Product Description

Package includes: 1PCS X SOP16-DIP16 Socket (150mil)

SOP16-DIP16 adapter (150mil) will work on all programmers

Stock: in stock

Condition: NEW

SOIC16 SOP16 To DIP16 CLIP for RT809H RT809F TL866CS TL866A TL866II EZP2010 EZP2013 TNM5000 SoFi-SP8 SoFi-SP16

Cable Size: 30CM

SPI FLASH chip SOP8 and SOP16 connection

A lot of new types of notebook and router is currently using 25 SPI memory chip, SOP16 chip package, such as MX25L3205 chip; although many programmers can support MX25L3205 chip, but it is the MX25L3205 chip supports SOP8 package, the MX25L3205 chip does not directly support the SOP16 package; and the adapter chip are not the same. One is 8 feet, one is 16 feet. So, is it possible to program SOP15 MX25L3205 chips in a simple way? In fact, the process is simple, because the 25 SPI chip SOP8 and SOP16 package chip, the definition of the corresponding foot is the same, as long as the corresponding SOP16 feet and SOP8 feet corresponding connection, the operating process can be used SOP8 MX25L3205 chip to operate on SOP16 MX25L3205 chip. (as long as 25 SPI chip models are identical, SOP8 and SOP16 chips can be used in this way)

25 SPI chip, SOP8 and SOP16 chip is interchangeable, as long as the chip pin corresponding to the line

Specifications for SOP8 packages and SOP16 packages:

SOP8 and SOP16 package, the foot spacing is the same, are 1.27, but the chip width is different. And chip definition of the corresponding pin is exactly the same, but the SOP16 chip packaging more than 8 feet NC empty feet (for future expansion as a basis), refer to the following figure, you can easily determine the SOP and SOP 25 SPI chip foot definition:

25 SPI SOP16 and SOP8 chip pins define the relationship:

The program can be programmed as long as the SOP16 pin is connected to the SOP8 adapter or directly to the programmer's seat.

In addition, MX25L3205 also has a TSSOP14 chip, the foot corresponding to the following picture:

GX1016-P008 Adapter for XELTEK SuperPro 7500

DX1026 Adapter for XELTEK SuperPro 6100N

DX3104 Adapter for XELTEK SuperPro 6100N

DX4021 Adapter for XELTEK SuperPro 6100N

Iprog+ Programmer V85 Support IMMO +Mileage +Airbag till 2019

Top 3 Reasons to Get Iprog+ Programmer:

1. Functions including airbag, dashboard, car radio, ecu, eeprom, immo, mcu.

and more special functions like dpf off, MIL to KM, PINABS, PINCODE SMATRA3,PINCODE SENSOR SPEED LIMIT,ODO Adjust, Fujutsu, Microchip, Motorola, Motorola912EN, NECV850, BLR, CAN,CRC_Cript, ibutton, sd_unlocker,test etc.

2. Reasonable price: much more cheaper than original iprog+, but work as well as the original

3. IProg+ is designed to work in the operating systems of the Windows family:

Windows xp

Windows vista

Windows 7

Windows 8

IProg+ Programmer Detailed Function List:

Working with odometers on OBDII connector

Working with odometers on the table through adapters

Work with multimedia unlocking the tape recorder

Work with keys (IMMO, Transponders), copying, preparation, unlocking

Work with IMMO-Key Auto dumps

Working with the airbag computer, deleting crash data

Transfer readings from miles to km

Read and write processors and its used in cars

Removing the particulate filter in the dump

Working with keys to the intercom

Realign Pin cod from dump (some brands)

Control board number, + scripts full Base number. Ability to update!

Iprog+ Programmer Software Display:

1. Airbag:

Read and erase crash to some cars

Read and erase DTC

Repair CFG

2. Dashboard:

Read km

Write a new km

3. Car Radio & ECU:

Car Radio:

Read and erase info

Reset count

ECU:

Immo OFF

DPF off

4. Eeprom:

Read/write/erase eeprom

5. Immo:

Program and copy chips for cars and truck

Unlock keys

Cover Toyota smart keys: reset key prepare

Write a key by immo dump

6. Mcu:

Read and write chips

Cover chips Atmel, Fujitsu and microchips Motorola, NEC v850

7. Special functions:

Mile to km

Pincode from dump

Iprog+ Programmer Connection Display:

IProg+ Programmer Package List:

1pc x iprog+ Main Unit

1pc x RFID 125+134 adapter

1pc x Eeprom adapter

1pc x UARTBDM adapter

1pc x OBD Cable

1pc x USB

1pc x CD

1pc x Can Adapter (Newly Add since Sep 16th, 2019)

1pc x K-line Adapter (Newly Add since Sep 16th, 2019)

1pc x Welding Line (Newly Add since Sep 16th, 2019)

DX0048 Adapter for XELTEK SuperPro 6100N

Encapsulation is LFBGA48, 8*6mm, spacing 0.8mm

Package type TQFP80

Adapter type COVER

Spacing 0.65mm

16 Universal Adapter Package Contents

1: 1.8 V Adpater 1 pcs

2: TSSOP28 Adpater< Gold Plating >1 pcs

3: SOIC8 SOP8 IC Flash clip 1 pcs

4: Adaptador 300mil SOP28-DIP28 < Gold Plating > 1 pcs

5: SOP20-DIP20 Adaptador 200-208mil< Gold Plating > 1 pcs

6: SOP8-DIP8 200-208mil adpater< Gold Plating > 1 pcs

7: Adaptador 150mil SOP16-DIP16 < Gold Plating > 1 pcs

8: Adaptador 150mil SOP8-DIP8< Gold Plating > 1 pcs

9. Adaptador PLCC44-DIP40 1 pcs

10: PLCC32-DIP32 1 pcs

11. Adaptador PLCC28-DIP24 1 pcs

12. Adaptador PLCC20-DIP20 1 pcs

13: SOP16/SOP14/SOP8-DIP8 adpater

14. SOP8/MSOP8/SSOP8/SOP16-DIP16 simple adaptador 1 pcs

15. Adaptador SOP8-DIP8 simples 1 pcs

16: PLCC IC Extractor 1 pcs

TNM5000 Universal Programmer Introduction

Login to Download: * Programmer latest Software

User Manual Device List Nand Software Utility Software for RS232 & USB Bl a ster Emulation

? 23000 Supported Devices Flash Memory (Parallel / Nand /Serial) , EPROM , EEPROM , Serial EEPROM , Microcontroller , NVRAM , FRAM , CPLD , PLD , FPGA).

? 48-Pins ZIF Socket with Pin Continuity tester & 10-Pins ISP/JTAG Connector.

? USB 2.0 High Speed ,Program 1 Gbit Nand Flash less than 50 sec , Reading Serial Flash memory with 6 Mbit/Sec Speed.

? Auto detection of all flash Memories/Microcontrollers with Device ID.

? User friendly software for Windows XP/VISTA/7/8 (32,64 bits).

? Multiple Programming is possible by attaching 2 or more Programmers to one PC.

? Very low cost Main Unit & Low cost adaptors.

? Special Abilities like, Altera US,B-B.l*a*s.ter Emulation for Quartus Software, Serial Port Emulation , Vehicle ECU , Immoblizer & Dashboard microcontroller Support.

Parallel Flash Memories: up to 56 pins parallel flash memories are supported by TNM5000. it Supports different kind of packages (PLCC , TSOP1 , TSOP2 ,VSOP & ...).

All Flashes can be automatically detected by software in case of unreadable device names. By using a single adaptor for all 32-48 pins TSOP flashes , user only need 1 adaptor for over 2000 flash chips.

Nand Flash Memories: TNM5000 has an additional Nand+ software , specially designed for Nand flash memories. Nand+ Software has one of the most complete list of Nand flash Memories with algorithms for correction of bad data in MLC Nand Flashes. TNM5000 is one of the fastest Nand Programmers in the world with Read & Write Speed up to 8 MegaByte per Second. All Nand Flashes can be automatically detected by software in case of unreadable or remarked device names.

Serial Flash Memories: All 8-16 Pins Serial SPI flash memories are supported by TNM5000. All SPI flash Memories can be detected automatically by software in case of unreadable device names. It reads & programs SPi flashes with maximum safe speed on ZIF (6-7 Mbit/second) . Also it Unprotects the write protected flashes before writing data to it.

Microcontrollers:

ATMEL: All AVR 8 bits chips (ATMEGA/ATTINY/AT90S) are supported on ZIF Scocket & by ISP cable. High Voltage Parallel on ZIF Programming of AVR up to 64 pins is supported. newly introduced ATXMEGA Series are supported by both PDI & JTAG Method. Old C51 series & new single cycle C51 series are completely supported. All the above series can be detected automatically by TNM5000. ARM7 programming by JTAG is supported.

Microchip: One of the most complete device list for microchip PIC microcontrollers including all PIC12F /PIC12C /PIC16C / PIC16F / PIC18F / DPIC33F / J & K Series. Devices up to 40 Pins can be programmed on ZIF , All PICs can be detected automatically & programmed by ISP cable.

Others: ST, SST, Philips (NXP) , Motorola , Syncmos, Silicon Lab , ICSI , Infineon , Intel , Winbond & ...

Automotive MCUS: Supporting of ST10F & TMS370 Series by ISP cable for many BOSCH/VALEO/SAGEM ECUs (complete ST10F support of XPROG-m programmer device list). supporting of siemense & infineon SAK-C167 connected to 44 or 48 pins flash (Siemense/BOSCH/SAGEM S2000 ECU) like HSE FlasHit Programmer. Supporting NEC & Motorola Devices for Dashboards.

PLD/CPLD/FPGA: Supporting All ALTERA JTAG Devices by emulation of USB B l a s t e r Programmer in Quartus Software. Supporting of Xilinx CPLD/FPGA with jed file. Fast Xilinx FPGA configuration with bit file. Supporting of GAL/PALCE Devices with special option for PALCE unlocking.

Software: With multiple language support (English / Chinese / Russian /polska /Arabic / French /FARSI). More languages & Devices can be added by customer request. You Can Download Software & run it in Demo mode to evaluate it.

Package List:

1 x TNM5000 Programmer

1 x USB Cable

1 x software CD

1 x TSOP56 adapter set IC socket (5PCS)

1 x TQFP32-DIP32 Adapter

1 x TQFP32-DIP28 Adapter

1 x TSOP48-DIP48 Adapter

1 x SOP44-DIP44 Adapter

1 x SOP28-DIP28 300mil adapter

1 x SOP8-DIP8 200-208mil adapter

1 x SOP8-DIP8 150mil adapter

1 x TSSOP28 to DIP28 adapter

1 x TSSOP8 to DIP8 adapter

1 x SOP16 TO DIP16 adapter

1 x SOP20-DIP20(200~208mil)adapter

1 x PLCC44-DIP44 adapter

1 x PLCC32-DIP32 adapter

1 x PLCC28-DIP24 Adapter

1 x PLCC20-DIP20 Adapter

1 * Multipurpose ISP-DuPont-Header Adapter

1 * TSOP28Pin 0.65mm Adapter Board

1 * SOP28Pin 1.27mm Adapter Board

1 * TSOP20Pin 0.65mm Adapter Board

1 * SOP20Pin 1.27mm Adapter Board

1 * TSOP16Pin 0.65mm Adapter Board

1 * SOP16Pin 1.27mm Adapter Board

1 * TSOP14Pin 0.65mm Adapter Board

1 * SOP14Pin 1.27mm Adapter Board

1 * TSOP10Pin 0.65mm Adapter Board

1 * SOP10Pin 1.27mm Adapter Board

1 * TSOP8Pin 0.65mm Adapter Board

1 * SOP8Pin 1.27mm Adapter Board

1 x SOP16/SOP8 simple Adapter

1 x SOIC8 SOP8 To DIP8 CLIP

1 x IC Chip Extractor