List of products by brand Chipsetpro.com

  • Show Sidebar

There are 5080 products.

XGecu T56 Universal Programmer 6 Adapters EDID code

XGecu T56 Universal Programmer Support NAND/EMMC/MCU/ISP

Login to Download: Download software Device Support List instruction manual EDID code Reading & Writing Use

Programmer Overview

1.1 Performance Introduction

Carefully built low-cost professional programmer, high-density chip production process, a

unified user interface, easy to use, functional integrity, application software, reliable

operation, code small, faster execution. supported operating system:

WINXP WIN2003 WIN2008 VISTA WIN7 WIN8 WIN10 32-bit or 64-bit operating system

? The programming speed is greatly improved. It is suitable for small batch production and supports 4 programmers for one computer.

? A wide range of chip support, the initial version supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test, 54/74 and CMOS4000 integrated circuit integrated functional test.

Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits.

25 series Nor Flash capacity support to 512Mbits.

? Pin contact check function, poor contact pin can pinpoint

? Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming

without external power integrated programmer. Portable performance super: the world's smallest volume, size 10CM * 6CM * 2.5CM, only the size of the driver's license.

? Programmable VCC from 1.8V to 6.5V, VPP from 1.8V to 18V chip

? Chip serial number secondary development functions: Programmer built a variety of commonly used automatic numbering function. And can use a custom algorithm to achieve any sequence number through DLL dynamic library. This feature allows you to produce

a unique identification info rmation for each chip in mass production. The logo can also be encrypted with a custom algorithm to more effectively protect your product's rights.

? Universal serial programming interface ICSP (to support both high-voltage parallel programming and low-volt age serial programming). Note: ICSP now supports 24-Series 25 Series 93 Series Serial Integrated Circuits, ATMEL89S51,52, AVR ATMEGAxxx Full

Series, and MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx Full Series, and the new series of SYNCMOS SM59Dxx SM59Rxx fu ll range chips for in-circuit serial programming.

? Powerful 54 / 74F / LS / HC CMOS4000 Series Integrated Functionality Tests: The First Development Programmer to Test Common Logic ICs True, Test Errors Locating Logic Gate Circuits, Test Arbitrary Possible input combinations.

1.2 Programmer chip support range

? Variety of 26 27 28 29 37 39 49 50 series of parallel ROM, EPROM, EEPROM

Fast, full support. Support TSOP32 TSOP40 TSOP48 chips to 64MBits, will join the TSOP56 pin support.

(TL866II programming voltage VPP only supports up to 18V, for early 27C series ROM, the

chip with 21V 25V VPP voltage no longer supports writing, but can be read. If it is used,

the VPP with the same type of programming voltage can be used as 13V or 12V chip replacement, for example: 27C32 21V or 13V Vpp chip,Pay attention to the VPP voltage)

? 24 25 35 45 85 93 95 Series Serial EEPROM

Serial Series Chip Support Full, Supports Chip Capacity 25 Series 8 or 16PIN to 512MBits (64M Bytes)

? NAND FLASH chip supports up to 8Gbits

? MCU series, hundreds of models of 51 series of microcomputer

? AVR microcontroller package scratch ATMEGA series ATtiny series AT90XXX series of microcontrollers, all AVR ATMEGAxxx chip also supports the ICSP interface for SPI serial download programming. Support AVR one-to-one soft-key with RC correction byte.

? MICROCHIP PIC10 PIC12 PIC16 PIC18 Series Microcontroller:

PIC series of more than 300 models, more than 900 package chip support, currently supports

one of the most complete PIC chip integrated programmer. For vario

us types of PIC monolithic, in strict accordance with the manufacturer's manual requirements, the optimal programming, programming speed is excellent. The vast majority of chips support both ISCP online programming and programming through programming sockets.

? GAL programmable logic device programming

? SRAM test

Support for common 24 61 62 DS12 series SRAM test, respectively, to data line testing,

address line testing, memory unit incremental testing and unit testing.

? Super performance 54 / 74F / LS / HC CMO

S4000 series integrated circuit integrated

Function test:

The first development-type programmer to really test common logic ICs to test for errors

that can be located to logic gates, and to test any possible combinations of inputs in an integrated circuit when testing.

Packing List:

1 * XGecu T56 universal programmer.

1 * BGA48 Adapter(LFBGA48, 8*6mm, spacing 0.8mm)

1 * BGA63 Adapter(11*9mm)

1 * XG-ADP-BGA64A-1.0 Adapter(11*13mm,10*13mm,10*15mm)

1 * BGA169 Adapter(11.5*13mm,11*10mm,12*16mm,14*18mm)

1 * TSOP56/48/40/32 Adapter

1 * ADP-SSO-056-0.8 Adapter

1 * LCD LED screen EDID Cable

CH001384
Brands: Chipsetpro.com

Chipsetpro.com

Chipsetpro.com

€395.34

XGecu T56 Universal Programmer + 6 Adapters EDID code

XGecu T56 Universal Programmer Support NANDEMMCMCUISP

XGecu T56 Universal Programmer Support NAND/EMMC/MCU/ISP

Login to Download: Download software Device Support List instruction manual

Programmer Overview

1.1 Performance Introduction

Carefully built low-cost professional programmer, high-density chip production process, a

unified user interface, easy to use, functional integrity, application software, reliable

operation, code small, faster execution. supported operating system:

WINXP WIN2003 WIN2008 VISTA WIN7 WIN8 WIN10 32-bit or 64-bit operating system

? The programming speed is greatly improved. It is suitable for small batch production and supports 4 programmers for one computer.

? A wide range of chip support, the initial version supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test, 54/74 and CMOS4000 integrated circuit integrated functional test.

Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits.

25 series Nor Flash capacity support to 512Mbits.

? Pin contact check function, poor contact pin can pinpoint

? Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming

without external power integrated programmer. Portable performance super: the world's smallest volume, size 10CM * 6CM * 2.5CM, only the size of the driver's license.

? Programmable VCC from 1.8V to 6.5V, VPP from 1.8V to 18V chip

? Chip serial number secondary development functions: Programmer built a variety of commonly used automatic numbering function. And can use a custom algorithm to achieve any sequence number through DLL dynamic library. This feature allows you to produce

a unique identification info rmation for each chip in mass production. The logo can also be encrypted with a custom algorithm to more effectively protect your product's rights.

? Universal serial programming interface ICSP (to support both high-voltage parallel programming and low-volt age serial programming). Note: ICSP now supports 24-Series 25 Series 93 Series Serial Integrated Circuits, ATMEL89S51,52, AVR ATMEGAxxx Full

Series, and MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx Full Series, and the new series of SYNCMOS SM59Dxx SM59Rxx fu ll range chips for in-circuit serial programming.

? Powerful 54 / 74F / LS / HC CMOS4000 Series Integrated Functionality Tests: The First Development Programmer to Test Common Logic ICs True, Test Errors Locating Logic Gate Circuits, Test Arbitrary Possible input combinations.

1.2 Programmer chip support range

? Variety of 26 27 28 29 37 39 49 50 series of parallel ROM, EPROM, EEPROM

Fast, full support. Support TSOP32 TSOP40 TSOP48 chips to 64MBits, will join the TSOP56 pin support.

(TL866II programming voltage VPP only supports up to 18V, for early 27C series ROM, the

chip with 21V 25V VPP voltage no longer supports writing, but can be read. If it is used,

the VPP with the same type of programming voltage can be used as 13V or 12V chip replacement, for example: 27C32 21V or 13V Vpp chip,Pay attention to the VPP voltage)

? 24 25 35 45 85 93 95 Series Serial EEPROM

Serial Series Chip Support Full, Supports Chip Capacity 25 Series 8 or 16PIN to 512MBits (64M Bytes)

? NAND FLASH chip supports up to 8Gbits

? MCU series, hundreds of models of 51 series of microcomputer

? AVR microcontroller package scratch ATMEGA series ATtiny series AT90XXX series of microcontrollers, all AVR ATMEGAxxx chip also supports the ICSP interface for SPI serial download programming. Support AVR one-to-one soft-key with RC correction byte.

? MICROCHIP PIC10 PIC12 PIC16 PIC18 Series Microcontroller:

PIC series of more than 300 models, more than 900 package chip support, currently supports

one of the most complete PIC chip integrated programmer. For vario

us types of PIC monolithic, in strict accordance with the manufacturer's manual requirements, the optimal programming, programming speed is excellent. The vast majority of chips support both ISCP online programming and programming through programming sockets.

? GAL programmable logic device programming

? SRAM test

Support for common 24 61 62 DS12 series SRAM test, respectively, to data line testing,

address line testing, memory unit incremental testing and unit testing.

? Super performance 54 / 74F / LS / HC CMO

S4000 series integrated circuit integrated

Function test:

The first development-type programmer to really test common logic ICs to test for errors

that can be located to logic gates, and to test any possible combinations of inputs in an integrated circuit when testing.

CH001701
Brands: Chipsetpro.com

Chipsetpro.com

Chipsetpro.com

€159.13

XGecu T56 Universal Programmer Support NAND/EMMC/MCU/ISP

XILINX Platform USB Download Cable Jtag Programmer for FPGA CPLD CMod XC2C64A D

Login to Download: * User manual

Feature:

1. Support all Xilinx devices:

All Virtex FPGA families;

All Spartan FPGA families;

XC9500/XC9500XL/XC9500XV CPLDs;

CoolRunner XPLA3/CoolRunner-II CPLDs;

XC18V00 IPS Proms;

XCF00S/XCF00P Platform Flash PROMS;

XC4000 series FPGAs.

2. Supported on Windows and Red Hat Enterprise Linux.

3. Work with impact,chipscope pro and microblaze embedded processer debugging.

4. Support target system using 5.0V TTL,3.3V LVTTL/LVCMOS,2.5V,1.8V,1.5V.

5. Apply to Xilinx CPLD/FPGA chips download debugging.

6. Support JTAG,Slave Serial,SPI download mode,can configure all Xilinx devices.

7. Xilinx Platform with USB Cable fully compatible.

8. Target device to download the clock options,up to 24MHz.

9. Support Impact and ChipScope.

10. Firmware can be updated automatically.

Package included:

1 x Xilinx Platform Cable USB

1 x 10-pin 2.54mm pitch 15cm flat cable

1 x 14-pin 2.0mm pitch 15cm flat cable

1 x 14-pin 2.54mm pitch 15cm flat cable

1 x 7-pin fly duppont cables

1 x Adapter plate

1 x 6-pin cable

1 x USB Cable

CH001109
Brands: Chipsetpro.com

Chipsetpro.com

Chipsetpro.com

€24.74

XILINX Platform USB Download Cable Jtag Programmer for FPGA CPLD C-Mod XC2C64A D

XPOWERS AXP192

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH002090
Brands: Chipsetpro.com

Chipsetpro.com

Chipsetpro.com

€3.45

X-POWERS AXP192

XPOWERS AXP193

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000511
Brands: Chipsetpro.com

Chipsetpro.com

Chipsetpro.com

€3.45

X-POWERS AXP193

XPOWERS AXP199

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH002605
Brands: Chipsetpro.com

Chipsetpro.com

Chipsetpro.com

€3.45

X-POWERS AXP199

XPOWERS AXP202

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH003930
Brands: Chipsetpro.com

Chipsetpro.com

Chipsetpro.com

€3.45

X-POWERS AXP202

XPOWERS AXP209

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH002891
Brands: Chipsetpro.com

Chipsetpro.com

Chipsetpro.com

€3.45

X-POWERS AXP209

XPOWERS AXP221

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH002824
Brands: Chipsetpro.com

Chipsetpro.com

Chipsetpro.com

€3.45

X-POWERS AXP221

XPROG Box ECU Programmer XPROGM V612 with USB Dongle

Latest Released Xprog V6.12 ELDB Add more function XPROG-M ECU Programmer With USB Dongle

Software V6.12 Firmware V5.4

Top 5 Reasons to Get Newest XPROGV6.12:

New Generation Hardware, runs more steady and faster than oldversion.

Latest software version: V6.12 ,Firmware V5.4

Language: English

Operating system: WinXP/Win7/Win8

Add More Authoirzation than old version:

Add new authorization:

AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9

AUTH-0028-3 Renesas RL78Authorized and AUTH-0028-4 Renesas M32C Authorized(New Add)

XPROG V6.12 using tips:

1.XPROG V6.12 dongle isn't compatible with older version Xprog. You are not allowed to update from the older version Xprog V5.55 V5.60 V5.70 V5.84 to this newest V6.12 XPROG-M Dongle.

2. Please Close all anti-virus software in your computer, becaUse the anti-virus software will kill Xprog V6.12 driver and software.

3. Disconnect internet. Or V6.12 XPROG-M hardware may be damaged .

4. Uninstall all the old version XPROG software before you install V6.12 software, because XPROG V6.12 hardware is not compatible with other version XPROG software. Otherwise the hardware will be damaged and its warranty will be invalid.

5. Never try to UPDATE it, the hardware will be damaged if you try to update it online. Warranty will be invalid

Install Notice:

Please windows system required as below:

1.Windows system should be windows XP 32bit OR windows 7 64 bit, all the patchsoftware for the windows system should be installed already and the windowsproperly works well...

2.The windows system should be with at lest 2 partitions (except the CD ROM.)

3.Can not be working with virtual harddisk.

Install Steps Manual:

1.Click the file "installation.reg", get the file information to theregedit.

2.Install the file "AdbeRdr11000_zh_CN.exe", it is a must, otherwisethe Xprog software will not start.

3.Plug the Xprog main interface to the computer, install the USB driver.

4.Copy the folder "XPROG-BOX6.12" to the desktop, and open it, and runthe "xprogdesktop.exe", then software open.

XPROG V6.12 Authorizations:

AUTH-0001Motorola HC05 family authorization (allows to read/write EEPROM)

AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)

AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)

AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROMand flash memory)

AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows toread/write EEPROM)

AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization(allows to read/write secured EEPROM and flash memory)

AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.

AUTH-0008 BMW EWS3 authorization

AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flashmemory)

AUTH-0010 MB ZGS001 authorization

AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypasssecurity bit and read EEPROM and RAM memory)

AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)

AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)

AUTH-0015 MPC5xx authorization (depending on device program automaticallydetects MPC5xx, M95xxx device type, flash, external flash and configurationmemory size)

AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization(allows to read/write secured EEPROM and flash memory)

AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/writeinternal flash and external serial EEPROM)

AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows toread/write secured and non-secured internal flash and external serial EEPROM,view ange mileage, Chassis number (VIN), serial number and PIN code).

AUTH-0023-1 MAC7xxx

AUTH-0023-2 XC23xx

AUTH-0024-1 MC9S12Cxx

AUTH-0024-2 MC9S12XE

AUTH-0024-3 9S12XE SECURITY

AUTH-0024-4 MC9S12HA/HY/P

AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13

AUTH-0027-1HC(S)908 update Authorized 2016/3/13

AUTH-0027-2HC(S)908 sercurity Authorized 2016/3/13

AUTH-0028-1Renesas V850 Authorized 2017/10/9

AUTH-0028-2Renesas SuperH Authorized 2017/10/9

AUTH-0028-3Renesas RL78 Authorized ---New!

AUTH-0028-4Renesas M32C Authorized ---New!

XPROG-M V6.12 Adapters Newly Added:

ADP-0019 Rev.B ----New!

ADP-0006 M35080 ICP adapter ---New!

QFP64 MC908AZ/AS60 3K85K adapter ---New!

QO18S714 ---New!

XPROG-M V6.12 Adapters included:

ADP-0001 TMS370 PLCC28 programming adapter

ADP-0002 TMS370 PLCC44 programming adapter

ADP-0003 TMS370 PLCC68 programming adapter

ADP-0004 Motorola HC05B/X PLCC52 programming adapter

ADP-0005 Motorola HC05B/X QFP64 programming adapter

ADP-0006 ST M35080 in-circuit programming adapter

ADP-0008 TMS374 family in-circuit programming adapter

ADP-0009 MC68HC05V12 programming adapter

ADP-0010 TMS374 on-board programming adapter

ADP-0011 HC11EA9/E9 programming adapter

ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass securityadapter

Additional adaptor for 5M48H P-FlashADP-0019Rev.A

EWS3 adaptor

EEPROM adaptor

QFP28 adaptor

QFP64 adaptor

QFP80 adaptor

QFP112 adaptor

QFP144 adaptor

Package List:

1pc x XPROG-Box Hardware (Aluminum Enclosure)

19pc x Adapters Set

1pc x USB Cable

1pc x 16Pin cable

1pc x CD with XPROG-Box Software (V6.12)

CH003946
Brands: Chipsetpro.com

Chipsetpro.com

Chipsetpro.com

€185.24

X-PROG Box ECU Programmer XPROG-M V6.12 with USB Dongle

YAOGONG 8878D 2in1 REWORK STATION

Buy Tweezers Set: * IC Chip Extractor Rework Tweezer Tool

Description :

Model 8878D series portable microcomputer hot air gun, it is our company new design type.

Which are applicable to repair SMT electronic products, portable soldering tool.

This product uses the long life far infrared heating .element and the special temperature components.

And the precision microcomputer control of hot runner technology, make the gun temperature control curve fully conform to the requirements of the SMT production process of soldering.

The soldering iron adopts a long life 1321 white core, and the precise PID temperature control technology makes the temperature error of the soldering iron small, and the work is stable and reliable.

At the same time, the functions of air gun manual and automatic, soldering iron sleep and temperature compensation are increased.

Make the products with energy saving, small size, convenient, long-life, security and so on.

Specification :

Air gun Soldering iron

Operating frequency 50-60Hz 50-60Hz

Operating voltage AC110V10%/AC220V10% AC110V10%/AC220V10%

Adjustable temperature 100-480? 200-480?

Adjustable pressure 1-10

Storage humidity 35%-45% 35%-45%

Manual/automatic function Yes No

Compensation temperature -99? to 99? -99? to 99?

Sleeping time 0-99minutes

Rated power 700W 200W

Machine size(mm) 128*70*31

Net weight 1.2KG

Instructions :

1. When the power is connected, the buzzer will ring, indicating that the power is initialized.

2. Turn on the air gun, shor t press the air gun switch, the air gun is turned on.

3. Turn on the soldering iron, shor t press the soldering iron switch, the soldering iron is turned on.

4. Set the temperature of the air gun, shor t press the "*" button until the number of the air gun display screen is the first time to flash. Press the "?" or "?" button to set the temperature needed for the air gun.

5. Set the air volume of the air gun, shor t press the "* " button until the number of the air gun display screen is second time to flash. When the air gun display screen displays "F" and air volume number, press the "?" or "?" button to set the air volume needed for the air gun.

6. Set the air gun manual / automatic function, shor t press the "* " button until the number of the air gun display screen is third time to flash. When the display screen displays "A (automatic)" or "H (manual)", press the "?" or "?" button to choose the air gun manual / automatic function; When it is in automatic state, the air gun will automatically cool down on the bracket, and will stop working when the temperature is less than 100 ?. When it is in manual state, the air gun will not cool down on the bracket, and will still work normally.

7. Set the air gun compensation temperature, long press the "* " button, then the air gun display screen and the soldering iron display screen will display the respective compensation temperature numbers, then shor t press the "* " button until the air gun display screen numbers is flash, press the "?" or "?" button to set the compensation temperature needed for the air gun.

8. Turn off the air gun, long press the air gun switch, the air gun is turned off.

9. Set the temperature of the soldering iron, shor t press the "* " button until the number of the soldering iron display screen is the first time to flash. Press the "?" or "?" button to set the temperature needed for the soldering iron.

10. Set the sleeping time of the soldering iron, shor t press the "* " button until the number of the soldering iron display screen is the second time to flash. When the soldering iron display screen displays "S" and sleeping time, press the "?" or "?" button to set the sleeping time needed for the soldering iron. The sleeping time of the soldering iron can be set between 0 and 99 minutes. Be careful, when the sleeping time is "00", the solding iron will keep working and not sleep.

11. Set the compensation temperature of the soldering iron, long press the "* " button until the air gun and soldering iron display screen display the respective compensation temperature numbers, then shor t press the "* " button until the soldering iron display screen number is flash. Press the "?" or "?" button to set the compensation temperature needed for the soldering iron.

12. Turn off the soldering iron, long press the soldering iron switch, the soldering iron is turned off.

Note: After entering the setup mode, the machine will automatically exit the setup mode without any key for 5 seconds.

Package includeds :

1 x 8878D 2-in-1 Rework Station

1 x Hot Air Gun with Station

1 x Soldering Iron with Station

3 x Nozzle

CH003093
Brands: Chipsetpro.com

Chipsetpro.com

Chipsetpro.com

€60.92

YAOGONG 8878D 2in1 REWORK STATION

XGecu T56 Universal Programmer 6 Adapters EDID code

XGecu T56 Universal Programmer Support NAND/EMMC/MCU/ISP

Login to Download: Download software Device Support List instruction manual EDID code Reading & Writing Use

Programmer Overview

1.1 Performance Introduction

Carefully built low-cost professional programmer, high-density chip production process, a

unified user interface, easy to use, functional integrity, application software, reliable

operation, code small, faster execution. supported operating system:

WINXP WIN2003 WIN2008 VISTA WIN7 WIN8 WIN10 32-bit or 64-bit operating system

? The programming speed is greatly improved. It is suitable for small batch production and supports 4 programmers for one computer.

? A wide range of chip support, the initial version supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test, 54/74 and CMOS4000 integrated circuit integrated functional test.

Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits.

25 series Nor Flash capacity support to 512Mbits.

? Pin contact check function, poor contact pin can pinpoint

? Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming

without external power integrated programmer. Portable performance super: the world's smallest volume, size 10CM * 6CM * 2.5CM, only the size of the driver's license.

? Programmable VCC from 1.8V to 6.5V, VPP from 1.8V to 18V chip

? Chip serial number secondary development functions: Programmer built a variety of commonly used automatic numbering function. And can use a custom algorithm to achieve any sequence number through DLL dynamic library. This feature allows you to produce

a unique identification info rmation for each chip in mass production. The logo can also be encrypted with a custom algorithm to more effectively protect your product's rights.

? Universal serial programming interface ICSP (to support both high-voltage parallel programming and low-volt age serial programming). Note: ICSP now supports 24-Series 25 Series 93 Series Serial Integrated Circuits, ATMEL89S51,52, AVR ATMEGAxxx Full

Series, and MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx Full Series, and the new series of SYNCMOS SM59Dxx SM59Rxx fu ll range chips for in-circuit serial programming.

? Powerful 54 / 74F / LS / HC CMOS4000 Series Integrated Functionality Tests: The First Development Programmer to Test Common Logic ICs True, Test Errors Locating Logic Gate Circuits, Test Arbitrary Possible input combinations.

1.2 Programmer chip support range

? Variety of 26 27 28 29 37 39 49 50 series of parallel ROM, EPROM, EEPROM

Fast, full support. Support TSOP32 TSOP40 TSOP48 chips to 64MBits, will join the TSOP56 pin support.

(TL866II programming voltage VPP only supports up to 18V, for early 27C series ROM, the

chip with 21V 25V VPP voltage no longer supports writing, but can be read. If it is used,

the VPP with the same type of programming voltage can be used as 13V or 12V chip replacement, for example: 27C32 21V or 13V Vpp chip,Pay attention to the VPP voltage)

? 24 25 35 45 85 93 95 Series Serial EEPROM

Serial Series Chip Support Full, Supports Chip Capacity 25 Series 8 or 16PIN to 512MBits (64M Bytes)

? NAND FLASH chip supports up to 8Gbits

? MCU series, hundreds of models of 51 series of microcomputer

? AVR microcontroller package scratch ATMEGA series ATtiny series AT90XXX series of microcontrollers, all AVR ATMEGAxxx chip also supports the ICSP interface for SPI serial download programming. Support AVR one-to-one soft-key with RC correction byte.

? MICROCHIP PIC10 PIC12 PIC16 PIC18 Series Microcontroller:

PIC series of more than 300 models, more than 900 package chip support, currently supports

one of the most complete PIC chip integrated programmer. For vario

us types of PIC monolithic, in strict accordance with the manufacturer's manual requirements, the optimal programming, programming speed is excellent. The vast majority of chips support both ISCP online programming and programming through programming sockets.

? GAL programmable logic device programming

? SRAM test

Support for common 24 61 62 DS12 series SRAM test, respectively, to data line testing,

address line testing, memory unit incremental testing and unit testing.

? Super performance 54 / 74F / LS / HC CMO

S4000 series integrated circuit integrated

Function test:

The first development-type programmer to really test common logic ICs to test for errors

that can be located to logic gates, and to test any possible combinations of inputs in an integrated circuit when testing.

Packing List:

1 * XGecu T56 universal programmer.

1 * BGA48 Adapter(LFBGA48, 8*6mm, spacing 0.8mm)

1 * BGA63 Adapter(11*9mm)

1 * XG-ADP-BGA64A-1.0 Adapter(11*13mm,10*13mm,10*15mm)

1 * BGA169 Adapter(11.5*13mm,11*10mm,12*16mm,14*18mm)

1 * TSOP56/48/40/32 Adapter

1 * ADP-SSO-056-0.8 Adapter

1 * LCD LED screen EDID Cable

CH001384

Chipsetpro.com

Chipsetpro.com

€395.34

XGecu T56 Universal Programmer + 6 Adapters EDID code

XGecu T56 Universal Programmer Support NANDEMMCMCUISP

XGecu T56 Universal Programmer Support NAND/EMMC/MCU/ISP

Login to Download: Download software Device Support List instruction manual

Programmer Overview

1.1 Performance Introduction

Carefully built low-cost professional programmer, high-density chip production process, a

unified user interface, easy to use, functional integrity, application software, reliable

operation, code small, faster execution. supported operating system:

WINXP WIN2003 WIN2008 VISTA WIN7 WIN8 WIN10 32-bit or 64-bit operating system

? The programming speed is greatly improved. It is suitable for small batch production and supports 4 programmers for one computer.

? A wide range of chip support, the initial version supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test, 54/74 and CMOS4000 integrated circuit integrated functional test.

Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits.

25 series Nor Flash capacity support to 512Mbits.

? Pin contact check function, poor contact pin can pinpoint

? Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming

without external power integrated programmer. Portable performance super: the world's smallest volume, size 10CM * 6CM * 2.5CM, only the size of the driver's license.

? Programmable VCC from 1.8V to 6.5V, VPP from 1.8V to 18V chip

? Chip serial number secondary development functions: Programmer built a variety of commonly used automatic numbering function. And can use a custom algorithm to achieve any sequence number through DLL dynamic library. This feature allows you to produce

a unique identification info rmation for each chip in mass production. The logo can also be encrypted with a custom algorithm to more effectively protect your product's rights.

? Universal serial programming interface ICSP (to support both high-voltage parallel programming and low-volt age serial programming). Note: ICSP now supports 24-Series 25 Series 93 Series Serial Integrated Circuits, ATMEL89S51,52, AVR ATMEGAxxx Full

Series, and MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx Full Series, and the new series of SYNCMOS SM59Dxx SM59Rxx fu ll range chips for in-circuit serial programming.

? Powerful 54 / 74F / LS / HC CMOS4000 Series Integrated Functionality Tests: The First Development Programmer to Test Common Logic ICs True, Test Errors Locating Logic Gate Circuits, Test Arbitrary Possible input combinations.

1.2 Programmer chip support range

? Variety of 26 27 28 29 37 39 49 50 series of parallel ROM, EPROM, EEPROM

Fast, full support. Support TSOP32 TSOP40 TSOP48 chips to 64MBits, will join the TSOP56 pin support.

(TL866II programming voltage VPP only supports up to 18V, for early 27C series ROM, the

chip with 21V 25V VPP voltage no longer supports writing, but can be read. If it is used,

the VPP with the same type of programming voltage can be used as 13V or 12V chip replacement, for example: 27C32 21V or 13V Vpp chip,Pay attention to the VPP voltage)

? 24 25 35 45 85 93 95 Series Serial EEPROM

Serial Series Chip Support Full, Supports Chip Capacity 25 Series 8 or 16PIN to 512MBits (64M Bytes)

? NAND FLASH chip supports up to 8Gbits

? MCU series, hundreds of models of 51 series of microcomputer

? AVR microcontroller package scratch ATMEGA series ATtiny series AT90XXX series of microcontrollers, all AVR ATMEGAxxx chip also supports the ICSP interface for SPI serial download programming. Support AVR one-to-one soft-key with RC correction byte.

? MICROCHIP PIC10 PIC12 PIC16 PIC18 Series Microcontroller:

PIC series of more than 300 models, more than 900 package chip support, currently supports

one of the most complete PIC chip integrated programmer. For vario

us types of PIC monolithic, in strict accordance with the manufacturer's manual requirements, the optimal programming, programming speed is excellent. The vast majority of chips support both ISCP online programming and programming through programming sockets.

? GAL programmable logic device programming

? SRAM test

Support for common 24 61 62 DS12 series SRAM test, respectively, to data line testing,

address line testing, memory unit incremental testing and unit testing.

? Super performance 54 / 74F / LS / HC CMO

S4000 series integrated circuit integrated

Function test:

The first development-type programmer to really test common logic ICs to test for errors

that can be located to logic gates, and to test any possible combinations of inputs in an integrated circuit when testing.

CH001701

Chipsetpro.com

Chipsetpro.com

€159.13

XGecu T56 Universal Programmer Support NAND/EMMC/MCU/ISP

XILINX Platform USB Download Cable Jtag Programmer for FPGA CPLD CMod XC2C64A D

Login to Download: * User manual

Feature:

1. Support all Xilinx devices:

All Virtex FPGA families;

All Spartan FPGA families;

XC9500/XC9500XL/XC9500XV CPLDs;

CoolRunner XPLA3/CoolRunner-II CPLDs;

XC18V00 IPS Proms;

XCF00S/XCF00P Platform Flash PROMS;

XC4000 series FPGAs.

2. Supported on Windows and Red Hat Enterprise Linux.

3. Work with impact,chipscope pro and microblaze embedded processer debugging.

4. Support target system using 5.0V TTL,3.3V LVTTL/LVCMOS,2.5V,1.8V,1.5V.

5. Apply to Xilinx CPLD/FPGA chips download debugging.

6. Support JTAG,Slave Serial,SPI download mode,can configure all Xilinx devices.

7. Xilinx Platform with USB Cable fully compatible.

8. Target device to download the clock options,up to 24MHz.

9. Support Impact and ChipScope.

10. Firmware can be updated automatically.

Package included:

1 x Xilinx Platform Cable USB

1 x 10-pin 2.54mm pitch 15cm flat cable

1 x 14-pin 2.0mm pitch 15cm flat cable

1 x 14-pin 2.54mm pitch 15cm flat cable

1 x 7-pin fly duppont cables

1 x Adapter plate

1 x 6-pin cable

1 x USB Cable

CH001109

Chipsetpro.com

Chipsetpro.com

€24.74

XILINX Platform USB Download Cable Jtag Programmer for FPGA CPLD C-Mod XC2C64A D

XPOWERS AXP192

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH002090

Chipsetpro.com

Chipsetpro.com

€3.45

X-POWERS AXP192

XPOWERS AXP193

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH000511

Chipsetpro.com

Chipsetpro.com

€3.45

X-POWERS AXP193

XPOWERS AXP199

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH002605

Chipsetpro.com

Chipsetpro.com

€3.45

X-POWERS AXP199

XPOWERS AXP202

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH003930

Chipsetpro.com

Chipsetpro.com

€3.45

X-POWERS AXP202

XPOWERS AXP209

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH002891

Chipsetpro.com

Chipsetpro.com

€3.45

X-POWERS AXP209

XPOWERS AXP221

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

CH002824

Chipsetpro.com

Chipsetpro.com

€3.45

X-POWERS AXP221

XPROG Box ECU Programmer XPROGM V612 with USB Dongle

Latest Released Xprog V6.12 ELDB Add more function XPROG-M ECU Programmer With USB Dongle

Software V6.12 Firmware V5.4

Top 5 Reasons to Get Newest XPROGV6.12:

New Generation Hardware, runs more steady and faster than oldversion.

Latest software version: V6.12 ,Firmware V5.4

Language: English

Operating system: WinXP/Win7/Win8

Add More Authoirzation than old version:

Add new authorization:

AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9

AUTH-0028-3 Renesas RL78Authorized and AUTH-0028-4 Renesas M32C Authorized(New Add)

XPROG V6.12 using tips:

1.XPROG V6.12 dongle isn't compatible with older version Xprog. You are not allowed to update from the older version Xprog V5.55 V5.60 V5.70 V5.84 to this newest V6.12 XPROG-M Dongle.

2. Please Close all anti-virus software in your computer, becaUse the anti-virus software will kill Xprog V6.12 driver and software.

3. Disconnect internet. Or V6.12 XPROG-M hardware may be damaged .

4. Uninstall all the old version XPROG software before you install V6.12 software, because XPROG V6.12 hardware is not compatible with other version XPROG software. Otherwise the hardware will be damaged and its warranty will be invalid.

5. Never try to UPDATE it, the hardware will be damaged if you try to update it online. Warranty will be invalid

Install Notice:

Please windows system required as below:

1.Windows system should be windows XP 32bit OR windows 7 64 bit, all the patchsoftware for the windows system should be installed already and the windowsproperly works well...

2.The windows system should be with at lest 2 partitions (except the CD ROM.)

3.Can not be working with virtual harddisk.

Install Steps Manual:

1.Click the file "installation.reg", get the file information to theregedit.

2.Install the file "AdbeRdr11000_zh_CN.exe", it is a must, otherwisethe Xprog software will not start.

3.Plug the Xprog main interface to the computer, install the USB driver.

4.Copy the folder "XPROG-BOX6.12" to the desktop, and open it, and runthe "xprogdesktop.exe", then software open.

XPROG V6.12 Authorizations:

AUTH-0001Motorola HC05 family authorization (allows to read/write EEPROM)

AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)

AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)

AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROMand flash memory)

AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows toread/write EEPROM)

AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization(allows to read/write secured EEPROM and flash memory)

AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.

AUTH-0008 BMW EWS3 authorization

AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flashmemory)

AUTH-0010 MB ZGS001 authorization

AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypasssecurity bit and read EEPROM and RAM memory)

AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)

AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)

AUTH-0015 MPC5xx authorization (depending on device program automaticallydetects MPC5xx, M95xxx device type, flash, external flash and configurationmemory size)

AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization(allows to read/write secured EEPROM and flash memory)

AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/writeinternal flash and external serial EEPROM)

AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows toread/write secured and non-secured internal flash and external serial EEPROM,view ange mileage, Chassis number (VIN), serial number and PIN code).

AUTH-0023-1 MAC7xxx

AUTH-0023-2 XC23xx

AUTH-0024-1 MC9S12Cxx

AUTH-0024-2 MC9S12XE

AUTH-0024-3 9S12XE SECURITY

AUTH-0024-4 MC9S12HA/HY/P

AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13

AUTH-0027-1HC(S)908 update Authorized 2016/3/13

AUTH-0027-2HC(S)908 sercurity Authorized 2016/3/13

AUTH-0028-1Renesas V850 Authorized 2017/10/9

AUTH-0028-2Renesas SuperH Authorized 2017/10/9

AUTH-0028-3Renesas RL78 Authorized ---New!

AUTH-0028-4Renesas M32C Authorized ---New!

XPROG-M V6.12 Adapters Newly Added:

ADP-0019 Rev.B ----New!

ADP-0006 M35080 ICP adapter ---New!

QFP64 MC908AZ/AS60 3K85K adapter ---New!

QO18S714 ---New!

XPROG-M V6.12 Adapters included:

ADP-0001 TMS370 PLCC28 programming adapter

ADP-0002 TMS370 PLCC44 programming adapter

ADP-0003 TMS370 PLCC68 programming adapter

ADP-0004 Motorola HC05B/X PLCC52 programming adapter

ADP-0005 Motorola HC05B/X QFP64 programming adapter

ADP-0006 ST M35080 in-circuit programming adapter

ADP-0008 TMS374 family in-circuit programming adapter

ADP-0009 MC68HC05V12 programming adapter

ADP-0010 TMS374 on-board programming adapter

ADP-0011 HC11EA9/E9 programming adapter

ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass securityadapter

Additional adaptor for 5M48H P-FlashADP-0019Rev.A

EWS3 adaptor

EEPROM adaptor

QFP28 adaptor

QFP64 adaptor

QFP80 adaptor

QFP112 adaptor

QFP144 adaptor

Package List:

1pc x XPROG-Box Hardware (Aluminum Enclosure)

19pc x Adapters Set

1pc x USB Cable

1pc x 16Pin cable

1pc x CD with XPROG-Box Software (V6.12)

CH003946

Chipsetpro.com

Chipsetpro.com

€185.24

X-PROG Box ECU Programmer XPROG-M V6.12 with USB Dongle

YAOGONG 8878D 2in1 REWORK STATION

Buy Tweezers Set: * IC Chip Extractor Rework Tweezer Tool

Description :

Model 8878D series portable microcomputer hot air gun, it is our company new design type.

Which are applicable to repair SMT electronic products, portable soldering tool.

This product uses the long life far infrared heating .element and the special temperature components.

And the precision microcomputer control of hot runner technology, make the gun temperature control curve fully conform to the requirements of the SMT production process of soldering.

The soldering iron adopts a long life 1321 white core, and the precise PID temperature control technology makes the temperature error of the soldering iron small, and the work is stable and reliable.

At the same time, the functions of air gun manual and automatic, soldering iron sleep and temperature compensation are increased.

Make the products with energy saving, small size, convenient, long-life, security and so on.

Specification :

Air gun Soldering iron

Operating frequency 50-60Hz 50-60Hz

Operating voltage AC110V10%/AC220V10% AC110V10%/AC220V10%

Adjustable temperature 100-480? 200-480?

Adjustable pressure 1-10

Storage humidity 35%-45% 35%-45%

Manual/automatic function Yes No

Compensation temperature -99? to 99? -99? to 99?

Sleeping time 0-99minutes

Rated power 700W 200W

Machine size(mm) 128*70*31

Net weight 1.2KG

Instructions :

1. When the power is connected, the buzzer will ring, indicating that the power is initialized.

2. Turn on the air gun, shor t press the air gun switch, the air gun is turned on.

3. Turn on the soldering iron, shor t press the soldering iron switch, the soldering iron is turned on.

4. Set the temperature of the air gun, shor t press the "*" button until the number of the air gun display screen is the first time to flash. Press the "?" or "?" button to set the temperature needed for the air gun.

5. Set the air volume of the air gun, shor t press the "* " button until the number of the air gun display screen is second time to flash. When the air gun display screen displays "F" and air volume number, press the "?" or "?" button to set the air volume needed for the air gun.

6. Set the air gun manual / automatic function, shor t press the "* " button until the number of the air gun display screen is third time to flash. When the display screen displays "A (automatic)" or "H (manual)", press the "?" or "?" button to choose the air gun manual / automatic function; When it is in automatic state, the air gun will automatically cool down on the bracket, and will stop working when the temperature is less than 100 ?. When it is in manual state, the air gun will not cool down on the bracket, and will still work normally.

7. Set the air gun compensation temperature, long press the "* " button, then the air gun display screen and the soldering iron display screen will display the respective compensation temperature numbers, then shor t press the "* " button until the air gun display screen numbers is flash, press the "?" or "?" button to set the compensation temperature needed for the air gun.

8. Turn off the air gun, long press the air gun switch, the air gun is turned off.

9. Set the temperature of the soldering iron, shor t press the "* " button until the number of the soldering iron display screen is the first time to flash. Press the "?" or "?" button to set the temperature needed for the soldering iron.

10. Set the sleeping time of the soldering iron, shor t press the "* " button until the number of the soldering iron display screen is the second time to flash. When the soldering iron display screen displays "S" and sleeping time, press the "?" or "?" button to set the sleeping time needed for the soldering iron. The sleeping time of the soldering iron can be set between 0 and 99 minutes. Be careful, when the sleeping time is "00", the solding iron will keep working and not sleep.

11. Set the compensation temperature of the soldering iron, long press the "* " button until the air gun and soldering iron display screen display the respective compensation temperature numbers, then shor t press the "* " button until the soldering iron display screen number is flash. Press the "?" or "?" button to set the compensation temperature needed for the soldering iron.

12. Turn off the soldering iron, long press the soldering iron switch, the soldering iron is turned off.

Note: After entering the setup mode, the machine will automatically exit the setup mode without any key for 5 seconds.

Package includeds :

1 x 8878D 2-in-1 Rework Station

1 x Hot Air Gun with Station

1 x Soldering Iron with Station

3 x Nozzle

CH003093

Chipsetpro.com

Chipsetpro.com

€60.92

YAOGONG 8878D 2in1 REWORK STATION