XELTEK SuperPRO 610P Universal Programmer can use for items list:

Login to Download: Download software

Xeltek SuperPro 610P is a device for programming EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR, NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, FWH, microcontrollers, standard micrologic circuits.

Features

Universal 48-pin driver supports today's most complex devices.

Possibility to connect 99% of the existing microelectronic circuits in case you buy a corresponding adapter.

Programs devices with Vcc as low as 1.2V.

In-system programming (ISP / ICP) capability.

Programming / testing features for TTL/CMOS logic ICs and memories.

Software updates.

RoHS compatible, CE, ISO 9001, ISO 14001 certificates.

Application

Device repair ? re-flashing microchips, microcontrollers.

Flashing new microchips.

Serial manufacturing - microchips, microcontrollers programming.

Restoring data from microchips of solid-state drive.

Technical Specifications

Input/Output built-in 48 pin connector

Package Types DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, BGA, CSP, SCSP

Interface USB 2.0

Software compatible OS Windows XP, Windows Vista, Windows 7, Windows 8 (32/64 bit)

Power Supply Input 90 V-250 V AC, output 12 V DC/1.5 A

Size, L W H 178 130 40 mm

Weight 0.38 kg (without package)

Packing List:

1 * XELTEK SuperPro 6100N Programmer

1 * AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

1 * USB Cable

1 * CD Software

1 * PLCC44 to DIP44 Adaptador

1 * PLCC32 to DIP32 Adaptador

1 * TSOP48 Adapter

1 * SOP44-DIP44 1.27mm (530mil) Adaptador

1 * SOP16-DIP16 (300mil) Adaptador

1 * SOP20-DIP20 (300mil) Adaptador

1 * SOP28-DIP28 (300mil) Adaptador

1 * TSSOP16-DIP16 (170mil) Adaptador

1 * TSSOP20-DIP20 (170mil) Adaptador

1 * TSSOP24-DIP24 (170mil) Adaptador

1 * TSSOP28-DIP28 (170mil) Adaptador

1 * SSOP20-DIP20 (220mil) Adaptador

1 * SSOP28-DIP28 (220mil) Adaptador

1 * SSOP34-DIP34 (220mil) Adaptador

1 * SOP8-DIP8 CNV-SOP20 (208mil) Adaptador

1 * Double SOP8-DIP16 CNV-SOP20 (208mil) Adaptador

1 * SOP20-DIP20 CNV-SOP20 (208mil) Adaptador

1 * SOP8-DIP8 CNV-SOP-DIP16 (150mil) Adaptador

1 * SOP16-DIP16 CNV-SOP-DIP16 (150mil) Adaptador

1 * PLCC44-DIP44

1 * PLCC44-DIP40

1 * PLCC32-DIP32

1 * PLCC28-DIP28

1 * PLCC28-DIP24

1 * PLCC20-DIP20

1 * SOP8-DIP8 Simple Adaptador

1 * QFN8 WSON8 Simple Adaptador

1 * SOP16/8-DIP8 REV4 Simple Adaptador

1 * MSOP8/SSOP8/SOP8/SOP16-DIP16 Simple Adaptador

1 * TSOP28Pin 0.65mm Adapter Board

1 * SOP28Pin 1.27mm Adapter Board

1 * TSOP20Pin 0.65mm Adapter Board

1 * SOP20Pin 1.27mm Adapter Board

1 * TSOP16Pin 0.65mm Adapter Board

1 * SOP16Pin 1.27mm Adapter Board

1 * TSOP14Pin 0.65mm Adapter Board

1 * SOP14Pin 1.27mm Adapter Board

1 * TSOP10Pin 0.65mm Adapter Board

1 * SOP10Pin 1.27mm Adapter Board

1 * TSOP8Pin 0.65mm Adapter Board

1 * SOP8Pin 1.27mm Adapter Board

1 * Multipurpose ISP-DuPont-Header Adapter

1 * Anti-Static Wristband Wrist Strap Band ESD Discharge PC Electricity Grounding

1 * LCD LED screen EDID code

1 * SOP8 Clamp Test

1 * IC Chip Extractor

Login to Download: Download software

Function

Debug the program with the simulation software, and support the simulation of 32bit-M0/8051/8-BIT E/mbedded ICE Series MCU.

(the simulation software must be keil mdk-armv4.53/m2ide v143 or later)

Note

Can be used with Starter kit STK_32FXXX for learning.

The self-developed Target board must pull out the SWD pin to debug with SN-LINK-V3.

Use with Starter kit STK_25EXX/26EXX/27EXX/22EXX/29EXX for learning.

The self-developed Target board must pull out EICK/EIDA pin to debug with SN-LINK-V3.

Use with Starter kit STK_57XX/58XX for learning.

The self-developed Target board must pull out the SWD pin to debug with SN-LINK-V3.

Supporting operating system: Win2000/XP-32bit/Vista-32bit/Win7-32bit/Win8.

The use of programmer selftest command,to check if there is problem itself.

Selftest way I:

Step 1 : Input the SELFTEST in the Enter chip printing,click

Step 2 : Click ,look at the hint in the display area,selftest 0 means the test pass;

Step 3 : Install the NO.1 test board and the short port of VGA ISP(short circuit the 4pins and 11pins,12pins and 15pins);

Step 4 : Click ,check the hint in the software,it will hint Selftest 1,test pass;

Step 5 : Install the NO.2 Self Test Board;

Step 6 : Click ,check the hint in the software,it will hint Selftest 2, test pass;

Selftest way II :

Step 1 : When there is no chip on the locking seat,input the type of 25XX in Enter Chip Printing;

Step 2 : Click ,it will hint that there is no chip or the locking seat hasnt been impacted well,which is normal;

If it hints that there may be a pin empty solder;

Attention : In the case of that some users have no test board,as long as the selftest 0 and 25 chip test pass,the machine is normal.

If there is other hints when doing selftest 0,the way to deal with it could be as following:

The problem of connection with computer and the programmer,please step-by examine according to the hint of failure process;

Hardware trouble like pin electric leakage,problems inside the pins,VPP open circuit,GND open circuit,VPP short circuit,VCC short circuit,GND short circuit,VPP protection not shut off,which must be returned to factory to repair.

DX2020 Adapter for XELTEK SuperPro 6100N

1. IT85 series simple adapter plate 1PCS

2. FFC Line 200MM 0.5mm-32P 1pcs

3. FFC Line 200MM 1.0mm-32P 1pcs

4. FPC Base Under 0.5mm-32P 1pcs

5. FPC Base Under 1.0mm-32P 1pcs

DX3031 Adapter for XELTEK SuperPro 6100N

DX4023 Adapter for XELTEK SuperPro 6100N

Features:

- USB2.0 high speed port(480Mbit/s)

- 14PIN standard JTAG port, support TI core processor

- Support multi processorss: TMS320C28x, TMS320C54x, TMS320C55x, TMS320C64x+, TMS320C674x, ARM 9, ARM Cortex R4, ARM Cortex A8

- Support power off detection

- Support FTDI device drive

- Support time self adaption

- Support Code Composer Studio v4 or above

- Support LED light display control USB connection

Operation System:

- Windows 2000

- Windows XP

- Windows Vista

- Windows 7

Package Included:

- 1* XDS100 V2 Emulator

- 1* USB 2.0 Cable

- 1* 14Pin flat cable

Obd2 Pin Out Box Breakout Box Tester Diagnostic Obd2 Pin Connector Covere All Test Points

Description:

This tool is used to change the pin settings of other diagnostic tools/scanners without the needs to cut the connecting cable for re-wiring. You can also quickly switch between different terminals of your vehicle's OBD socket when using beta software/hardware. Comes with a quality lead with 16 pins wired. With a 16 pin female OBD connector, 16 pin male OBD connector and 15 pin D plug to connect to the breakout box.

Features:

All test points covered.

Allows monitoring of any OBD2 diagnostic systems.

Quickly switch data points without soldering.

Ideal for checking vehicle\'s diagnostic status.

Package list:

1 x OBD Breakout box with all test points.

1 x Cable

Suitable for machine models & programmers, such as ALL-100GANG, ALL-11 series, LT-48 series, SuperPRO series, TOP series and all other programmers.

Support chips 1: ATmega16, ATmega32, ATmega8535, ATmega16A, ATmega32A, ATmeag164P, ATmega324P, ATmeag644P, ATmega1284P

Support chip 2: ATmega162, ATmega8515 and other related models need to be downloaded through ISP or JTAG

Universal IC Socket SSOP20 seat (0.65 spacing), has a long service life, suitable for all SSOP20 SSOP16 SSOP14 chip.

The suitable model and programmer. Such as: ALL-100GANG, ALL-11 series, LT-48 series, SuperPRO series, TOP series programmer all

Support: suitable for all SSOPS20 chip packaging base

SOP4-SOP28 SSOP4-TSSOP28 SMD to DIP Adapter Board (pin spacing 0.65mm/1.27mm)

Specific size chart:

Please check carefully before the size of the board for the pros and Cons: one side is applicable to the pin spacing 0.65mm (compatible with SSOP4~24 feet); the other side is applicable to the pin spacing 1.27mm (compatible with SOP4~24 feet)