ADPSSO05608 For XGecu T56 Programmer
ADP-SSO-056-0.8 For XGecu T56 Programmer
Latest Released Xprog V6.12 ELDB Add more function XPROG-M ECU Programmer With USB Dongle
Software V6.12 Firmware V5.4
Top 5 Reasons to Get Newest XPROGV6.12:
New Generation Hardware, runs more steady and faster than oldversion.
Latest software version: V6.12 ,Firmware V5.4
Language: English
Operating system: WinXP/Win7/Win8
Add More Authoirzation than old version:
Add new authorization:
AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9
AUTH-0028-3 Renesas RL78Authorized and AUTH-0028-4 Renesas M32C Authorized(New Add)
XPROG V6.12 using tips:
1.XPROG V6.12 dongle isn't compatible with older version Xprog. You are not allowed to update from the older version Xprog V5.55 V5.60 V5.70 V5.84 to this newest V6.12 XPROG-M Dongle.
2. Please Close all anti-virus software in your computer, becaUse the anti-virus software will kill Xprog V6.12 driver and software.
3. Disconnect internet. Or V6.12 XPROG-M hardware may be damaged .
4. Uninstall all the old version XPROG software before you install V6.12 software, because XPROG V6.12 hardware is not compatible with other version XPROG software. Otherwise the hardware will be damaged and its warranty will be invalid.
5. Never try to UPDATE it, the hardware will be damaged if you try to update it online. Warranty will be invalid
Install Notice:
Please windows system required as below:
1.Windows system should be windows XP 32bit OR windows 7 64 bit, all the patchsoftware for the windows system should be installed already and the windowsproperly works well...
2.The windows system should be with at lest 2 partitions (except the CD ROM.)
3.Can not be working with virtual harddisk.
Install Steps Manual:
1.Click the file "installation.reg", get the file information to theregedit.
2.Install the file "AdbeRdr11000_zh_CN.exe", it is a must, otherwisethe Xprog software will not start.
3.Plug the Xprog main interface to the computer, install the USB driver.
4.Copy the folder "XPROG-BOX6.12" to the desktop, and open it, and runthe "xprogdesktop.exe", then software open.
XPROG V6.12 Authorizations:
AUTH-0001Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROMand flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows toread/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization(allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flashmemory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypasssecurity bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automaticallydetects MPC5xx, M95xxx device type, flash, external flash and configurationmemory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization(allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/writeinternal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows toread/write secured and non-secured internal flash and external serial EEPROM,view ange mileage, Chassis number (VIN), serial number and PIN code).
AUTH-0023-1 MAC7xxx
AUTH-0023-2 XC23xx
AUTH-0024-1 MC9S12Cxx
AUTH-0024-2 MC9S12XE
AUTH-0024-3 9S12XE SECURITY
AUTH-0024-4 MC9S12HA/HY/P
AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13
AUTH-0027-1HC(S)908 update Authorized 2016/3/13
AUTH-0027-2HC(S)908 sercurity Authorized 2016/3/13
AUTH-0028-1Renesas V850 Authorized 2017/10/9
AUTH-0028-2Renesas SuperH Authorized 2017/10/9
AUTH-0028-3Renesas RL78 Authorized ---New!
AUTH-0028-4Renesas M32C Authorized ---New!
XPROG-M V6.12 Adapters Newly Added:
ADP-0019 Rev.B ----New!
ADP-0006 M35080 ICP adapter ---New!
QFP64 MC908AZ/AS60 3K85K adapter ---New!
QO18S714 ---New!
XPROG-M V6.12 Adapters included:
ADP-0001 TMS370 PLCC28 programming adapter
ADP-0002 TMS370 PLCC44 programming adapter
ADP-0003 TMS370 PLCC68 programming adapter
ADP-0004 Motorola HC05B/X PLCC52 programming adapter
ADP-0005 Motorola HC05B/X QFP64 programming adapter
ADP-0006 ST M35080 in-circuit programming adapter
ADP-0008 TMS374 family in-circuit programming adapter
ADP-0009 MC68HC05V12 programming adapter
ADP-0010 TMS374 on-board programming adapter
ADP-0011 HC11EA9/E9 programming adapter
ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass securityadapter
Additional adaptor for 5M48H P-FlashADP-0019Rev.A
EWS3 adaptor
EEPROM adaptor
QFP28 adaptor
QFP64 adaptor
QFP80 adaptor
QFP112 adaptor
QFP144 adaptor
Package List:
1pc x XPROG-Box Hardware (Aluminum Enclosure)
19pc x Adapters Set
1pc x USB Cable
1pc x 16Pin cable
1pc x CD with XPROG-Box Software (V6.12)
No customer reviews for the moment.
ADP-SSO-056-0.8 For XGecu T56 Programmer
40 pin Lock clasp Programmer for TOP2013 SoFi SP16
GX5260 Adapter for XELTEK SuperPro 7500
4pcs Limit Frame for eMMC FBGA169/BGA153 Adapter 11.5*13 to SD
PLCC44 Adapter for PLCC44-DIP40 turn programmer test IC adapter for USB programmer universal
CX3043 Adapter for XELTEK SuperPro SP5000/6000/7000
EZP_XPro Programmer USB motherboard routing LCD BIOS SPI FLA Adapter Socket
XELTEK SuperPro 610P Universal Programmer with 48 Universal Pin-drivers + 45 Adapters ISP EDID code
DX1029 Adapter for XELTEK SuperPro 6100N
DX3018 Adapter for XELTEK SuperPro 6100N
TSOP32-40-48 Programmer Adapter TSOP-48-0.5-OTS048 Socket for TL866
DX1045 Adapter for XELTEK SuperPro 6100N
TSOP56/48/40/32 Adapter For XGecu T56 Programmer
TQFP44 to DIP44 Programmer Adapter Socket for RT809H TNM5000 T56 programmer
OTS-20-1.27-01 Programmer Adapter SOP8-DIP8 Socket (200mil)