LVDS Cable for screen Acer 3750 p/n: 1414-05H4000 1422-00Y5000

USB2.0 high speed card reader MS.CF.TF.SD 6in1 card reader

Item Description

Specification:

-CH340G Replace FT232RL.

-Operating Voltage(logic level): 5V.

-8 analog inputs ports:A0 ~ A7.

-14 Digital input / output ports:TX,RX,D2 ~ D13.

-6 PWM ports:D3, D5, D6, D9, D10, D11.

-1 pairs of TTL level serial transceiver ports RX / TX.

-Support USB download and Power.

-Support for external 5V ~ 12V DC power supply, and 9V battery.

-Support ISP download.

2014 Driver version 3.4.2014.8 for Windows 8+: arduined.eu/ch340-windows-8-driver-download/

The new driver CH34x_Install.zip for Mac OS-X El Capitan: kig.re/downloads/CH34x_Install.zip Older Driver for MAC: kig.re/downloads/CH341SER_MAC.ZIP

Arduino IDE download link : arduino.cc/en/Main/Software

You can learn more about how to use the nano at below link:

https://kiguino.moos.io/2014/12/31/how-to-use-arduino-nano-mini-pro-with-CH340G-on-mac-osx-yosemite.html

Package included

1* Nano V3.0 ATmega328P 5V 16MHz CH340G Micro-controller Development Board (Welded)

Main Features

CH340G Replace FT232RL, works well with Arduino IDE

Micro-controller chip: Atmega328P, support ISP download

8 Analog inputs ports and 14 digital input/output ports

Mini USB for download and power supply

Support for external 5V~12V DC power supply and 9V battery

Teensy 3.2 Development Board

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.2 comes pre-flashed with a bootloader so you can program it using the onboard USB connection: No external programmer needed! You can program for the Teensy in your favourite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!

The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32-bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also 4 separate interval timers plus a delay timer! Oh yeah, and all pins have interrupt capability. Also, it can provide system voltage of 3.3V to other devices at up to 100mA.

All of this functionality is jammed into a 1.4 x 0.7 inch board with all headers on a 0.1" grid so you can slap in on a breadboard and get to work! The Teensy 3.2 adds a more powerful 3.3-volt regulator, with the ability to directly power an ESP8266 Wifi, WIZ820io Ethernet, and other 3.3V add-on boards that require a little more power. Additionally, if it is used within the Teensy 3.1 limits of operation, the Teensy 3.2 and 3.1 are interchangeable!

Note: This does not come with a USB cable, please check below for an appropriate one.

Dimensions: 1.4 x 0.7" (~35 x 18 mm)

Features:

32 bit ARM Cortex-M4 72 MHz CPU (M4 = DSP extensions)

256K Flash Memory, 64K RAM, 2K EEPROM

21 High-Resolution Analog Inputs (13 bits usable, 16-bit hardware)

34 Digital I/O Pins (5V tolerance on Digital Inputs)

12 PWM outputs

7 Timers for intervals/delays, separate from PWM

USB with dedicated DMA memory transfers

3 UARTs (serial ports)

SPI, I2C, I2S, CAN Bus, IR modulator

I2S (for high-quality audio interface)

Real Time Clock (with user-added 32.768 crystal and battery)

16 DMA channels (separate from USB)

Touch Sensor Inputs

Buy DuPont cable jumper: * Male-Male Male-Female Female-Female

Brand new and high quality.

3lot 40P Color Jumper Cable Dupont Line, it contains 120pcs jumper cables in total.

Length : 20cm

1p-1p pin header

A row of 40 root

Compatible with 2.54mm spacing pin headers

Package Included:

40pcs DuPont line of male-to-female

40pcs DuPont line of male-to-male

40pcs DuPont line of female-to-female

LVDS Cable for screen Packard Bell EasyNote TJ62 TJ65 TJ72 p/n: 50.4BU01.001 50.4BU01.002 50.4BU

LVDS Cable for screen Lenovo Y470 P/N: DC020017610

Handheld stabilizer L08 mobile phone self timer stick Bluetooth single axis anti shake shooting tripod bracket

Product Parameters

Product Name: Heat Shrink Tube Set

Product material: Irradiation cross-linked modified polyolefin resin

Tensile strength: >10.4mpv

Product color: yellow, blue, black, green, red

Uses: Widely used in wire connection, insulation protection of solder joints, wire

end treatment resistance, capacitor insulation protection, wire mark and

end metal pipe, rod rust and corrosion protection, antenna protection

LVDS Cable for screen Lenovo G50-45 G50-70 G50-30 Z50-70 Z50-45 Ver.1 p/n: 90205236 DC02001MC00

100% Brand new and high quality

The copper has high purity coefficient of thermal conductivity as high as 407 w/ (m?K)

With this copper pad to greatly lower GPU temperatures, can be used for graphics, northbridge, CPU chips.

It can be applied to HP, Dell, Acer, Thinkpad and all laptop and computer heatsink solution!

Material: Copper

Color: As the picture

Size: Approx. 1.5T x 15 x 15(T*L*W)

How to use: First daub a little thermal silicone grease (FYI: Do not use the low-end silicone grease), then put the right size copper shims, then daub a little thermal silicone grease again, last install the heatsink and tighten the screws

Dinghua Model:DH-A1L-C BGA rework station

Buy BGA repaired Nozzle: * BGA repaired Nozzle Operation manual

Specification:

Total Power 4900W

Top heater 800W

Bottom heater Second heater 1200W,IR preheating

2700w, digital thermostat soldering iron

80W

Power AC220V10% 50/60Hz

Dimensions L650W700H650 mm

Positioning V-groove, PCB support can be adjusted in any direction with

external universal fixture

Temperature control K Sensor, Closed loop

Temp accuracy 1?

PCB size Max 500450 mm Min 2222 mm

BGA chip 22-8080mm

Minimum chip spacing 0.15mm

External Temperature Sensor 1(optional)

Net weight 55kg

Feature:

1.Embedded Industrial PC, high definition touch screen interface, PLC control, and

instant profile analysis function. Real-time settings and actual temperature profile

display can be used to analyzed and correct parameters if necessary.

2.It uses precise K-type close circuit control and automatic temperature adjustment

system, with PLC and temperature module to enable precision temperature control of

1 deg C. External temperature sensor enables temperature monitoring and accurate

analysis of real time temperature profile.

3.V-groove PCB support for rapid, convenience and accurate positioning that fits for

all kinds of PCB board.

4.Flexible and convenient removable fixture on the PCB board which protects and

prevent damage to PCB. It can also adapt to rework various BGA packages.

5.Various sizes of BGA nozzles, which can be adjusted 360 degree for easy

installation and replacement;

6.Three temperature areas can independently heat and are multiple controllable and

adjustable to ensure best integration of different temperature areas. Heating

temperature, time, angle, cooling and vacuuming can all be set on the interface.

7.There are 6-8 levels of variable and constant temperature controls. Massive storage

of temperature curves which are Instant accessible according to different BGA. Curve

analysis, setting and adjustment are all accessible via touch screen. Three heating

areas adopts independent PID calculation to control heating process to enable more

accurate and precise temperature control.

8.It uses high powered blower to enable fast cooling of PCB board and prevent it from

deformation. There are also internal vacuum pump and external vacuum pen to assist

with fetching the BGA chip.

9.Laser positioning, fast and effectively fix PCB

10.USB output interface.

11.Equipped with constant temperature digital display soldering iron

12.Including Voice "early warning" function. 5-10 seconds before the completion of

uninstalling or welding, voice reminder / warning to get the workers prepared.

Cooling system will start after vertical wind stopped heating. When the temperature

drops to room temperature, the cooling process will stop, so that the machine will not

age after

heated up.

13.HD Display screen+camera + support. With the equipment, we can see the

melting ball of outermost row very clear.

14.CE certification, with emergency switch and automatic power-off protection

device when emergency happens.