DX3031 Adapter for XELTEK SuperPro 6100N

DX4023 Adapter for XELTEK SuperPro 6100N

Features:

- USB2.0 high speed port(480Mbit/s)

- 14PIN standard JTAG port, support TI core processor

- Support multi processorss: TMS320C28x, TMS320C54x, TMS320C55x, TMS320C64x+, TMS320C674x, ARM 9, ARM Cortex R4, ARM Cortex A8

- Support power off detection

- Support FTDI device drive

- Support time self adaption

- Support Code Composer Studio v4 or above

- Support LED light display control USB connection

Operation System:

- Windows 2000

- Windows XP

- Windows Vista

- Windows 7

Package Included:

- 1* XDS100 V2 Emulator

- 1* USB 2.0 Cable

- 1* 14Pin flat cable

Obd2 Pin Out Box Breakout Box Tester Diagnostic Obd2 Pin Connector Covere All Test Points

Description:

This tool is used to change the pin settings of other diagnostic tools/scanners without the needs to cut the connecting cable for re-wiring. You can also quickly switch between different terminals of your vehicle's OBD socket when using beta software/hardware. Comes with a quality lead with 16 pins wired. With a 16 pin female OBD connector, 16 pin male OBD connector and 15 pin D plug to connect to the breakout box.

Features:

All test points covered.

Allows monitoring of any OBD2 diagnostic systems.

Quickly switch data points without soldering.

Ideal for checking vehicle\'s diagnostic status.

Package list:

1 x OBD Breakout box with all test points.

1 x Cable

Universal IC Socket SSOP20 seat (0.65 spacing), has a long service life, suitable for all SSOP20 SSOP16 SSOP14 chip.

The suitable model and programmer. Such as: ALL-100GANG, ALL-11 series, LT-48 series, SuperPRO series, TOP series programmer all

Support: suitable for all SSOPS20 chip packaging base

SOP4-SOP28 SSOP4-TSSOP28 SMD to DIP Adapter Board (pin spacing 0.65mm/1.27mm)

Specific size chart:

Please check carefully before the size of the board for the pros and Cons: one side is applicable to the pin spacing 0.65mm (compatible with SSOP4~24 feet); the other side is applicable to the pin spacing 1.27mm (compatible with SOP4~24 feet)

ADP-SSO-056-0.8 For XGecu T56 Programmer

DX1044-1 Adapter for XELTEK SuperPro 6100N

Center pin 6*5 1.27mm Spacing

CANalyst-II USB to CAN Analyzer CAN-BUS Converter Software

Login to Download: Download software

Description:

USB and CAN-bus protocol conversion;

USB-CAN-1(x) is signal channel intelligent CAN interface module;

USB-CAN-2(x) is dual-channel intelligent CAN interface module;

CANalyst-II Analyzer is dual-channel intelligent CAN interface module with CAN-bus protocol analysis capabilities;

PC interface supports USB1.1 protocol and is USB 2.0 compliant;

Supports CAN2.0A and CAN2.0B protocols supports standard and extended frame;

Support CAN transmit and CAN Receive;

Support data frame and remote frame;

Programmable CAN-bus communication Baud rates from 10Kbps to 1Mbps;

USB-CAN-(x)A products:not isolated in the CAN-bus terminal;

USB-CAN-(x)B /C products: isolated with independently isolated DC-DC power module and High-speed magnetic coupling isolation module in the CAN-bus terminal;

CANalyst-II Analyzer: isolated with independently isolated DC-DC power module and High-speed magnetic coupling isolation module in the CAN-bus terminal;

Max data flow for a single channel: 8000 fps (standard frame) for receiving and 8000 fps(standard frame) for transmitting;

Buffer size:1000 frames length buffer for transmit(with auto repeat transmit when failed) per channel,2000 frames length for receive per channel;

Adopts USB bus power supply, eliminating the need for an external power supply;

USB-CAN-(x)A products,no electrical isolation;

USB-CAN-(x)B products, adopts electrical isolation, the isolation voltage is : 1000V;

USB-CAN-(x)C products, adopts electrical isolation, the isolation voltage is : 2500V;

CANalyst-II Analyzer, adopts electrical isolation, the isolation voltage is:2500V;

Operating temperature: -20 ~ 85 ?;

Physical size: (length) 70mm * (width) 45mm * (height) 24mm;

Product compatibility:Function library is similar to the library in Guangzhou ZLG USBCAN interface module.

Typical applications:

Transmit or receive massages in CAN-bus network with PC or laptop's USB;

The fast CAN network data collection, data analysis;

CAN-bus-USB gateway;

USB interface to CAN network interface;

Extend CAN-bus line length;

Industrial site CAN network data monitoring.

Include:

1 x USB-CAN Analyzer

1 x USB Cable

Latest Version X-PROG Box ECU Programmer XPROG-M V5.84 with USB Dongle

XPROG-M V5.84 X-PROG software

Login to Download: Download software

Install Notice

XPROG-M V5.84 windows system required as below:

1. Windows system should be windows7 64 bit, all the patch software for the windows system should be installed already and the windows properly works well...

2. The windows system should be with at lest 2 partitions (except the CD ROM.)

3. Can not be working with virtual harddisk.

XPROG-M V5.84 Highlights:

1. Latest software version: V5.84,Firmware:V4.4

2. With USB Dongle, No need to activate

3. Add new authorization: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9

4. Language: English

XPROG-M V5.84 using tips:

1. You are not allowed to use this newest dongle to update the older version Xprog to V5.84

2. Close all of the computer anti-virus software. If not, X-prog software may be killed.

3. Disconnect the internet. If not, the internet maybe damage the hardware.

4. Uninstall all of the old version xprog-m or xprog box software before you install V5.84 software we provide, because our xprog-box hardware is not compatible with other lower or higher version software, otherwise the hardware will be damaged and will lose its warranty...

5. Never try to UPDATE, the hardware will be damaged if you want to try to update it online, then you will lose its warranty.

XPROG-M V5.84 Authorizations:

AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)

AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)

AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)

AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)

AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)

AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)

AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.

AUTH-0008 BMW EWS3 authorization

AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)

AUTH-0010 MB ZGS001 authorization

AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)

AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)

AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)

AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)

AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)

AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)

AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage, Chassis number (VIN), serial number and PIN code).

AUTH-0023-1 MAC7xxx

AUTH-0023-2 XC23xx

AUTH-0024-1 MC9S12Cxx

AUTH-0024-2 MC9S12XE

AUTH-0024-3 9S12XE SECURITY

AUTH-0024-4 MC9S12HA/HY/P

AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13

AUTH-0027-1 HC(S)908 update Authorized 2016/3/13

AUTH-0027-2 HC(S)908 sercurity Authorized 2016/3/13

AUTH-0028-1 Renesas V850 Authorized 2017/10/9

AUTH-0028-2 Renesas SuperH Authorized 2017/10/9

XPROG-M V5.84 Adapters:

ADP-0001 TMS370 PLCC28 programming adapter

ADP-0002 TMS370 PLCC44 programming adapter

ADP-0003 TMS370 PLCC68 programming adapter

ADP-0004 Motorola HC05B/X PLCC52 programming adapter

ADP-0005 Motorola HC05B/X QFP64 programming adapter

ADP-0006 ST M35080 in-circuit programming adapter

ADP-0008 TMS374 family in-circuit programming adapter

ADP-0009 MC68HC05V12 programming adapter

ADP-0010 TMS374 on-board programming adapter

ADP-0011 HC11EA9/E9 programming adapter

ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter

Additional adaptor for 5M48H P-Flash

ADP-0019 Rev.A

EWS3 adaptor

EEPROM adaptor

QFP28 adaptor

QFP64 adaptor

QFP80 adaptor

QFP112 adaptor

QFP144 adaptor

XPROG-M V5.84 Install manuals in words:

1. Click the file "installation.reg", get the file information to the regedit.

2. Install the file "AdbeRdr11000_zh_CN.exe", it is a must, otherwise the Xprog software will not start.

3. Plug the Xprog main interface to the computer, install the USB driver.

4. Copy the folder "XPROG-BOX5.84" to the desktop, and open it, and run the "xprogdesktop.exe", then software open.

Package Includes:

1pc x XPROG-Box Hardware (Aluminum Enclosure) .

20pcx Adapters Set

1pc x USB Cable.

1pc x USB Dongle

1pc x CD with XPROG-Box Software (V5.84)

Product Description

Package includes: 1PCS X SOP8 DIP8 Socket (150mil)

SOIC8-DIP8 adapter (150mil) will work on all programmers

Stock: in stock

Condition: NEW