DX3032 Adapter for XELTEK SuperPro 6100N

LVDS Cable for screen Lenovo B50-30 B50-45 B50-70 (touch) P/N: DC02001XN00

XELTEK SuperPro 6100N (so not 6100)Universal Programmer 100,000+ devices supported

Login to Download: Download software

SuperPro 6100N is a cost-effective, reliable, and high-speed universal chip programmer. It is designed to communicate using USB 2.0 port for development requirement and can also work in standalone mode (without connecting to a PC) for production requirement. It has the largest device support count in the programming industry with 144 pin drivers to support high pin count chips.

Application and target customers: Programming houses, electronic repair, car repair shops, forensic and data recovery companies, medical devices, requirement for larger device support.

Advantages of SuperPro 6100N

Ultra Fast Programming Speed SuperPro 6100 is designed with high programming speed in mind. Our semiconductor manufacturer approved algorithms, precision and clean signals guarantee high programming yield. Special design was made to eliminate overshoot and ground bounce. Algorithms are performed with state machine architecture constructed with FPGA to achieve a ultra-high programming speed.

Largest Device Support Located in Silicon Valley, we keep good relationships with many major IC companies that are important for us to continuously support new devices. SuperPro 6100 currently supports more than 100,000 devices, which is the largest device library in the programming industry. Requested device algorithms can be added within a week - average lead time from other manufacturers is over two months.

Built-in 144 Pin Driver Most universal IC programmers are designed with 48 pin driver or less. Programmers with a 48 pin driver design need special adapters (pin mapping) to accommodate devices with more than 48 pins. Bottom boards needed for pin mapping can quickly increase production costs just to support one package type. SuperPro 6100N is equipped with a built-in universal 144 pin driver to accommodate large pin count devices. One universal adapter accommodates all devices with the same package type.

Stand-Alone Mode Unlike many other universal programmers in the industry, SuperPro 6100N is capable of operating in stand-alone mode. Under stand-alone mode, SuperPro 6100 can be operated by an inexperienced operator with minimal training. Once the project file is selected, the operator only has to insert a blank chip and remove the programmed chip upon beeping. This ensures a minimal chance that an operator will make a mistake. Users can also use clusters of stand-alone programmers to achieve high volume production. Last but not the least, stand-alone mode saves both the cost of PC and labor of the trained and qualified operator.

Tester for Logic Devices and SRAMs In addition to having a large device library, SuperPro 6100 programmer is also designed for IC testing of varioudevices such as TTL, CMOS Logic (74/4000 series), and SRAM memory devices.

Hardware and Electrical Specifications

Devices supported

EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU

Package types supported

DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON, EBGA, FBGA, FTBGA, VFBGA, BGA, CSP, SCSP, QFN, HVQFN etc.

PC interface

USB 2.0

Stand-alone memory

Compact FLASH Card

Power supply

AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

Dimensions

Main unit: 148(L) x 216(W) x 94(H) mm

Package: 301(L) x 252(W) x 145(H) mm

Weight

Main unit: Weight 3.5 lbs (1.6 Kg)

Package: Weight 6.2 lbs (2.8Kg)

Expanded Features

Operate multiple units to construct a concurrent multi-programming system. Cluster 1-15 units for flexible volume production.

Support devices with Vcc from 1.2V - 5V.

Support files up to 256 GB.

Over-current and over-voltage protection for safety of the chip and programmer hardware.

Only IC manufacturer approved programming algorithms used for high reliability.

Vcc verification (at +5% ~ -5% and +10% ~ -10%) enhances programming reliability.

Ac Acessories:

Main unit with a DIP48 adaptor, AC adaptor, USB2.0 cable, user manual, software CD, register card

Optional accessories: adaptor in varies packages, CF card for stand-alone operation.

Packing List:

1 * XELTEK SuperPro 6100N Programmer

1 * AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

1 * USB Cable

1 * CD Software

1 * DX0001 Adapter

1 * PLCC44 to DIP44 Adaptador

1 * PLCC32 to DIP32 Adaptador

1 * TSOP48 Adapter

1 * SOP44-DIP44 1.27mm (530mil) Adaptador

1 * SOP16-DIP16 (300mil) Adaptador

1 * SOP20-DIP20 (300mil) Adaptador

1 * SOP28-DIP28 (300mil) Adaptador

1 * TSSOP16-DIP16 (170mil) Adaptador

1 * TSSOP20-DIP20 (170mil) Adaptador

1 * TSSOP24-DIP24 (170mil) Adaptador

1 * TSSOP28-DIP28 (170mil) Adaptador

1 * SSOP20-DIP20 (220mil) Adaptador

1 * SSOP28-DIP28 (220mil) Adaptador

1 * SSOP34-DIP34 (220mil) Adaptador

1 * SOP8-DIP8 CNV-SOP20 (208mil) Adaptador

1 * Double SOP8-DIP16 CNV-SOP20 (208mil) Adaptador

1 * SOP20-DIP20 CNV-SOP20 (208mil) Adaptador

1 * SOP8-DIP8 CNV-SOP-DIP16 (150mil) Adaptador

1 * SOP16-DIP16 CNV-SOP-DIP16 (150mil) Adaptador

1 * PLCC44-DIP44

1 * PLCC44-DIP40

1 * PLCC32-DIP32

1 * PLCC28-DIP28

1 * PLCC28-DIP24

1 * PLCC20-DIP20

1 * SOP8-DIP8 Simple Adaptador

1 * QFN8 WSON8 Simple Adaptador

1 * SOP16/8-DIP8 REV4 Simple Adaptador

1 * MSOP8/SSOP8/SOP8/SOP16-DIP16 Simple Adaptador

1 * TSOP28Pin 0.65mm Adapter Board

1 * SOP28Pin 1.27mm Adapter Board

1 * TSOP20Pin 0.65mm Adapter Board

1 * SOP20Pin 1.27mm Adapter Board

1 * TSOP16Pin 0.65mm Adapter Board

1 * SOP16Pin 1.27mm Adapter Board

1 * TSOP14Pin 0.65mm Adapter Board

1 * SOP14Pin 1.27mm Adapter Board

1 * TSOP10Pin 0.65mm Adapter Board

1 * SOP10Pin 1.27mm Adapter Board

1 * TSOP8Pin 0.65mm Adapter Board

1 * SOP8Pin 1.27mm Adapter Board

1 * Multipurpose ISP-DuPont-Header Adapter

1 * Anti-Static Wristband Wrist Strap Band ESD Discharge PC Electricity Grounding

1 * LCD LED screen EDID code

1 * SOP8 Clamp Test

1 * IC Chip Extractor

DX5146 Adapter for XELTEK SuperPro 6100N

50519-02601-001 FFC/FPC Flip connector 26P 0.8mm 0.80mm pitch

Login to Download: * Device List

CH2016 Multifunctional 1 Drag 2 High Speed Burner

Offline or online, and TF memory card slot!

A mini portable burner for offline burning and copying!

FN multi-menu keys, can customize the burning operation steps, can set the save burning project, can get files from TF memory card burning, can immediately save the master card data into TF memory card, can set the body language, can set screen brightness, can set buzzer, can set screen saver time, boot time, etc.

Support device updates!

Support for 2425 93 EEPRM

Support SPI FLASH

Supporting AVR MCU

Support DATA FLASH

Size: 200mm*100m*0.06mm

Condition: New

Material: Polyethylene

Feature:

Use this non sticky film to protect smartphone glass/digitizer/LCD screen from scratches and dusts while repairing or to clean up the small dusts on the LCD before applying a new glass/digitizer.

Bright and clean, to prevent the product from pollution, corrosion, scratch when product, storage, transport.

Leaves no glue residue and no take sticky after peeling off.

Widely used For LCD, Screen, Display protective, with more than 95% transmittance.

Good adsorption capacity.

Package include:

1x Roll 200mm*100m Protective Sticky Film Tape

LVDS Cable for screen Dell N5040 N5050 M5040 V1550 P/N: 50.4IP02.001 50.4IP02.302 50.4IP02.002

XELTEK SuperPro 6100N (so not 6100)Universal Programmer 100,000+ devices supported

Login to Download: Download software

SuperPro 6100N is a cost-effective, reliable, and high-speed universal chip programmer. It is designed to communicate using USB 2.0 port for development requirement and can also work in standalone mode (without connecting to a PC) for production requirement. It has the largest device support count in the programming industry with 144 pin drivers to support high pin count chips.

Application and target customers: Programming houses, electronic repair, car repair shops, forensic and data recovery companies, medical devices, requirement for larger device support.

Advantages of SuperPro 6100N

Ultra Fast Programming Speed SuperPro 6100 is designed with high programming speed in mind. Our semiconductor manufacturer approved algorithms, precision and clean signals guarantee high programming yield. Special design was made to eliminate overshoot and ground bounce. Algorithms are performed with state machine architecture constructed with FPGA to achieve a ultra-high programming speed.

Largest Device Support Located in Silicon Valley, we keep good relationships with many major IC companies that are important for us to continuously support new devices. SuperPro 6100 currently supports more than 100,000 devices, which is the largest device library in the programming industry. Requested device algorithms can be added within a week - average lead time from other manufacturers is over two months.

Built-in 144 Pin Driver Most universal IC programmers are designed with 48 pin driver or less. Programmers with a 48 pin driver design need special adapters (pin mapping) to accommodate devices with more than 48 pins. Bottom boards needed for pin mapping can quickly increase production costs just to support one package type. SuperPro 6100N is equipped with a built-in universal 144 pin driver to accommodate large pin count devices. One universal adapter accommodates all devices with the same package type.

Stand-Alone Mode Unlike many other universal programmers in the industry, SuperPro 6100N is capable of operating in stand-alone mode. Under stand-alone mode, SuperPro 6100 can be operated by an inexperienced operator with minimal training. Once the project file is selected, the operator only has to insert a blank chip and remove the programmed chip upon beeping. This ensures a minimal chance that an operator will make a mistake. Users can also use clusters of stand-alone programmers to achieve high volume production. Last but not the least, stand-alone mode saves both the cost of PC and labor of the trained and qualified operator.

Tester for Logic Devices and SRAMs In addition to having a large device library, SuperPro 6100 programmer is also designed for IC testing of varioudevices such as TTL, CMOS Logic (74/4000 series), and SRAM memory devices.

Hardware and Electrical Specifications

Devices supported

EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU

Package types supported

DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON, EBGA, FBGA, FTBGA, VFBGA, BGA, CSP, SCSP, QFN, HVQFN etc.

PC interface

USB 2.0

Stand-alone memory

Compact FLASH Card

Power supply

AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

Dimensions

Main unit: 148(L) x 216(W) x 94(H) mm

Package: 301(L) x 252(W) x 145(H) mm

Weight

Main unit: Weight 3.5 lbs (1.6 Kg)

Package: Weight 6.2 lbs (2.8Kg)

Expanded Features

Operate multiple units to construct a concurrent multi-programming system. Cluster 1-15 units for flexible volume production.

Support devices with Vcc from 1.2V - 5V.

Support files up to 256 GB.

Over-current and over-voltage protection for safety of the chip and programmer hardware.

Only IC manufacturer approved programming algorithms used for high reliability.

Vcc verification (at +5% ~ -5% and +10% ~ -10%) enhances programming reliability.

Ac Acessories:

Main unit with a DIP48 adaptor, AC adaptor, USB2.0 cable, user manual, software CD, register card

Optional accessories: adaptor in varies packages, CF card for stand-alone operation.

Packing List:

1 * XELTEK SuperPro 6100N Programmer

1 * AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

1 * USB Cable

1 * CD Software

1 * DX0001 Adapter

1 * TSOP48 Adapter

1 * SOP44-DIP44 1.27mm (530mil) Adaptador

1 * SOP16-DIP16 (300mil) Adaptador

1 * SOP20-DIP20 (300mil) Adaptador

1 * SOP28-DIP28 (300mil) Adaptador

1 * TSSOP16-DIP16 (170mil) Adaptador

1 * TSSOP20-DIP20 (170mil) Adaptador

1 * TSSOP24-DIP24 (170mil) Adaptador

1 * TSSOP28-DIP28 (170mil) Adaptador

1 * SSOP20-DIP20 (220mil) Adaptador

1 * SSOP28-DIP28 (220mil) Adaptador

1 * SSOP34-DIP34 (220mil) Adaptador

1 * SOP8-DIP8 CNV-SOP20 (208mil) Adaptador

1 * Double SOP8-DIP16 CNV-SOP20 (208mil) Adaptador

1 * SOP20-DIP20 CNV-SOP20 (208mil) Adaptador

1 * SOP8-DIP8 CNV-SOP-DIP16 (150mil) Adaptador

1 * SOP16-DIP16 CNV-SOP-DIP16 (150mil) Adaptador

1 * PLCC44-DIP40

1 * PLCC32-DIP32

1 * PLCC28-DIP24

1 * PLCC20-DIP20

1 * SOP8-DIP8 Simple Adaptador

1 * QFN8 WSON8 Simple Adaptador

1 * SOP16/8-DIP8 REV4 Simple Adaptador

1 * MSOP8/SSOP8/SOP8/SOP16-DIP16 Simple Adaptador

1 * SSOP4-28PIN 0.65mm / SOP4-28PIN 1.27mm Simple Adaptador

1 * LCD LED screen EDID code

1 * SOP8 Clamp Test

1 * IC Chip Extractor

SQU OF68 universal car emulator supports IMMO/Seat occupancy sensor/Tacho Programs

SQU OF68 Universal Car Emulator Mini Parts Big Works

The SQU OF68 universal car emulator allows you to do:

Move the original immobiliser signal

Place the original immobiliser signal

Place the ESL, enable the car to start

ECK the EZS on the table

ECK the correctness of the airbag system

Art the tacho on the table

The SQU OF68 emulator comes with 68 programs that are dedicated to hundreds of car models and types of ECU.

You are allowed to choose from any of folllowing program:

1. Immo programs

2. Seat occupancy sensor programs

3. Tacho programs

The vast majority of programs can be used multiple times.

Program selection is effected by soldering jumpers from J1 to J7. To connect the emulator, please refer to specific installation manual.

Immo Programs:

1. VW automatic immo OFF (single use)

2. VW automatic immo ON (single use)

3. VW without CAN

4. VW - Hitachi

5. VW - Valve Code

6. VW EDC15 immo OFF (single use)

7. VW EDC15 immo ON (single use)

8. VW EDC16 K-LINE immo OFF (single use)

9. VW EDC16 K-LINE immo ON (single use)

10. VW EDC16 with CAN 1.9 2.0 TDI immo OFF (single use)

11. VW EDC16 with CAN 1.9 2.0 TDI immo ON (single use)

12. VW EDC16 with CAN 2.7 3.0 TDI immo OFF (single use)

13. VW EDC16 with CAN 2.7 3.0 TDI immo ON (single use)

14. VW ME7 immo OFF (single use)

15. VW ME7 immo ON (single use)

16. BMW EWS II and EWS III 3.2 systems

17. Chrysler

18. Citroen, Peugeot with CAN

19. Daewoo 1

20. Daewoo 2

21. Fiat without CAN

22. Fiat with CAN

23. FSO Polonez

24. Honda

25. Kia Sportage 2.0TD

26. Mercedes CR without CAN Infrared

27. Mercedes CR1 with CAN WSP

28. Mercedes CR1 with CAN EZS

29. Mercedes CR1 with CAN infrared

30. Mercedes CR2 with CAN WSP

31. Mercedes ESL - steering wheel column lock emulator

32. Mercedes ESL2 - steering wheel column lock emulator

33. Nissan NATS 4 and 5 32.

34. Opel immo with HC05

35. Renault with CAN

36. Renault without CAN

37. Renault without CAN old ECUs

38. Suzuki with X24C01 memory

39. Suzuki with OKI memory

40. Suzuki 93C56 memory

41. TMS 374 - Citroen, Peugeot, Renault

42. Yamaha

Seat Occupancy Sensor Programs:

1: BMW Europe from 2007 to 2010 Models: E60, E63, E64, E65, E70, E71, E81, E90, E92, E93 without installed child seat

2: Mercedes: E-class W211 from 2002 to 2004 with Temic airbag controller, S-class W220 from 2003 to 2005 without installed child seat

3: Mercedes: E-class W211 from 2002 to 2004 with Temic airbag controller, S-class W220 from 2003 to 2005 with installed child seat

4: Mercedes: A-class W168 from 1997 to 2001, C-class W202 from 1999 to 2001, Vito W638 up to 2003, ML 1999 with TRW airbag controller, E-class W210 up to 1999, before lifting with airbag OFF indicator without installed child seat

5: Mercedes: A-class W168 from 1997 to 2001-class W168, C-class W202 from 1999 to 2001, Vito W638 up to 2003, ML 1999 with TRW airbag controller, E-class W210 up to 1999, before lifting with airbag OFF indicator with installed child seat

6: Mercedes: E-class W210 from 1999 to 2003 with airbag OFF indicator after lifting, Vito W639 from 2002 to 2005, ML W163 from the year 2000, A-class W168 from 2002 to 2005, S-class W220 from 2000 to 2003, C-class W203 up to 2005, CLK W209, Vaneo without installed child seat

7: Mercedes: E-class W210 from 1999 to 2003 with airbag OFF indicator after lifting, Vito W639 from 2002 to 2005, ML W163 from the year 2000, A-class W168 from 2002 to 2005, S-class W220 from 2000 to 2003, C-class W203 up to 2005, CLK W209, Vaneo with installed child seat

8: BMW from 1997 to 2007 , Models from 1997 to 2003: E31, E36, E38, E39, E46, E53

Models from 2003 to 2007: E60, E63, E65, E87, E90 . without installed child seat

9: BMW from 1997 to 2007. Models from 1997 to 2003: E31, E36, E38, E39, E46, E53

Models from 2003 to 2007: E60, E63, E65, E87, E90 . with installed child seat

10: Mini Cooper from 2002 to 2005 without installed child seat

11: Mini Cooper from 2002 to 2005 with installed child seat

12: Mazda: Premacy, MX-5, 626, 323, 6 without installed child seat

13: Mazda: Premacy, MX-5, 626, 323, 6 with installed child seat

Tacho Programs:

1. Audi Q7 and A6

2. Citroen C4 Picasso

3. EMF Display

4. Renault Kangoo 3 Display

5. Renault Scenc II, Espace IV Tacho

6. Renault Scenic Full

7. Renault Scenic III + Navi

8. VW Passat B6

Package:

1pc x SQU OF68 Universal Car Emulator

1pc x CD for user manuel

DX3057-8 Adapter for XELTEK SuperPro 6100N

Kryonaut Thermal Grizzly 1g