DX1045 Adapter for XELTEK SuperPro 6100N

ES120 plus somatosensory electric screwdriver.

Standard configuration: Motor host x1, S2 steel batch head x16, warranty card and manual x1.

Operation introduction of electric screwdriver: press and hold the work button, and then swing your hand to the left / right to start the forward and reverse rotation (circle swing on the left and right planes). It's not overwhelming. Press the work button three times in a row to enter different torque gear settings and set the appropriate torque gear. (4 gears: a automatic gear and 3 fixed torque and speed gears: H / M / L = high / medium / low). The speed of M / h / L is the same, 170 rpm. H torque is large, m torque is medium, l torque is small.

--------------------------------------------------------------------------------------------------------------------------

Es120plus body feeling precision electric screwdriver.

The design orientation of es120plus is very clear. Medium speed, medium and large torque, for the disassembly and assembly requirements of screws within 5mm and 5mm (non self tapping screws, non large electrical screws, non mechanical equipment steel screws, these equipment screws are not suitable for use. )Applicable to electronic products, bolts, nuts and fasteners made of steel, aluminum and plastic. According to his design orientation, suitable for: desktop small electrical appliances small furniture mobile phone digital flat camera notebook glasses toy model aircraft model UAV electronic digital products disassembly maintenance disassembly screw use. High speed, small, medium and large torque can be set to avoid screw breakage, safe and practical. Moreover, some special fastening screws can be directly operated by hand, which can withstand 30 KGF.CM Peak torque.

(1) The fuselage is made of 304 stainless steel with strong texture, good handle, exquisite workmanship and strong durability.

(2) The built-in lithium battery can be used for charging or charging at the same time.

(3) Hand self integrated protection design: not only can be used independently, but also can be used independently and manually, and can be used at the same time.

(4) 3 fixed torque + a automatic gear design, to meet the torque requirements of small and medium sized screws in different equipment.

(5) With somatosensory chip, it can control forward and reverse rotation according to gesture swing direction. In a automatic gear, it can automatically control speed and torque through gesture swing speed (realize stepless speed change and stepless torque adjustment).

(6) Using high-speed motor, about 170 rpm, enough to meet the speed and efficiency needs of mobile phone digital toys, flat glasses camera, UAV model aircraft, notebook personal maintenance and dismantling customers (the speed of similar electric screwdriver is about 100 RPM).

(7) Electric high torque 2.5 kgf.cm The manual torque is too large to bear the torque of 30 kgf.cm

(8) The internal firmware can be upgraded, and the firmware can be downloaded from the factory official forum to update the new version of firmware. Moreover, users with programming ability can increase the torque gear and adjust the torque by themselves. Open source design, very user-friendly

Default configuration:

13*10.5mm

TMS91429CT New Inverter Transformer for SAMSUNG 943NW 953BW

Part Number TMS91429CT Pin Distance 24*17mm

Size 29*55mm Total 6+4 PIN

Weight 30g Description Bulk new

Model: CX3002/DX3002/EX3002/GX3002

Description: QFP44

Model number: T-FLEX700

Size: 15mm*15mm*1.5mmT

Temperature resistance: -40~220?

Thermal conductivity: 5.0W/mk

Thermal resistance coefficient: 0.15?-in/W

Density: 1.73g/cc

RT809H special seat mobile phone EMMC jumping seat EMMC221 adapter seat reading and writing seat mobile phone repair seat

Limit frame specification: 11.5*13mm

Buy Limit Frame: * 11*10mm, 12*16mm, 14*18mm

DX3055 ADAPTER FOR XELTEK SUPERPRO 6100N

Taiwan lead-free high quality 936 iron head

Characteristic:

1. special cast iron process, corrosion resistance, oxidation resistance, especially for long life.

2. strong immersion prolonged, easy to melt, Shangxi, solder joint round.

3. ? uniform inductance, stable quality, lead-free material.

4. lead-free environmental production, has passed the SGS test.

All soldering stations used in the 900M-T series

Such as table machine, 936 series welding platform

900M series lead-free soldering iron

? made of pure copper components, high thermal conductivity, fast heat transfer

? special iron surface plating, high temperature resistance, corrosion resistance

Special process, suitable for lead-free solder welding

? strong tin capacity, no oxidation, no tin, no tin, tin climbing phenomenon

? the outer layer is bright and delicate and very strong in rust resistance

? this product has passed the SGS environmental protection test

Life of soldering iron head

The life of the iron head is determined by the number of welds, and the length of life guaranteed depends on the coating thickness of the head. The thicker the coating, the longer the life of the iron head, but the heat transfer efficiency will be greatly reduced, the life of the iron tip for the same temperature series of iron head, fine iron head, life expectancy than a rough iron head life is shorter. Because the iron head is working, it will inevitably cause wear and tear on the surface of the nozzle life. Therefore, the fine iron head is more prone to wear, so to reduce the life of the soldering iron.

Maintenance of iron head

The use of new electric iron, electric iron can not bring the new use, need to be plated with a layer of solder in the iron head method is: according to the power supply when the temperature gradually increased, the rosin coated iron head; rosin smoke, to melt the solder iron head, with a the solder layer so as to strengthen the tip life.

250K PMTC 0.35mm BGA No Pb/Lead Free Solder Balls

Part Number 0.35mm BGA Solder Balls Manufacturer PMTC

BGA Alloy No Pb/Lead Free Date Code 19+

Package/Case 250K Description Brand New

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

Multi-function SOIC16 SOP16 SOP8 To DIP8 CLIP for RT809H RT809F TL866CS TL866A TL866II EZP2010 EZP2013 TNM5000 SoFi-SP8 SoFi-SP16

Cable Size: 30CM

SPI FLASH chip SOP8 and SOP16 connection

A lot of new types of notebook and router is currently using 25 SPI memory chip, SOP16 chip package, such as MX25L3205 chip; although many programmers can support MX25L3205 chip, but it is the MX25L3205 chip supports SOP8 package, the MX25L3205 chip does not directly support the SOP16 package; and the adapter chip are not the same. One is 8 feet, one is 16 feet. So, is it possible to program SOP15 MX25L3205 chips in a simple way? In fact, the process is simple, because the 25 SPI chip SOP8 and SOP16 package chip, the definition of the corresponding foot is the same, as long as the corresponding SOP16 feet and SOP8 feet corresponding connection, the operating process can be used SOP8 MX25L3205 chip to operate on SOP16 MX25L3205 chip. (as long as 25 SPI chip models are identical, SOP8 and SOP16 chips can be used in this way)

25 SPI chip, SOP8 and SOP16 chip is interchangeable, as long as the chip pin corresponding to the line

Specifications for SOP8 packages and SOP16 packages:

SOP8 and SOP16 package, the foot spacing is the same, are 1.27, but the chip width is different. And chip definition of the corresponding pin is exactly the same, but the SOP16 chip packaging more than 8 feet NC empty feet (for future expansion as a basis), refer to the following figure, you can easily determine the SOP and SOP 25 SPI chip foot definition:

25 SPI SOP16 and SOP8 chip pins define the relationship:

The program can be programmed as long as the SOP16 pin is connected to the SOP8 adapter or directly to the programmer's seat.

In addition, MX25L3205 also has a TSSOP14 chip, the foot corresponding to the following picture:

RT809F RT809H optional accessories - KB9012 offline read-write adapter board, this is a piece, including PCB, 4 PIN needle row 2 groups.

Need to prepare the following materials and weld: 0603 package piece resistance one, resistance value 47K or 51K, bit number R1; 0603 package piece capacity two, 0.1uF, bit number C3 and C4; 10uF or 22uF capacitor one, package 0603 or 1206, bit number C1 or C2, install one. (Capacitor withstand voltage can be regardless, greater than 5V can be)