• Show Sidebar

There are 2324 products.

Active filters

  • Categories: Laptop Parts, Repair tool
  • Categories: Other BGA Chips & ICs
wishlist
Compare
Quickview

INTEL JG82845GV SL8DA

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000992
€14.30

INTEL JG82845GV SL8DA

wishlist
Compare
Quickview

HC06 Wireless Bluetooth Arduino PI JYMCU Serial RF 5V Transeiver Module

Features:

100% brand new and high quality HC-06 bluetooth RF transceiver module

With VCC, GND, TXD, RXD foot for the bluetooth.

With LED indicator light.

3.3V LDO baseboard.

Input voltage 3.3-6V, the input voltage more than 7V is prohibited.

Unpaired current is about 30mA, matched current is about 10mA.

Interface level 3.3 V, can be connected directly to a variety of single chip microcomputer (51, AVR, PIC, ARM, MSP430, etc.)

5V microcontroller can also be connected directly, without MAX232 nor through MAX232.

Open to effective distance of 10 meters, over 10 meters is also possible, but not of this the quality of the connection of the distance do to ensure

The pair later when full-duplex serial use, do not need to know anything about the Bluetooth protocol, but only supports 8 data bits, 1 stop bit, no parity communication format, which is the most commonly used communication format does not support other formats.

Support to establish a Bluetooth connection through AT commands set the baud rate, passkey, set parameters are saved after.

Specifications:

Size: Approx. 43mm x 15mm

Input voltage: 3.6-6V

Working current: matching for 30 mA, matching the communication for 10 mA

Output Power Class: Class 2

Package Includes:

1 piece HC-06 bluetooth RF transceiver module

CH001925
€7.46

HC-06 Wireless Bluetooth Arduino PI JY-MCU Serial RF 5V Transeiver Module

wishlist
Compare
Quickview

Winbond W25Q16BVSIG

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000999
€3.45

Winbond W25Q16BVSIG

wishlist
Compare
Quickview

SAMSUNG K4J10324QDHC14

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH001000
€3.45

SAMSUNG K4J10324QD-HC14

wishlist
Compare
Quickview

900MTI KINGBOX 936 leadfree soldering iron head thermostatic head

Taiwan lead-free high quality 936 iron head

Characteristic:

1. special cast iron process, corrosion resistance, oxidation resistance, especially for long life.

2. strong immersion prolonged, easy to melt, Shangxi, solder joint round.

3. ? uniform inductance, stable quality, lead-free material.

4. lead-free environmental production, has passed the SGS test.

All soldering stations used in the 900M-T series

Such as table machine, 936 series welding platform

900M series lead-free soldering iron

? made of pure copper components, high thermal conductivity, fast heat transfer

? special iron surface plating, high temperature resistance, corrosion resistance

Special process, suitable for lead-free solder welding

? strong tin capacity, no oxidation, no tin, no tin, tin climbing phenomenon

? the outer layer is bright and delicate and very strong in rust resistance

? this product has passed the SGS environmental protection test

Life of soldering iron head

The life of the iron head is determined by the number of welds, and the length of life guaranteed depends on the coating thickness of the head. The thicker the coating, the longer the life of the iron head, but the heat transfer efficiency will be greatly reduced, the life of the iron tip for the same temperature series of iron head, fine iron head, life expectancy than a rough iron head life is shorter. Because the iron head is working, it will inevitably cause wear and tear on the surface of the nozzle life. Therefore, the fine iron head is more prone to wear, so to reduce the life of the soldering iron.

Maintenance of iron head

The use of new electric iron, electric iron can not bring the new use, need to be plated with a layer of solder in the iron head method is: according to the power supply when the temperature gradually increased, the rosin coated iron head; rosin smoke, to melt the solder iron head, with a the solder layer so as to strengthen the tip life.

CH001941
€3.61

900M-T-I KINGBOX 936 lead-free soldering iron head thermostatic head

wishlist
Compare
Quickview

ON NCP3218MNR2G

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH001001
€3.45

ON NCP3218MNR2G

wishlist
Compare
Quickview

KMFNX0012MB214 Chip Nand Flash 8Gb FBGA221

KMFNX0012M-B214 Chip Nand Flash 8Gb (FBGA221)

Part Number KMFNX0012M-B214 Manufacturer Samsung

BGA Alloy No Pb/Lead Free Date Code 16+

Package/Case 1 PCS Description Brand new

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH001014
€28.59

KMFNX0012M-B214 Chip Nand Flash 8Gb (FBGA221)

wishlist
Compare
Quickview

JMICRON JMC251LGAZ0A

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH001020
€3.45

JMICRON JMC251-LGAZ0A

wishlist
Compare
Quickview

BROADCOM BCM57785

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH001021
€3.45

BROADCOM BCM57785

INTEL JG82845GV SL8DA

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000992
€14.30

INTEL JG82845GV SL8DA

wishlist
Compare

HC06 Wireless Bluetooth Arduino PI JYMCU Serial RF 5V Transeiver Module

Features:

100% brand new and high quality HC-06 bluetooth RF transceiver module

With VCC, GND, TXD, RXD foot for the bluetooth.

With LED indicator light.

3.3V LDO baseboard.

Input voltage 3.3-6V, the input voltage more than 7V is prohibited.

Unpaired current is about 30mA, matched current is about 10mA.

Interface level 3.3 V, can be connected directly to a variety of single chip microcomputer (51, AVR, PIC, ARM, MSP430, etc.)

5V microcontroller can also be connected directly, without MAX232 nor through MAX232.

Open to effective distance of 10 meters, over 10 meters is also possible, but not of this the quality of the connection of the distance do to ensure

The pair later when full-duplex serial use, do not need to know anything about the Bluetooth protocol, but only supports 8 data bits, 1 stop bit, no parity communication format, which is the most commonly used communication format does not support other formats.

Support to establish a Bluetooth connection through AT commands set the baud rate, passkey, set parameters are saved after.

Specifications:

Size: Approx. 43mm x 15mm

Input voltage: 3.6-6V

Working current: matching for 30 mA, matching the communication for 10 mA

Output Power Class: Class 2

Package Includes:

1 piece HC-06 bluetooth RF transceiver module

CH001925
€7.46

HC-06 Wireless Bluetooth Arduino PI JY-MCU Serial RF 5V Transeiver Module

wishlist
Compare

Winbond W25Q16BVSIG

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000999
€3.45

Winbond W25Q16BVSIG

wishlist
Compare

SAMSUNG K4J10324QDHC14

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH001000
€3.45

SAMSUNG K4J10324QD-HC14

wishlist
Compare

900MTI KINGBOX 936 leadfree soldering iron head thermostatic head

Taiwan lead-free high quality 936 iron head

Characteristic:

1. special cast iron process, corrosion resistance, oxidation resistance, especially for long life.

2. strong immersion prolonged, easy to melt, Shangxi, solder joint round.

3. ? uniform inductance, stable quality, lead-free material.

4. lead-free environmental production, has passed the SGS test.

All soldering stations used in the 900M-T series

Such as table machine, 936 series welding platform

900M series lead-free soldering iron

? made of pure copper components, high thermal conductivity, fast heat transfer

? special iron surface plating, high temperature resistance, corrosion resistance

Special process, suitable for lead-free solder welding

? strong tin capacity, no oxidation, no tin, no tin, tin climbing phenomenon

? the outer layer is bright and delicate and very strong in rust resistance

? this product has passed the SGS environmental protection test

Life of soldering iron head

The life of the iron head is determined by the number of welds, and the length of life guaranteed depends on the coating thickness of the head. The thicker the coating, the longer the life of the iron head, but the heat transfer efficiency will be greatly reduced, the life of the iron tip for the same temperature series of iron head, fine iron head, life expectancy than a rough iron head life is shorter. Because the iron head is working, it will inevitably cause wear and tear on the surface of the nozzle life. Therefore, the fine iron head is more prone to wear, so to reduce the life of the soldering iron.

Maintenance of iron head

The use of new electric iron, electric iron can not bring the new use, need to be plated with a layer of solder in the iron head method is: according to the power supply when the temperature gradually increased, the rosin coated iron head; rosin smoke, to melt the solder iron head, with a the solder layer so as to strengthen the tip life.

CH001941
€3.61

900M-T-I KINGBOX 936 lead-free soldering iron head thermostatic head

wishlist
Compare

ON NCP3218MNR2G

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH001001
€3.45

ON NCP3218MNR2G

wishlist
Compare

KMFNX0012MB214 Chip Nand Flash 8Gb FBGA221

KMFNX0012M-B214 Chip Nand Flash 8Gb (FBGA221)

Part Number KMFNX0012M-B214 Manufacturer Samsung

BGA Alloy No Pb/Lead Free Date Code 16+

Package/Case 1 PCS Description Brand new

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH001014
€28.59

KMFNX0012M-B214 Chip Nand Flash 8Gb (FBGA221)

wishlist
Compare

JMICRON JMC251LGAZ0A

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH001020
€3.45

JMICRON JMC251-LGAZ0A

wishlist
Compare

BROADCOM BCM57785

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH001021
€3.45

BROADCOM BCM57785

wishlist
Compare
Back to top