Product Description

Package includes: 1PCS X SOP56 base board

SOP56 Programmer Adapter SOP56-DIP48 Socket for TL866

Stock: in stock

Condition: NEW

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

Altera USB Blaster Download Cable FPGA CLPD NIOS JTAG-Original Rev.C Hardware

Login to Download: Download software

* 100% same as Original Altera USB Blaster Hardware Design! * Much faster & reliable than cheap low-end USB Blaster

Q: Why is this Altera programmer more expensive than those cheaper Altera programmers?

A: This Altera USB blaster is designed based on 100% original Altera USB blaster hardware soltion: FTDI's FT245+ Altera's EPM CPLD chip solution. Unlike those cheap CY hardware solution USB Blaster. The original design uses FDTI+CPLD soltuion, which is the most reliable and fast design.

Q: Is the original hardware design solution better?

A: Yes, absolutely. The original Altera USB Blaster's hardware design is much stable and faster when programming the Altera CLPD/FPGA chips. It's designed to last, providing professional download speed and stable performance.

Q: How do I distinguish the original hardare solution USB Blaster from the cheaper ones?

A: Size & price. Orginal hardware platform uses FTDI's FT245+ Altera's EPM CPLD solution, which means definitely PCB bigger size. For those so-called "Mini" type USB Blaster, they're 100% cheap low-end programmer, which can get really hot on its surface when running. For the price, even the single FTDI chip's cost is much higher than the complete low-end altera programmer set.

100% same hardware platform designed from original Altera USB Blaster. Using FTDI's FT245+Altera EPM CPLD chip soltuion, the most reliable & fast solution as Altera USB Blaster download cable.

Directly uses original Altera USB Driver.

Supported OS: Windows 8, Windows 7, Windows Vista, Windows XP & 2000

Provide much more stable & fast programming speed for your Altera system design work.

Support JTAG I/O voltage between 1.5V-5V

Support SignalTapII Embedded Logic Analyzer function

Support ALL Altera series components , including all CPLD and FPGA devices.

Key Features:

Supported target voltage : 1.5V-5V

Support all ALTERA deveice.

CPLD:MAX 3000A?MAX 7000A?MAX 7000B?MAX 7000S?MAX 9000?MAX 9000A and MAX II.

FPGA:Stratix? Stratix II?Stratix GX?Cyclone?Cyclone II?Cyclone III?ACEX 1K?APEX II?APEX 20K?APEX 20KE?APEX 20KC?FLEX 10K?FLEX 10KE?FLEX 10KA?FLEX 6000?FLEX 8000?EPCS1?EPCS4?EPCS16?EPCS64EPC1?EPC4?EPC8?EPC16

Support JTAG,AS, PS mode:

Under JTAG mode:Cyclone?Cyclone II?Cyclone III?Stratix?Stratix II?ACEX 1K?APEX II?APEX 20K?APEX 20KE?APEX 20KC?FLEX 10K?FLEX 10KE?FLEX 10KA?FLEX 6000,FLEX 8000?MAX 3000A?MAX 7000A?MAX 7000B?MAX 7000S?MAX 9000?MAX 9000A and MAX II.

AS mode:EPCS1?EPCS4?EPCS16?EPCS64

PS mode:Stratix?Stratix II?Stratix GX.

Support NiosII embeded core based debug,with this debugger, there will be no warning windows poped up duringthe NiosII debug.

High performance, 10 times faster than ByteBlasterII !!

Driver Install Process:

1> Connect the device, and manually set the driver location to your Quartus install path, for example: C:\altera\quartus\drivers\usb-blaster

2> Run Quartus, and select the USB Blaster at Tools > Programmers, select the USB Blaster from HardwareSetup panel.

Package Included:

1 x Altera USB Blaster programmer (original hardware design solution)

1 x 10-Pin Flex cable

1 x USB Cable

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

DX3032 Adapter for XELTEK SuperPro 6100N

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

XELTEK SuperPro 6100N (so not 6100)Universal Programmer 100,000+ devices supported

Login to Download: Download software

SuperPro 6100N is a cost-effective, reliable, and high-speed universal chip programmer. It is designed to communicate using USB 2.0 port for development requirement and can also work in standalone mode (without connecting to a PC) for production requirement. It has the largest device support count in the programming industry with 144 pin drivers to support high pin count chips.

Application and target customers: Programming houses, electronic repair, car repair shops, forensic and data recovery companies, medical devices, requirement for larger device support.

Advantages of SuperPro 6100N

Ultra Fast Programming Speed SuperPro 6100 is designed with high programming speed in mind. Our semiconductor manufacturer approved algorithms, precision and clean signals guarantee high programming yield. Special design was made to eliminate overshoot and ground bounce. Algorithms are performed with state machine architecture constructed with FPGA to achieve a ultra-high programming speed.

Largest Device Support Located in Silicon Valley, we keep good relationships with many major IC companies that are important for us to continuously support new devices. SuperPro 6100 currently supports more than 100,000 devices, which is the largest device library in the programming industry. Requested device algorithms can be added within a week - average lead time from other manufacturers is over two months.

Built-in 144 Pin Driver Most universal IC programmers are designed with 48 pin driver or less. Programmers with a 48 pin driver design need special adapters (pin mapping) to accommodate devices with more than 48 pins. Bottom boards needed for pin mapping can quickly increase production costs just to support one package type. SuperPro 6100N is equipped with a built-in universal 144 pin driver to accommodate large pin count devices. One universal adapter accommodates all devices with the same package type.

Stand-Alone Mode Unlike many other universal programmers in the industry, SuperPro 6100N is capable of operating in stand-alone mode. Under stand-alone mode, SuperPro 6100 can be operated by an inexperienced operator with minimal training. Once the project file is selected, the operator only has to insert a blank chip and remove the programmed chip upon beeping. This ensures a minimal chance that an operator will make a mistake. Users can also use clusters of stand-alone programmers to achieve high volume production. Last but not the least, stand-alone mode saves both the cost of PC and labor of the trained and qualified operator.

Tester for Logic Devices and SRAMs In addition to having a large device library, SuperPro 6100 programmer is also designed for IC testing of varioudevices such as TTL, CMOS Logic (74/4000 series), and SRAM memory devices.

Hardware and Electrical Specifications

Devices supported

EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU

Package types supported

DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON, EBGA, FBGA, FTBGA, VFBGA, BGA, CSP, SCSP, QFN, HVQFN etc.

PC interface

USB 2.0

Stand-alone memory

Compact FLASH Card

Power supply

AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

Dimensions

Main unit: 148(L) x 216(W) x 94(H) mm

Package: 301(L) x 252(W) x 145(H) mm

Weight

Main unit: Weight 3.5 lbs (1.6 Kg)

Package: Weight 6.2 lbs (2.8Kg)

Expanded Features

Operate multiple units to construct a concurrent multi-programming system. Cluster 1-15 units for flexible volume production.

Support devices with Vcc from 1.2V - 5V.

Support files up to 256 GB.

Over-current and over-voltage protection for safety of the chip and programmer hardware.

Only IC manufacturer approved programming algorithms used for high reliability.

Vcc verification (at +5% ~ -5% and +10% ~ -10%) enhances programming reliability.

Ac Acessories:

Main unit with a DIP48 adaptor, AC adaptor, USB2.0 cable, user manual, software CD, register card

Optional accessories: adaptor in varies packages, CF card for stand-alone operation.

Packing List:

1 * XELTEK SuperPro 6100N Programmer

1 * AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

1 * USB Cable

1 * CD Software

1 * DX0001 Adapter

1 * PLCC44 to DIP44 Adaptador

1 * PLCC32 to DIP32 Adaptador

1 * TSOP48 Adapter

1 * SOP44-DIP44 1.27mm (530mil) Adaptador

1 * SOP16-DIP16 (300mil) Adaptador

1 * SOP20-DIP20 (300mil) Adaptador

1 * SOP28-DIP28 (300mil) Adaptador

1 * TSSOP16-DIP16 (170mil) Adaptador

1 * TSSOP20-DIP20 (170mil) Adaptador

1 * TSSOP24-DIP24 (170mil) Adaptador

1 * TSSOP28-DIP28 (170mil) Adaptador

1 * SSOP20-DIP20 (220mil) Adaptador

1 * SSOP28-DIP28 (220mil) Adaptador

1 * SSOP34-DIP34 (220mil) Adaptador

1 * SOP8-DIP8 CNV-SOP20 (208mil) Adaptador

1 * Double SOP8-DIP16 CNV-SOP20 (208mil) Adaptador

1 * SOP20-DIP20 CNV-SOP20 (208mil) Adaptador

1 * SOP8-DIP8 CNV-SOP-DIP16 (150mil) Adaptador

1 * SOP16-DIP16 CNV-SOP-DIP16 (150mil) Adaptador

1 * PLCC44-DIP44

1 * PLCC44-DIP40

1 * PLCC32-DIP32

1 * PLCC28-DIP28

1 * PLCC28-DIP24

1 * PLCC20-DIP20

1 * SOP8-DIP8 Simple Adaptador

1 * QFN8 WSON8 Simple Adaptador

1 * SOP16/8-DIP8 REV4 Simple Adaptador

1 * MSOP8/SSOP8/SOP8/SOP16-DIP16 Simple Adaptador

1 * TSOP28Pin 0.65mm Adapter Board

1 * SOP28Pin 1.27mm Adapter Board

1 * TSOP20Pin 0.65mm Adapter Board

1 * SOP20Pin 1.27mm Adapter Board

1 * TSOP16Pin 0.65mm Adapter Board

1 * SOP16Pin 1.27mm Adapter Board

1 * TSOP14Pin 0.65mm Adapter Board

1 * SOP14Pin 1.27mm Adapter Board

1 * TSOP10Pin 0.65mm Adapter Board

1 * SOP10Pin 1.27mm Adapter Board

1 * TSOP8Pin 0.65mm Adapter Board

1 * SOP8Pin 1.27mm Adapter Board

1 * Multipurpose ISP-DuPont-Header Adapter

1 * Anti-Static Wristband Wrist Strap Band ESD Discharge PC Electricity Grounding

1 * LCD LED screen EDID code

1 * SOP8 Clamp Test

1 * IC Chip Extractor

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

DX5146 Adapter for XELTEK SuperPro 6100N

DX3022 Adapter for XELTEK SuperPro 6100N

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock