DX4022 Adapter for XELTEK SuperPro 6100N

DX3021-1 Adapter for XELTEK SuperPro 6100N

TL866II PLUS Programmer can use for items list:

Login to Download: Download software Device Support List instruction manual

Programmer Overview

1.1 Performance Introduction

Carefully built low-cost professional programmer, high-density chip production process, a

unified user interface, easy to use, functional integrity, application software, reliable

operation, code small, faster execution. supported operating system:

WINXP WIN2003 WIN2008 VISTA WIN7 WIN8 WIN10 32-bit or 64-bit operating system

? The programming speed is greatly improved. It is suitable for small batch production and supports 4 programmers for one computer.

? A wide range of chip support, the initial version supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test, 54/74 and CMOS4000 integrated circuit integrated functional test.

Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits.

25 series Nor Flash capacity support to 512Mbits.

? Pin contact check function, poor contact pin can pinpoint

? Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming

without external power integrated programmer. Portable performance super: the world's smallest volume, size 10CM * 6CM * 2.5CM, only the size of the driver's license.

? Programmable VCC from 1.8V to 6.5V, VPP from 1.8V to 18V chip

? Chip serial number secondary development functions: Programmer built a variety of commonly used automatic numbering function. And can use a custom algorithm to achieve any sequence number through DLL dynamic library. This feature allows you to produce

a unique identification info rmation for each chip in mass production. The logo can also be encrypted with a custom algorithm to more effectively protect your product's rights.

? Universal serial programming interface ICSP (to support both high-voltage parallel programming and low-volt age serial programming). Note: ICSP now supports 24-Series 25 Series 93 Series Serial Integrated Circuits, ATMEL89S51,52, AVR ATMEGAxxx Full

Series, and MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx Full Series, and the new series of SYNCMOS SM59Dxx SM59Rxx fu ll range chips for in-circuit serial programming.

? Powerful 54 / 74F / LS / HC CMOS4000 Series Integrated Functionality Tests: The First Development Programmer to Test Common Logic ICs True, Test Errors Locating Logic Gate Circuits, Test Arbitrary Possible input combinations.

1.2 Programmer chip support range

? Variety of 26 27 28 29 37 39 49 50 series of parallel ROM, EPROM, EEPROM

Fast, full support. Support TSOP32 TSOP40 TSOP48 chips to 64MBits, will join the TSOP56 pin support.

(TL866II programming voltage VPP only supports up to 18V, for early 27C series ROM, the

chip with 21V 25V VPP voltage no longer supports writing, but can be read. If it is used,

the VPP with the same type of programming voltage can be used as 13V or 12V chip replacement, for example: 27C32 21V or 13V Vpp chip,Pay attention to the VPP voltage)

? 24 25 35 45 85 93 95 Series Serial EEPROM

Serial Series Chip Support Full, Supports Chip Capacity 25 Series 8 or 16PIN to 512MBits (64M Bytes)

? NAND FLASH chip supports up to 8Gbits

? MCU series, hundreds of models of 51 series of microcomputer

? AVR microcontroller package scratch ATMEGA series ATtiny series AT90XXX series of microcontrollers, all AVR ATMEGAxxx chip also supports the ICSP interface for SPI serial download programming. Support AVR one-to-one soft-key with RC correction byte.

? MICROCHIP PIC10 PIC12 PIC16 PIC18 Series Microcontroller:

PIC series of more than 300 models, more than 900 package chip support, currently supports

one of the most complete PIC chip integrated programmer. For vario

us types of PIC monolithic, in strict accordance with the manufacturer's manual requirements, the optimal programming, programming speed is excellent. The vast majority of chips support both ISCP online programming and programming through programming sockets.

? GAL programmable logic device programming

? SRAM test

Support for common 24 61 62 DS12 series SRAM test, respectively, to data line testing,

address line testing, memory unit incremental testing and unit testing.

? Super performance 54 / 74F / LS / HC CMO

S4000 series integrated circuit integrated

Function test:

The first development-type programmer to really test common logic ICs to test for errors

that can be located to logic gates, and to test any possible combinations of inputs in an integrated circuit when testing.

QFN8 turn to DIP8 test seat Adapter Sockets

Pin spacing 1.27mm

The applicable chip size is 5*6MM

BGA100 programming adatapter is an easy use tool to connect chip and PC. Just like a U disk!

Includes size limiter: 14x18mm ( buy eMMC100 test socket , get 1 piece complimentary frame guides )

Feature:

1. Apply to eMMC of Samsung, Sandisk, Toshiba, Hynix and Intel.

2. With 88pins and pin pitch 1.0mm, eMMC size 14x18mm , we also provide another type of size 12x18

3. Apply to eMMC thickness of 0.6mm to 2.0mm.

4. Test can be carried out with or without balls.

5. This product applies to BGA 100.

6. Easy operation by inserting USB to your PC directly.

CHIP PROGRAMMER SOCKET TQFP32 QFP32/ LQFP32 TO DIP28 adapter socket support ATMEGA8 series

Description:

Best quality, QFP32 to 28Dip Adapter

Suitable for QFP32 IC

patch size : 0.8mm 7mm * 7mm

Feature:

Support Atmel Atmega TQFP32 device

eg.mega328 mega8A mega48 mega8 mega88 mega16 mega162 mega168

Comes with AVRISP header, directly connect to AVRISP, USBASP, MkII, for direct burning of firmware or arduino bootloaders

Crysal header so that crystal can be replaced easily

Convert to DIP28 Atmega328 format, Pin to pin comptabile with Atmega DIP28 MCU format

Package included:

Programmer Adapter QFP32 to DIP28

XELTEK SuperPro 6100N (so not 6100)Universal Programmer 100,000+ devices supported

Login to Download: Download software

SuperPro 6100N is a cost-effective, reliable, and high-speed universal chip programmer. It is designed to communicate using USB 2.0 port for development requirement and can also work in standalone mode (without connecting to a PC) for production requirement. It has the largest device support count in the programming industry with 144 pin drivers to support high pin count chips.

Application and target customers: Programming houses, electronic repair, car repair shops, forensic and data recovery companies, medical devices, requirement for larger device support.

Advantages of SuperPro 6100N

Ultra Fast Programming Speed SuperPro 6100 is designed with high programming speed in mind. Our semiconductor manufacturer approved algorithms, precision and clean signals guarantee high programming yield. Special design was made to eliminate overshoot and ground bounce. Algorithms are performed with state machine architecture constructed with FPGA to achieve a ultra-high programming speed.

Largest Device Support Located in Silicon Valley, we keep good relationships with many major IC companies that are important for us to continuously support new devices. SuperPro 6100 currently supports more than 100,000 devices, which is the largest device library in the programming industry. Requested device algorithms can be added within a week - average lead time from other manufacturers is over two months.

Built-in 144 Pin Driver Most universal IC programmers are designed with 48 pin driver or less. Programmers with a 48 pin driver design need special adapters (pin mapping) to accommodate devices with more than 48 pins. Bottom boards needed for pin mapping can quickly increase production costs just to support one package type. SuperPro 6100N is equipped with a built-in universal 144 pin driver to accommodate large pin count devices. One universal adapter accommodates all devices with the same package type.

Stand-Alone Mode Unlike many other universal programmers in the industry, SuperPro 6100N is capable of operating in stand-alone mode. Under stand-alone mode, SuperPro 6100 can be operated by an inexperienced operator with minimal training. Once the project file is selected, the operator only has to insert a blank chip and remove the programmed chip upon beeping. This ensures a minimal chance that an operator will make a mistake. Users can also use clusters of stand-alone programmers to achieve high volume production. Last but not the least, stand-alone mode saves both the cost of PC and labor of the trained and qualified operator.

Tester for Logic Devices and SRAMs In addition to having a large device library, SuperPro 6100 programmer is also designed for IC testing of varioudevices such as TTL, CMOS Logic (74/4000 series), and SRAM memory devices.

Hardware and Electrical Specifications

Devices supported

EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU

Package types supported

DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON, EBGA, FBGA, FTBGA, VFBGA, BGA, CSP, SCSP, QFN, HVQFN etc.

PC interface

USB 2.0

Stand-alone memory

Compact FLASH Card

Power supply

AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

Dimensions

Main unit: 148(L) x 216(W) x 94(H) mm

Package: 301(L) x 252(W) x 145(H) mm

Weight

Main unit: Weight 3.5 lbs (1.6 Kg)

Package: Weight 6.2 lbs (2.8Kg)

Expanded Features

Operate multiple units to construct a concurrent multi-programming system. Cluster 1-15 units for flexible volume production.

Support devices with Vcc from 1.2V - 5V.

Support files up to 256 GB.

Over-current and over-voltage protection for safety of the chip and programmer hardware.

Only IC manufacturer approved programming algorithms used for high reliability.

Vcc verification (at +5% ~ -5% and +10% ~ -10%) enhances programming reliability.

Ac Acessories:

Main unit with a DIP48 adaptor, AC adaptor, USB2.0 cable, user manual, software CD, register card

Optional accessories: adaptor in varies packages, CF card for stand-alone operation.

Packing List:

1 * XELTEK SuperPro 6100N Programmer

1 * AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

1 * USB Cable

1 * CD Software

1 * DX0001 Adapter

1 * TSOP48 Adapter

1 * SOP44-DIP44 1.27mm (530mil) Adaptador

1 * PLCC44-DIP44 2.54mm (1060mil) Adaptador

1 * PLCC32-DIP32 2.54mm Adaptador

1 * TSSOP16-DIP16 (170mil) Adaptador

1 * TSSOP28-DIP28 (170mil) Adaptador

1 * SOP28-DIP28 (300mil) Adaptador

1 * SSOP34-DIP34 (220mil) Adaptador

1 * SOP8-DIP8 (150mil) Adaptador

1 * SOP16-DIP16 (150mil) Adaptador

1 * Double SOP8-DIP16 (208mil) Adaptador

1 * SOP20-DIP20 (200mil) Adaptador

1 * SOP8-DIP8 Simple Adaptador

1 * QFN8 WSON8 Simple Adaptador

1 * SOP16/8-DIP8 REV4 Simple Adaptador

1 * MSOP8/SSOP8/SOP8/SOP16-DIP16 Simple Adaptador

1 * SSOP4-28PIN 0.65mm / SOP4-28PIN 1.27mm Simple Adaptador

1 * LCD LED screen EDID code

1 * SOP8 Clamp Test

1 * IC Chip Extractor

SA638 Adapter PSOP44/D44 for XELTEK SuperPro 610P 611S

LATTICE USB ISP Download Software

Login to Download: Download software

Product specification:

1. Lattice original design solution quality guarantee, ensure compatibility stability.

2. There is no need to install the driver separately, directly support Diamond/ispLever6.x/7.x/classic version, ispVM various versions.

3. Support lattice full range of FPGAs, such as SC/SCM/XP/XP2/EC/ECP2/ECP2M/MachXO/MachXO2 series.

4. Support lattice full range of CPLD, such as 1000/2000/4000 series.

5. USB standard interface, using a standard USB cable to connect to a PC.

6. USB power supply, no external power supply support.

7, interface part of the power from the target board to ensure strong compatibility!

8. Support JTAG, internal FLASH, SPI FLASH and other programming modes.

9. Support WIN 2K, WIN XP, WIN7 32, WIN7 64 and other operating systems.

10, support for LSC ISPVM, LATTICE DEMIOND, LATTICE ISPEVER, and LATTICE PROGRAMMER, all these LATTICE development environments, and have actually been tested!

Pin link description:

(1) SCLK/TCK is connected to the chip's SCLK/TCK pin.

(2) GND The public ground of the downloader and the target board is connected to the internal 2 and 4 pins. When it is used, one of the feet 2 and 4 needs to be connected to the ground of the target board.

(3) MODE/TMS is connected to the MODE/TMS pin of the chip.

(4) The GND downloader is also a common ground of the target board, and its internal 2 and 4 pins are connected. In use, it is necessary to connect one of the feet 2 and 4 to the ground of the target board.

(5) SDI/TDI is connected to the chip's SDI/TDI pin.

(6). VCC is used to detect whether the target board connected to the downloader is powered on. It is not used to power the target board. The official downloader does not have the ability to supply power to the target board. This needs attention.

(7) SDO/TDO is connected to the SDO/TDO pin of the chip.

(8), INTI Need to connect this pin when downloading and debugging some chips, not every chip needs to be connected.

(9) TRST It is necessary to connect this pin when downloading and debugging certain chips. Not every chip needs to be connected.

(10) PROG/ispEN needs to connect this pin when downloading and debugging certain chips. Not every chip needs to be connected.

Shipping list:

1. LATTICE USB download line body.

2. USB 2.0 high-speed link line.

3. 10pin 2.54MM pitch JTAG connection.

4. 10 with a single share of DuPont.

Login to Download: Download software

Product Description

The ELM327 Bluetooth OBDII scanner is an engine performance and diagnostics tool for both automotive enthusiasts and professionals. Paired with your Android smartphone or tablet, the ELM327 Bluetooth allows you to easily scan and clear engine codes, view and save real-time engine and performance data and much more.

Features:

Read and erase diagnostic trouble codes (DTCs) and turn off the check engine light

Connect to an Android Smartphone using one of the many free compatible apps or a Bluetooth enabled computer using the supplied software

View real-time vehicle data, graphs and performance parameters while you're driving

Find and fix problems before they happen

Pays for itself with one use

Connects wireless via Bluetooth up to 3 meters (no annoying cables)

NOT Compatible with all OBDII compliant vehicles (Check list of compatible vehicles)

Genuine ELM327 processor

Bluetooth Pairing Password: 1234

Multi-Protocol Support:

ISO 9141-2 (5 baud init, 10.4 kbaud)

ISO 14230-4 KWP (5 baud init, 10.4 kbaud)

ISO 14230-4 KWP (fast init, 10.4 kbaud)

ISO 15765-4 CAN (11 bit ID, 500 kbaud)

ISO 15765-4 CAN (29 bit ID, 500 kbaud)

ISO 15765-4 CAN (11 bit ID, 250 kbaud)

ISO 15765-4 CAN (29 bit ID, 250 kbaud)

SAE J1939

NOTE: Not compatible with older GM and Ford vehicles that use the SAE J1850 VPW and SAE J1850PWM protocols

TSOP-VSOP-SSOP Adapter Board V1

GX3109 Adapter for XELTEK SuperPro 7500