DX1044-1 Adapter for XELTEK SuperPro 6100N

Center pin 6*5 1.27mm Spacing

CANalyst-II USB to CAN Analyzer CAN-BUS Converter Software

Login to Download: Download software

Description:

USB and CAN-bus protocol conversion;

USB-CAN-1(x) is signal channel intelligent CAN interface module;

USB-CAN-2(x) is dual-channel intelligent CAN interface module;

CANalyst-II Analyzer is dual-channel intelligent CAN interface module with CAN-bus protocol analysis capabilities;

PC interface supports USB1.1 protocol and is USB 2.0 compliant;

Supports CAN2.0A and CAN2.0B protocols supports standard and extended frame;

Support CAN transmit and CAN Receive;

Support data frame and remote frame;

Programmable CAN-bus communication Baud rates from 10Kbps to 1Mbps;

USB-CAN-(x)A products:not isolated in the CAN-bus terminal;

USB-CAN-(x)B /C products: isolated with independently isolated DC-DC power module and High-speed magnetic coupling isolation module in the CAN-bus terminal;

CANalyst-II Analyzer: isolated with independently isolated DC-DC power module and High-speed magnetic coupling isolation module in the CAN-bus terminal;

Max data flow for a single channel: 8000 fps (standard frame) for receiving and 8000 fps(standard frame) for transmitting;

Buffer size:1000 frames length buffer for transmit(with auto repeat transmit when failed) per channel,2000 frames length for receive per channel;

Adopts USB bus power supply, eliminating the need for an external power supply;

USB-CAN-(x)A products,no electrical isolation;

USB-CAN-(x)B products, adopts electrical isolation, the isolation voltage is : 1000V;

USB-CAN-(x)C products, adopts electrical isolation, the isolation voltage is : 2500V;

CANalyst-II Analyzer, adopts electrical isolation, the isolation voltage is:2500V;

Operating temperature: -20 ~ 85 ?;

Physical size: (length) 70mm * (width) 45mm * (height) 24mm;

Product compatibility:Function library is similar to the library in Guangzhou ZLG USBCAN interface module.

Typical applications:

Transmit or receive massages in CAN-bus network with PC or laptop's USB;

The fast CAN network data collection, data analysis;

CAN-bus-USB gateway;

USB interface to CAN network interface;

Extend CAN-bus line length;

Industrial site CAN network data monitoring.

Include:

1 x USB-CAN Analyzer

1 x USB Cable

Multipurpose ISP-Header01 Adapter Pinout Information

The PCB end of the adapter is composed of 48 pins, dual in line layout. Only the last 5 pins of each column of pins is used. So, it is just a 10 pin header.

Here is the pin mapping layout:

Pin#1 --> Brown

Pin#2 --> Orange

Pin#3 --> Green

Pin#4 --> Purple

Pin#5 --> White

Pin#6 --> Black

Pin#7 --> Grey

Pin#8 --> Blue

Pin#9 --> Yellow

Pin#10 -->Red

Latest Version X-PROG Box ECU Programmer XPROG-M V5.84 with USB Dongle

XPROG-M V5.84 X-PROG software

Login to Download: Download software

Install Notice

XPROG-M V5.84 windows system required as below:

1. Windows system should be windows7 64 bit, all the patch software for the windows system should be installed already and the windows properly works well...

2. The windows system should be with at lest 2 partitions (except the CD ROM.)

3. Can not be working with virtual harddisk.

XPROG-M V5.84 Highlights:

1. Latest software version: V5.84,Firmware:V4.4

2. With USB Dongle, No need to activate

3. Add new authorization: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9

4. Language: English

XPROG-M V5.84 using tips:

1. You are not allowed to use this newest dongle to update the older version Xprog to V5.84

2. Close all of the computer anti-virus software. If not, X-prog software may be killed.

3. Disconnect the internet. If not, the internet maybe damage the hardware.

4. Uninstall all of the old version xprog-m or xprog box software before you install V5.84 software we provide, because our xprog-box hardware is not compatible with other lower or higher version software, otherwise the hardware will be damaged and will lose its warranty...

5. Never try to UPDATE, the hardware will be damaged if you want to try to update it online, then you will lose its warranty.

XPROG-M V5.84 Authorizations:

AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)

AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)

AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)

AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)

AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)

AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)

AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.

AUTH-0008 BMW EWS3 authorization

AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)

AUTH-0010 MB ZGS001 authorization

AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)

AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)

AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)

AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)

AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)

AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)

AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage, Chassis number (VIN), serial number and PIN code).

AUTH-0023-1 MAC7xxx

AUTH-0023-2 XC23xx

AUTH-0024-1 MC9S12Cxx

AUTH-0024-2 MC9S12XE

AUTH-0024-3 9S12XE SECURITY

AUTH-0024-4 MC9S12HA/HY/P

AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13

AUTH-0027-1 HC(S)908 update Authorized 2016/3/13

AUTH-0027-2 HC(S)908 sercurity Authorized 2016/3/13

AUTH-0028-1 Renesas V850 Authorized 2017/10/9

AUTH-0028-2 Renesas SuperH Authorized 2017/10/9

XPROG-M V5.84 Adapters:

ADP-0001 TMS370 PLCC28 programming adapter

ADP-0002 TMS370 PLCC44 programming adapter

ADP-0003 TMS370 PLCC68 programming adapter

ADP-0004 Motorola HC05B/X PLCC52 programming adapter

ADP-0005 Motorola HC05B/X QFP64 programming adapter

ADP-0006 ST M35080 in-circuit programming adapter

ADP-0008 TMS374 family in-circuit programming adapter

ADP-0009 MC68HC05V12 programming adapter

ADP-0010 TMS374 on-board programming adapter

ADP-0011 HC11EA9/E9 programming adapter

ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter

Additional adaptor for 5M48H P-Flash

ADP-0019 Rev.A

EWS3 adaptor

EEPROM adaptor

QFP28 adaptor

QFP64 adaptor

QFP80 adaptor

QFP112 adaptor

QFP144 adaptor

XPROG-M V5.84 Install manuals in words:

1. Click the file "installation.reg", get the file information to the regedit.

2. Install the file "AdbeRdr11000_zh_CN.exe", it is a must, otherwise the Xprog software will not start.

3. Plug the Xprog main interface to the computer, install the USB driver.

4. Copy the folder "XPROG-BOX5.84" to the desktop, and open it, and run the "xprogdesktop.exe", then software open.

Package Includes:

1pc x XPROG-Box Hardware (Aluminum Enclosure) .

20pcx Adapters Set

1pc x USB Cable.

1pc x USB Dongle

1pc x CD with XPROG-Box Software (V5.84)

Product Description

Package includes: 1PCS X SOP8 DIP8 Socket (150mil)

SOIC8-DIP8 adapter (150mil) will work on all programmers

Stock: in stock

Condition: NEW

Login to Download: * VGA_adpter DIY for T56 Programmer

Package include:

one pcs SN-ADP-VGA adapter

one pcs VGA adapter cable

Note: please don't make a adapter by manually connection. HDMI-compatiblesignal working frequency up to 900mb / s. The different length of lines and the crossing of lines may make the HDMI-compatible can't work normally.

The VGA head on PCB board is female.

For serial printing and ISP on-line programming.

You can use VGA to USB3.0/USB2.0 cable and VGA to headset cable, can buy on website or do it yourself according to the wiring diagram. All kinds of lines can be recognized automatically by the software.

Please note:This adapter only can work on XGecu T56 programmer, other programmers cannot use it!!!

XG-ADP-BGA64A-1.0mm spacing frame 11*13mm Adapt to S29GL512 S29GL256 S29GL128 S29GL064 S29GL032

XG-ADP-BGA64A-1.0mm spacing frame 10*13mm Adapt to 28F640,28F128

XG-ADP-BGA64A-1.0mm spacing frame 10*15mm Adapt to 28F256

Product Description

Package includes: 1PCS X TSOP-48-0.5-OTS048 Socket

TSOP32-40-48 Programmer Adapter TSOP-48-0.5-OTS048 Socket for TL866

Stock: in stock

Condition: NEW

RT809H Programmer application software

Login to Download: Download software Newest Patch Download Device List EDID code Reading & Writing Use User Manual

RT809H EMMC-Nand FLASH Programmer + 55 Adapter Super All-around Combination

Full Support LCD TV FLASH drivers read and write unlimited capacity TSOP48 nand FLASH EMMC TSOP56 pin TOP8-16 pin Support CAR DVD, SMART TV.

The Only universal programmer which can automatically detect chip number for all Chips.

The only universal programmer which can put ic in any position and make intelligent sense.

The Only universal programmer Support Read and program Laptop I/O via keyboard line.

The Only universal programmer Support Read and Program LCD TV VIA VGA and HDMI PORT.

The Only universal programmer Support ADD new flash by yourself without wait for factory.

The Only universal programmer built in Most of repair applications TV,DVD,DVB,and many isp software.

The Only universal programmer make selftest for LCD TV itself and diagnostic fault.

The best programmer to read and programing flash on motherboard without removing out

Support Read and Programming OTP area .

Support UPTO 64GB NAND FLASH

Short description:

48-pins powerful pindrivers, no adapter required for any DIL devices

ISP connector for in-circuit programming

VGA port to read and write LCD TV-MONITORS without disassembly .

HDMI port to read and write LCD TV-MONITORS without disassembly .

Connection to PC: USB 2.0 (up to 480 Mbit/s, high speed/full speed) and 1.1 compatible interface

Comfortable and easy to use control program, works with all versions of MS Windows

Can support any flash and very easy to add new flash .

High programming speed.

Advanced and powerful software functions.

Online Technical Support is also available 24 hours .

One Year warranty.

Provides very competitive price coupled with excellent hardware design for reliable programming.

the programmer performs device insertion test (wrong or backward position) and contact check (poor contact pin-to-socket) before it programs each device. These capabilities, supported by overcurrent protection and signature-byte check help prevent chip damage due to operator error.

The selftest capability allow to run diagnostic part of software to thoroughly check the health of the programmer.

Support Auto select for any series of flash including TSOP48-NAND-EMMC-PLCC,,ETC however Programmer is driven by an easy-to-use control program with pull-down menu, hot keys and on-line help. Selecting of device is performed by its class, by manufacturer or simply by typing a fragment of vendor name and/or part number.

All known data formats are supported. Automatic file format detection and conversion during loading of file.

The software also provide a special information about programmed device. As a special, the drawings of all available packages are provided

The software provide a full information for ISP implementation: Description of ISP connector pins for currently selected chip, recommended target design around in-circuit programmed chip and other necessary information.

Packing List:

1 * RT809H universal programmer

1 * RT-BGA48-01 V2.0 EMMC NW267 BGA63 0.8mm Adapter

1 * RT-BGA63-01 V2.0 EMMC NW267 BGA63 0.8mm Adapter

1 * RT-BGA64-01 1.0mm spacing frame 11*13mm special EMMC Adapter

1 * RT-BGA169-01 EMMC seat EMCP153 EMCP169 Adapter + Limit frame

1 * TSOP56 Adapter RT-TSOP56-A V1.1

1 * TSOP48 Adapter

1 * SOP44-DIP44 1.27mm (530mil) Adaptador

1 * SOP28-DIP28 (300mil) Adaptador

1 * SOP20-DIP20 (300mil) Adaptador

1 * SOP16-DIP16 (300mil) Adaptador

1 * Double SOP8-DIP16 CNV-SOP20 (208mil) Adaptador

1 * SOP8-DIP8 CNV-SOP20 (208mil) Adaptador

1 * SOP20-DIP20 CNV-SOP20 (208mil) Adaptador

1 * SOP8-DIP8 CNV-SOP-DIP16 (150mil) Adaptador

1 * SOP16-DIP16 CNV-SOP-DIP16 (150mil) Adaptador

1 * PLCC44-DIP44

1 * PLCC44-DIP40

1 * PLCC32-DIP32

1 * PLCC28-DIP28

1 * PLCC28-DIP24

1 * PLCC20-DIP20

1 * SSOP28 to DIP28

1 * TSSOP8 to DIP8

1 * KB9012 board

1 * SOP8 IC Clip

1 * TSOP-VSOP-SSOP adapter

1 * ITE 29/39/49/50 series 32/40/48 feet adapter

1 * Multipurpose ISP-DuPont-Header Adapter

1 * EC NPEC288 NPEC388 PCB Board

1 * TSOP28Pin 0.65mm Adapter Board

1 * SOP28Pin 1.27mm Adapter Board

1 * TSOP20Pin 0.65mm Adapter Board

1 * SOP20Pin 1.27mm Adapter Board

1 * TSOP16Pin 0.65mm Adapter Board

1 * SOP16Pin 1.27mm Adapter Board

1 * TSOP14Pin 0.65mm Adapter Board

1 * SOP14Pin 1.27mm Adapter Board

1 * TSOP10Pin 0.65mm Adapter Board

1 * SOP10Pin 1.27mm Adapter Board

1 * TSOP8Pin 0.65mm Adapter Board

1 * SOP8Pin 1.27mm Adapter Board

1 * QFN8-DIP8 Programador Adaptador WSON8-DIP8 8x6mm 6x5mm

1 * SOP8/MSOP8/SSOP8/SOP16-DIP16 simple adaptador

1 * Adaptador SOP8-DIP8 simples

1 * 1.8V Conversion Block 25 series low voltage chip adapter

2 * ISP Cable

1 * ICSP Cable

1 * RT-SOP-A ISP Cable

1 * LCD LED screen EDID Cable

1 * IC Chip Extractor

1 * Suction Pen

1 * USB Cable

1 * VGA Cable

1 * FFC Line 200MM 0.5mm-32P

1 * FFC Line 200MM 1.0mm-32P

1 * FPC Base Under 0.5mm-32P

1 * FPC Base Under 1.0mm-32P

1 * Anti-Static Wristband Wrist Strap Band ESD Discharge PC Electricity Grounding

1 * VGA to HDMI Line Cable (It is suitable for reading and writing of TV without VGA interface Note: Use for TV HDMI port with TX/RX function only)

Brief description:

eMMC reading test 2 GB with outlet

eMMC write verify button 2GBytes with nest

NAND Read Verify 64Gbits

NAND Read Verify 1Gbits

NAND WRITE Verify 1Gbits

SPI NAND Read Verify 1Gbits

SPI NAND _WRITE Verify 1Gbits

NOR Read Verify 512Mbits

NOR WRITE Verify 512Mbits

40 pin Lock clasp Programmer for TOP2013 SoFi SP16

Smart CN900 Mini Transponder Key Programmer Mini CN900

Smart CN900 Mini Transponder Key Programmer

Support Online update

Various types of vehicle anti-the fault detection, matching detection

Portable Super long standby

support four kinds of frequency 850/900/1800/1900MHZ

Support 11/12/13/33/T5/4C/4D/42/46/48/72G chip copy.

GSM/GPRS SIM

USB2.0, Bluetooth4.0

Highlights:

RFID identifly 125KHZ 134.2KHZ 13MHZ

RF data reception 27-900MHZ

RF radio frequency identification,support all kinds of remote controls

RF Data transmission, supports all kinds of remote control simulation test

Various types of vehicle anti-the fault detection, matching detection

Portable Super long standby

Support four kinds of frequency 850/900/1800/1900MHZ

GSM/GPRS SIM

USB2.0

Bluetooth4.0

As for the products improvements, specifications are subject to change

Notice:This is just for booking now,it will take about half a month to arrive us

Smart CN900 Mini transponder Programmer :

1. Can directly copy 4C and other chips like Toyota 4d67.

2. Support copy 4D chips.

3. Can recongize locked ID48 and can unlock ID48.

4. Support copy 46 chips.

5. Support 72G chip.

Main Features

Function 1:

1) Read out the chip code for 11 12 13 33 T5 40 41 42 44 45 46 48 4C 4D 8C and 8E chips. With the detail format for ID 48 and 4D Chips.

2) New identify functions for Toyota "G " chip key (year: 2010) (Chip: 4D-72).

And it will show if the key is the main key or the vice key for Toyota, and later will add new identify function for the Chinese Car.

Function 2:

It can identify for Toyota smart key, and read out the data.

Function 3:

It supports on copying the chips (11 12 13 33 T5 41 and 42) and parts of 44 and 45.

Using "FREE " dedicated chips can copy none battery 4C and 4D chips directly.(Remark :cn1(4C),cn2(4D) is the name of special chip)

Function 4:

Connecting with Chinese PC software, it can save the read key code data unlimited.

Function 5:

Support on the chip programming: with the inner function of HITAGETI, it can write ID 46 Renault Crypto chips.

Function 6:

Without removing the ECU (for Benz W140), it can start the chip.

Function 7:

It can unlock the 48 chips except the crypto lock 48 chips.

Function 8:

Support on the pin code calculating for Hyundai and Kia (before 07 year), by using the Last 6 Codes of VIN Number.

Function 9:

Support on starting the key and calculating the pin code for more than 60 kinds of cars.

Support on programming all kind of Fiat key, such as (11, 13 and 33), These 3 kinds of 48 chips anti-theft way.

Function 10:

It Upgrade to identify for HONDA_46 CRV_46/CIVIC_46/ Mitsubishi 46

Ordinary 60 can be programmed to be 66/67/68/71/74

Function 11:

It Upgrade to copy CN1 (4C), CN2 (4D) chip .And size is 6mmX12mmX4mm

Support on the software update, such as adding new function for copying the induction card for Electronic Gate.

Function 12:

Can copy all ID46 chip:

BMW 46 chip,ACURA 46 chips,Honda CRV FIT(NEW) Accord(2008) Civic 46 chips;Mazda haima 46 chips;Mitsubishi 46 chips;Buick GMC CRUZE 46 chip. New Chery tiggo A3 46 chips; Nissan TIIDA TENNA LIVINA Sylphy Nissan QASHQAI Q35 46 chip. Brilliance 46 chip.Peugeot/Citroen 307 206 -46 chips;Triumph Senna 406 (2001year);Picasso 46 chip.Suzuki swifts SX4 46 chip.Land Rover FREELANDER 46 chip. Geely dedicated 46 chip.

Function 13:

can copy 4D chip

Function 14:

Support 72G Chip copy.

Package Including:

1pc X CN900 Mini

1pc X Power Adapter

1pc X USB Cable