• Show Sidebar

There are 1020 products.

Active filters

  • Categories: EFI Rom Cable
  • Categories: Laptop Parts, Repair tool
  • Categories: Programmer & Sockets
  • Categories: Programmer socket
wishlist
Compare
Quickview

STXRLINK STM8 ST7 STM32 STR7 STR9 Incircuit Debugger Programmer Supporting JTAG and ICC Protocols

STX-RLINK is adapted for the St series MCU a versatile Tools for Economic Development. It can be downloaded on line simulation and St stm8, ST7, STM32, str7 and str9 Family of devices.

Software supported

The direct support of ride7 raisonance and rflasher7.

Official St IDE (Integrated Development Environment software) ST (STVD) visual Development and visual recording software program (St stvp).

Compatible Devices

Swim interface with support for all the stm8 MCU

Supports all ST7 MCU interface with ICC

With JTAG interface supports all str7 / SWD STM32 MCU, and str9

Functionality, performance

Functions of programming: The Programming of Flash ROM, EEPROM, etc.

The Simulation Capabilities: support to run at full speed, stepping, breakpoints, and another method of Cleansing, you can see the State of the variable Data, etc.

Simulation of Performance debugging Simulation: USB2.0 interface, Step by step, breakpoints, Rapid Response!

Program Performance: USB2.0 interface to swim / ICC / / SWD JTAG download, download speed!

Special Note: STX RLINK can't Trace. Original explained as follows:

The RLINK includes no support for Tracing devices based on arm kernel and Trace macrocell with Embedded System such as str9. With the capacity of monitoring tools are available in the str9 Professional Developer Kit (DK / raisonance str9 - Signum jtagjet RAIS), and in the str91x Advanced Developer's kit (IAR str91xdk / IAR) with J Trace.

Using the USB Interface to connect the PC

STX RLINK Integrated Development Tools, drivers, USB high speed communication.

Upgradeable firmware

In the Future, will launch more St stm8, ST7, STM32, str7 and str9 Models, the new device is added to the list of compatible devices and ride7 STVD Model, when you need to use in the future development of new models, and updates ride7 STVD, Firmware Update, should be supported by new models

Package Contains:

STX RLINK x 1

USB type B type cable x 1

Swim cable x 1

ICC / 4 - pin Adapter Adapter x 1 swim

JTAG Adapter x 1

SWD 20 pin JTAG - x 1

Does not contain CD software program

CH002083
€171.56

STX-RLINK STM8 ST7 STM32 STR7 STR9 In-circuit Debugger Programmer Supporting JTAG and ICC Protocols

wishlist
Compare
Quickview

TQFP44 to DIP44 Programmer Adapter Socket for RT809H TNM5000 T56 programmer

CHIP PROGRAMMER SOCKET TQFP44 TO DIP44 adapter socket support ATMEGA8 series

Description:

Best quality, QFP44 to 44Dip Adapter

Suitable for QFP44 IC

patch size : 0.8mm 10mm * 10mm

Feature:

Support Atmel Atmega TQFP44 device

eg.mega328 mega8A mega48 mega8 mega88 mega16 mega162 mega168

Comes with AVRISP header, directly connect to AVRISP, USBASP, MkII, for direct burning of firmware or arduino bootloaders

Crysal header so that crystal can be replaced easily

Convert to DIP44 Atmega328 format, Pin to pin comptabile with Atmega DIP44 MCU format

Package included:

Programmer Adapter QFP44 to DIP44

Note:

Type A: Use for XELTEK USB Programmer - Overlapping

Type B: Use for RT809H TNM5000 Programmer - Pin to Pin

CH002085
€28.00

TQFP44 to DIP44 Programmer Adapter Socket for RT809H TNM5000 T56 programmer

wishlist
Compare
Quickview

FX150 Conductor Wire 002mm

FX-150 Conductor Wire 0.02mm

Tracking Line conductor

Description:

Brand New and high quality!

150 m / Roll of 0.02mm Copper Welding Wire

Can be used to connect Jump cable for Computer and Mobile Phone Repair Base Plate

There is no need to remove the Lacquer, Direct welding

Specification:

Material: Copper

Diameter: 0.02mm

Gross Weight: 12.20g

Storage: on

Please use a small bag deoxidizer and a desiccant sealed if long time no use

What's in the package:

1 Roll (150 m) * 0.02mm Copper Welding Wire (Vacuum sealed)

CH001049
€7.34

FX-150 Conductor Wire 0.02mm

STXRLINK STM8 ST7 STM32 STR7 STR9 Incircuit Debugger Programmer Supporting JTAG and ICC Protocols

STX-RLINK is adapted for the St series MCU a versatile Tools for Economic Development. It can be downloaded on line simulation and St stm8, ST7, STM32, str7 and str9 Family of devices.

Software supported

The direct support of ride7 raisonance and rflasher7.

Official St IDE (Integrated Development Environment software) ST (STVD) visual Development and visual recording software program (St stvp).

Compatible Devices

Swim interface with support for all the stm8 MCU

Supports all ST7 MCU interface with ICC

With JTAG interface supports all str7 / SWD STM32 MCU, and str9

Functionality, performance

Functions of programming: The Programming of Flash ROM, EEPROM, etc.

The Simulation Capabilities: support to run at full speed, stepping, breakpoints, and another method of Cleansing, you can see the State of the variable Data, etc.

Simulation of Performance debugging Simulation: USB2.0 interface, Step by step, breakpoints, Rapid Response!

Program Performance: USB2.0 interface to swim / ICC / / SWD JTAG download, download speed!

Special Note: STX RLINK can't Trace. Original explained as follows:

The RLINK includes no support for Tracing devices based on arm kernel and Trace macrocell with Embedded System such as str9. With the capacity of monitoring tools are available in the str9 Professional Developer Kit (DK / raisonance str9 - Signum jtagjet RAIS), and in the str91x Advanced Developer's kit (IAR str91xdk / IAR) with J Trace.

Using the USB Interface to connect the PC

STX RLINK Integrated Development Tools, drivers, USB high speed communication.

Upgradeable firmware

In the Future, will launch more St stm8, ST7, STM32, str7 and str9 Models, the new device is added to the list of compatible devices and ride7 STVD Model, when you need to use in the future development of new models, and updates ride7 STVD, Firmware Update, should be supported by new models

Package Contains:

STX RLINK x 1

USB type B type cable x 1

Swim cable x 1

ICC / 4 - pin Adapter Adapter x 1 swim

JTAG Adapter x 1

SWD 20 pin JTAG - x 1

Does not contain CD software program

CH002083
€171.56

STX-RLINK STM8 ST7 STM32 STR7 STR9 In-circuit Debugger Programmer Supporting JTAG and ICC Protocols

wishlist
Compare

TQFP44 to DIP44 Programmer Adapter Socket for RT809H TNM5000 T56 programmer

CHIP PROGRAMMER SOCKET TQFP44 TO DIP44 adapter socket support ATMEGA8 series

Description:

Best quality, QFP44 to 44Dip Adapter

Suitable for QFP44 IC

patch size : 0.8mm 10mm * 10mm

Feature:

Support Atmel Atmega TQFP44 device

eg.mega328 mega8A mega48 mega8 mega88 mega16 mega162 mega168

Comes with AVRISP header, directly connect to AVRISP, USBASP, MkII, for direct burning of firmware or arduino bootloaders

Crysal header so that crystal can be replaced easily

Convert to DIP44 Atmega328 format, Pin to pin comptabile with Atmega DIP44 MCU format

Package included:

Programmer Adapter QFP44 to DIP44

Note:

Type A: Use for XELTEK USB Programmer - Overlapping

Type B: Use for RT809H TNM5000 Programmer - Pin to Pin

CH002085
€28.00

TQFP44 to DIP44 Programmer Adapter Socket for RT809H TNM5000 T56 programmer

wishlist
Compare

FX150 Conductor Wire 002mm

FX-150 Conductor Wire 0.02mm

Tracking Line conductor

Description:

Brand New and high quality!

150 m / Roll of 0.02mm Copper Welding Wire

Can be used to connect Jump cable for Computer and Mobile Phone Repair Base Plate

There is no need to remove the Lacquer, Direct welding

Specification:

Material: Copper

Diameter: 0.02mm

Gross Weight: 12.20g

Storage: on

Please use a small bag deoxidizer and a desiccant sealed if long time no use

What's in the package:

1 Roll (150 m) * 0.02mm Copper Welding Wire (Vacuum sealed)

CH001049
€7.34

FX-150 Conductor Wire 0.02mm

wishlist
Compare
Back to top