB2.0 DSP Emulator XDS100 V2 DSP/ARM Core Emulator CCS4 CCS5 64bit

wishlist
Compare
Quickview

OBD2 Pin Out Box Breakout Box Tester OBD II Pin Connector Covere All Test Points

Obd2 Pin Out Box Breakout Box Tester Diagnostic Obd2 Pin Connector Covere All Test Points

Description:

This tool is used to change the pin settings of other diagnostic tools/scanners without the needs to cut the connecting cable for re-wiring. You can also quickly switch between different terminals of your vehicle's OBD socket when using beta software/hardware. Comes with a quality lead with 16 pins wired. With a 16 pin female OBD connector, 16 pin male OBD connector and 15 pin D plug to connect to the breakout box.

Features:

All test points covered.

Allows monitoring of any OBD2 diagnostic systems.

Quickly switch data points without soldering.

Ideal for checking vehicle\'s diagnostic status.

Package list:

1 x OBD Breakout box with all test points.

1 x Cable

CH004518
€24.86

OBD2 Pin Out Box Breakout Box Tester OBD II Pin Connector Covere All Test Points

wishlist
Compare
Quickview

6pcs SOP4SOP28 TSSOP4TSSOP28 SMD to DIP Board for RT80x809F TL866II TL866A TL866CS TNM5000 6100N 610P XELTEK

SOP4-SOP28 SSOP4-TSSOP28 SMD to DIP Adapter Board (pin spacing 0.65mm/1.27mm)

Specific size chart:

Please check carefully before the size of the board for the pros and Cons: one side is applicable to the pin spacing 0.65mm (compatible with SSOP4~24 feet); the other side is applicable to the pin spacing 1.27mm (compatible with SOP4~24 feet)

HK000031
€6.80

6pcs SOP4-SOP28 TSSOP4-TSSOP28 SMD to DIP Board for RT809H RT809F TL866II TL866A TL866CS TNM5000 6100N 610P XELTEK

wishlist
Compare
Quickview

CANalystII USB to CAN Analyzer CANBUS Converter Adapter Support ZLGCANpro

CANalyst-II USB to CAN Analyzer CAN-BUS Converter Software

Login to Download: Download software

Description:

USB and CAN-bus protocol conversion;

USB-CAN-1(x) is signal channel intelligent CAN interface module;

USB-CAN-2(x) is dual-channel intelligent CAN interface module;

CANalyst-II Analyzer is dual-channel intelligent CAN interface module with CAN-bus protocol analysis capabilities;

PC interface supports USB1.1 protocol and is USB 2.0 compliant;

Supports CAN2.0A and CAN2.0B protocols supports standard and extended frame;

Support CAN transmit and CAN Receive;

Support data frame and remote frame;

Programmable CAN-bus communication Baud rates from 10Kbps to 1Mbps;

USB-CAN-(x)A products:not isolated in the CAN-bus terminal;

USB-CAN-(x)B /C products: isolated with independently isolated DC-DC power module and High-speed magnetic coupling isolation module in the CAN-bus terminal;

CANalyst-II Analyzer: isolated with independently isolated DC-DC power module and High-speed magnetic coupling isolation module in the CAN-bus terminal;

Max data flow for a single channel: 8000 fps (standard frame) for receiving and 8000 fps(standard frame) for transmitting;

Buffer size:1000 frames length buffer for transmit(with auto repeat transmit when failed) per channel,2000 frames length for receive per channel;

Adopts USB bus power supply, eliminating the need for an external power supply;

USB-CAN-(x)A products,no electrical isolation;

USB-CAN-(x)B products, adopts electrical isolation, the isolation voltage is : 1000V;

USB-CAN-(x)C products, adopts electrical isolation, the isolation voltage is : 2500V;

CANalyst-II Analyzer, adopts electrical isolation, the isolation voltage is:2500V;

Operating temperature: -20 ~ 85 ?;

Physical size: (length) 70mm * (width) 45mm * (height) 24mm;

Product compatibility:Function library is similar to the library in Guangzhou ZLG USBCAN interface module.

Typical applications:

Transmit or receive massages in CAN-bus network with PC or laptop's USB;

The fast CAN network data collection, data analysis;

CAN-bus-USB gateway;

USB interface to CAN network interface;

Extend CAN-bus line length;

Industrial site CAN network data monitoring.

Include:

1 x USB-CAN Analyzer

1 x USB Cable

CH004599
€74.59

CANalyst-II USB to CAN Analyzer CAN-BUS Converter Adapter Support ZLGCANpro

RT-Self Test Board-1 RT-Self Test Board-2 for RT809H programmer

The use of programmer selftest command,to check if there is problem itself.

Selftest way I:

Step 1 : Input the SELFTEST in the Enter chip printing,click

Step 2 : Click ,look at the hint in the display area,selftest 0 means the test pass;

Step 3 : Install the NO.1 test board and the short port of VGA ISP(short circuit the 4pins and 11pins,12pins and 15pins);

Step 4 : Click ,check the hint in the software,it will hint Selftest 1,test pass;

Step 5 : Install the NO.2 Self Test Board;

Step 6 : Click ,check the hint in the software,it will hint Selftest 2, test pass;

Selftest way II :

Step 1 : When there is no chip on the locking seat,input the type of 25XX in Enter Chip Printing;

Step 2 : Click ,it will hint that there is no chip or the locking seat hasnt been impacted well,which is normal;

If it hints that there may be a pin empty solder;

Attention : In the case of that some users have no test board,as long as the selftest 0 and 25 chip test pass,the machine is normal.

If there is other hints when doing selftest 0,the way to deal with it could be as following:

The problem of connection with computer and the programmer,please step-by examine according to the hint of failure process;

Hardware trouble like pin electric leakage,problems inside the pins,VPP open circuit,GND open circuit,VPP short circuit,VCC short circuit,GND short circuit,VPP protection not shut off,which must be returned to factory to repair.

CH004408
€4.97

RT-SelfTestBoard-1 RT-SelfTestBoard-2 for RT809H programmer

wishlist
Compare

TI USB20 DSP Emulator XDS100 V2 DSPARM Core Emulator CCS4 CCS5 64bit

Features:

- USB2.0 high speed port(480Mbit/s)

- 14PIN standard JTAG port, support TI core processor

- Support multi processorss: TMS320C28x, TMS320C54x, TMS320C55x, TMS320C64x+, TMS320C674x, ARM 9, ARM Cortex R4, ARM Cortex A8

- Support power off detection

- Support FTDI device drive

- Support time self adaption

- Support Code Composer Studio v4 or above

- Support LED light display control USB connection

Operation System:

- Windows 2000

- Windows XP

- Windows Vista

- Windows 7

Package Included:

- 1* XDS100 V2 Emulator

- 1* USB 2.0 Cable

- 1* 14Pin flat cable

CH004499
€28.60

TI USB2.0 DSP Emulator XDS100 V2 DSP/ARM Core Emulator CCS4 CCS5 64bit

wishlist
Compare

OBD2 Pin Out Box Breakout Box Tester OBD II Pin Connector Covere All Test Points

Obd2 Pin Out Box Breakout Box Tester Diagnostic Obd2 Pin Connector Covere All Test Points

Description:

This tool is used to change the pin settings of other diagnostic tools/scanners without the needs to cut the connecting cable for re-wiring. You can also quickly switch between different terminals of your vehicle's OBD socket when using beta software/hardware. Comes with a quality lead with 16 pins wired. With a 16 pin female OBD connector, 16 pin male OBD connector and 15 pin D plug to connect to the breakout box.

Features:

All test points covered.

Allows monitoring of any OBD2 diagnostic systems.

Quickly switch data points without soldering.

Ideal for checking vehicle\'s diagnostic status.

Package list:

1 x OBD Breakout box with all test points.

1 x Cable

CH004518
€24.86

OBD2 Pin Out Box Breakout Box Tester OBD II Pin Connector Covere All Test Points

wishlist
Compare

Universal IC Socket Adapter SSOP20 TO DIP20 SSOP16 TO DIP16 SSOP14 220mil

Universal IC Socket SSOP20 seat (0.65 spacing), has a long service life, suitable for all SSOP20 SSOP16 SSOP14 chip.

The suitable model and programmer. Such as: ALL-100GANG, ALL-11 series, LT-48 series, SuperPRO series, TOP series programmer all

Support: suitable for all SSOPS20 chip packaging base

CH004550
€6.84

Universal IC Socket Adapter SSOP20 TO DIP20 / SSOP16 TO DIP16 / SSOP14 (220mil)

wishlist
Compare

6pcs SOP4SOP28 TSSOP4TSSOP28 SMD to DIP Board for RT80x809F TL866II TL866A TL866CS TNM5000 6100N 610P XELTEK

SOP4-SOP28 SSOP4-TSSOP28 SMD to DIP Adapter Board (pin spacing 0.65mm/1.27mm)

Specific size chart:

Please check carefully before the size of the board for the pros and Cons: one side is applicable to the pin spacing 0.65mm (compatible with SSOP4~24 feet); the other side is applicable to the pin spacing 1.27mm (compatible with SOP4~24 feet)

HK000031
€6.80

6pcs SOP4-SOP28 TSSOP4-TSSOP28 SMD to DIP Board for RT809H RT809F TL866II TL866A TL866CS TNM5000 6100N 610P XELTEK

wishlist
Compare

CANalystII USB to CAN Analyzer CANBUS Converter Adapter Support ZLGCANpro

CANalyst-II USB to CAN Analyzer CAN-BUS Converter Software

Login to Download: Download software

Description:

USB and CAN-bus protocol conversion;

USB-CAN-1(x) is signal channel intelligent CAN interface module;

USB-CAN-2(x) is dual-channel intelligent CAN interface module;

CANalyst-II Analyzer is dual-channel intelligent CAN interface module with CAN-bus protocol analysis capabilities;

PC interface supports USB1.1 protocol and is USB 2.0 compliant;

Supports CAN2.0A and CAN2.0B protocols supports standard and extended frame;

Support CAN transmit and CAN Receive;

Support data frame and remote frame;

Programmable CAN-bus communication Baud rates from 10Kbps to 1Mbps;

USB-CAN-(x)A products:not isolated in the CAN-bus terminal;

USB-CAN-(x)B /C products: isolated with independently isolated DC-DC power module and High-speed magnetic coupling isolation module in the CAN-bus terminal;

CANalyst-II Analyzer: isolated with independently isolated DC-DC power module and High-speed magnetic coupling isolation module in the CAN-bus terminal;

Max data flow for a single channel: 8000 fps (standard frame) for receiving and 8000 fps(standard frame) for transmitting;

Buffer size:1000 frames length buffer for transmit(with auto repeat transmit when failed) per channel,2000 frames length for receive per channel;

Adopts USB bus power supply, eliminating the need for an external power supply;

USB-CAN-(x)A products,no electrical isolation;

USB-CAN-(x)B products, adopts electrical isolation, the isolation voltage is : 1000V;

USB-CAN-(x)C products, adopts electrical isolation, the isolation voltage is : 2500V;

CANalyst-II Analyzer, adopts electrical isolation, the isolation voltage is:2500V;

Operating temperature: -20 ~ 85 ?;

Physical size: (length) 70mm * (width) 45mm * (height) 24mm;

Product compatibility:Function library is similar to the library in Guangzhou ZLG USBCAN interface module.

Typical applications:

Transmit or receive massages in CAN-bus network with PC or laptop's USB;

The fast CAN network data collection, data analysis;

CAN-bus-USB gateway;

USB interface to CAN network interface;

Extend CAN-bus line length;

Industrial site CAN network data monitoring.

Include:

1 x USB-CAN Analyzer

1 x USB Cable

CH004599
€74.59

CANalyst-II USB to CAN Analyzer CAN-BUS Converter Adapter Support ZLGCANpro

wishlist
Compare
Back to top