TL631-Pro Diagnosis Card + MINI PCIE + A-DEBUG Desktop PCI Mainboard PCI-e Notebook Debugging Card Apple PC LPC Debug

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

Description

Condition: new and original

Note : Due to post air mail can not send button battery (CR2032 ,3.2V) , so we will not send button battery , please you buy from your hometown. thank you so much !

Package includes:

1 * Tester (No English Manual)

 In package include: 

1 pcs Programmer SVOD Ver. 4
1 pcs USB Connection Cable
1 pcs Extended Board Of Ports For Keyboard Module
Flex Cables: 34pin, 32pin, 30pin, 26pin (All Cables What You See In Picture).
1 set – Soic 150mm + Soic 200mm
1set – Wson Qfn Sockets: 6x5 + 6x8
1 pcs -  Zip Clip
1 pcs – LCD Cable Tester Board
1 pcs  - EFI SPI ROM Ribbon Cable ( Hirose 30 + Molex 30 + Molex 12 )
1 set - Debug ZIF PCB ITE ENE NUVOTON

1 pcs - BGA Socket 153/169 + Frame 11,5x13

1 pcs - TSOP 48/DIP 48 Pitch 0.5

Please to select shipping option in checkout:

          Economy: 10-35 working days (Europe and Worldwide)

          Expedited : 5-10 working days  (Europe and Worldwide)

SVOD V4 programmer  is a universal programmer for various microcircuits.

As you know you can program different kinds of chips such as:  SPI, I2C, ONE WIRE, NAND, NAND SPI, NOR, EMMC BGA, JTAG, UART, ENE, MEC, ITE, NUVOTON, parallel synchronous and asynchronous protocols. Automatic detection of "bad contact" when connecting chips.

Protocol: JEDEC ID (spi25 flash, nand have 5 byte ID, spi NAND have 512 byte ID, nor48,40 have 3 byte id, emmc have 512 byte id, new spi25 have sfdp with 128 byte info).

 Specifications:

*SVOD 4 port of connection to the computer: usb 2.0- 3.0 high speed,

*SVOD 4 CPU: Processor ARM7, 480MHz

*SVOD 4 Voltage: 12V, 5V, 3.3V, 2.5V, 1.8V, 1.5V, 1.25V, 1.2V, 0.8V

*SVOD 4 GPIO PIN: 48+16 

 -------------------------------------------------------------------------

 SPI ROM EFI cable - Comptible Mbook's list until 2017 year if you use SVOD programmers,

 A1534 emc 2746 820-00045, A1534 emc 2991 820-00244, A1534 emc 3099 820-00687, A1370 emc 2393 820-2796, A1370 EMCXXXX 820-2955, A1370 EMCXXXX 820-2955, A1370 820-2855-A, A1465 emc 2558 820-3208, A1465 emc 2631 820-3435, A1465 emc 2924 820-00164, A1304 EMCXXXX 820-2375, A1304 EMCXXXX 820-2375, A1369 emc 2469 820-3023, A1466 emc 259 820-32509, A1466 emc 2632 820-3437, A1466 emc 2925 820-00165, A1466 emc 3178 820-00165, A1425 emc 2512 820-3462, A1502 emc 2678 820-3536, A1502 emc 2678 820-3476, A1502 emc 2875 820-3476, A1502 emc 2835 820-4924, A1398 emc 2512 820-3332, A1398 emc 2673 820-3332, A1398 emc 2746 820-3662, A1398 emc 2876 820-3662, A1398 emc 2745 820-3787, A1398 emc 2881 820-3787, A1398 emc 2909 820-00138, A1398 emc 2910 820-00163, A1398 emc 2910 820-00426, A1708 EMCXXXX 820-00361, A1708 emc 2978 820-00875, A1708 emc 3164 820-00840, A1706 emc 3071 820-00239, A1706 emc 3163 820-00923, A1707 emc 3072 820-00281, A1707 emc 3162 820-00928, A1283 emc 2264 820-2366,A1283 emc 2336 820-XXXX, A1347 emc 2364 820-2577, A1347 emc 2442 820-2993, A1347 emc 2442 820-3059, A1347 emc 2442 820-3017, A1347 emc 2570 820-3227, A1347 emc XXXX 820-3228, A1347 emc 2840 820-5509

  -------------------------------------------------------------------------

Supported:

KB9010,KB9012, KB9016, KB9018, KB9022, KB9028qc

NPCE288N/NPCE388N

ITE IT5571VG PROGRAMMABLE

ITE IT8380E PROGRAMMABLE

ITE IT8380VG PROGRAMMABLE

ITE IT8386 PROGRAMMABLE

ITE IT8522 PROGRAMMABLE

ITE IT8580 PROGRAMMABLE

ITE IT8585E PROGRAMMABLE

ITE IT8586E PROGRAMMABLE

ITE IT8586VG PROGRAMMABLE

ITE IT8587E PROGRAMMABLE

ITE IT8589 PROGRAMMABLE

ITE IT8886H PROGRAMMABLE

ITE IT8886HE PROGRAMMABLE

ITE IT8985E PROGRAMMABLE

ITE IT8987E PROGRAMMABLE

ITE IT8995E PROGRAMMABLE

NUVOTON NPCE288NA0DX PROGRAMMABLE

NUVOTON NPCE388NA0DX PROGRAMMABLE

LENOVO IT8227VGPROGRAMMABLE

MEC1404-NU 128-VTQFP PROGRAMMABLE 128 KB

SMSC MEC1404-SZ 144-WFBGA PROGRAMMABLE 128 KB

SMSC MEC1406-NU 128-VTQFP PROGRAMMABLE 160 KB

SMSC MEC1406-SZ 144-WFBGA PROGRAMMABLE 160 KB

SMSC MEC1408-NU 128-VTQFP PROGRAMMABLE 192 KB

SMSC MEC1408-SZ 144-WFBGA PROGRAMMABLE 192 KB

SMSC MEC1414-NU 128-VTQFP PROGRAMMABLE 128 KB

SMSC MEC1414-SZ 144-WFBGA PROGRAMMABLE 128 KB

SMSC MEC1416-NU 128-VTQFP PROGRAMMABLE 160 KB

SMSC MEC1416-SZ 144-WFBGA PROGRAMMABLE 160 KB

SMSC MEC1418-NU 128-VTQFP PROGRAMMABLE 192 KB

SMSC MEC1418-SZ 144-WFBGA PROGRAMMABLE 192 KB

SMSC MEC1609 PROGRAMMABLE

SMSC MEC1619 PROGRAMMABLE

SMSC MEC1632 PROGRAMMABLE

SMSC MEC1633 PROGRAMMABLE

SMSC MEC1641 PROGRAMMABLE

SMSC MEC1650 PROGRAMMABLE

SMSC MEC1651 PROGRAMMABLE

SMSC MEC1653 PROGRAMMABLE

SMSC MEC5035 PROGRAMMABLE

SMSC MEC5045 PROGRAMMABLE

SMSC MEC5055 PROGRAMMABLE

SMSC MEC5075 PROGRAMMABLE

SMSC MEC5085 PROGRAMMABLE

SMSC MEC1609 PROGRAMMABLE

 SMSC MEC1609I PROGRAMMABLE

SMSC MEC1633L PROGRAMMABLE

 EPF011/021/035/036/037

 SMSC MEC5085 NON-PROGRAMMABLE

 You can buy a brand new programmer / Tested 100% .

The mode of displaying POST codes of the laptop motherboard is implemented. Choose the software in the online base of your motherboard, download, select it in the choice of motherboard, connect the motherboard with a loop to the keyboard connector, and read the post codes by running the software in read mode of POST codes.

MANY FLASHING FILES IN DATABASE FOR FREE WHEN YOU WILL CONNECT PROGRAMMER

if you are not from Europe, please inquire about customs tax, VAT of your country.

We send products in Russia via registered POST (12-20 days).

Colombia, Paraguay, Brazil, Mexico - before placing an order, please to ask your customs about tax and duties.

Colombia, Paraguay, Brazil, Mexico - antes de realizar un pedido, consulte con la aduana sobre la cantidad de impuestos y aranceles.

Si no eres de Europa, consulta sobre el impuesto de aduanas, el IVA de tu país.

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

Mini PCI/Mini PCI-E/LPC Combo-Debug-Card VIP version Notebook Combo-Debug-Card (VIP Version) User Guide

This notebook Combo-Debug Card Uses 4-layers PCB design to provide a very stable signal quality. Also, it uses Tantalum capacitance to provide good power supply. So this VIP version Debug card is more suitable to be used in poor environment. This VIP version is the upgraded version of the Combo-Debug-Card, and it supports three bus interfaces: MINI PCI, MINI PCI-E and LPC. This product is easy to use, and is designed with good stability. It is your ideal tool for notebook repair.

combo ?debug- card structure and usage

1. Mini-PCI interface:

This is used to connect this Combo Debug Card to notebooks Mini-PCI slot.

2. Mini-PCI-E interface:

This is used to connect this Combo Debug Card to notebooks Mini-PCI-e slot

3. LPC interface:

This is used to connect this Combo Debug Card to notebooks LPC connector.

4. ASIC

5. Two 7-segment LEDS:

This is used to display the Error-code

6. Test port:

This port is reserved, and end-user should not use this port.

7. indicator : this is for showing the status of CLK and RST signal.

The Mini-PCI interface in the Combo-Debug-Card

Mini PCI is a general interface, which is used in notebook. It includes 124 pins. This combo-debug-card doesnt fully use those pins, and only 101 pins are used. When installing this combo-debug-card to your notebook main-board , you will find the combo-debug-card is shorter than the notebook Mini-PCI slot. This is correct, and it servers better for you to plug or unplug this combo-debug-card.

The Mini-PCI-e interface in the Combo-Debug-Card

Mini-PCI is used as a trend in the new notebooks. Comparing to Mini-PCI, Mini-PCI-e occupies less space. This Combo-Debug-Card doesnt use all of the Mini-PCI-e bus pins. And only the below pins are used: PIN-8, PIN-10, PIN-12, PIN-14, PIN-16, PIN-17, and PIN-19. in the Mini-PCI-e spec, those pins are reserved, and it is not standard, so some of Notebook manufacturers define it as a LPC debug-port. And more and more notebook manufacturers are using this standard, such as IBM, Toshiba, HP, ASUS, TCL and etc??this Combo-Debug-Card can only work in the notebooks, which are with the LPC debug-port definition. For the notebooks, which dont support this LPC debug-port definition, this Combo-debug-card PCI-E interface will not work.

Note: Please be aware that Mini-PCI-e is supported with limitation, and it can works in most of notebooks, but not all.

The LPC interface in the Combo-Debug-Card

For the user, whose notebooks dont support the Mini-PCI interface and the Mini-PCI-e interface, you can use the third port: LPC interface. LPC interface exists in all notebook main-boards. In the Combo-Debug-Card, from left to right, the LPC definition is:

PIN1-LFRAME?, PIN2-LAD3, PIN3-LAD2, PIN4-LAD1, PIN5-LAD0, PIN6-GND, PIN7-LRESET?, PIN8- LCLK, PIN9-3.3V

Usually, the notebook boards havent LPC connectors or slots. And the users will need to connect this LPC port to the notebook by using wires. Below is some description for how to connect the Combo-Debug-Card to your notebook through this LPC interface.

If your notebooks use LPC VBIOS, you can connect the Combo-Debug-Card to your notebooks VBIOS bus.

LPC VBIOS Pin definition:

PIN2-RST? PIN13-LAD0 PIN14-LAD1 PIN15-LAD2 PIN16-GND PIN17-LAD3 PIN23-LFRAME? PIN25-VCC PIN31-CLK

You can connect this Combo-Debug-Card to any LPC bus. Some LPC interface chips are listed as below. You can connect the Combo-Debug-Card to the corresponding pins. For more information, please refer those chips datasheets.

Note: this Combo-Debug-Card uses 3.3V as power supply, and you can use any 3V3 and GND signals in your notebook main-board. Please be aware that connecting the Combo-Debug-Card to a non-3.3V power may damage this Combo-Debug-Card.

For IBM X 60 notebooks, the LPC interfaces are located in the U39 slot of the main-board. The Pin definitions are as below: A2->LRESET? A3->LFRAME? A5->LCLK A9->LAD3 A10->LAD2 A11->LAD1 A12->LAD0

For IBM T6 R6 notebooks, the LPC interfaces are located in the J26 slot of the main-board. The Pin definitions are as below: A1->LCLK, A3->LFRAME? B2->LRESET? B7->LAD3 A7->LAD2 B6->LAD1 A6->LAD0

The LED-Display in the Combo-Debug-Card

The Display includes Error-Code display, Bus-Type display, and CLK,RST signal, status display .

1, Error-Code display: It is composed with two 7-segment LED s.

2, Bus-Type display: The two Dots of the LED s are used to indicate the notebook bus type. The left side Dot is for Mini-PCI bus, and the right side Dot is for Mini-PCI-e and LPC bus. When the notebook works in Mini-PCI bus, the right side Dot will be lighted.

3, CLK, RST signal status display: when you hold on the notebooks RESET button, the RST indicator will be lighted, and the CLK indicator will be off. When you release the notebook RESET button, the RST indicator will be off, and the CLK indicator will be twinkled.

Part of Error-Code explanation

When the notebooks are running, this Combo-Debug-Card will show the corresponding debug code. If there is a problem in the notebook, you can judge the problem by the debug code. Below is the explanation for some main error codes.

AWARD BIOS:The explanation when the Combo-Debug-Card shows the below debug codes.

Code Explanation

C0 Close cache

01 Processor test

07 CMOS test

C1 Memory size test

0A Set the interrupt table

0C Initiate the keyboard

0D Initiate the Graphic card

1A Show CPU frequency

3C CMOS setting

42 Initiate hardware

52 Test the extended ROM

FF Boot

AMI BIOS: The explanation when the Combo-Debug-Card shows the below debug codes.

Code Explanation

00 Error in self test

01 Error in processor test

0D,0F Error in CMOS test

1A~22 Error in Memory test

3A Error in graphic card

FF Pass the self test

Q/A

Question: RST indicator is off, but CLK indicator is NOT twinkled.

Answer: this symptom shows there is no CLK signal for debug card so that the CLK indicator isnt twinkled .Usually, it may mean the motherboard can NOT support this Mini-PCI-e interface. Please use Mini-PCI or LPC interface to test it.

Question: RST indicator is off ,and CLK indicator is twinkled. But it shows 00

Answer: In this case, please check the Bus-Type display to check if the Bus-Type display is corresponding to the bus type.

Featuring LPC and Compal NGFF interfaces, this multifaceted device offers compatibility with a wide range of systems, ensuring versatility across various platforms. Whether troubleshooting desktops, laptops, or embedded systems, our POST card delivers accurate diagnostic data to streamline fault identification and resolution.

Designed with advanced circuitry and robust construction, our POST card guarantees reliability and durability in demanding environments. Its compact form factor and user-friendly interface make it an indispensable tool for technicians, enabling swift and efficient troubleshooting without the need for complex setup procedures.

Stay ahead of technical issues and minimize downtime with our Universal Multi-function POST Card LPC + Compal NGFF. From system builders to IT professionals, this essential diagnostic tool is the ultimate solution for ensuring optimal performance and reliability in today's fast-paced computing landscape.

T48 (TL866II 3rd Generation) Programmer Support 31000+ ICS for EPROM / MCU / SPI / Nor / NAND Flash / EMMC.

• Programming speed much faster: (30MHZ); for SPI NOR FLASH 25Q128, 30s+5.4s(P+V) (30MHZ); for P_NAND 29F1G08AB, 27s+17s(P+V); for P_NOR FLASH EN29LV320 TSOP48, 24s+1.9s(P+V)......
• Support EMMC/EMCP; P-NAND; SPI NAND FLASH; GAL PLD; MCU: 51/PIC/AVR; 27/28/29/39/49/50; 24/25/45/93/95; 74 Series Logic IC Visual Test
• Production of high-density SMD technology, a unified user interface, easy to use, fully functional, reliable program running of application software, ultra-small (size is almost the same as TL866II), code-runs much faster, support multilanguage menu (English, Chinese, Russian, Polish, German, Spanish, Portuguese, Turkish, Czech, Italian), it can automatically identify the operating system to install and run under Windows XP,2003,2008,Vista Win7 WIN8 WIN10 WIN11.
• T48 hardware Parameters: 32-bit MCU with 120MHZ, 4-layer PCB Design, USB2.0 HS 480MHZ; Volume: 10X6.5X2.8 cm (almost the same as TL866II); 16 channel ISP, total 56-channel dedicated IO, 56-channel high-speed high-voltage isolation; VCC voltage 1.8-6.5V 64 levels adjustable, VPP voltage 9V-25V 64 levels adjustable; Power consumption: 5V <500MA.
• With 40-pin industrial high-quality ZIF Socket (Pluggable/replaceable), newest model T48 (TL866-3G) programmer is the improvement of TL866II Plus programmer. Based on 32-bit MCU with 120MHZ and 4-layer PCB design, this professional T48 programmer support high-capacity NAND EMMC up to 256GB and programming speed is much higher. Suppport high-voltage chips, such as 27Cxxx series, VCC Maximum up to 25V, that is what TL866II cannot achieve.

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

In package included:

1 pcs x GZUT EZP XPRO Programmer

1 pcs x EFI Riboon Cable

2 pcs x small PCB

1 pcs x USB cable

You can select shipping option in checkout:  Economy or Expedited

Economy: 10-35 working days (Europe and Worldwide)

Expedited : 5-10 working days  (Europe and Worldwide)

 With this Professional SET you can make adjustments for Bios manually and fix EFI.

This flashing set (GZUT v2 PRO + EFI RIBBON CABLE) used for Mcbook, McBook Air and new McBook Pro models from 2010 to 2017 

It has three connectors for the years 2010 – 2011, 2012 – 2014 and 2015 – 2017

You can read bios chip without desoldering process. 

Programmer EZP GZUT v2 PRO set supported  :

MBA11 2015 A1465 820-00164
MBA11 2013 A1465 820-3435
MBA13 2011 A1369 820-3023
MBA11 2011 A1370 820-3024
MBA 13 2013 A1466 820-3437
MBA 13 2012 A1466 820-3209
MBA13 2015 A1466 820-00165
MBA13 2017 A1466 820-00165
MBP13 2016 A1708 820-00875
MBP13 2016 A1706 820-00239
MBP15 2017 A1707 820-00928
MBP15 2016 A1707 820-00281
MBP13 2017 A1706 820-00923
MBP13 2017 A1708 820-00840
MBP13 2015 A1502 820-4924
MBP13 2014 A1502 820-3476
MBP13 2014 A1502 820-3536 
MBP13 2013 A1502 820-3476
MBP13 2014 A1502 820-3476
MBP15 2012 A1398 820-3332
MBP15 2013 A1398 820-3332
MBP15 2013 A1398 820-3662
MBP15 2013 A1398 820-3787
MBP15 2014 A1398 820-3662
MBP15 2015 A1398 820-00138 
MBP15 2015 A1398 820-00163
MBP12 2015 A1534 820-00045
MBP12 2016 A1534 820-00244
MacMini 2011 A1347 820-2993

Apple Macbook Pro A1286 M98_820-2330-A_G96-632-C1_SST25VF032B - EFI ribbon cable not compatible, support GOLDEN pin silicone cable. 

You can used GOLD PIN SILICONE CABLE and read this bios chip (visit our shop and check)

Apple A1278 K6 MCP89MZ-A2 SST25VF032B -  EFI ribbon cable not compatible (support only GOLDEN PIN silicone cable)

Apple Imac 27 A1312 820-2828-A_MX25L6406E - EFI ribbon cable not compatible (support only GOLDEN PIN silicone cable)

Apple MacBook Pro A1297 820-2914-B-MX25L6406E - EFI ribbon cable not compatible (support only GOLDEN PIN silicone cable)

Apple MacBook Pro A1278-820-2936-B-MXIC MX25L6406E - EFI ribbon cable not compatible (support only GOLDEN PIN silicone cable)

Apple MacBook Pro 13" A1278 820-3115-B MD101 MX25L6406E  - EFI ribbon cable not compatible (support only GOLDEN PIN silicone cable)

In our store also you can find and Chips Cards: 

If you are not from Europe, please inquire about customs tax, VAT of your country.

We do not ship products to Australia with economy Post, only Express.

We do not ship any products to Russia.

Counties: Colombia, Paraguay, Brazil, Mexico, India, UK, Canada and ect - before placing an order, please to ask your customs about tax and duties.

Counties: Colombia, Paraguay, Brazil, Mexico, India, UK, Canada and ect  - antes de realizar un pedido, consulte con la aduana sobre la cantidad de impuestos y aranceles.

Si no eres de Europa, consulta sobre el impuesto de aduanas, el IVA de tu país.