Login to Download: * Complete code of diagnosis card User Manual

This Tester pci-e Slot can diagnose the open circuit or Short Circuit of the pci-e Slot Plate quickly. In place of the test manual, Can You find the mistake easily without knowing the value of the resistance

Instructions:

Connect a 12 V DC Power Supply for the Tester of the pci-e Slot, and plug the pci-e Slot of the motherboard

Press the button on / Off Switch and all the lights of the Tester, the Tester is started. If some lights are off, check if the foot of the South Bridge is open circuit or short circuit, or the insulation is damaged.

Tester of the pci-e Slot is mainly used to fix the Base Plate when the PC Card postal code Sample FF or work without screen, VGA Card are unstable or not, etc.

The package includes:

1 unids Motherboard pci-e 16x PCI Express Card Slot with LED Analyser test

Description

Condition: new and original

Note : Due to post air mail can not send button battery (CR2032 ,3.2V) , so we will not send button battery , please you buy from your hometown. thank you so much !

Package includes:

1 * Tester (No English Manual)

In package included:

 1 pcs Programmer SVOD Ver. 4

 1 pcs USB Connection cable

 1 pcs EFI Ribbon Cable ( Hirose12 + Hirose 30 + Molex30 )

 1 pcs Soic 150mil + 1pcs Soic 209mil

 12pcs Flex cables: 34pin, 32pin, 30pin, 26pin (all cables what you see in picture).

 1 pcs Extended board of ports for keyboard module

1 pcs ZIP Clip 

Please to select shipping option in checkout:

Economy: 10-35 working days (Europe and Worldwide)

Expedited : 5-10 working days  (Europe and Worldwide)

SVOD V4 programmer  is a universal programmer for various microcircuits.

 As you know you can program different kinds of chips such as:  SPI, I2C, ONE WIRE, NAND, NAND SPI, NOR, EMMC, JTAG, UART, ENE, MEC, ITE, NUVOTON, parallel synchronous and asynchronous protocols. Automatic detection of "bad contact" when connecting chips.

Protocol: JEDEC ID (spi25 flash, Nand have 5 byte ID, spi NAND have 512 byte ID, nor48,40 have 3 byte id, emmc have 512 byte id, new spi25 have id with 128 byte info).

 Specifications:

*SVOD 4 port of connection to the computer: usb 2.0- 3.0 high speed,

*SVOD 4 CPU: Processor ARM7, 480MHz

*SVOD 4 Voltage: 12V, 5V, 3.3V, 2.5V, 1.8V, 1.5V, 1.25V, 1.2V, 0.8V

*SVOD 4 GPIO PIN: 48+16 

 -------------------------------------------------------------------------

As you know you can program different kinds of chips such as:  SPI, I2C, ONE WIRE, NAND, NAND SPI, NOR, EMMC BGA, JTAG, UART, ENE, MEC, ITE, NUVOTON, parallel synchronous and asynchronous protocols. Automatic detection of "bad contact" when connecting chips.

Supported:

KB9010,KB9012, KB9016, KB9018, KB9022, KB9028qc

NPCE288N/NPCE388N

ITE IT5571VG PROGRAMMABLE

ITE IT8380E PROGRAMMABLE

ITE IT8380VG PROGRAMMABLE

ITE IT8386 PROGRAMMABLE

ITE IT8522 PROGRAMMABLE

ITE IT8580 PROGRAMMABLE

ITE IT8585E PROGRAMMABLE

ITE IT8586E PROGRAMMABLE

ITE IT8586VG PROGRAMMABLE

ITE IT8587E PROGRAMMABLE

ITE IT8589 PROGRAMMABLE

ITE IT8886H PROGRAMMABLE

ITE IT8886HE PROGRAMMABLE

ITE IT8985E PROGRAMMABLE

ITE IT8987E PROGRAMMABLE

ITE IT8995E PROGRAMMABLE

NUVOTON NPCE288NA0DX PROGRAMMABLE

NUVOTON NPCE388NA0DX PROGRAMMABLE

LENOVO IT8227VGPROGRAMMABLE

MEC1404-NU 128-VTQFP PROGRAMMABLE 128 KB

SMSC MEC1404-SZ 144-WFBGA PROGRAMMABLE 128 KB

SMSC MEC1406-NU 128-VTQFP PROGRAMMABLE 160 KB

SMSC MEC1406-SZ 144-WFBGA PROGRAMMABLE 160 KB

SMSC MEC1408-NU 128-VTQFP PROGRAMMABLE 192 KB

SMSC MEC1408-SZ 144-WFBGA PROGRAMMABLE 192 KB

SMSC MEC1414-NU 128-VTQFP PROGRAMMABLE 128 KB

SMSC MEC1414-SZ 144-WFBGA PROGRAMMABLE 128 KB

SMSC MEC1416-NU 128-VTQFP PROGRAMMABLE 160 KB

SMSC MEC1416-SZ 144-WFBGA PROGRAMMABLE 160 KB

SMSC MEC1418-NU 128-VTQFP PROGRAMMABLE 192 KB

SMSC MEC1418-SZ 144-WFBGA PROGRAMMABLE 192 KB

SMSC MEC1609 PROGRAMMABLE

SMSC MEC1619 PROGRAMMABLE

SMSC MEC1632 PROGRAMMABLE

SMSC MEC1633 PROGRAMMABLE

SMSC MEC1641 PROGRAMMABLE

SMSC MEC1650 PROGRAMMABLE

SMSC MEC1651 PROGRAMMABLE

SMSC MEC1653 PROGRAMMABLE

SMSC MEC5035 PROGRAMMABLE

SMSC MEC5045 PROGRAMMABLE

SMSC MEC5055 PROGRAMMABLE

SMSC MEC5075 PROGRAMMABLE

SMSC MEC5085 PROGRAMMABLE

SMSC MEC1609 PROGRAMMABLE

 SMSC MEC1609I PROGRAMMABLE

SMSC MEC1633L PROGRAMMABLE

 EPF011/021/035/036/037

 SMSC MEC5085 NON-PROGRAMMABLE

 You can buy a brand new programmer / Tested 100% .

The mode of displaying POST codes of the laptop motherboard is implemented. Choose the software in the online base of your motherboard, download, select it in the choice of motherboard, connect the motherboard with a loop to the keyboard connector, and read the post codes by running the software in read mode of POST codes.

MANY FLASHING FILES IN DATABASE FOR FREE WHEN YOU WILL CONNECT PROGRAMMER

if you are not from Europe, please inquire about customs tax, VAT of your country.

We do not dispatch any products to Russia.

Colombia, Paraguay, Brazil, Mexico - before placing an order, please to ask your customs about tax and duties.

Colombia, Paraguay, Brazil, Mexico - antes de realizar un pedido, consulte con la aduana sobre la cantidad de impuestos y aranceles.

Si no eres de Europa, consulta sobre el impuesto de aduanas, el IVA de tu país.

Features:

PC LCD post test card Professional Version PTI8 is the 2011 latest computer repair tool, this professional version has all the advantages of Accurate PTI6, while it has upgraded the chip solution, adapting three-level menu operation, adding hundreds of diagnostic codes (from authoritative institution).

PTI8 could offer real-time monitoring on the voltage, and the professional function like key signal monitoring.

With unique Muti Post technology, PTI8 is able to monitor most POST interface of most motherboard, and it is compatible with most of the popular motherboards

Pti8 has MINIPCIE, MINIPCI, LPC these three interfaces of notebook PC, which makes it new generation motherboards LCD Post Card that is compatible with both desktop and notebook PC.

PTi has two screens design, as we had feedbacks from customers that one screen is not convenient enough.

PTI8 is a indispensable tool for computer repair personals.

It supports Desktop PCI interface and laptop Mini PCI-E interface,

Comprehensively compatible all motherboards' PCI socket.

Passed the strict test for 9 kinds of Asus mainstream motherboards, cover INTEL and AMD mainstream products.

The compatibility also passed the test for a series of motherboards of INTEL 815, INTEL 845, INTEL 865, INTEL 915, INTEL 945 INTEL 965 ATI SB600, ATI Xpress 200, ATI Xpress 1100, AMD 480X chipset .

Package Includes:

1 x Diagnostic Debug Card support Desktop PCI with extention LCD Display

1 x Diagnostic Card support Laptop Mini PCI / Mini PCI-E / LPC

1 x Cable for Laptop diagnostic card

LGA-1151 2in1 Motherboard CPU Socket Analyzer Card Dummy Load with LED

TL631-Pro Diagnosis Card + MINI PCIE + A-DEBUG Desktop PCI Mainboard PCI-e Notebook Debugging Card Apple PC LPC Debug

Description

Condition: new and original

Note : Due to post air mail can not send button battery (CR2032 ,3.2V) , so we will not send button battery , please you buy from your hometown. thank you so much !

Package includes:

1 * Tester (No English Manual)

Mini PCI/Mini PCI-E/LPC Combo-Debug-Card VIP version Notebook Combo-Debug-Card (VIP Version) User Guide

This notebook Combo-Debug Card Uses 4-layers PCB design to provide a very stable signal quality. Also, it uses Tantalum capacitance to provide good power supply. So this VIP version Debug card is more suitable to be used in poor environment. This VIP version is the upgraded version of the Combo-Debug-Card, and it supports three bus interfaces: MINI PCI, MINI PCI-E and LPC. This product is easy to use, and is designed with good stability. It is your ideal tool for notebook repair.

combo ?debug- card structure and usage

1. Mini-PCI interface:

This is used to connect this Combo Debug Card to notebooks Mini-PCI slot.

2. Mini-PCI-E interface:

This is used to connect this Combo Debug Card to notebooks Mini-PCI-e slot

3. LPC interface:

This is used to connect this Combo Debug Card to notebooks LPC connector.

4. ASIC

5. Two 7-segment LEDS:

This is used to display the Error-code

6. Test port:

This port is reserved, and end-user should not use this port.

7. indicator : this is for showing the status of CLK and RST signal.

The Mini-PCI interface in the Combo-Debug-Card

Mini PCI is a general interface, which is used in notebook. It includes 124 pins. This combo-debug-card doesnt fully use those pins, and only 101 pins are used. When installing this combo-debug-card to your notebook main-board , you will find the combo-debug-card is shorter than the notebook Mini-PCI slot. This is correct, and it servers better for you to plug or unplug this combo-debug-card.

The Mini-PCI-e interface in the Combo-Debug-Card

Mini-PCI is used as a trend in the new notebooks. Comparing to Mini-PCI, Mini-PCI-e occupies less space. This Combo-Debug-Card doesnt use all of the Mini-PCI-e bus pins. And only the below pins are used: PIN-8, PIN-10, PIN-12, PIN-14, PIN-16, PIN-17, and PIN-19. in the Mini-PCI-e spec, those pins are reserved, and it is not standard, so some of Notebook manufacturers define it as a LPC debug-port. And more and more notebook manufacturers are using this standard, such as IBM, Toshiba, HP, ASUS, TCL and etc??this Combo-Debug-Card can only work in the notebooks, which are with the LPC debug-port definition. For the notebooks, which dont support this LPC debug-port definition, this Combo-debug-card PCI-E interface will not work.

Note: Please be aware that Mini-PCI-e is supported with limitation, and it can works in most of notebooks, but not all.

The LPC interface in the Combo-Debug-Card

For the user, whose notebooks dont support the Mini-PCI interface and the Mini-PCI-e interface, you can use the third port: LPC interface. LPC interface exists in all notebook main-boards. In the Combo-Debug-Card, from left to right, the LPC definition is:

PIN1-LFRAME?, PIN2-LAD3, PIN3-LAD2, PIN4-LAD1, PIN5-LAD0, PIN6-GND, PIN7-LRESET?, PIN8- LCLK, PIN9-3.3V

Usually, the notebook boards havent LPC connectors or slots. And the users will need to connect this LPC port to the notebook by using wires. Below is some description for how to connect the Combo-Debug-Card to your notebook through this LPC interface.

If your notebooks use LPC VBIOS, you can connect the Combo-Debug-Card to your notebooks VBIOS bus.

LPC VBIOS Pin definition:

PIN2-RST? PIN13-LAD0 PIN14-LAD1 PIN15-LAD2 PIN16-GND PIN17-LAD3 PIN23-LFRAME? PIN25-VCC PIN31-CLK

You can connect this Combo-Debug-Card to any LPC bus. Some LPC interface chips are listed as below. You can connect the Combo-Debug-Card to the corresponding pins. For more information, please refer those chips datasheets.

Note: this Combo-Debug-Card uses 3.3V as power supply, and you can use any 3V3 and GND signals in your notebook main-board. Please be aware that connecting the Combo-Debug-Card to a non-3.3V power may damage this Combo-Debug-Card.

For IBM X 60 notebooks, the LPC interfaces are located in the U39 slot of the main-board. The Pin definitions are as below: A2->LRESET? A3->LFRAME? A5->LCLK A9->LAD3 A10->LAD2 A11->LAD1 A12->LAD0

For IBM T6 R6 notebooks, the LPC interfaces are located in the J26 slot of the main-board. The Pin definitions are as below: A1->LCLK, A3->LFRAME? B2->LRESET? B7->LAD3 A7->LAD2 B6->LAD1 A6->LAD0

The LED-Display in the Combo-Debug-Card

The Display includes Error-Code display, Bus-Type display, and CLK,RST signal, status display .

1, Error-Code display: It is composed with two 7-segment LED s.

2, Bus-Type display: The two Dots of the LED s are used to indicate the notebook bus type. The left side Dot is for Mini-PCI bus, and the right side Dot is for Mini-PCI-e and LPC bus. When the notebook works in Mini-PCI bus, the right side Dot will be lighted.

3, CLK, RST signal status display: when you hold on the notebooks RESET button, the RST indicator will be lighted, and the CLK indicator will be off. When you release the notebook RESET button, the RST indicator will be off, and the CLK indicator will be twinkled.

Part of Error-Code explanation

When the notebooks are running, this Combo-Debug-Card will show the corresponding debug code. If there is a problem in the notebook, you can judge the problem by the debug code. Below is the explanation for some main error codes.

AWARD BIOS:The explanation when the Combo-Debug-Card shows the below debug codes.

Code Explanation

C0 Close cache

01 Processor test

07 CMOS test

C1 Memory size test

0A Set the interrupt table

0C Initiate the keyboard

0D Initiate the Graphic card

1A Show CPU frequency

3C CMOS setting

42 Initiate hardware

52 Test the extended ROM

FF Boot

AMI BIOS: The explanation when the Combo-Debug-Card shows the below debug codes.

Code Explanation

00 Error in self test

01 Error in processor test

0D,0F Error in CMOS test

1A~22 Error in Memory test

3A Error in graphic card

FF Pass the self test

Q/A

Question: RST indicator is off, but CLK indicator is NOT twinkled.

Answer: this symptom shows there is no CLK signal for debug card so that the CLK indicator isnt twinkled .Usually, it may mean the motherboard can NOT support this Mini-PCI-e interface. Please use Mini-PCI or LPC interface to test it.

Question: RST indicator is off ,and CLK indicator is twinkled. But it shows 00

Answer: In this case, please check the Bus-Type display to check if the Bus-Type display is corresponding to the bus type.

In package included:

1 pcs x GZUT EZP XPRO Programmer

1 pcs x EFI Riboon Cable

2 pcs x small PCB

1 pcs x USB cable

You can select shipping option in checkout:  Economy or Expedited

Economy: 10-35 working days (Europe and Worldwide)

Expedited : 5-10 working days  (Europe and Worldwide)

 With this Professional SET you can make adjustments for Bios manually and fix EFI.

This flashing set (GZUT v2 PRO + EFI RIBBON CABLE) used for Mcbook, McBook Air and new McBook Pro models from 2010 to 2017 

It has three connectors for the years 2010 – 2011, 2012 – 2014 and 2015 – 2017

You can read bios chip without desoldering process. 

Programmer EZP GZUT v2 PRO set supported  :

MBA11 2015 A1465 820-00164
MBA11 2013 A1465 820-3435
MBA13 2011 A1369 820-3023
MBA11 2011 A1370 820-3024
MBA 13 2013 A1466 820-3437
MBA 13 2012 A1466 820-3209
MBA13 2015 A1466 820-00165
MBA13 2017 A1466 820-00165
MBP13 2016 A1708 820-00875
MBP13 2016 A1706 820-00239
MBP15 2017 A1707 820-00928
MBP15 2016 A1707 820-00281
MBP13 2017 A1706 820-00923
MBP13 2017 A1708 820-00840
MBP13 2015 A1502 820-4924
MBP13 2014 A1502 820-3476
MBP13 2014 A1502 820-3536 
MBP13 2013 A1502 820-3476
MBP13 2014 A1502 820-3476
MBP15 2012 A1398 820-3332
MBP15 2013 A1398 820-3332
MBP15 2013 A1398 820-3662
MBP15 2013 A1398 820-3787
MBP15 2014 A1398 820-3662
MBP15 2015 A1398 820-00138 
MBP15 2015 A1398 820-00163
MBP12 2015 A1534 820-00045
MBP12 2016 A1534 820-00244
MacMini 2011 A1347 820-2993

Apple Macbook Pro A1286 M98_820-2330-A_G96-632-C1_SST25VF032B - EFI ribbon cable not compatible, support GOLDEN pin silicone cable. 

You can used GOLD PIN SILICONE CABLE and read this bios chip (visit our shop and check)

Apple A1278 K6 MCP89MZ-A2 SST25VF032B -  EFI ribbon cable not compatible (support only GOLDEN PIN silicone cable)

Apple Imac 27 A1312 820-2828-A_MX25L6406E - EFI ribbon cable not compatible (support only GOLDEN PIN silicone cable)

Apple MacBook Pro A1297 820-2914-B-MX25L6406E - EFI ribbon cable not compatible (support only GOLDEN PIN silicone cable)

Apple MacBook Pro A1278-820-2936-B-MXIC MX25L6406E - EFI ribbon cable not compatible (support only GOLDEN PIN silicone cable)

Apple MacBook Pro 13" A1278 820-3115-B MD101 MX25L6406E  - EFI ribbon cable not compatible (support only GOLDEN PIN silicone cable)

In our store also you can find and Chips Cards: 

If you are not from Europe, please inquire about customs tax, VAT of your country.

We do not ship products to Australia with economy Post, only Express.

We do not ship any products to Russia.

Counties: Colombia, Paraguay, Brazil, Mexico, India, UK, Canada and ect - before placing an order, please to ask your customs about tax and duties.

Counties: Colombia, Paraguay, Brazil, Mexico, India, UK, Canada and ect  - antes de realizar un pedido, consulte con la aduana sobre la cantidad de impuestos y aranceles.

Si no eres de Europa, consulta sobre el impuesto de aduanas, el IVA de tu país.