QK0826A

3.5 Inch SAS SATA Tray Caddy Dell 0G302D 0F238F 0X968D R720 R710

Login to Download: * User Manual Buy Probe Accessories

Description

Hantek 6102BE PC USB Digital Storage Oscilloscope 100Mhz 2CH and EXT 250MS/s

Features:

Excellent industrial design-the same anodised aluminium casing as iPad,

which is not only beautiful and tasteful but also greatly enhanced the hardness of aluminum alloy surface,

and has good heat resistance and strong wearability.

Standard USBXI TM interface, easily inserts into USBXI TM housing to make up a combination instrument.

USB2.0 interface, no external power source required, easy to use.

Be suitable for notebook computer, product line maintenance,be used easily on business.

Dimensions (mm):190(L) x100(W) x35(H), be carried easily.

High performance, 250MS/s real-time sampling, 100MHz Bandwidth.

Operating System: Windows 7, Windows NT, Windows 2000, Windows XP,VISTA.

23 measurement functions, PASS/FAIL Check, be suitable for technical application.

Waveform average, persistence, intensity,invert,addition, subtraction, multiplication, division,X-Y plot.

Save waveform in the following: text file, jpg/bmp graphic file, MS excel/word file.

FFT

One computer can connect many DSO, extend channel easily.

LabviewVBVCDelphiC++Builder Second Design instance.

Specifications Table:

Input

Max. sample rate

Real-time sampling:

250MSa/s using one channel(Hantek6102BE)

250MSa/s using one channel(Hantek6212BE)

Channels

2

Bandwidth

100 MHz analog bandwidth(Hantek6102BE)

200 MHz analog bandwidth(Hantek6212BE)

Vertical Resolution

8 bits/channel (Hantek6102BE)

9 bits/channel (Hantek6212BE)

Gain range

Hantek6102BE

10mV ~5V/div @ x1 probe(1,2,5 sequence)

100mV ~ 50V/div @ x10 probe

1V ~ 500V/div @ x100 probe

10V ~ 5KV/div @ x1000 probe

Hantek6212BE

10mV ~10V/div @ x1 probe(1,2,5 sequence)

100mV ~100V/div @ x10 probe

1V ~ 1000V/div @ x100 probe

10V ~ 10KV/div @ x1000 probe

Range

8 divisions

Offset level

+/-4 divisions

Coupling

AC, DC,GND

Offset increments

0.02 div

Impedance

1M ohm

DC accuracy

+/-3%

Input protection

35Vpk (DC + peak AC < 10 kHz, without external attenuation)

Display Mode

Y-T, X-Y and Roll

Timebase

Timebase range

Hantek6102BE

4ns/div-1h/div(1-2-4 sequence)

Hantek6212BE

2ns/div-1h/div(1-2-4 sequence)

Acquisition mode

Hantek6102BE

Real-time sampling: 4ns/div-400ms/div.

Roll mode: 1s/div-1h/div

Hantek6212BE

Equivalent sampling: 2ns/div ~ 4us/div

Real-time sampling: 10us/div ~ 400ms/div

Roll mode: 1s/div ~ 1h/div

Range

10 divisions

Buffer Size

10K ~ 1M

Trigger

Type

Hantek6102BE

Edge trigger

Hantek6212BE

Edge trigger, Pulse Trigger

Mode

Auto, Normal and Single

LEAD-FREE TITANIUM ALLOY SOLDERING POT

Operation instruction

Login to Download: * Manual Download

Our Lead-free titanium alloy soldering pot passed by SGS, built-in advanced microcomputer digital control and display system, make it more safe, more steady and more accurate. Its a good tool for electronic fields.

FEATURES:

* With big power heater, only within 25minutes to reach 450? from room temperature, (Different items with a little different heating time.)

* With advanced microcomputer digital control and double displays. make it more accurate heating and fast temperature returning capability.

* The boiler made of titanium alloy, can resist high temperature, cauterization and abrasion, largely prolong the life.

* With temperature setting and locking function, will not be affected by wrong operation.

* The setting value will be saved for long time, and can not be affected by power on or off. With auto sleeping function, prolong the machines life.

* With malfunction alarm.

Working conditions:

Working voltage: AC22010V

Working temperature: 0-55?

Working temperature: < 90% no dew

WARNING:

1. The soldering pot must be put on the balanced and ovenproof working desk, prevent the glowing tin go out of the pot. And also take care of the hot tin and the hot body.

2. Do not put other pb items together with the lead-free soldering pot, prevent pb pollution. If cause the products do not eligible, then we wont take on this liability.

3. It cant be used where it will be exposed to ignitable or corrosive materials and gases.

4. If you need to move the soldering pot, please turn off the switch and move it after the pot turn cool.

5. The pot is a hot equipment, if you no need to use, please shut off the switch, and put out the plug.

6. In order to keep it safe and prolong the life, its better stop working after it has worked more than 12hours.

7. Do not heating the pot when its empty, and use the power supplier with grounding cord.

8. The pot is made of titanium which import from Japan, after it is heated by hot temperature, the color will turn to golden or blue, its natural for the material.

OPERATION:

1. Set temperature:

Press the * button, the left LED will display ?,and the right LED will display numerical value, then press the + or -button, temperature will go up or down. Press * button, the value of temperature will be saved.

2. Microcomputer adjusting itself

If the temperature has obvious discrepancy, we can adjust the inside P, I, D value, it will make the pot with accurate control, the followings are two ways of P, I, D adjusting:

A. Auto adjusting

Keep pressing + button, then press * , the left LED will display AT; the right LED will display _ _ _. Then press ? or + change the _ _ _ to AT, this time please press * for 3 times, then the pot will begin P, I, D adjusting itself. Usually it will take for about 15-30 minutes to finish this adjusting, during this adjusting the temperature will fluctuate obviously, but its no wonder. Usually, we do not recommend the users use P, I, D adjusting.

B. Adjust the value of P, I, D by manual (Do not advise users use this way, its fit for the engineers who know P, I, D very well, otherwise maybe cause bad temperature control. If really need, we just recommend the first way.) The operation as follows: Keep pressing + , then press * , the LED will display above (A) setting mode, press * again the LED will display the value of P, I, D. Manual adjusting just can be set the original value.

Remarks: The original of P, I, D value is: P=20, I=80, D=20; If the temperature in

confusion, please set the P, I, D value as original value.

3. Calibration between display and real temperature.

After the heater was replaced or the sensor was oxidated, the temperature will occur warp, the users need to calibrate the pot termly, and as the follow steps:

A. Press CAL button (If your pot without this button, please open the front cover, there is a black button on the PCB of temperature control, that is CAL), the right LED will display OFF, keep pressing ? , and press * at the same time, the left LED will display LOC, the right LED will display -3-, then press * for 3 times (just this button, do not press any other buttons), the LED will display: The first time: Left ?H, right 999; The second time: Left ?L, right 0; The third time: Left ?L, then please input the value of temperature compensation. This value is the warp between display temperature and real temperature. For example, the real temperature is more 5? higher than the display temperature, it can use ? to set -5; If the real temperature is 5? less than the display temperature, it can use + to set 5.

B. The warp temperature is the value to input, after finish setting, press * again, the set value will be saved. Then press CAL (If your pot without this button, please open the front cover, there is a black button on the PCB of temperature control, that is CAL), it will come into the ordinary display mode.

TROUBLE SHOOTING:

1. Turn on the switch but no reflection, please check the fuse, and the plug.

2. The LED display setting temperature, but the pot temperature wont go up, it means that the heater is open circuit.

3. The pot display Err when the power switch is turned on, it means that the sensor is open circuit.

DT71 intelligent Mini Digital tweezers hand-held bridge measurement LCR DVF components signal generator multimeter

Cooling Fan for MSI GE60 MS-16GA MS-16GC

Part Number MSI GE60 MS-16GA MS-16GC Manufacturer China

Voltage 5V Type CPU Fan

Power Connection 3-Pin Brand Unbranded/Generic

Features

Auto ranges

550V protection in resistance and capacitance ranges Large LCD display,MAX display 4000 counts

Sample rate: 3 times per second

Data hold

Polarity identification Low voltage indication

low current measurement Auto power off

Main measurements:AC/DC Voltage, Resistance,Capacitance,Diode and Continuity Testing,

Frequency and duty cycle.

*Frequency:1Hz to 10MHz

*Capacitance :10pF to 4000uF*

AC volts: 0.1mV to 750V

*DC volts:0.1mV to 1000V

*Resistance :0.1O to 60MO

*Duty cycle:1% to 99%

Multimeter Specifications

(1)Capacitance :4nF(5.0%+4),40nF(2.5%+4),400nF/4.000uF/40.00uF/400.0uF/1000uF /4000uF(3.5%+4)

(2)DC volts:400mV/4V/40V(0.5%+4),400V/600V(0.8%+4)

(3)AC volts: 400mV(1.5%+4), 4V/40V/400V(1.2%+4),600V(1.5%+4)

(4)Resistance :400O/4K/40K/400K/4M(0.8%+4),40MO(2.0%+4)

(5)Frequency:99.5/999.5/9.999k/99.99k/999.9k/9.999MHz (0.08%+2)

(6)Duty cycle:0.1% to 99.9%(0.08%+2)

(7) Measurement mode: ?S mode

(8)Over range indication: OL

(9)Working environment: 0~40?, relative humidity < 80%(13)Supply power: 3V (1.5V AAA batteries * 2 Pcs)

(10)Dimension: 80*120*19mm

(11)Weight: 126g

(12)Accessories: User's manual,a pair of test leads

Package Included

1 x Pocket Digital Autoranging Multimeter

Buy Tweezers Set: * VETUS ESD-10 ESD-11 ESD-12 ESD-13 ESD-14 ESD-15 ESD-16

Instruction:

This product is a battery-powered, auto-ranging, true RMS digital multimeter with a 4000 counts LCD display.

Features:

- Display:4000 counts

- Ture RMS:v

- Ranging:Auto

- Data Hold:v

- Material:ABS+PVC

- Backlight:v

- Flashlight:v

- Update Rate:3/s

- Low battery indication:v

- Continuity testing:v

- NCV function:v

- Auto power off:

- Size:118*59*28mm

Specifications:

DC Voltage:4V/40V/400V/600V (0.5%+3);

AC Voltage:4V/40V/400V/600V (1.0%+3);

AC Current:999.9mA (1.0 +3);9.999A (1.0 +3);

DC Current:999.9mA (2.0 +4);9.999A (2.0 +4);

Resistance:4KO(1.5 +3);40KO/400KO/4MO(0.5 +3);40O(1.5 +3);

Frequency response at AC modes:40Hz~1kHz;

Packing List:

1*Digital Multimeter

1*Test leads

1*English user Manual

1*Color box

Mini digital multimeter ZT-S1/S2,data hold function, blue backlight display ,High quality digital multimeter,Measurable: battery, ACV, DCV, DCA, resistance, continuou buzzer etc.

Mini 3 3/4digital multimeter, maximum display 3999

Flashlight function

NCV function

Super anti-burning

CCTV 4 COLOR CHANNELS QUAD VIDEO SECURITY SYSTEM VGA PROCESSOR FOUR COLOR PROCESSOR CCTV CAMERA

Description:

100% Brand New And High Quality

Display Count: 2000

Manual Range: v

Diode: v

Transistor: v

Auto Power Off: v

Continuity Buzzer: v

Data Hold: v

Low Battery Indication: v

Full Icon Display: v

Input Impedance for DCV: Around 10MO

Test Lead Connection Indications: v

Specifications:

Model: UT58D

DC Voltage (V): 200mV/20V/200V/1000V (0.5%+1)

AC Voltage (V): 2V/200V/1000V (0.8%+3

DC Current (A): 2mA/20mA/20A (0.8%+1)

AC Current (A): 2mA/20mA/20A (1%+3)

Resistance (O): 200O/2KO/200KO/2MO/20MO (0.8%+1)

Capacitance (F): 20nF/200nF/2F/100F (2.5%+5)

Inductance (H): 2mH/20mH/200mH/20H (2%+10)

General Characteristic:

Power: 9V Battery(6F22)(included)

LCD Size: 6.7 * 6.5cm

Product Color: Red and Grey

Product Net Weight: 350g (Including holster)

Product Size: 17.9 * 8.8 * 3.9cm / 7.4 * 3.5 * 1.6in

Package Weight: 577g / 1.3lb

Package includes:

1 x UNI-T UT58D Digital Multimeter

2 x Test Lead

1 x Muli-Purpose Socket

1 x English Manual

Because of the airspace controls not include battery

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock