DX3015 Adapter for XELTEK SuperPro 6100N

XGecu T56 Universal Programmer Support NAND/EMMC/MCU/ISP

Login to Download: Download software Device Support List instruction manual EDID code Reading & Writing Use

Programmer Overview

1.1 Performance Introduction

Carefully built low-cost professional programmer, high-density chip production process, a

unified user interface, easy to use, functional integrity, application software, reliable

operation, code small, faster execution. supported operating system:

WINXP WIN2003 WIN2008 VISTA WIN7 WIN8 WIN10 32-bit or 64-bit operating system

? The programming speed is greatly improved. It is suitable for small batch production and supports 4 programmers for one computer.

? A wide range of chip support, the initial version supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test, 54/74 and CMOS4000 integrated circuit integrated functional test.

Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits.

25 series Nor Flash capacity support to 512Mbits.

? Pin contact check function, poor contact pin can pinpoint

? Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming

without external power integrated programmer. Portable performance super: the world's smallest volume, size 10CM * 6CM * 2.5CM, only the size of the driver's license.

? Programmable VCC from 1.8V to 6.5V, VPP from 1.8V to 18V chip

? Chip serial number secondary development functions: Programmer built a variety of commonly used automatic numbering function. And can use a custom algorithm to achieve any sequence number through DLL dynamic library. This feature allows you to produce

a unique identification info rmation for each chip in mass production. The logo can also be encrypted with a custom algorithm to more effectively protect your product's rights.

? Universal serial programming interface ICSP (to support both high-voltage parallel programming and low-volt age serial programming). Note: ICSP now supports 24-Series 25 Series 93 Series Serial Integrated Circuits, ATMEL89S51,52, AVR ATMEGAxxx Full

Series, and MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx Full Series, and the new series of SYNCMOS SM59Dxx SM59Rxx fu ll range chips for in-circuit serial programming.

? Powerful 54 / 74F / LS / HC CMOS4000 Series Integrated Functionality Tests: The First Development Programmer to Test Common Logic ICs True, Test Errors Locating Logic Gate Circuits, Test Arbitrary Possible input combinations.

1.2 Programmer chip support range

? Variety of 26 27 28 29 37 39 49 50 series of parallel ROM, EPROM, EEPROM

Fast, full support. Support TSOP32 TSOP40 TSOP48 chips to 64MBits, will join the TSOP56 pin support.

(TL866II programming voltage VPP only supports up to 18V, for early 27C series ROM, the

chip with 21V 25V VPP voltage no longer supports writing, but can be read. If it is used,

the VPP with the same type of programming voltage can be used as 13V or 12V chip replacement, for example: 27C32 21V or 13V Vpp chip,Pay attention to the VPP voltage)

? 24 25 35 45 85 93 95 Series Serial EEPROM

Serial Series Chip Support Full, Supports Chip Capacity 25 Series 8 or 16PIN to 512MBits (64M Bytes)

? NAND FLASH chip supports up to 8Gbits

? MCU series, hundreds of models of 51 series of microcomputer

? AVR microcontroller package scratch ATMEGA series ATtiny series AT90XXX series of microcontrollers, all AVR ATMEGAxxx chip also supports the ICSP interface for SPI serial download programming. Support AVR one-to-one soft-key with RC correction byte.

? MICROCHIP PIC10 PIC12 PIC16 PIC18 Series Microcontroller:

PIC series of more than 300 models, more than 900 package chip support, currently supports

one of the most complete PIC chip integrated programmer. For vario

us types of PIC monolithic, in strict accordance with the manufacturer's manual requirements, the optimal programming, programming speed is excellent. The vast majority of chips support both ISCP online programming and programming through programming sockets.

? GAL programmable logic device programming

? SRAM test

Support for common 24 61 62 DS12 series SRAM test, respectively, to data line testing,

address line testing, memory unit incremental testing and unit testing.

? Super performance 54 / 74F / LS / HC CMO

S4000 series integrated circuit integrated

Function test:

The first development-type programmer to really test common logic ICs to test for errors

that can be located to logic gates, and to test any possible combinations of inputs in an integrated circuit when testing.

Packing List:

1 * XGecu T56 universal programmer.

1 * BGA48 Adapter(LFBGA48, 8*6mm, spacing 0.8mm)

1 * BGA63 Adapter(11*9mm)

1 * XG-ADP-BGA64A-1.0 Adapter(11*13mm,10*13mm,10*15mm)

1 * BGA169 Adapter(11.5*13mm,11*10mm,12*16mm,14*18mm)

1 * TSOP56/48/40/32 Adapter

1 * ADP-SSO-056-0.8 Adapter

1 * TQFP44-DIP44 Adapter

1 * TQFP32 QFP32/ LQFP32-DIP28 Adapter

1 * TSOP48 Adapter

1 * SOP44-DIP44 1.27mm (530mil) Adapter

1 * SOP28-DIP28 (300mil) Adapter

1 * SOP20-DIP20 (300mil) Adapter

1 * SOP16-DIP16 (300mil) Adapter

1 * Double SOP8-DIP16 CNV-SOP20 (208mil) Adapter

1 * SOP8-DIP8 CNV-SOP20 (208mil) Adapter

1 * SOP20-DIP20 CNV-SOP20 (208mil) Adapter

1 * SOP8-DIP8 CNV-SOP-DIP16 (150mil) Adapter

1 * SOP16-DIP16 CNV-SOP-DIP16 (150mil) Adapter

1 * PLCC44-DIP44

1 * PLCC44-DIP40

1 * PLCC32-DIP32

1 * PLCC28-DIP28

1 * PLCC28-DIP24

1 * PLCC20-DIP20

1 * SSOP28 to DIP28

1 * TSSOP8 to DIP8

1 * KB9012 board

1 * SOP8 IC Clip

1 * ITE 29/39/49/50 series 32/40/48 feet adapter

1 * Multipurpose ISP-DuPont-Header Adapter

1 * EC NPEC288 NPEC388 PCB Board

1 * TSOP28Pin 0.65mm Adapter Board

1 * SOP28Pin 1.27mm Adapter Board

1 * TSOP20Pin 0.65mm Adapter Board

1 * SOP20Pin 1.27mm Adapter Board

1 * TSOP16Pin 0.65mm Adapter Board

1 * SOP16Pin 1.27mm Adapter Board

1 * TSOP14Pin 0.65mm Adapter Board

1 * SOP14Pin 1.27mm Adapter Board

1 * TSOP10Pin 0.65mm Adapter Board

1 * SOP10Pin 1.27mm Adapter Board

1 * TSOP8Pin 0.65mm Adapter Board

1 * SOP8Pin 1.27mm Adapter Board

1 * QFN8-DIP8 Programador Adapter WSON8-DIP8 8x6mm 6x5mm

1 * SOP8/MSOP8/SSOP8/SOP16-DIP16 simple Adapter

1 * Adapter SOP8-DIP8 simples

1 * 1.8V Conversion Block 25 series low voltage chip adapter

1 * ICSP Cable

1 * LCD LED screen EDID Cable

1 * IC Chip Extractor

1 * Suction Pen

1 * USB Cable

1 * Anti-Static Wristband Wrist Strap Band ESD Discharge PC Electricity Grounding

QFN8 turn to DIP8(24pin) test seat Adapter Sockets

Pin spacing 1.27mm

The applicable chip size is 6*5MM

TNM5000 TSOP56 adapter Device support list

TSOP56 adapter Device support list

Login to Download: * items list Download

lease note: This adapter set is only for TNM5000 Programmer. Other programmers cannot use it!

Description:

This adapter set can be used for TSOP56 package chips. For All 56 Pins TSOP Type-1 (20mm Pin-Pin Lenght) , You Need Only one adaptor Model 556T2 , with different sets of bottom plates which can be easily exchanged by user.

The set comes with 1 TSOP56 ZIF board and 4 base boards, just like the pictures show.

Package include:

1pcs TNM TSOP56 ZIF Socket top board (made in Japan)

1pcs TNM TSOP561 bottom board

1pcs TNM TSOP562 bottom board

1pcs TNM TSOP563 base board

1pcs TNM TSOP564 base board

RT809H special seat LFBGA48-8X6 0.8 spacing

Applicable to set-top boxes commonly used MX29GL640, S29GL064N and other models of NOR flash offline reading and writing seat

Encapsulation is LFBGA48, 8*6mm, spacing 0.8mm

Product Description

Package includes:

1PCS X TSOP48 base Adapter

1PCS X TSOP32/40/48 base Adapter

1PCS X TSOP32 base board

1PCS X TSOP40A base board

1PCS X TSOP40B base board

Stock: in stock

Condition: NEW

TNM5000 Universal Programmer Introduction

Login to Download: * Programmer latest Software

User Manual Device List Nand Software Utility Software for RS232 & USB Bl a ster Emulation

? 23000 Supported Devices Flash Memory (Parallel / Nand /Serial) , EPROM , EEPROM , Serial EEPROM , Microcontroller , NVRAM , FRAM , CPLD , PLD , FPGA).

? 48-Pins ZIF Socket with Pin Continuity tester & 10-Pins ISP/JTAG Connector.

? USB 2.0 High Speed ,Program 1 Gbit Nand Flash less than 50 sec , Reading Serial Flash memory with 6 Mbit/Sec Speed.

? Auto detection of all flash Memories/Microcontrollers with Device ID.

? User friendly software for Windows XP/VISTA/7/8 (32,64 bits).

? Multiple Programming is possible by attaching 2 or more Programmers to one PC.

? Very low cost Main Unit & Low cost adaptors.

? Special Abilities like, Altera US,B-B.l*a*s.ter Emulation for Quartus Software, Serial Port Emulation , Vehicle ECU , Immoblizer & Dashboard microcontroller Support.

Parallel Flash Memories: up to 56 pins parallel flash memories are supported by TNM5000. it Supports different kind of packages (PLCC , TSOP1 , TSOP2 ,VSOP & ...).

All Flashes can be automatically detected by software in case of unreadable device names. By using a single adaptor for all 32-48 pins TSOP flashes , user only need 1 adaptor for over 2000 flash chips.

Nand Flash Memories: TNM5000 has an additional Nand+ software , specially designed for Nand flash memories. Nand+ Software has one of the most complete list of Nand flash Memories with algorithms for correction of bad data in MLC Nand Flashes. TNM5000 is one of the fastest Nand Programmers in the world with Read & Write Speed up to 8 MegaByte per Second. All Nand Flashes can be automatically detected by software in case of unreadable or remarked device names.

Serial Flash Memories: All 8-16 Pins Serial SPI flash memories are supported by TNM5000. All SPI flash Memories can be detected automatically by software in case of unreadable device names. It reads & programs SPi flashes with maximum safe speed on ZIF (6-7 Mbit/second) . Also it Unprotects the write protected flashes before writing data to it.

Microcontrollers:

ATMEL: All AVR 8 bits chips (ATMEGA/ATTINY/AT90S) are supported on ZIF Scocket & by ISP cable. High Voltage Parallel on ZIF Programming of AVR up to 64 pins is supported. newly introduced ATXMEGA Series are supported by both PDI & JTAG Method. Old C51 series & new single cycle C51 series are completely supported. All the above series can be detected automatically by TNM5000. ARM7 programming by JTAG is supported.

Microchip: One of the most complete device list for microchip PIC microcontrollers including all PIC12F /PIC12C /PIC16C / PIC16F / PIC18F / DPIC33F / J & K Series. Devices up to 40 Pins can be programmed on ZIF , All PICs can be detected automatically & programmed by ISP cable.

Others: ST, SST, Philips (NXP) , Motorola , Syncmos, Silicon Lab , ICSI , Infineon , Intel , Winbond & ...

Automotive MCUS: Supporting of ST10F & TMS370 Series by ISP cable for many BOSCH/VALEO/SAGEM ECUs (complete ST10F support of XPROG-m programmer device list). supporting of siemense & infineon SAK-C167 connected to 44 or 48 pins flash (Siemense/BOSCH/SAGEM S2000 ECU) like HSE FlasHit Programmer. Supporting NEC & Motorola Devices for Dashboards.

PLD/CPLD/FPGA: Supporting All ALTERA JTAG Devices by emulation of USB B l a s t e r Programmer in Quartus Software. Supporting of Xilinx CPLD/FPGA with jed file. Fast Xilinx FPGA configuration with bit file. Supporting of GAL/PALCE Devices with special option for PALCE unlocking.

Software: With multiple language support (English / Chinese / Russian /polska /Arabic / French /FARSI). More languages & Devices can be added by customer request. You Can Download Software & run it in Demo mode to evaluate it.

Package List:

1 x TNM5000 Programmer

1 x TSOP56 adapter set IC socket (5PCS)

1 x TSOP48 adapter set IC socket

1 x usb cable

1 x software CD

RT-BGA107-01 POS NAND MCP Adapter For RT809H Programmer

Model: 26347A_P24-180202

Spacing: 0.5mm

DX3068 Adapter for XELTEK SuperPro 6100N

DX3018 Adapter for XELTEK SuperPro 6100N

TL866II PLUS Programmer can use for items list:

Login to Download: Download software Device Support List instruction manual

Programmer Overview

1.1 Performance Introduction

Carefully built low-cost professional programmer, high-density chip production process, a

unified user interface, easy to use, functional integrity, application software, reliable

operation, code small, faster execution. supported operating system:

WINXP WIN2003 WIN2008 VISTA WIN7 WIN8 WIN10 32-bit or 64-bit operating system

? The programming speed is greatly improved. It is suitable for small batch production and supports 4 programmers for one computer.

? A wide range of chip support, the initial version supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test, 54/74 and CMOS4000 integrated circuit integrated functional test.

Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits.

25 series Nor Flash capacity support to 512Mbits.

? Pin contact check function, poor contact pin can pinpoint

? Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming

without external power integrated programmer. Portable performance super: the world's smallest volume, size 10CM * 6CM * 2.5CM, only the size of the driver's license.

? Programmable VCC from 1.8V to 6.5V, VPP from 1.8V to 18V chip

? Chip serial number secondary development functions: Programmer built a variety of commonly used automatic numbering function. And can use a custom algorithm to achieve any sequence number through DLL dynamic library. This feature allows you to produce

a unique identification info rmation for each chip in mass production. The logo can also be encrypted with a custom algorithm to more effectively protect your product's rights.

? Universal serial programming interface ICSP (to support both high-voltage parallel programming and low-volt age serial programming). Note: ICSP now supports 24-Series 25 Series 93 Series Serial Integrated Circuits, ATMEL89S51,52, AVR ATMEGAxxx Full

Series, and MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx Full Series, and the new series of SYNCMOS SM59Dxx SM59Rxx fu ll range chips for in-circuit serial programming.

? Powerful 54 / 74F / LS / HC CMOS4000 Series Integrated Functionality Tests: The First Development Programmer to Test Common Logic ICs True, Test Errors Locating Logic Gate Circuits, Test Arbitrary Possible input combinations.

1.2 Programmer chip support range

? Variety of 26 27 28 29 37 39 49 50 series of parallel ROM, EPROM, EEPROM

Fast, full support. Support TSOP32 TSOP40 TSOP48 chips to 64MBits, will join the TSOP56 pin support.

(TL866II programming voltage VPP only supports up to 18V, for early 27C series ROM, the

chip with 21V 25V VPP voltage no longer supports writing, but can be read. If it is used,

the VPP with the same type of programming voltage can be used as 13V or 12V chip replacement, for example: 27C32 21V or 13V Vpp chip,Pay attention to the VPP voltage)

? 24 25 35 45 85 93 95 Series Serial EEPROM

Serial Series Chip Support Full, Supports Chip Capacity 25 Series 8 or 16PIN to 512MBits (64M Bytes)

? NAND FLASH chip supports up to 8Gbits

? MCU series, hundreds of models of 51 series of microcomputer

? AVR microcontroller package scratch ATMEGA series ATtiny series AT90XXX series of microcontrollers, all AVR ATMEGAxxx chip also supports the ICSP interface for SPI serial download programming. Support AVR one-to-one soft-key with RC correction byte.

? MICROCHIP PIC10 PIC12 PIC16 PIC18 Series Microcontroller:

PIC series of more than 300 models, more than 900 package chip support, currently supports

one of the most complete PIC chip integrated programmer. For vario

us types of PIC monolithic, in strict accordance with the manufacturer's manual requirements, the optimal programming, programming speed is excellent. The vast majority of chips support both ISCP online programming and programming through programming sockets.

? GAL programmable logic device programming

? SRAM test

Support for common 24 61 62 DS12 series SRAM test, respectively, to data line testing,

address line testing, memory unit incremental testing and unit testing.

? Super performance 54 / 74F / LS / HC CMO

S4000 series integrated circuit integrated

Function test:

The first development-type programmer to really test common logic ICs to test for errors

that can be located to logic gates, and to test any possible combinations of inputs in an integrated circuit when testing.

Package In clude:

a. TL866CS programador con el paquete 1 pcs

b. Connect the USB cable 1 pcs

c. Softerware CD 1 pcs

27 Universal Adapter Package Contents

1. SOP44/PSOP44 Adpater 1 pcs

2. TSOP32/40/48 placa base 1 pcs

3. SOP56-DIP48 adpater 1 pcs

4. TSOP32/40/48 tablero superior de soldadura 1 pcs

5. TSOP48 adaptador 2in 1 base 1 pcs

6. TSOP40 (A) Bit placa Base 1 pcs

7. TSOP40 (B) 16bit placa base 1 pcs

8. TSOP32/40/48 tablero superior de soldadura 1 pcs

9. BGA48 adpater 1 pcs

10.SOP28-DIP28 300mil Adaptador 1 pcs

11. SOP20-DIP20 Adaptador 200-208mil 1 pcs

12. Adaptador 150mil SOP16-DIP16 1 pcs

13. SOP8-DIP8 200-208mil adpater 1 pcs

14. SOP8-DIP8 150mil adpater 1 pcs

15. BGA63 adpater 1 pcs

16. PLCC44-DIP40 1 pcs

17. PLCC32-DIP32 1 pcs

18. PLCC28-DIP24 1 pcs

19. PLCC20-DIP20 1 pcs

20. SOP8/MSOP8/SSOP8/SOP16-DIP16 simple adaptador 1 pcs

21. SOP16/SOP14/SOP8-DIP8 adpater

22. Adaptador SOP8-DIP8 simples 1 pcs

23. TSOP32/40/48-DIP40 NAND adpater

24. 1.8 V Adpater 1 pcs

25. TSSOP28 Adpater 1 pcs

26. SOIC8 SOP8 IC Flash clip 1 pcs

27. PLCC IC Extractor 1 pcs