• Show Sidebar

There are 1187 products.

Active filters

  • Categories: CPU and Graphic Chips
  • Categories: Laptop Parts, Repair tool
  • Categories: Pin Holder
  • Condition: New

20m S993A S995A Pump Solder Sucker Gun Suction nozzle

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH004586
€8.58

2.0m S-993A S-995A Pump Solder Sucker Gun Suction nozzle

12pcsset 900MT KINGBOX 936 leadfree soldering iron head thermostatic head

Taiwan lead-free high quality 936 iron head

Characteristic:

1. special cast iron process, corrosion resistance, oxidation resistance, especially for long life.

2. strong immersion prolonged, easy to melt, Shangxi, solder joint round.

3. ? uniform inductance, stable quality, lead-free material.

4. lead-free environmental production, has passed the SGS test.

All soldering stations used in the 900M-T series

Such as table machine, 936 series welding platform

900M series lead-free soldering iron

? made of pure copper components, high thermal conductivity, fast heat transfer

? special iron surface plating, high temperature resistance, corrosion resistance

Special process, suitable for lead-free solder welding

? strong tin capacity, no oxidation, no tin, no tin, tin climbing phenomenon

? the outer layer is bright and delicate and very strong in rust resistance

? this product has passed the SGS environmental protection test

Life of soldering iron head

The life of the iron head is determined by the number of welds, and the length of life guaranteed depends on the coating thickness of the head. The thicker the coating, the longer the life of the iron head, but the heat transfer efficiency will be greatly reduced, the life of the iron tip for the same temperature series of iron head, fine iron head, life expectancy than a rough iron head life is shorter. Because the iron head is working, it will inevitably cause wear and tear on the surface of the nozzle life. Therefore, the fine iron head is more prone to wear, so to reduce the life of the soldering iron.

Maintenance of iron head

The use of new electric iron, electric iron can not bring the new use, need to be plated with a layer of solder in the iron head method is: according to the power supply when the temperature gradually increased, the rosin coated iron head; rosin smoke, to melt the solder iron head, with a the solder layer so as to strengthen the tip life.

CH004609
€29.71

12pcs/set 900M-T KINGBOX 936 lead-free soldering iron head thermostatic head

Andonstar ADSM201 HDMI 1080 Digital Microscope Electronics Inspection PCB Repair

Andonstar ADSM201 HDMI 1080P Digital Microscope Electronics Inspection PCB Repair

Login to Download: Download software User Manual

Product Description

The Andonstar HDMI USB Digital Microscope is for PCB soldering repair. Top quality, elegant appearance, HD video, real time imagery, smooth and clear, sturdy and durable. If you need one, don't hesitate, it's the best choice for you.

Advantages

1. 300 times magnification, 1920*1080P, 30fps, HDMI out, and high quality non-interpolate Large CMOS sensor.

2. Digital zoom, 4.

3. Ample working distance: 4cm - 15cm.

4. Bring dual lights own, reduce inverted image, help illuminate your target object.

5. Reasonable depth of field: our microscope makes it quite clear to see no matter how complicated the structure of object is.

6. Exclusive lens: reduce veiling glare and prevent from harm of smudging which produced in the process of soldering.

7. Real time imagery, smooth and clear, no smear, no lag or latency.

8. Metal stand, sturdy and durable, demonstrates quality. The camera also supports stabilisation technology, very little camera shake when working on an item on the platform.

9. Software is compatible in windows 7 and windows 8 and no driver is needed.

Operate steps

General mode (without PC & HDMI display )

1. keep press on/off button to turn on the camera (We advise you connect the external power supply when you do some operation as the battery can't work for long time alone).

2.Press menu button to do set up. Use the up and down to choose. And press menu again to quit when you finish that.

3.Press OK to record your operation, and OK to stop it. During that time, you can press up or down to amplify or reduce the view.

4.Press M button, which means capture picture, to get into capture mode, and press OK to capture a picture.

5.Press M button again to get into play back mode. Use the up and down button to choose the file you want to check. When you find the file, press menu button, you can delete/protect/slide show the file. Press M button again to quit this mode (PS: If the file didnt been protect, when the memory card is full, it will be cover by the new files).

USB 2.0 output mode (PS: At this USB output mode, maximum resolution ratio can only get to 1080*720P )

1.Connect the microscope with the PC.

2. 2 Options will show on the screen of microscope: PC camera & Mass storage. Choose the PC camera.

3.Open the software, the title will show the storage path.

4.Record a video: Capture?start capture?OK?stop capture.

5.The video will automatic be saved as the path which the title shows. If you want a copy file in case the next time be covered by other videos, you can click File?save capture video, and change the name of the file.

6.Capture a picture:

Capture?still?enable

Capture?still?folder(choose a storage path)

Capture?snap(capture a picture, or you can just press Enter on your keyboard)

HDMI display output mode (PS: At this mode, maximum resolution ratio can reach to 1920*1080)

1. Connect the microscope with the HDMI display.

2. Rest step just like in general mode.

Notice

1. Keep the tool dry, clean, free from oil, water, gas or other materials capable of causing corrosion.

2. Keep bystanders, children away while operating the tool.

3. Do not overreach, keep proper footing and balance at all time.

Feature

Top quality with elegant appearance

Ample working distance

Reasonable depth of field

Exclusive lens reduce veiling glare

Smooth and clear real time imagery

Sturdy and durable

Demonstrates quality

The camera also supports stabilisation technology

Amazing effect of HDMI export

Bring dual lights own helps illuminate your target object

Specifications

Power source: 5V DC

Image sensor: 3 Mega Pixels

Video output: 1080p Full HD

Video format: MOV

Photo format: JPEG

Magnification ratio: 10x - 300x

Frame rate: Max 30f/s under 600 Lus brightness

Focus range: Manual focus 10 - 500 mm (0.4 - 19.7 inch)

Video-output interface: HDMI, to any monitor with HDMI-In

Storage: Micro SD card, up to 32G(Not include)

Working distance: 4 - 15 cm (1.6 - 5.9 inch)

Size of the metal stand: 8 x 14.5 cm (3.2 x 5.7 inch)

Package size: 25 x 18.5 x 8.3 cm (9.9 x 7.3 x 3.3 inch)

Weight: 1.2 kg (2.7 lbs)

Package Content

1 x Digital Microscope Host

1 x Metal Base Stand (2 LED Lights On The Stand)

1 x HDMI Cable

1 x USB Cable

1 x Adapter

CH004652
€139.24

Andonstar ADSM201 HDMI 1080 Digital Microscope Electronics Inspection PCB Repair

20m S993A S995A Pump Solder Sucker Gun Suction nozzle

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH004586
€8.58

2.0m S-993A S-995A Pump Solder Sucker Gun Suction nozzle

12pcsset 900MT KINGBOX 936 leadfree soldering iron head thermostatic head

Taiwan lead-free high quality 936 iron head

Characteristic:

1. special cast iron process, corrosion resistance, oxidation resistance, especially for long life.

2. strong immersion prolonged, easy to melt, Shangxi, solder joint round.

3. ? uniform inductance, stable quality, lead-free material.

4. lead-free environmental production, has passed the SGS test.

All soldering stations used in the 900M-T series

Such as table machine, 936 series welding platform

900M series lead-free soldering iron

? made of pure copper components, high thermal conductivity, fast heat transfer

? special iron surface plating, high temperature resistance, corrosion resistance

Special process, suitable for lead-free solder welding

? strong tin capacity, no oxidation, no tin, no tin, tin climbing phenomenon

? the outer layer is bright and delicate and very strong in rust resistance

? this product has passed the SGS environmental protection test

Life of soldering iron head

The life of the iron head is determined by the number of welds, and the length of life guaranteed depends on the coating thickness of the head. The thicker the coating, the longer the life of the iron head, but the heat transfer efficiency will be greatly reduced, the life of the iron tip for the same temperature series of iron head, fine iron head, life expectancy than a rough iron head life is shorter. Because the iron head is working, it will inevitably cause wear and tear on the surface of the nozzle life. Therefore, the fine iron head is more prone to wear, so to reduce the life of the soldering iron.

Maintenance of iron head

The use of new electric iron, electric iron can not bring the new use, need to be plated with a layer of solder in the iron head method is: according to the power supply when the temperature gradually increased, the rosin coated iron head; rosin smoke, to melt the solder iron head, with a the solder layer so as to strengthen the tip life.

CH004609
€29.71

12pcs/set 900M-T KINGBOX 936 lead-free soldering iron head thermostatic head

Cooling Fan for MSI GE70 MS1756 MS1757

Cooling Fan for MSI GE70 MS-1756 MS-1757

Part Number MSI GE70 MS-1756 MS-1757 Manufacturer China

Voltage 5V Type CPU Fan

Power Connection 3-Pin Brand Unbranded/Generic

CH004615
€7.46

Cooling Fan for MSI GE70 MS-1756 MS-1757

Andonstar ADSM201 HDMI 1080 Digital Microscope Electronics Inspection PCB Repair

Andonstar ADSM201 HDMI 1080P Digital Microscope Electronics Inspection PCB Repair

Login to Download: Download software User Manual

Product Description

The Andonstar HDMI USB Digital Microscope is for PCB soldering repair. Top quality, elegant appearance, HD video, real time imagery, smooth and clear, sturdy and durable. If you need one, don't hesitate, it's the best choice for you.

Advantages

1. 300 times magnification, 1920*1080P, 30fps, HDMI out, and high quality non-interpolate Large CMOS sensor.

2. Digital zoom, 4.

3. Ample working distance: 4cm - 15cm.

4. Bring dual lights own, reduce inverted image, help illuminate your target object.

5. Reasonable depth of field: our microscope makes it quite clear to see no matter how complicated the structure of object is.

6. Exclusive lens: reduce veiling glare and prevent from harm of smudging which produced in the process of soldering.

7. Real time imagery, smooth and clear, no smear, no lag or latency.

8. Metal stand, sturdy and durable, demonstrates quality. The camera also supports stabilisation technology, very little camera shake when working on an item on the platform.

9. Software is compatible in windows 7 and windows 8 and no driver is needed.

Operate steps

General mode (without PC & HDMI display )

1. keep press on/off button to turn on the camera (We advise you connect the external power supply when you do some operation as the battery can't work for long time alone).

2.Press menu button to do set up. Use the up and down to choose. And press menu again to quit when you finish that.

3.Press OK to record your operation, and OK to stop it. During that time, you can press up or down to amplify or reduce the view.

4.Press M button, which means capture picture, to get into capture mode, and press OK to capture a picture.

5.Press M button again to get into play back mode. Use the up and down button to choose the file you want to check. When you find the file, press menu button, you can delete/protect/slide show the file. Press M button again to quit this mode (PS: If the file didnt been protect, when the memory card is full, it will be cover by the new files).

USB 2.0 output mode (PS: At this USB output mode, maximum resolution ratio can only get to 1080*720P )

1.Connect the microscope with the PC.

2. 2 Options will show on the screen of microscope: PC camera & Mass storage. Choose the PC camera.

3.Open the software, the title will show the storage path.

4.Record a video: Capture?start capture?OK?stop capture.

5.The video will automatic be saved as the path which the title shows. If you want a copy file in case the next time be covered by other videos, you can click File?save capture video, and change the name of the file.

6.Capture a picture:

Capture?still?enable

Capture?still?folder(choose a storage path)

Capture?snap(capture a picture, or you can just press Enter on your keyboard)

HDMI display output mode (PS: At this mode, maximum resolution ratio can reach to 1920*1080)

1. Connect the microscope with the HDMI display.

2. Rest step just like in general mode.

Notice

1. Keep the tool dry, clean, free from oil, water, gas or other materials capable of causing corrosion.

2. Keep bystanders, children away while operating the tool.

3. Do not overreach, keep proper footing and balance at all time.

Feature

Top quality with elegant appearance

Ample working distance

Reasonable depth of field

Exclusive lens reduce veiling glare

Smooth and clear real time imagery

Sturdy and durable

Demonstrates quality

The camera also supports stabilisation technology

Amazing effect of HDMI export

Bring dual lights own helps illuminate your target object

Specifications

Power source: 5V DC

Image sensor: 3 Mega Pixels

Video output: 1080p Full HD

Video format: MOV

Photo format: JPEG

Magnification ratio: 10x - 300x

Frame rate: Max 30f/s under 600 Lus brightness

Focus range: Manual focus 10 - 500 mm (0.4 - 19.7 inch)

Video-output interface: HDMI, to any monitor with HDMI-In

Storage: Micro SD card, up to 32G(Not include)

Working distance: 4 - 15 cm (1.6 - 5.9 inch)

Size of the metal stand: 8 x 14.5 cm (3.2 x 5.7 inch)

Package size: 25 x 18.5 x 8.3 cm (9.9 x 7.3 x 3.3 inch)

Weight: 1.2 kg (2.7 lbs)

Package Content

1 x Digital Microscope Host

1 x Metal Base Stand (2 LED Lights On The Stand)

1 x HDMI Cable

1 x USB Cable

1 x Adapter

CH004652
€139.24

Andonstar ADSM201 HDMI 1080 Digital Microscope Electronics Inspection PCB Repair