DX1033-1 Adapter for XELTEK SuperPro 6100N

Login to Download: * User manual

Feature:

1. Support all Xilinx devices:

All Virtex FPGA families;

All Spartan FPGA families;

XC9500/XC9500XL/XC9500XV CPLDs;

CoolRunner XPLA3/CoolRunner-II CPLDs;

XC18V00 IPS Proms;

XCF00S/XCF00P Platform Flash PROMS;

XC4000 series FPGAs.

2. Supported on Windows and Red Hat Enterprise Linux.

3. Work with impact,chipscope pro and microblaze embedded processer debugging.

4. Support target system using 5.0V TTL,3.3V LVTTL/LVCMOS,2.5V,1.8V,1.5V.

5. Apply to Xilinx CPLD/FPGA chips download debugging.

6. Support JTAG,Slave Serial,SPI download mode,can configure all Xilinx devices.

7. Xilinx Platform with USB Cable fully compatible.

8. Target device to download the clock options,up to 24MHz.

9. Support Impact and ChipScope.

10. Firmware can be updated automatically.

Package included:

1 x Xilinx Platform Cable USB

1 x 10-pin 2.54mm pitch 15cm flat cable

1 x 14-pin 2.0mm pitch 15cm flat cable

1 x 14-pin 2.54mm pitch 15cm flat cable

1 x 7-pin fly duppont cables

1 x Adapter plate

1 x 6-pin cable

1 x USB Cable

QFN8 turn to DIP16 test seat Adapter Sockets

Pin spacing 1.27mm

The applicable chip size is 8*6MM

OBDSTAR RT100 Remote Tester Frequency/Infrared

OBDSTAR RT100 Remote Tester Frequency Infrared (IR) can detect frequency of car remote control as well as the infrared is working or not, which helps a lot in key programming and car maintenance.

OBDSTAR RT100 Features:

1. Portable Design

2. Easy Operation

3. Screen Display

4. Reliable Data

OBDSTAR RT100 Frequency Test Range:

300Mhz-320Mhz

434Mhz

868Mhz

Way to Test Frequency:

1. Power on the device

2. Put the remote control close to the device

3. Press any button on the remote control

4. The lit indicator shows the frequency

Way to Test Infrared Working or not:

The infrared works well if the indicator lits up after pressing the key button,otherwise,it is in malfunction

Package includes:

1pc x OBDSTAR RT100 Remote Tester Frequency/Infrared

TL866II PLUS Programmer can use for items list:

Login to Download: Download software Device Support List instruction manual

Programmer Overview

1.1 Performance Introduction

Carefully built low-cost professional programmer, high-density chip production process, a

unified user interface, easy to use, functional integrity, application software, reliable

operation, code small, faster execution. supported operating system:

WINXP WIN2003 WIN2008 VISTA WIN7 WIN8 WIN10 32-bit or 64-bit operating system

? The programming speed is greatly improved. It is suitable for small batch production and supports 4 programmers for one computer.

? A wide range of chip support, the initial version supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test, 54/74 and CMOS4000 integrated circuit integrated functional test.

Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits.

25 series Nor Flash capacity support to 512Mbits.

? Pin contact check function, poor contact pin can pinpoint

? Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming

without external power integrated programmer. Portable performance super: the world's smallest volume, size 10CM * 6CM * 2.5CM, only the size of the driver's license.

? Programmable VCC from 1.8V to 6.5V, VPP from 1.8V to 18V chip

? Chip serial number secondary development functions: Programmer built a variety of commonly used automatic numbering function. And can use a custom algorithm to achieve any sequence number through DLL dynamic library. This feature allows you to produce

a unique identification info rmation for each chip in mass production. The logo can also be encrypted with a custom algorithm to more effectively protect your product's rights.

? Universal serial programming interface ICSP (to support both high-voltage parallel programming and low-volt age serial programming). Note: ICSP now supports 24-Series 25 Series 93 Series Serial Integrated Circuits, ATMEL89S51,52, AVR ATMEGAxxx Full

Series, and MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx Full Series, and the new series of SYNCMOS SM59Dxx SM59Rxx fu ll range chips for in-circuit serial programming.

? Powerful 54 / 74F / LS / HC CMOS4000 Series Integrated Functionality Tests: The First Development Programmer to Test Common Logic ICs True, Test Errors Locating Logic Gate Circuits, Test Arbitrary Possible input combinations.

1.2 Programmer chip support range

? Variety of 26 27 28 29 37 39 49 50 series of parallel ROM, EPROM, EEPROM

Fast, full support. Support TSOP32 TSOP40 TSOP48 chips to 64MBits, will join the TSOP56 pin support.

(TL866II programming voltage VPP only supports up to 18V, for early 27C series ROM, the

chip with 21V 25V VPP voltage no longer supports writing, but can be read. If it is used,

the VPP with the same type of programming voltage can be used as 13V or 12V chip replacement, for example: 27C32 21V or 13V Vpp chip,Pay attention to the VPP voltage)

? 24 25 35 45 85 93 95 Series Serial EEPROM

Serial Series Chip Support Full, Supports Chip Capacity 25 Series 8 or 16PIN to 512MBits (64M Bytes)

? NAND FLASH chip supports up to 8Gbits

? MCU series, hundreds of models of 51 series of microcomputer

? AVR microcontroller package scratch ATMEGA series ATtiny series AT90XXX series of microcontrollers, all AVR ATMEGAxxx chip also supports the ICSP interface for SPI serial download programming. Support AVR one-to-one soft-key with RC correction byte.

? MICROCHIP PIC10 PIC12 PIC16 PIC18 Series Microcontroller:

PIC series of more than 300 models, more than 900 package chip support, currently supports

one of the most complete PIC chip integrated programmer. For vario

us types of PIC monolithic, in strict accordance with the manufacturer's manual requirements, the optimal programming, programming speed is excellent. The vast majority of chips support both ISCP online programming and programming through programming sockets.

? GAL programmable logic device programming

? SRAM test

Support for common 24 61 62 DS12 series SRAM test, respectively, to data line testing,

address line testing, memory unit incremental testing and unit testing.

? Super performance 54 / 74F / LS / HC CMO

S4000 series integrated circuit integrated

Function test:

The first development-type programmer to really test common logic ICs to test for errors

that can be located to logic gates, and to test any possible combinations of inputs in an integrated circuit when testing.

Package In clude:

1. 150mil SOP8--DIP8 Adapter

2. 200mil-208mil SOP8--DIP8 Adapter

3. SOP16--DIP16 Adapter

4 PLCC44--DIP40 Adapter

5. PLCC32--DIP32 Adapter

6. PLCC28--DIP24 Adapter

7. PLCC20--DIP20 Adapter

8. 8pin DIP SMD Adapter

9. PLCC IC Extractor

10.SOP 8/SOIC Clip

The writing holder supports the following single-chip microcomputer:

PIC16/18XX 40PIN series devices (Except 16F59)

PIC16/18XX 28PIN series devices

PIC16/18XX 18PIN series devices

PIC 8PIN/14PIN/20PIN series devices

DX4018 Adapter for XELTEK SuperPro 6100N

The original Taiwan block (0.5mm foot distance), has a long service life, suitable for TQFP48, LQFP48, QFP48 and 0.5mm chip size letter spacing.

The suitable model and programmer. Such as: Zhou Ligong, ALL-100GANG, ALL-11 series, LT-48 series, SuperPRO series, TOP series programmer

Support chip: such as STM32F103C8T6, STM32LXX, C8051F340 and so on.

The chip size map:

GX2032 Adapter for XELTEK SuperPro 7500

Default configuration:

10.5*13.5mm

Login to Download: * User Manual Items List

Features:

? 48 Pin ZIF socket with Popular pin-drivers.

? Interface with LAPTOP, PC or compatibles through USB port

? Accepts standard file formats: JEDEC, INTEL (Extended) HEX, HOLTEK, EMC(.CDS), INTEL HEX16, Motorola S record

? Manages 16 and 32-bit word split (Set Programming)

? Features Test Vector capability and multiarray fuse map editor

? Test TTL/CMOS logic ICs and Dynamic/Static Random Access Memory devices

? Optimum programming for each individual device

? Automaticly Identifies the manufacturer and type of E(E)PROMs, Auto identifies TTL/CMOS logic IC

? Device insertion and poor-pin-contact check

? Support 1.5v Low voltage devices

? Not need exterior adapter for mostly devices.

? Universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP adapters

? Auto-run mode starts programming automatically upon detection of chip insertion

? Supports WindowsXP/Vista/ Windows 7 (32bit and 64bit)/ Windows 8 (32bit and 64bit)

? Supports ten languages, such as Chinese(Simplified), Chinese(Traditional), English, Korean, Poland, Italian, Portuguese, Dutch, Turkish and Hungary.

Specification:

? Dimension: 1689823mm

? weight: 265g

? Electrical spec. of the AC adapter: AC input 100V to 240V, 50/60Hz, DC output 9V/0.6A

Device Support:

? PROM: N/CMOS E(E)PROM, SeriesE(E)PROM, and FLASH Memory

? PLD: CPLD, EPLD, GAL, PEEL, PALCE and more

? Microcontroller: Atmel, Intel, Microchip, Signetics, Zilog, etc.

IC Test:

? TTL (74 series), CMOS (40/45 series) Logic IC

? DRAM SRAM memory device

Package Including:

1pc x Wellon Programmer VP-598

1pc x USB cable

1pc x VP-598 Manual

1pc x power adapter

SA409T-B4002 Adapter TSOP40/D40 for XELTEK SuperPro 610P 611S