RT809F RT809H optional accessories - KB9012 offline read-write adapter board, this is a piece, including PCB, 4 PIN needle row 2 groups.

Need to prepare the following materials and weld: 0603 package piece resistance one, resistance value 47K or 51K, bit number R1; 0603 package piece capacity two, 0.1uF, bit number C3 and C4; 10uF or 22uF capacitor one, package 0603 or 1206, bit number C1 or C2, install one. (Capacitor withstand voltage can be regardless, greater than 5V can be)

Buy BGA repaired Nozzle: * BGA repaired Nozzle Operation manual

Specification:

Total Power 4400W

Top heater 800W

Bottom heater Second heater 1200W, IR preheating

2400w

Power supply AC220V10% 50/60Hz

Dimensions L570*W550*H570mm

Positioning V-groove, PCB support can be adjusted in

any direction with external universal

fixture

Temperature control K Sensor, Closed loop

Temp accuracy 2?

PCB size Min: 20mm*20mm, Max:

320mm*375mm

BGA chip 2*2~80*80mm

Minimum chip spacing 0.15mm

External Temperature Sensor 1(optional)

Net weight 30 KG

DH-380 Main functions:

Three independent heaters all can set 8 segments heating, cooling and constant

temperature, save up to ten temperature profiles. IR preheat area can be controlled

according to PCB size

ARM control system and laser positioning, repairing all kinds of computer

motherboards and PC.

Embedded Industrial PC, high definition drawer style touch screen interface, PLC

control, and instant profile analysis function. Real-time settings and actual temperature

profile display can be used to analyzed and correct parameters if necessary.

K-type close circuit control and automatic temperature adjustment system, with PLC

and temperature module to enable precision temperature control of 2 degC. External

temperature sensor enables temperature monitoring and accurate analysis of real time

temperature profile.

V-groove PCB support for rapid, convenience and accurate positioning that fits for all

kinds of PCB board. Flexible and convenient removable fixture

Various sizes of BGA nozzles, which can be adjusted 360 degree for easy installation and

replacement;

High powerful cross-flow fan and protect cover to enable fast cooling of PCB board

and prevent it from deformation.

Vacuum sucker and vacuum pen

Voice "early warning" function. 5-10 seconds before the completion of uninstalling or

welding, voice reminder / warning to get the workers prepared. Cooling system will start

after vertical wind stopped heating. When the temperature drops to room temperature, the

cooling process will stop, so that the machine will not age after heated up.

CE certification, with emergency switch and automatic power-off protection device

when emergency happens.

DX3014 Adapter for XELTEK SuperPro 6100N

BITMAIN AntMiner APW3+-12-1600 PSU Series

APW3++-12-1600-A3

Output Power :1600W

Brand Name : Antminer

Model Number :APW3++-12-1600-A3

Output Voltage: DC Voltage 12.15V

Output Current :133A

Voltage Range:100-240V AC

Starting Voltage:95-105V AC

Noise Level:<43DB

Input Frequency Range :47-63Hz

Output Interface :PCI-E (6 PIN) X 10

Dimensions :220mm*108mm*62mm

Weight :3kg

Shipping list:

New APW3++-12-1600-A3 PSU X 1 piece (You must provide your own a power cable )

Note:

1. The power cord is not included, please find one with at least 10A from your local market.

2. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.

3. This batch of PSU comes with only 10 PCIe connectors.

Brand: YAMAICHI

Model: ic120-0444-306

Spacing: 1.27mm

Overall dimension of seat: length width height

28mm28mm19.3mm

DX5196 Adapter for XELTEK SuperPro 6100N

Description:

100% brand new and high quality

Repair rubber dock bumpers

Seal plastic containers

Repair stripped threads in wood

Specation:

Material: plastic shell + glue

Color: as pic shows

Length: approx. 5.9inch/15cm

Width: approx. 1.85inch/4.7cm

Model: B-7000

Net weight: 1.68fl.oz (50ml)

Solid content: 30% - 35%

After curing Hardness: 65-80A

Surface drying time: 3 minutes

Full cure time: 24-48 hours

Storage: stored at 10 degrees to 28 degrees

Method of use:

Please read carefully before using the product instruction

Large area before use, please do small area test

Please make sure that the sticking surface cleaning and drying

The best use of temperature should be between 18-32 degrees

The product after opening the cover please timely cover titch removal for the adhesive residue on the cover

Wait for 1-2 minutes , two adherend aligment bonding a little pressure

It is straight hours can be after 48 hours to achieve the best bonding strength

The product does not use the bottle cap to prevent glue after contacting air curing

Package included:

1x Strength Glue

Center pin 8*6 1.27mm Spacing

Super Mini Elm327 Bluetooth V2.1 Latest Version

ATTENTION:

1. It only works with car (can not support Diesel or Truck).

2. It only works with Android 4.0-Android 4.4 version.

3. Please connect the item to your phone through bluetooth OBD II option.

4. ELM327 can do MOST of the OBDII vehicles, but it CAN NOT do all models.

5. It CAN NOT work on IOS, if you need an item which work on IOS, pls buy our WIFI ELM327

6. If the CD is broken, pls download the software from : 360diag.net . Sorry for the inconvenience to you

Highlights:

It supports almost OBD-II protocols.

It is the latest version 2.1

Bluetooth connection, no Batteries, Cables, or Switches.

Bluetooth 5~ 10 meters

Retrieve Fault Codes (DTCs) and clear Check Engine lights.

Can also be used with a PC with a Bluetooth Card.

Features:

Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).

Clear trouble codes and turn off the MIL ("Check Engine" light)

Set the maximum number of responses to obtain

Remove spaces from ECU responses (to speed data transmission)

Store a unique identifier in EEPROM

Set the CAN mask and filter with one command

Easily switch between variable and fixed CAN message lengths

Send CAN remote frames (RTRs)

Display current sensor data, including:

Engine RPM

Calculated Load Value

Coolant Temperature

Fuel System Status

Vehicle Speed

Short Term Fuel Trim

Long Term Fuel Trim

Intake Manifold Pressure

Timing Advance

Intake Air Temperature

Air Flow Rate

Absolute Throttle Position

Oxygen sensor voltages/associated short term fuel trims

Fuel System status

Fuel Pressure

Many others...

Our scanner is suitable to all car brands, but not all car models. Before you make order, please check whether your car model has one of the following protocols.

Support OBDII Protocols:

ISO 9141-2 (5 baud init, 10.4 kbaud)

ISO 14230-4 KWP (5 baud init, 10.4 kbaud)

ISO 14230-4 KWP (fast init, 10.4 kbaud)

ISO 15765-4 CAN (11 bit ID, 500 kbaud)

ISO 15765-4 CAN (29 bit ID, 500 kbaud)

ISO 15765-4 CAN (11 bit ID, 250 kbaud)

ISO 15765-4 CAN (29 bit ID, 250 kbaud)

Vehicle Coverage:

Works on almost OBD2 Vehicles (1996 onwards in USA) and EOBD vehicles

for Alfa Romeo/ for Audi / for Bentley/ for BMW/ for Cadillac/ for Chevrolet/ for Chrysler / for Citroen/ for Daewoo/ for Fiat/ for Ford/ for G-M/ for Honda / for Hyundai/ for Isuzu/ for Jaguar/ for Jeep/ for Kia/ for LandRover/ for Lexus/ for Mazda/ for Mercury/ for Mini/ for Nissan/ for Mitsubishi/ for Opel/ for Peugeot/ for Posch/ for Renault/ for Rover/ for Saab/ for Seat/ for Skoda/ for Toyt/ for Vauxhall/ for Volvo/ for VW

For your information:

For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.

Software Included:

Scantool_net113win (Full Version)

EasyOBDII V2.2 (Free Version)

OBD2Spy (Demo Version)

Scan Master-ELM (Demo Version)

wOBDCRAZY (Demo Version)

This hardware can match much other software still! But most of them are not free!

Works for Windows98/ME/2000/XP/Vista & Win 7!

This tool does not match abs and airbag system!

Bluetooth pair code: 1234

Packing List:

A.1*EOBD/OBD2 Bluetooth Diagnostic Interface

B.1*CD

Note: If CD unreadable or damaged,please contact us send you download link .Do not open dispute or negative feedback. Thanks

Works on Android Bluetooth Torque for Reference:

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

DX3001 Adapter for XELTEK SuperPro 6100N

Login to Download: * Manual Download

Product Description

The ultrasonic cleaner is a microprocessor-controlled device that uses ultrasonic or high frequency sound waves to clean jewelry and other delicate items. Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signals in fluid. Microscopic bubbles that expand and rapidly collapse cause cavitation, which creates an effective cleaning action on the surface of object being cleaned. Additionally, the bubbles are small enough to penetrate even microscopic crevices, cleaning them thoroughly and consistently.

High efficiency saves cleaning solvent, thermal energy, work place and labor!

Six sets of built-in powerful transducers can strengthen the ultrasonic power and make superior cleaning outcome. It is utilization of digital program in ultrasonic cleaner to control the unit, according to the quantity and condition of the items to be cleaned to choose a working cycle time. As a result, it is more convenient and efficient than hand wash, steam cleaners, high pressure water jet cleaning or other machines.

Advanced Brushed Stainless Steel Cleaning Tank to avoid corrosion water stain and keep the tank looking always new.

(In comparison, the common stainless steel cleaning tanks will be dirty yellow corrosion water stain on the surface after a long time of using, and it's hard to be removed.)

Application

Professional Use:

Medical and Dental Clinics, Tattoo Shops, Scientific Labs and Golf Clubs.

Jewelers, Opticians, Watchmakers, Antique Dealers and Electronics Workshops etc.

Personal or Home Use:

Jewelry: Earrings, Necklace, Rings, Bracelets and Diamonds.

Glasses and Timepieces: Glasses, Sunglasses, Optical Lenses, Contact Lens Accessories, Watch Chains and Waterproof Watches.

Commodities: Tattoo Guns and Tubes, Electric Shaver Heads, Razor Blades, Dentures, Combs and Toothbrushes.

Stationery: Pen-heads, Printer-heads, Inkjet Cartridges and Seals.

Metal Articles: Ancient Coins, Badges, Valves, Machine Nozzles, Electronics Components and Mechanical Parts.

Metal Dishware: Forks, Knives, Spoons and Other Small Silverwares etc.