Teensy 3.2 Development Board

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.2 comes pre-flashed with a bootloader so you can program it using the onboard USB connection: No external programmer needed! You can program for the Teensy in your favourite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!

The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32-bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also 4 separate interval timers plus a delay timer! Oh yeah, and all pins have interrupt capability. Also, it can provide system voltage of 3.3V to other devices at up to 100mA.

All of this functionality is jammed into a 1.4 x 0.7 inch board with all headers on a 0.1" grid so you can slap in on a breadboard and get to work! The Teensy 3.2 adds a more powerful 3.3-volt regulator, with the ability to directly power an ESP8266 Wifi, WIZ820io Ethernet, and other 3.3V add-on boards that require a little more power. Additionally, if it is used within the Teensy 3.1 limits of operation, the Teensy 3.2 and 3.1 are interchangeable!

Note: This does not come with a USB cable, please check below for an appropriate one.

Dimensions: 1.4 x 0.7" (~35 x 18 mm)

Features:

32 bit ARM Cortex-M4 72 MHz CPU (M4 = DSP extensions)

256K Flash Memory, 64K RAM, 2K EEPROM

21 High-Resolution Analog Inputs (13 bits usable, 16-bit hardware)

34 Digital I/O Pins (5V tolerance on Digital Inputs)

12 PWM outputs

7 Timers for intervals/delays, separate from PWM

USB with dedicated DMA memory transfers

3 UARTs (serial ports)

SPI, I2C, I2S, CAN Bus, IR modulator

I2S (for high-quality audio interface)

Real Time Clock (with user-added 32.768 crystal and battery)

16 DMA channels (separate from USB)

Touch Sensor Inputs

Buy DuPont cable jumper: * Male-Male Male-Female Female-Female

Brand new and high quality.

3lot 40P Color Jumper Cable Dupont Line, it contains 120pcs jumper cables in total.

Length : 20cm

1p-1p pin header

A row of 40 root

Compatible with 2.54mm spacing pin headers

Package Included:

40pcs DuPont line of male-to-female

40pcs DuPont line of male-to-male

40pcs DuPont line of female-to-female

LVDS Cable for screen Packard Bell EasyNote TJ62 TJ65 TJ72 p/n: 50.4BU01.001 50.4BU01.002 50.4BU

LVDS Cable for screen Lenovo Y470 P/N: DC020017610

Handheld stabilizer L08 mobile phone self timer stick Bluetooth single axis anti shake shooting tripod bracket

Product Parameters

Product Name: Heat Shrink Tube Set

Product material: Irradiation cross-linked modified polyolefin resin

Tensile strength: >10.4mpv

Product color: yellow, blue, black, green, red

Uses: Widely used in wire connection, insulation protection of solder joints, wire

end treatment resistance, capacitor insulation protection, wire mark and

end metal pipe, rod rust and corrosion protection, antenna protection

LVDS Cable for screen Lenovo G50-45 G50-70 G50-30 Z50-70 Z50-45 Ver.1 p/n: 90205236 DC02001MC00

100% Brand new and high quality

The copper has high purity coefficient of thermal conductivity as high as 407 w/ (m?K)

With this copper pad to greatly lower GPU temperatures, can be used for graphics, northbridge, CPU chips.

It can be applied to HP, Dell, Acer, Thinkpad and all laptop and computer heatsink solution!

Material: Copper

Color: As the picture

Size: Approx. 1.5T x 15 x 15(T*L*W)

How to use: First daub a little thermal silicone grease (FYI: Do not use the low-end silicone grease), then put the right size copper shims, then daub a little thermal silicone grease again, last install the heatsink and tighten the screws

Dinghua Model:DH-A1L-C BGA rework station

Buy BGA repaired Nozzle: * BGA repaired Nozzle Operation manual

Specification:

Total Power 4900W

Top heater 800W

Bottom heater Second heater 1200W,IR preheating

2700w, digital thermostat soldering iron

80W

Power AC220V10% 50/60Hz

Dimensions L650W700H650 mm

Positioning V-groove, PCB support can be adjusted in any direction with

external universal fixture

Temperature control K Sensor, Closed loop

Temp accuracy 1?

PCB size Max 500450 mm Min 2222 mm

BGA chip 22-8080mm

Minimum chip spacing 0.15mm

External Temperature Sensor 1(optional)

Net weight 55kg

Feature:

1.Embedded Industrial PC, high definition touch screen interface, PLC control, and

instant profile analysis function. Real-time settings and actual temperature profile

display can be used to analyzed and correct parameters if necessary.

2.It uses precise K-type close circuit control and automatic temperature adjustment

system, with PLC and temperature module to enable precision temperature control of

1 deg C. External temperature sensor enables temperature monitoring and accurate

analysis of real time temperature profile.

3.V-groove PCB support for rapid, convenience and accurate positioning that fits for

all kinds of PCB board.

4.Flexible and convenient removable fixture on the PCB board which protects and

prevent damage to PCB. It can also adapt to rework various BGA packages.

5.Various sizes of BGA nozzles, which can be adjusted 360 degree for easy

installation and replacement;

6.Three temperature areas can independently heat and are multiple controllable and

adjustable to ensure best integration of different temperature areas. Heating

temperature, time, angle, cooling and vacuuming can all be set on the interface.

7.There are 6-8 levels of variable and constant temperature controls. Massive storage

of temperature curves which are Instant accessible according to different BGA. Curve

analysis, setting and adjustment are all accessible via touch screen. Three heating

areas adopts independent PID calculation to control heating process to enable more

accurate and precise temperature control.

8.It uses high powered blower to enable fast cooling of PCB board and prevent it from

deformation. There are also internal vacuum pump and external vacuum pen to assist

with fetching the BGA chip.

9.Laser positioning, fast and effectively fix PCB

10.USB output interface.

11.Equipped with constant temperature digital display soldering iron

12.Including Voice "early warning" function. 5-10 seconds before the completion of

uninstalling or welding, voice reminder / warning to get the workers prepared.

Cooling system will start after vertical wind stopped heating. When the temperature

drops to room temperature, the cooling process will stop, so that the machine will not

age after

heated up.

13.HD Display screen+camera + support. With the equipment, we can see the

melting ball of outermost row very clear.

14.CE certification, with emergency switch and automatic power-off protection

device when emergency happens.

Super Strong Suction Cup Tool LCD Screen Opening Pliers For IPhone 5C 5S 6 6Plus

Compatible with iPhone 6 6S Plus 6 5S 5C 5 Color As the pictures shown

Size 17*8.5*3.5 cm Date Code 16+

Package/Case 1 PCS Description Bulk new

Specification:

100% Brand new and high quality.

Material: Alloy Steel

Color: Random

Quantity: 17pcs/Set

Features: Portable, Training Tools, Unlocking Tool

Description:

Made of high quality material, durable and anti-rust.

Comes with storage bag, portable and convenient to carry around.

Ideal for mechanic and locksmiths to get out broken keys.

Trying to get a broken key out of a lock can be tricky. This is a broken key removal set that is great for your home or office and a must have for anyone.

Package included:

17pcs/Set Lock Pick Tools With Storage Bag (Random Color)

Notice:

1.Please allow 1-3mm error due to manual measurement,Please make sure you do not mind before you bid.

2.The colors may be a little difference for the different monitors displays, please understand.

Login to Download: * Manual Download

Product Description

The ultrasonic cleaner is a microprocessor-controlled device that uses ultrasonic or high frequency sound waves to clean jewelry and other delicate items. Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signals in fluid. Microscopic bubbles that expand and rapidly collapse cause cavitation, which creates an effective cleaning action on the surface of object being cleaned. Additionally, the bubbles are small enough to penetrate even microscopic crevices, cleaning them thoroughly and consistently.

High efficiency saves cleaning solvent, thermal energy, work place and labor!

Six sets of built-in powerful transducers can strengthen the ultrasonic power and make superior cleaning outcome. It is utilization of digital program in ultrasonic cleaner to control the unit, according to the quantity and condition of the items to be cleaned to choose a working cycle time. As a result, it is more convenient and efficient than hand wash, steam cleaners, high pressure water jet cleaning or other machines.

Advanced Brushed Stainless Steel Cleaning Tank to avoid corrosion water stain and keep the tank looking always new.

(In comparison, the common stainless steel cleaning tanks will be dirty yellow corrosion water stain on the surface after a long time of using, and it's hard to be removed.)

Application

Professional Use:

Medical and Dental Clinics, Tattoo Shops, Scientific Labs and Golf Clubs.

Jewelers, Opticians, Watchmakers, Antique Dealers and Electronics Workshops etc.

Personal or Home Use:

Jewelry: Earrings, Necklace, Rings, Bracelets and Diamonds.

Glasses and Timepieces: Glasses, Sunglasses, Optical Lenses, Contact Lens Accessories, Watch Chains and Waterproof Watches.

Commodities: Tattoo Guns and Tubes, Electric Shaver Heads, Razor Blades, Dentures, Combs and Toothbrushes.

Stationery: Pen-heads, Printer-heads, Inkjet Cartridges and Seals.

Metal Articles: Ancient Coins, Badges, Valves, Machine Nozzles, Electronics Components and Mechanical Parts.

Metal Dishware: Forks, Knives, Spoons and Other Small Silverwares etc.