DX2052 Adapter for XELTEK SuperPro 6100N

STX-RLINK is adapted for the St series MCU a versatile Tools for Economic Development. It can be downloaded on line simulation and St stm8, ST7, STM32, str7 and str9 Family of devices.

Software supported

The direct support of ride7 raisonance and rflasher7.

Official St IDE (Integrated Development Environment software) ST (STVD) visual Development and visual recording software program (St stvp).

Compatible Devices

Swim interface with support for all the stm8 MCU

Supports all ST7 MCU interface with ICC

With JTAG interface supports all str7 / SWD STM32 MCU, and str9

Functionality, performance

Functions of programming: The Programming of Flash ROM, EEPROM, etc.

The Simulation Capabilities: support to run at full speed, stepping, breakpoints, and another method of Cleansing, you can see the State of the variable Data, etc.

Simulation of Performance debugging Simulation: USB2.0 interface, Step by step, breakpoints, Rapid Response!

Program Performance: USB2.0 interface to swim / ICC / / SWD JTAG download, download speed!

Special Note: STX RLINK can't Trace. Original explained as follows:

The RLINK includes no support for Tracing devices based on arm kernel and Trace macrocell with Embedded System such as str9. With the capacity of monitoring tools are available in the str9 Professional Developer Kit (DK / raisonance str9 - Signum jtagjet RAIS), and in the str91x Advanced Developer's kit (IAR str91xdk / IAR) with J Trace.

Using the USB Interface to connect the PC

STX RLINK Integrated Development Tools, drivers, USB high speed communication.

Upgradeable firmware

In the Future, will launch more St stm8, ST7, STM32, str7 and str9 Models, the new device is added to the list of compatible devices and ride7 STVD Model, when you need to use in the future development of new models, and updates ride7 STVD, Firmware Update, should be supported by new models

Package Contains:

STX RLINK x 1

USB type B type cable x 1

Swim cable x 1

ICC / 4 - pin Adapter Adapter x 1 swim

JTAG Adapter x 1

SWD 20 pin JTAG - x 1

Does not contain CD software program

CHIP PROGRAMMER SOCKET TQFP44 TO DIP44 adapter socket support ATMEGA8 series

Description:

Best quality, QFP44 to 44Dip Adapter

Suitable for QFP44 IC

patch size : 0.8mm 10mm * 10mm

Feature:

Support Atmel Atmega TQFP44 device

eg.mega328 mega8A mega48 mega8 mega88 mega16 mega162 mega168

Comes with AVRISP header, directly connect to AVRISP, USBASP, MkII, for direct burning of firmware or arduino bootloaders

Crysal header so that crystal can be replaced easily

Convert to DIP44 Atmega328 format, Pin to pin comptabile with Atmega DIP44 MCU format

Package included:

Programmer Adapter QFP44 to DIP44

Note:

Type A: Use for XELTEK USB Programmer - Overlapping

Type B: Use for RT809H TNM5000 Programmer - Pin to Pin

DX3065 Adapter for XELTEK SuperPro 6100N

Model: CX3043/EX3043

Package type: TQFP100

Spacing: 0.50mm

Chip size: 14*14

DX1002 Adapter for XELTEK SuperPro 6100N

Login to Download: Download software

Product Description:

Software and firmware update.

Surpport 25 FLASH, 24 EEPROM, 25 EEPROM, 93 EEPROM,etc.

Small shape. small size and weight light and low power loss.

Working with Windows 2000, Windows XP, Windows Vista, Windows 7(32bit).

USB 2.0 interface, the speed is 12Mbps.

The speed of reading and writing is very fast.

Auto select power votage.

Auto detect chip modles.

Auto off-line chip copy.

Read and Write the bios chips of DVD,TV,PC,harddisk,etc.

Package includes:

1* EZP2010 Programmer

1* USB2.0 12Mbps Interface

1* CD with PDF file and install file

1* Off-line 5V USB Power Supply

1* 150mil SOP8 to DIP8 Socket

1* 200-208mil SOP8 to DIP8 Socket

1* SOP16-DIP8 (300mil)

2* Simple SMD PIN8 DIP

1* 1.8V Conversion adapter

TL866II PLUS Programmer can use for items list:

Login to Download: Download software Device Support List instruction manual

Programmer Overview

1.1 Performance Introduction

Carefully built low-cost professional programmer, high-density chip production process, a

unified user interface, easy to use, functional integrity, application software, reliable

operation, code small, faster execution. supported operating system:

WINXP WIN2003 WIN2008 VISTA WIN7 WIN8 WIN10 32-bit or 64-bit operating system

? The programming speed is greatly improved. It is suitable for small batch production and supports 4 programmers for one computer.

? A wide range of chip support, the initial version supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test, 54/74 and CMOS4000 integrated circuit integrated functional test.

Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits.

25 series Nor Flash capacity support to 512Mbits.

? Pin contact check function, poor contact pin can pinpoint

? Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming

without external power integrated programmer. Portable performance super: the world's smallest volume, size 10CM * 6CM * 2.5CM, only the size of the driver's license.

? Programmable VCC from 1.8V to 6.5V, VPP from 1.8V to 18V chip

? Chip serial number secondary development functions: Programmer built a variety of commonly used automatic numbering function. And can use a custom algorithm to achieve any sequence number through DLL dynamic library. This feature allows you to produce

a unique identification info rmation for each chip in mass production. The logo can also be encrypted with a custom algorithm to more effectively protect your product's rights.

? Universal serial programming interface ICSP (to support both high-voltage parallel programming and low-volt age serial programming). Note: ICSP now supports 24-Series 25 Series 93 Series Serial Integrated Circuits, ATMEL89S51,52, AVR ATMEGAxxx Full

Series, and MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx Full Series, and the new series of SYNCMOS SM59Dxx SM59Rxx fu ll range chips for in-circuit serial programming.

? Powerful 54 / 74F / LS / HC CMOS4000 Series Integrated Functionality Tests: The First Development Programmer to Test Common Logic ICs True, Test Errors Locating Logic Gate Circuits, Test Arbitrary Possible input combinations.

1.2 Programmer chip support range

? Variety of 26 27 28 29 37 39 49 50 series of parallel ROM, EPROM, EEPROM

Fast, full support. Support TSOP32 TSOP40 TSOP48 chips to 64MBits, will join the TSOP56 pin support.

(TL866II programming voltage VPP only supports up to 18V, for early 27C series ROM, the

chip with 21V 25V VPP voltage no longer supports writing, but can be read. If it is used,

the VPP with the same type of programming voltage can be used as 13V or 12V chip replacement, for example: 27C32 21V or 13V Vpp chip,Pay attention to the VPP voltage)

? 24 25 35 45 85 93 95 Series Serial EEPROM

Serial Series Chip Support Full, Supports Chip Capacity 25 Series 8 or 16PIN to 512MBits (64M Bytes)

? NAND FLASH chip supports up to 8Gbits

? MCU series, hundreds of models of 51 series of microcomputer

? AVR microcontroller package scratch ATMEGA series ATtiny series AT90XXX series of microcontrollers, all AVR ATMEGAxxx chip also supports the ICSP interface for SPI serial download programming. Support AVR one-to-one soft-key with RC correction byte.

? MICROCHIP PIC10 PIC12 PIC16 PIC18 Series Microcontroller:

PIC series of more than 300 models, more than 900 package chip support, currently supports

one of the most complete PIC chip integrated programmer. For vario

us types of PIC monolithic, in strict accordance with the manufacturer's manual requirements, the optimal programming, programming speed is excellent. The vast majority of chips support both ISCP online programming and programming through programming sockets.

? GAL programmable logic device programming

? SRAM test

Support for common 24 61 62 DS12 series SRAM test, respectively, to data line testing,

address line testing, memory unit incremental testing and unit testing.

? Super performance 54 / 74F / LS / HC CMO

S4000 series integrated circuit integrated

Function test:

The first development-type programmer to really test common logic ICs to test for errors

that can be located to logic gates, and to test any possible combinations of inputs in an integrated circuit when testing.

PLCC44 Adapter for PLCC44-DIP44 turn programmer test IC adapter for USB programmer universal

DX1032 for XELTEK SuperPro 6100N

DX1045 Adapter for XELTEK SuperPro 6100N

Default configuration:

13*10.5mm