• Show Sidebar

There are 1014 products.

Active filters

  • Categories: Car Service Equipment
  • Categories: EFI Rom Cable
  • Categories: Laptop Parts, Repair tool
  • Categories: Programmer & Sockets
wishlist
Compare
Quickview

TNM5000 USB fast ISP EEPROM universal Programmer TSOP48 TSOP56 adapter set IC socket

TNM5000 Universal Programmer Introduction

Login to Download: * Programmer latest Software

User Manual Device List Nand Software Utility Software for RS232 & USB Bl a ster Emulation

? 23000 Supported Devices Flash Memory (Parallel / Nand /Serial) , EPROM , EEPROM , Serial EEPROM , Microcontroller , NVRAM , FRAM , CPLD , PLD , FPGA).

? 48-Pins ZIF Socket with Pin Continuity tester & 10-Pins ISP/JTAG Connector.

? USB 2.0 High Speed ,Program 1 Gbit Nand Flash less than 50 sec , Reading Serial Flash memory with 6 Mbit/Sec Speed.

? Auto detection of all flash Memories/Microcontrollers with Device ID.

? User friendly software for Windows XP/VISTA/7/8 (32,64 bits).

? Multiple Programming is possible by attaching 2 or more Programmers to one PC.

? Very low cost Main Unit & Low cost adaptors.

? Special Abilities like, Altera US,B-B.l*a*s.ter Emulation for Quartus Software, Serial Port Emulation , Vehicle ECU , Immoblizer & Dashboard microcontroller Support.

Parallel Flash Memories: up to 56 pins parallel flash memories are supported by TNM5000. it Supports different kind of packages (PLCC , TSOP1 , TSOP2 ,VSOP & ...).

All Flashes can be automatically detected by software in case of unreadable device names. By using a single adaptor for all 32-48 pins TSOP flashes , user only need 1 adaptor for over 2000 flash chips.

Nand Flash Memories: TNM5000 has an additional Nand+ software , specially designed for Nand flash memories. Nand+ Software has one of the most complete list of Nand flash Memories with algorithms for correction of bad data in MLC Nand Flashes. TNM5000 is one of the fastest Nand Programmers in the world with Read & Write Speed up to 8 MegaByte per Second. All Nand Flashes can be automatically detected by software in case of unreadable or remarked device names.

Serial Flash Memories: All 8-16 Pins Serial SPI flash memories are supported by TNM5000. All SPI flash Memories can be detected automatically by software in case of unreadable device names. It reads & programs SPi flashes with maximum safe speed on ZIF (6-7 Mbit/second) . Also it Unprotects the write protected flashes before writing data to it.

Microcontrollers:

ATMEL: All AVR 8 bits chips (ATMEGA/ATTINY/AT90S) are supported on ZIF Scocket & by ISP cable. High Voltage Parallel on ZIF Programming of AVR up to 64 pins is supported. newly introduced ATXMEGA Series are supported by both PDI & JTAG Method. Old C51 series & new single cycle C51 series are completely supported. All the above series can be detected automatically by TNM5000. ARM7 programming by JTAG is supported.

Microchip: One of the most complete device list for microchip PIC microcontrollers including all PIC12F /PIC12C /PIC16C / PIC16F / PIC18F / DPIC33F / J & K Series. Devices up to 40 Pins can be programmed on ZIF , All PICs can be detected automatically & programmed by ISP cable.

Others: ST, SST, Philips (NXP) , Motorola , Syncmos, Silicon Lab , ICSI , Infineon , Intel , Winbond & ...

Automotive MCUS: Supporting of ST10F & TMS370 Series by ISP cable for many BOSCH/VALEO/SAGEM ECUs (complete ST10F support of XPROG-m programmer device list). supporting of siemense & infineon SAK-C167 connected to 44 or 48 pins flash (Siemense/BOSCH/SAGEM S2000 ECU) like HSE FlasHit Programmer. Supporting NEC & Motorola Devices for Dashboards.

PLD/CPLD/FPGA: Supporting All ALTERA JTAG Devices by emulation of USB B l a s t e r Programmer in Quartus Software. Supporting of Xilinx CPLD/FPGA with jed file. Fast Xilinx FPGA configuration with bit file. Supporting of GAL/PALCE Devices with special option for PALCE unlocking.

Software: With multiple language support (English / Chinese / Russian /polska /Arabic / French /FARSI). More languages & Devices can be added by customer request. You Can Download Software & run it in Demo mode to evaluate it.

Package List:

1 x TNM5000 Programmer

1 x TSOP56 adapter set IC socket (5PCS)

1 x TSOP48 adapter set IC socket

1 x usb cable

1 x software CD

CH002464
€439.01

TNM5000 USB fast ISP EEPROM universal Programmer + TSOP48 TSOP56 adapter set IC socket

wishlist
Compare
Quickview

HAYEAR 21MP 1080x80X 300X

Features:

Model: Camera with HDMI USB2.0 two output

Image format: jpg

Image resolution: 21 MegaPixel

Video format: MP4(for TF card)

Video recorder: 2K@30FPS, 1080P@60FPS

HDMI Video resolution: 1920*1080 @ 60FPS

USB Video resolution: 1920*1080@30FPS; 1280*720@30FPS; 640*480@30FPS; 320*240@30FPS

White Balance: Auto/Manual

Light: Auto/Manual

Exposure: Auto/Manual, value adjustable

Color: Color

Morror: Left/right,Up/Down

Freeze: Support

OSD: English/Chinese/French/Spanish/Japanese/German

Line: different color,5 horizontal line , 5 vertical line,any positions

Specification:

Image sensor: 21 megapixel CMOS sensor 1/2.33 inch

Effective pixel: 21 megapixel

Pixel size:1.335m 1.335m

Frame rate:60fps

Definition:FULL HD

Housing:metal

Lens:C/CS

Video format: MOV

Digital Zoom:Support

Brightness control:Auto/manual

Color:R/G/B adjustable

Film and record:Support

Cross cursor:Support multi-color, size adjustable

Transverse and vertical line:

Support multi-color, 5 pcs of transverse lines/vertical lines, moveable

Different color,5 horizontal line , 5 vertical line,any positions

TF card interface:Max 64G

HDMI interface:Standard HDMI output (Type A)

USB interface:Standard usb2.0 interface (Type B)

Input Voltage: DC 12V

Stereo Table Stand Feature:

Need a Sturdy Boom Stand for reduced Vibration and Optimal Versatility? This stand provides what is needed!

Easy Large-Sized Focusing Knobs on Both Sides of Focusing Holder.

Steel Gears on Focusing Holder.

Standard Size Focusing Holder - Will Fit Scope Heads with Diameter of 50mm

Item size: see the 1th picture

Weight: 2.6kg

180X C-MOUNT Lens:

Working distance: 100-150mm

zoom c-mount Lens

0.5X C-mount adapter

zoom ratios: 6.5:1

Objective Magnification Power by 0.7 - 4.5X(about 10 - 180X on the display)

Size: 180mm(L) * 50mm(DIA)

Weight: 450g

300X C-MOUNT Lens:

Working distance: 95mm

Zoom c-mount Lens

1X C-mount adapter

Zoom ratios: 6.5:1

Objective Magnification Power by 0.7 - 4.5X(about 10 - 300X on the display)

Size: 248mm(L) * 50mm(DIA)

144 Bulbs Microscope LED Ring Light:

60 bright white LED bulbs:

100,000 hours of life

Intense and focused shadow-free illumination

The brightness of 0-100%Adjustable,high brightness

Variable intensity control

Power input: 100-240V, 50-60HZ

Suit for the dia of the lens: 30mm-63mm

Package including:

1 x 21mp Microscope Camera

1 x 180X C-mount Lens or 300X X-mount lens

2 x Power supply

1 x USB line

1 x HDMI line

1 x Software DISC

1 x LED Ring light

1 x Table Stand

CH001302
€217.56

HAYEAR 21MP 1080P 60FPS 2K HDMI Electron Microscope Set USB Digital Industry Video Microscope Camera 180X 300X

LVDS Cable Samsung NP350V5C

LVDS Cable Samsung NP350V5C

Part Number NP350V5C Manufacturer Samsung

Type LVDS Cable Date Code 16+

Package/Case 1 PCS Description Original new

CH001255
€14.88

LVDS Cable Samsung NP350V5C

wishlist
Compare

TNM5000 USB fast ISP EEPROM universal Programmer TSOP48 TSOP56 adapter set IC socket

TNM5000 Universal Programmer Introduction

Login to Download: * Programmer latest Software

User Manual Device List Nand Software Utility Software for RS232 & USB Bl a ster Emulation

? 23000 Supported Devices Flash Memory (Parallel / Nand /Serial) , EPROM , EEPROM , Serial EEPROM , Microcontroller , NVRAM , FRAM , CPLD , PLD , FPGA).

? 48-Pins ZIF Socket with Pin Continuity tester & 10-Pins ISP/JTAG Connector.

? USB 2.0 High Speed ,Program 1 Gbit Nand Flash less than 50 sec , Reading Serial Flash memory with 6 Mbit/Sec Speed.

? Auto detection of all flash Memories/Microcontrollers with Device ID.

? User friendly software for Windows XP/VISTA/7/8 (32,64 bits).

? Multiple Programming is possible by attaching 2 or more Programmers to one PC.

? Very low cost Main Unit & Low cost adaptors.

? Special Abilities like, Altera US,B-B.l*a*s.ter Emulation for Quartus Software, Serial Port Emulation , Vehicle ECU , Immoblizer & Dashboard microcontroller Support.

Parallel Flash Memories: up to 56 pins parallel flash memories are supported by TNM5000. it Supports different kind of packages (PLCC , TSOP1 , TSOP2 ,VSOP & ...).

All Flashes can be automatically detected by software in case of unreadable device names. By using a single adaptor for all 32-48 pins TSOP flashes , user only need 1 adaptor for over 2000 flash chips.

Nand Flash Memories: TNM5000 has an additional Nand+ software , specially designed for Nand flash memories. Nand+ Software has one of the most complete list of Nand flash Memories with algorithms for correction of bad data in MLC Nand Flashes. TNM5000 is one of the fastest Nand Programmers in the world with Read & Write Speed up to 8 MegaByte per Second. All Nand Flashes can be automatically detected by software in case of unreadable or remarked device names.

Serial Flash Memories: All 8-16 Pins Serial SPI flash memories are supported by TNM5000. All SPI flash Memories can be detected automatically by software in case of unreadable device names. It reads & programs SPi flashes with maximum safe speed on ZIF (6-7 Mbit/second) . Also it Unprotects the write protected flashes before writing data to it.

Microcontrollers:

ATMEL: All AVR 8 bits chips (ATMEGA/ATTINY/AT90S) are supported on ZIF Scocket & by ISP cable. High Voltage Parallel on ZIF Programming of AVR up to 64 pins is supported. newly introduced ATXMEGA Series are supported by both PDI & JTAG Method. Old C51 series & new single cycle C51 series are completely supported. All the above series can be detected automatically by TNM5000. ARM7 programming by JTAG is supported.

Microchip: One of the most complete device list for microchip PIC microcontrollers including all PIC12F /PIC12C /PIC16C / PIC16F / PIC18F / DPIC33F / J & K Series. Devices up to 40 Pins can be programmed on ZIF , All PICs can be detected automatically & programmed by ISP cable.

Others: ST, SST, Philips (NXP) , Motorola , Syncmos, Silicon Lab , ICSI , Infineon , Intel , Winbond & ...

Automotive MCUS: Supporting of ST10F & TMS370 Series by ISP cable for many BOSCH/VALEO/SAGEM ECUs (complete ST10F support of XPROG-m programmer device list). supporting of siemense & infineon SAK-C167 connected to 44 or 48 pins flash (Siemense/BOSCH/SAGEM S2000 ECU) like HSE FlasHit Programmer. Supporting NEC & Motorola Devices for Dashboards.

PLD/CPLD/FPGA: Supporting All ALTERA JTAG Devices by emulation of USB B l a s t e r Programmer in Quartus Software. Supporting of Xilinx CPLD/FPGA with jed file. Fast Xilinx FPGA configuration with bit file. Supporting of GAL/PALCE Devices with special option for PALCE unlocking.

Software: With multiple language support (English / Chinese / Russian /polska /Arabic / French /FARSI). More languages & Devices can be added by customer request. You Can Download Software & run it in Demo mode to evaluate it.

Package List:

1 x TNM5000 Programmer

1 x TSOP56 adapter set IC socket (5PCS)

1 x TSOP48 adapter set IC socket

1 x usb cable

1 x software CD

CH002464
€439.01

TNM5000 USB fast ISP EEPROM universal Programmer + TSOP48 TSOP56 adapter set IC socket

wishlist
Compare

HAYEAR 21MP 1080x80X 300X

Features:

Model: Camera with HDMI USB2.0 two output

Image format: jpg

Image resolution: 21 MegaPixel

Video format: MP4(for TF card)

Video recorder: 2K@30FPS, 1080P@60FPS

HDMI Video resolution: 1920*1080 @ 60FPS

USB Video resolution: 1920*1080@30FPS; 1280*720@30FPS; 640*480@30FPS; 320*240@30FPS

White Balance: Auto/Manual

Light: Auto/Manual

Exposure: Auto/Manual, value adjustable

Color: Color

Morror: Left/right,Up/Down

Freeze: Support

OSD: English/Chinese/French/Spanish/Japanese/German

Line: different color,5 horizontal line , 5 vertical line,any positions

Specification:

Image sensor: 21 megapixel CMOS sensor 1/2.33 inch

Effective pixel: 21 megapixel

Pixel size:1.335m 1.335m

Frame rate:60fps

Definition:FULL HD

Housing:metal

Lens:C/CS

Video format: MOV

Digital Zoom:Support

Brightness control:Auto/manual

Color:R/G/B adjustable

Film and record:Support

Cross cursor:Support multi-color, size adjustable

Transverse and vertical line:

Support multi-color, 5 pcs of transverse lines/vertical lines, moveable

Different color,5 horizontal line , 5 vertical line,any positions

TF card interface:Max 64G

HDMI interface:Standard HDMI output (Type A)

USB interface:Standard usb2.0 interface (Type B)

Input Voltage: DC 12V

Stereo Table Stand Feature:

Need a Sturdy Boom Stand for reduced Vibration and Optimal Versatility? This stand provides what is needed!

Easy Large-Sized Focusing Knobs on Both Sides of Focusing Holder.

Steel Gears on Focusing Holder.

Standard Size Focusing Holder - Will Fit Scope Heads with Diameter of 50mm

Item size: see the 1th picture

Weight: 2.6kg

180X C-MOUNT Lens:

Working distance: 100-150mm

zoom c-mount Lens

0.5X C-mount adapter

zoom ratios: 6.5:1

Objective Magnification Power by 0.7 - 4.5X(about 10 - 180X on the display)

Size: 180mm(L) * 50mm(DIA)

Weight: 450g

300X C-MOUNT Lens:

Working distance: 95mm

Zoom c-mount Lens

1X C-mount adapter

Zoom ratios: 6.5:1

Objective Magnification Power by 0.7 - 4.5X(about 10 - 300X on the display)

Size: 248mm(L) * 50mm(DIA)

144 Bulbs Microscope LED Ring Light:

60 bright white LED bulbs:

100,000 hours of life

Intense and focused shadow-free illumination

The brightness of 0-100%Adjustable,high brightness

Variable intensity control

Power input: 100-240V, 50-60HZ

Suit for the dia of the lens: 30mm-63mm

Package including:

1 x 21mp Microscope Camera

1 x 180X C-mount Lens or 300X X-mount lens

2 x Power supply

1 x USB line

1 x HDMI line

1 x Software DISC

1 x LED Ring light

1 x Table Stand

CH001302
€217.56

HAYEAR 21MP 1080P 60FPS 2K HDMI Electron Microscope Set USB Digital Industry Video Microscope Camera 180X 300X

wishlist
Compare
Back to top