The use of programmer selftest command,to check if there is problem itself.
Selftest way I:
Step 1 : Input the SELFTEST in the Enter chip printing,click
Step 2 : Click ,look at the hint in the display area,selftest 0 means the test pass;
Step 3 : Install the NO.1 test board and the short port of VGA ISP(short circuit the 4pins and 11pins,12pins and 15pins);
Step 4 : Click ,check the hint in the software,it will hint Selftest 1,test pass;
Step 5 : Install the NO.2 Self Test Board;
Step 6 : Click ,check the hint in the software,it will hint Selftest 2, test pass;
Selftest way II :
Step 1 : When there is no chip on the locking seat,input the type of 25XX in Enter Chip Printing;
Step 2 : Click ,it will hint that there is no chip or the locking seat hasnt been impacted well,which is normal;
If it hints that there may be a pin empty solder;
Attention : In the case of that some users have no test board,as long as the selftest 0 and 25 chip test pass,the machine is normal.
If there is other hints when doing selftest 0,the way to deal with it could be as following:
The problem of connection with computer and the programmer,please step-by examine according to the hint of failure process;
Hardware trouble like pin electric leakage,problems inside the pins,VPP open circuit,GND open circuit,VPP short circuit,VCC short circuit,GND short circuit,VPP protection not shut off,which must be returned to factory to repair.
No customer reviews for the moment.
EZP2013 USB Programmer SPI 24 25 93 EEPROM Flash Bios win8 32/64bit and Adapter Socket
IC Chip Extractor Motherboard Circuit Board Component Puller Tool
Universal IC Socket Adapter SSOP28 TO DIP28 / SSOP20 TO DIP20 / SSOP16 TO DIP16 (220mil)
DX5146 Adapter for XELTEK SuperPro 6100N
OTS-16-03 Programmer Adapter SOP16-DIP16 Socket (150mil)
DX0032 Adapter for XELTEK SuperPro 6100N
DX4018 Adapter for XELTEK SuperPro 6100N
XELTEK SuperPro 6100N Universal IC Chip Device Programmer NEWEST version + 28 Adapters EDID code
ADP-SSO-056-0.8 For XGecu T56 Programmer
RT809H PEB-1 Extension Board IT8985E IT8595E IT8587E IT8586E IT8585E IT8580E IT8386E Transfer Board
Newest XPROG-M V5.5.5 X-PROG M BOX V5.55 ECU Programmer Especially for BMW CAS4 Decryption
Orange5 Professional Programming Device With Full Packet Hardware
BGA24 to DIP8 Adapters for RT809H RT809F TL866CS TL866A TL866II EZP2010 EZP2013 Sofi
OBDSTAR X300 DP Plus X300 PAD2 8inch Tablet (Full package) C Package
VGA to HDMI line is suitable for RT809H RT809F to solve the problem of printing and brushing in HDMI port
XELTEK SuperPro 610P Universal Programmer with 28 Adapter EDID code
RT-SelfTestBoard-1 RT-SelfTestBoard-2 for RT809H programmer
