8# SATA Hard Disk Power Line Transfer Line 4 pin IDE to SATA serial Connection Line

Description:

100% brand new and high quality

Repair rubber dock bumpers

Seal plastic containers

Repair stripped threads in wood

Specation:

Material: plastic shell + glue

Color: as pic shows

Length: approx. 6.69inch/17cm

Width: approx. 2.36inch/6cm

Model: B-7000

Net weight: 3.7fl.oz (110ml)

Solid content: 30% - 35%

After curing Hardness: 65-80A

Surface drying time: 3 minutes

Full cure time: 24-48 hours

Storage: stored at 10 degrees to 28 degrees

Method of use:

Please read carefully before using the product instruction

Large area before use, please do small area test

Please make sure that the sticking surface cleaning and drying

The best use of temperature should be between 18-32 degrees

The product after opening the cover please timely cover titch removal for the adhesive residue on the cover

Wait for 1-2 minutes , two adherend aligment bonding a little pressure

It is straight hours can be after 48 hours to achieve the best bonding strength

The product does not use the bottle cap to prevent glue after contacting air curing

Package included:

1x Strength Glue

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

Honton HT-2024T Heating table constant temperature welding stage

HT 2024T item is used to melt the balls on the chip with ease. After putting the balls on the chip simply place the chip carefully on the plate and it will melt them into place. Has many other uses. Can be used for cleaning chips.

Voltage: 220V/110V

Heating Power: 800W

Temperature Range:25~350C

Temperature Fluctuation: 1

Heating Plate Size: 200x240x15mm

Weight:10KG

Battery for Asus X450 A450J A450JF A450E F450E (15V 2950mAh) p/n: A41-X550E

Battery Type Li-ion p/n A41-X550E

Voltage 15V Color Black

Capacity 2950mAh Description Original and New

Buy Tweezers Set: * VETUS ESD-10 ESD-11 ESD-12 ESD-13 ESD-14 ESD-15 ESD-16

FPC Socket Connector For ASUS X555 A555 K555 VM590 Y583 R556 X554 F555 HDD Board 50pin

Package include:

1x FPC Socket Connector (HDD BOARD SIDE) 50pin

Compatible models:

ASUS X555LD X555DG X555LP X555UJ X555LF X555LN X555LB

ASUS X554LJ X554LD

ASUS A555LB

ASUS R556L R556LD

ASUS VM590L

ASUS Y583L Y583LD

ASUS F555LD

ASUS K555 K555L K555Y

Silicone Heat Mat Set: * Silicone Heat Mat Repair Insulation Kit Mobile Computer Tablets Phones Fix Pad

Cooling Fan for Lenovo Thinkpad T40 T41 T42 T40P T41P T42P

Part Number Lenovo Thinkpad T40 Manufacturer China

Voltage 5V Type CPU Fan

Power Connection 3-Pin Brand Unbranded/Generic

Taiwan lead-free high quality 936 iron head

Characteristic:

1. special cast iron process, corrosion resistance, oxidation resistance, especially for long life.

2. strong immersion prolonged, easy to melt, Shangxi, solder joint round.

3. ? uniform inductance, stable quality, lead-free material.

4. lead-free environmental production, has passed the SGS test.

All soldering stations used in the 900M-T series

Such as table machine, 936 series welding platform

900M series lead-free soldering iron

? made of pure copper components, high thermal conductivity, fast heat transfer

? special iron surface plating, high temperature resistance, corrosion resistance

Special process, suitable for lead-free solder welding

? strong tin capacity, no oxidation, no tin, no tin, tin climbing phenomenon

? the outer layer is bright and delicate and very strong in rust resistance

? this product has passed the SGS environmental protection test

Life of soldering iron head

The life of the iron head is determined by the number of welds, and the length of life guaranteed depends on the coating thickness of the head. The thicker the coating, the longer the life of the iron head, but the heat transfer efficiency will be greatly reduced, the life of the iron tip for the same temperature series of iron head, fine iron head, life expectancy than a rough iron head life is shorter. Because the iron head is working, it will inevitably cause wear and tear on the surface of the nozzle life. Therefore, the fine iron head is more prone to wear, so to reduce the life of the soldering iron.

Maintenance of iron head

The use of new electric iron, electric iron can not bring the new use, need to be plated with a layer of solder in the iron head method is: according to the power supply when the temperature gradually increased, the rosin coated iron head; rosin smoke, to melt the solder iron head, with a the solder layer so as to strengthen the tip life.

Taiwan lead-free high quality 936 iron head

Characteristic:

1. special cast iron process, corrosion resistance, oxidation resistance, especially for long life.

2. strong immersion prolonged, easy to melt, Shangxi, solder joint round.

3. ? uniform inductance, stable quality, lead-free material.

4. lead-free environmental production, has passed the SGS test.

All soldering stations used in the 900M-T series

Such as table machine, 936 series welding platform

900M series lead-free soldering iron

? made of pure copper components, high thermal conductivity, fast heat transfer

? special iron surface plating, high temperature resistance, corrosion resistance

Special process, suitable for lead-free solder welding

? strong tin capacity, no oxidation, no tin, no tin, tin climbing phenomenon

? the outer layer is bright and delicate and very strong in rust resistance

? this product has passed the SGS environmental protection test

Life of soldering iron head

The life of the iron head is determined by the number of welds, and the length of life guaranteed depends on the coating thickness of the head. The thicker the coating, the longer the life of the iron head, but the heat transfer efficiency will be greatly reduced, the life of the iron tip for the same temperature series of iron head, fine iron head, life expectancy than a rough iron head life is shorter. Because the iron head is working, it will inevitably cause wear and tear on the surface of the nozzle life. Therefore, the fine iron head is more prone to wear, so to reduce the life of the soldering iron.

Maintenance of iron head

The use of new electric iron, electric iron can not bring the new use, need to be plated with a layer of solder in the iron head method is: according to the power supply when the temperature gradually increased, the rosin coated iron head; rosin smoke, to melt the solder iron head, with a the solder layer so as to strengthen the tip life.

Input voltage range: DC 3.2V to 46V is recommended for use in 40V! The input voltage must be more than 1.5V higher than the voltage to be output. Can't boost)

Output voltage range: DC 1.25V to 35V voltage continuously adjustable, high efficiency (maximum 92%) maximum output current is 3A.

Measured 12V input, 5V output current 1A load adjustment rate is less than 1%

Note: This is a buck module, and the input voltage must be higher than the output voltage.

Output below 2A can be long time without adding fins output current greater than 2.5A (or output power greater than 10W) long time work, Please add fins.

Model / name: LM2596S DC-DC buck module

input voltage: 3.2V~46V (recommended for use in 40V)

output voltage: 1.25V~35V

Output current: 3A (max)

conversion efficiency: 92% (highest)

Output ripple: <30mV

switching frequency: 65KHz

working temperature: -45 C ~ +85 C

Size: 43mm * 21mm * 14mm (length * width * height)