LVDS Cable for screen Lenovo Y470 P/N: DC020017610

Handheld stabilizer L08 mobile phone self timer stick Bluetooth single axis anti shake shooting tripod bracket

Product Parameters

Product Name: Heat Shrink Tube Set

Product material: Irradiation cross-linked modified polyolefin resin

Tensile strength: >10.4mpv

Product color: yellow, blue, black, green, red

Uses: Widely used in wire connection, insulation protection of solder joints, wire

end treatment resistance, capacitor insulation protection, wire mark and

end metal pipe, rod rust and corrosion protection, antenna protection

LVDS Cable for screen Lenovo G50-45 G50-70 G50-30 Z50-70 Z50-45 Ver.1 p/n: 90205236 DC02001MC00

100% Brand new and high quality

The copper has high purity coefficient of thermal conductivity as high as 407 w/ (m?K)

With this copper pad to greatly lower GPU temperatures, can be used for graphics, northbridge, CPU chips.

It can be applied to HP, Dell, Acer, Thinkpad and all laptop and computer heatsink solution!

Material: Copper

Color: As the picture

Size: Approx. 1.5T x 15 x 15(T*L*W)

How to use: First daub a little thermal silicone grease (FYI: Do not use the low-end silicone grease), then put the right size copper shims, then daub a little thermal silicone grease again, last install the heatsink and tighten the screws

Dinghua Model:DH-A1L-C BGA rework station

Buy BGA repaired Nozzle: * BGA repaired Nozzle Operation manual

Specification:

Total Power 4900W

Top heater 800W

Bottom heater Second heater 1200W,IR preheating

2700w, digital thermostat soldering iron

80W

Power AC220V10% 50/60Hz

Dimensions L650W700H650 mm

Positioning V-groove, PCB support can be adjusted in any direction with

external universal fixture

Temperature control K Sensor, Closed loop

Temp accuracy 1?

PCB size Max 500450 mm Min 2222 mm

BGA chip 22-8080mm

Minimum chip spacing 0.15mm

External Temperature Sensor 1(optional)

Net weight 55kg

Feature:

1.Embedded Industrial PC, high definition touch screen interface, PLC control, and

instant profile analysis function. Real-time settings and actual temperature profile

display can be used to analyzed and correct parameters if necessary.

2.It uses precise K-type close circuit control and automatic temperature adjustment

system, with PLC and temperature module to enable precision temperature control of

1 deg C. External temperature sensor enables temperature monitoring and accurate

analysis of real time temperature profile.

3.V-groove PCB support for rapid, convenience and accurate positioning that fits for

all kinds of PCB board.

4.Flexible and convenient removable fixture on the PCB board which protects and

prevent damage to PCB. It can also adapt to rework various BGA packages.

5.Various sizes of BGA nozzles, which can be adjusted 360 degree for easy

installation and replacement;

6.Three temperature areas can independently heat and are multiple controllable and

adjustable to ensure best integration of different temperature areas. Heating

temperature, time, angle, cooling and vacuuming can all be set on the interface.

7.There are 6-8 levels of variable and constant temperature controls. Massive storage

of temperature curves which are Instant accessible according to different BGA. Curve

analysis, setting and adjustment are all accessible via touch screen. Three heating

areas adopts independent PID calculation to control heating process to enable more

accurate and precise temperature control.

8.It uses high powered blower to enable fast cooling of PCB board and prevent it from

deformation. There are also internal vacuum pump and external vacuum pen to assist

with fetching the BGA chip.

9.Laser positioning, fast and effectively fix PCB

10.USB output interface.

11.Equipped with constant temperature digital display soldering iron

12.Including Voice "early warning" function. 5-10 seconds before the completion of

uninstalling or welding, voice reminder / warning to get the workers prepared.

Cooling system will start after vertical wind stopped heating. When the temperature

drops to room temperature, the cooling process will stop, so that the machine will not

age after

heated up.

13.HD Display screen+camera + support. With the equipment, we can see the

melting ball of outermost row very clear.

14.CE certification, with emergency switch and automatic power-off protection

device when emergency happens.

Super Strong Suction Cup Tool LCD Screen Opening Pliers For IPhone 5C 5S 6 6Plus

Compatible with iPhone 6 6S Plus 6 5S 5C 5 Color As the pictures shown

Size 17*8.5*3.5 cm Date Code 16+

Package/Case 1 PCS Description Bulk new

Specification:

100% Brand new and high quality.

Material: Alloy Steel

Color: Random

Quantity: 17pcs/Set

Features: Portable, Training Tools, Unlocking Tool

Description:

Made of high quality material, durable and anti-rust.

Comes with storage bag, portable and convenient to carry around.

Ideal for mechanic and locksmiths to get out broken keys.

Trying to get a broken key out of a lock can be tricky. This is a broken key removal set that is great for your home or office and a must have for anyone.

Package included:

17pcs/Set Lock Pick Tools With Storage Bag (Random Color)

Notice:

1.Please allow 1-3mm error due to manual measurement,Please make sure you do not mind before you bid.

2.The colors may be a little difference for the different monitors displays, please understand.

Login to Download: * Manual Download

Product Description

The ultrasonic cleaner is a microprocessor-controlled device that uses ultrasonic or high frequency sound waves to clean jewelry and other delicate items. Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signals in fluid. Microscopic bubbles that expand and rapidly collapse cause cavitation, which creates an effective cleaning action on the surface of object being cleaned. Additionally, the bubbles are small enough to penetrate even microscopic crevices, cleaning them thoroughly and consistently.

High efficiency saves cleaning solvent, thermal energy, work place and labor!

Six sets of built-in powerful transducers can strengthen the ultrasonic power and make superior cleaning outcome. It is utilization of digital program in ultrasonic cleaner to control the unit, according to the quantity and condition of the items to be cleaned to choose a working cycle time. As a result, it is more convenient and efficient than hand wash, steam cleaners, high pressure water jet cleaning or other machines.

Advanced Brushed Stainless Steel Cleaning Tank to avoid corrosion water stain and keep the tank looking always new.

(In comparison, the common stainless steel cleaning tanks will be dirty yellow corrosion water stain on the surface after a long time of using, and it's hard to be removed.)

Application

Professional Use:

Medical and Dental Clinics, Tattoo Shops, Scientific Labs and Golf Clubs.

Jewelers, Opticians, Watchmakers, Antique Dealers and Electronics Workshops etc.

Personal or Home Use:

Jewelry: Earrings, Necklace, Rings, Bracelets and Diamonds.

Glasses and Timepieces: Glasses, Sunglasses, Optical Lenses, Contact Lens Accessories, Watch Chains and Waterproof Watches.

Commodities: Tattoo Guns and Tubes, Electric Shaver Heads, Razor Blades, Dentures, Combs and Toothbrushes.

Stationery: Pen-heads, Printer-heads, Inkjet Cartridges and Seals.

Metal Articles: Ancient Coins, Badges, Valves, Machine Nozzles, Electronics Components and Mechanical Parts.

Metal Dishware: Forks, Knives, Spoons and Other Small Silverwares etc.

Multifunctional Repair /Soldering Mat

Silicone Heat Mat Set: * Silicone Heat Mat Repair Insulation Kit Mobile Computer Tablets Phones Fix Pad

Insulation, Retardant, Anti-skid, Anti-static, Anti-corrosion, Magnetic Storage, Odorless, Foldable

FEATURES:

?500C Heat Resistant

?Strong Classification and Storage Performance, make your working desk clean and tiny and improve work efficiency

?Heat Accumulation Characteristics: Accumulate heat on this pad. It will be quicker and more convenient while soldering the CPU

?Eco-friendly Silicone: Non-toxic, odorless. The mat is made of high quality silicone. It resists corrosion and out of shape. Its texture is soft, solid and durable to protect soldering iron tip.

?Easy to clean: It easily cleaned nice with soap and water or even rubbing alcohol in daily use. Mats environmental safety is conducive to improving the working environment of technicians.

?Professional Heat Isolation Mat: And you can also use it big pads as pot holders for pots, pans, trays...

?You can even place it that is heat-resistant, non-slip on tables or counters for pots and pans.

SPECIFICATIONSS:

-Item Name: Multipurpose Repair pad/Soldering Mat

-Dimension: 340*230*5mm

-Weight: 235g

-Material: Silicone

-Color: Blue

LVDS Cable for screen HP DV9000 P/N: 432946-001 DD0AT9LC000 DD0AT9LC001 MECDDOAT9LC1081A

LEAD-FREE TITANIUM ALLOY SOLDERING POT

Operation instruction

Login to Download: * Manual Download

Our Lead-free titanium alloy soldering pot passed by SGS, built-in advanced microcomputer digital control and display system, make it more safe, more steady and more accurate. Its a good tool for electronic fields.

FEATURES:

* With big power heater, only within 25minutes to reach 450? from room temperature, (Different items with a little different heating time.)

* With advanced microcomputer digital control and double displays. make it more accurate heating and fast temperature returning capability.

* The boiler made of titanium alloy, can resist high temperature, cauterization and abrasion, largely prolong the life.

* With temperature setting and locking function, will not be affected by wrong operation.

* The setting value will be saved for long time, and can not be affected by power on or off. With auto sleeping function, prolong the machines life.

* With malfunction alarm.

Working conditions:

Working voltage: AC22010V

Working temperature: 0-55?

Working temperature: < 90% no dew

WARNING:

1. The soldering pot must be put on the balanced and ovenproof working desk, prevent the glowing tin go out of the pot. And also take care of the hot tin and the hot body.

2. Do not put other pb items together with the lead-free soldering pot, prevent pb pollution. If cause the products do not eligible, then we wont take on this liability.

3. It cant be used where it will be exposed to ignitable or corrosive materials and gases.

4. If you need to move the soldering pot, please turn off the switch and move it after the pot turn cool.

5. The pot is a hot equipment, if you no need to use, please shut off the switch, and put out the plug.

6. In order to keep it safe and prolong the life, its better stop working after it has worked more than 12hours.

7. Do not heating the pot when its empty, and use the power supplier with grounding cord.

8. The pot is made of titanium which import from Japan, after it is heated by hot temperature, the color will turn to golden or blue, its natural for the material.

OPERATION:

1. Set temperature:

Press the * button, the left LED will display ?,and the right LED will display numerical value, then press the + or -button, temperature will go up or down. Press * button, the value of temperature will be saved.

2. Microcomputer adjusting itself

If the temperature has obvious discrepancy, we can adjust the inside P, I, D value, it will make the pot with accurate control, the followings are two ways of P, I, D adjusting:

A. Auto adjusting

Keep pressing + button, then press * , the left LED will display AT; the right LED will display _ _ _. Then press ? or + change the _ _ _ to AT, this time please press * for 3 times, then the pot will begin P, I, D adjusting itself. Usually it will take for about 15-30 minutes to finish this adjusting, during this adjusting the temperature will fluctuate obviously, but its no wonder. Usually, we do not recommend the users use P, I, D adjusting.

B. Adjust the value of P, I, D by manual (Do not advise users use this way, its fit for the engineers who know P, I, D very well, otherwise maybe cause bad temperature control. If really need, we just recommend the first way.) The operation as follows: Keep pressing + , then press * , the LED will display above (A) setting mode, press * again the LED will display the value of P, I, D. Manual adjusting just can be set the original value.

Remarks: The original of P, I, D value is: P=20, I=80, D=20; If the temperature in

confusion, please set the P, I, D value as original value.

3. Calibration between display and real temperature.

After the heater was replaced or the sensor was oxidated, the temperature will occur warp, the users need to calibrate the pot termly, and as the follow steps:

A. Press CAL button (If your pot without this button, please open the front cover, there is a black button on the PCB of temperature control, that is CAL), the right LED will display OFF, keep pressing ? , and press * at the same time, the left LED will display LOC, the right LED will display -3-, then press * for 3 times (just this button, do not press any other buttons), the LED will display: The first time: Left ?H, right 999; The second time: Left ?L, right 0; The third time: Left ?L, then please input the value of temperature compensation. This value is the warp between display temperature and real temperature. For example, the real temperature is more 5? higher than the display temperature, it can use ? to set -5; If the real temperature is 5? less than the display temperature, it can use + to set 5.

B. The warp temperature is the value to input, after finish setting, press * again, the set value will be saved. Then press CAL (If your pot without this button, please open the front cover, there is a black button on the PCB of temperature control, that is CAL), it will come into the ordinary display mode.

TROUBLE SHOOTING:

1. Turn on the switch but no reflection, please check the fuse, and the plug.

2. The LED display setting temperature, but the pot temperature wont go up, it means that the heater is open circuit.

3. The pot display Err when the power switch is turned on, it means that the sensor is open circuit.