Description

Condition: new and original

Note : Due to post air mail can not send button battery (CR2032 ,3.2V) , so we will not send button battery , please you buy from your hometown. thank you so much !

Package includes:

1 * Tester (No English Manual)

Importante!Prima di effettuare un ordine si prega di controllare indietro le informazioni di copertura Modello , EMC !!!

In pacchetto:

EFI Scheda bio x 1 pz

Compatibile: per l'inizio del 2014 A1466 820-3437 EMC 2632

Questa scheda chip può essere utilizzata per:

Rimuovere il blocco password EFI. ( 4 pin, 6 pin lock, cloud)
Risolverà il firmware danneggiato
Mac per disabili
MDM, profilo DEP, NVME

Chip verrà fornito con un S/N pulito.

(Non rimuoverà la password del sistema operativo o la password del disco rigido)

È possibile selezionare l'opzione di spedizione nel checkout: Economy o Expedited

Economia: 1035 giorni lavorativi (Europa e mondo)

Spedizioni: 5-10 giorni lavorativi(Europa e mondo)

Informazioni per il cliente / Información para el clientela:

se non siete dall'Europa, si prega di informarsi sulla tassa doganale, IVA del vostro paese.

Inviamo prodotti in Russia solo tramite POST registrato (12-20 giorni).

Colombia, Paraguay, Brasile, Messico,Perù- prima di effettuare un ordine, si prega di chiedere le vostre dogane su tasse e dazi.

Colombia, Paraguay, Brasile, Messico, Perù - antes de realizar un pedido, consulte con la aduana sobre la cantidad de impuestos y aranceles.

Si no eres de Europa, consult sobre el impuesto de aduanas, el IVA de tu país.

Si prega di selezionare CHIP CARDS dal nostro negozio, l'elenco è di seguito:

Elenco completo nel nostro negozio:

https://www.ebay.com/str/chipsetpro/EFI-CHIP-CARD/_i.html?store_cat=34800768010

Elenco esteso per modelli :

A1398 820-00426 EMC 2910https://www.ebay.com/itm/133806905410

A1398 820-00163 EMC 2910https://www.ebay.com/itm/133804388966

A1398 820-00138 EMC 2909https://www.ebay.com/itm/133804388953

A1465 820-00164 EMC 2924http://www.ebay.com/itm/133804388896

A1466 820-00165 EMC 3178https://www.ebay.com/itm/133804388936

A1466 820-00165 EMC 2925https://www.ebay.com/itm/133804388913

A1466 820-3209 EMC 2559http://www.ebay.com/itm/133852561250

A1502 820-4924 EMC 2835http://www.ebay.com/itm/133804388794

A1534 820-00687 EMC 3099https://www.ebay.com/itm/133806852129

A1534 820-00244 EMC 2991http://www.ebay.com/itm/133804388859

A1534 820-00045 EMC 2746https://www.ebay.com/itm/1338043887

A1706 820-00923 EMC 3163http://www.ebay.com/itm/133804388996

A1706 820-00239 EMC 3071https://www.ebay.com/itm/133804388833

A1707 820-00281 EMC 3072https://www.ebay.com/itm/133804389007

A1707 820-00928 EMC 3162https://www.ebay.com/itm/133804388777

A1708 820-00875 EMC 2978https://www.ebay.com/itm/133804388978

A1708 820-00840 EMC 3164https://www.ebay.com/itm/13380438878765

Supporto tecnico

BGA CHIPSET OBSERVE PRECAUMENTO PER LA MANUTENZIONE

BGA Chips è MOISTURE SENSITIVE DEVICES. I dispositivi richiedono la cottura, prima del montaggio, Ecco il processo generale di cottura, Lay il BAG sul vassoio, e metterlo in un gabinetto di cottura a secco. Impostare la temperatura e il tempo come: 125C x 24 ore o 80C x 48 ore

Prestare attenzione alla differenza tra

piombo (Pb) palle e piombo libero (No Pb) palle.

chip Pb BGA senza piombo:

245C-260C(Maximun)

Chip BGA piombo/Pb:

180C-205C(Maximun)

Azione sufficiente

 In package include: 

1 pcs Programmer SVOD Ver. 4
1 pcs USB Connection Cable
1 pcs Extended Board Of Ports For Keyboard Module
Flex Cables: 34pin, 32pin, 30pin, 26pin (All Cables What You See In Picture).
1 set – Soic 150mm + Soic 200mm
1set – Wson Qfn Sockets: 6x5 + 6x8
1 pcs -  Zip Clip
1 pcs – LCD Cable Tester Board
1 pcs  - EFI SPI ROM Ribbon Cable ( Hirose 30 + Molex 30 + Molex 12 )
1 set - Debug ZIF PCB ITE ENE NUVOTON

1 pcs - BGA Socket 153/169 + Frame 11,5x13

1 pcs - TSOP 48/DIP 48 Pitch 0.5

Please to select shipping option in checkout:

          Economy: 10-35 working days (Europe and Worldwide)

          Expedited : 5-10 working days  (Europe and Worldwide)

SVOD V4 programmer  is a universal programmer for various microcircuits.

As you know you can program different kinds of chips such as:  SPI, I2C, ONE WIRE, NAND, NAND SPI, NOR, EMMC BGA, JTAG, UART, ENE, MEC, ITE, NUVOTON, parallel synchronous and asynchronous protocols. Automatic detection of "bad contact" when connecting chips.

Protocol: JEDEC ID (spi25 flash, nand have 5 byte ID, spi NAND have 512 byte ID, nor48,40 have 3 byte id, emmc have 512 byte id, new spi25 have sfdp with 128 byte info).

 Specifications:

*SVOD 4 port of connection to the computer: usb 2.0- 3.0 high speed,

*SVOD 4 CPU: Processor ARM7, 480MHz

*SVOD 4 Voltage: 12V, 5V, 3.3V, 2.5V, 1.8V, 1.5V, 1.25V, 1.2V, 0.8V

*SVOD 4 GPIO PIN: 48+16 

 -------------------------------------------------------------------------

 SPI ROM EFI cable - Comptible Mbook's list until 2017 year if you use SVOD programmers,

 A1534 emc 2746 820-00045, A1534 emc 2991 820-00244, A1534 emc 3099 820-00687, A1370 emc 2393 820-2796, A1370 EMCXXXX 820-2955, A1370 EMCXXXX 820-2955, A1370 820-2855-A, A1465 emc 2558 820-3208, A1465 emc 2631 820-3435, A1465 emc 2924 820-00164, A1304 EMCXXXX 820-2375, A1304 EMCXXXX 820-2375, A1369 emc 2469 820-3023, A1466 emc 259 820-32509, A1466 emc 2632 820-3437, A1466 emc 2925 820-00165, A1466 emc 3178 820-00165, A1425 emc 2512 820-3462, A1502 emc 2678 820-3536, A1502 emc 2678 820-3476, A1502 emc 2875 820-3476, A1502 emc 2835 820-4924, A1398 emc 2512 820-3332, A1398 emc 2673 820-3332, A1398 emc 2746 820-3662, A1398 emc 2876 820-3662, A1398 emc 2745 820-3787, A1398 emc 2881 820-3787, A1398 emc 2909 820-00138, A1398 emc 2910 820-00163, A1398 emc 2910 820-00426, A1708 EMCXXXX 820-00361, A1708 emc 2978 820-00875, A1708 emc 3164 820-00840, A1706 emc 3071 820-00239, A1706 emc 3163 820-00923, A1707 emc 3072 820-00281, A1707 emc 3162 820-00928, A1283 emc 2264 820-2366,A1283 emc 2336 820-XXXX, A1347 emc 2364 820-2577, A1347 emc 2442 820-2993, A1347 emc 2442 820-3059, A1347 emc 2442 820-3017, A1347 emc 2570 820-3227, A1347 emc XXXX 820-3228, A1347 emc 2840 820-5509

  -------------------------------------------------------------------------

Supported:

KB9010,KB9012, KB9016, KB9018, KB9022, KB9028qc

 NPCE288N/NPCE388N

 ITE IT8380E PROGRAMMABLE

ITE IT8380VG PROGRAMMABLE

ITE IT8386 PROGRAMMABLE

ITE IT8522 PROGRAMMABLE

ITE IT8580 PROGRAMMABLE

ITE IT8585E PROGRAMMABLE

ITE IT8586E PROGRAMMABLE

ITE IT8586VG PROGRAMMABLE

ITE IT8587E PROGRAMMABLE

ITE IT8589 PROGRAMMABLE

ITE IT8886H PROGRAMMABLE

ITE IT8886HE PROGRAMMABLE

ITE IT8985E PROGRAMMABLE

ITE IT8987E PROGRAMMABLE

ITE IT8995E PROGRAMMABLE

NUVOTON NPCE288NA0DX PROGRAMMABLE

NUVOTON NPCE388NA0DX PROGRAMMABLE

MEC1404-NU 128-VTQFP PROGRAMMABLE 128 KB

SMSC MEC1404-SZ 144-WFBGA PROGRAMMABLE 128 KB

SMSC MEC1406-NU 128-VTQFP PROGRAMMABLE 160 KB

SMSC MEC1406-SZ 144-WFBGA PROGRAMMABLE 160 KB

SMSC MEC1408-NU 128-VTQFP PROGRAMMABLE 192 KB

SMSC MEC1408-SZ 144-WFBGA PROGRAMMABLE 192 KB

SMSC MEC1414-NU 128-VTQFP PROGRAMMABLE 128 KB

SMSC MEC1414-SZ 144-WFBGA PROGRAMMABLE 128 KB

SMSC MEC1416-NU 128-VTQFP PROGRAMMABLE 160 KB

SMSC MEC1416-SZ 144-WFBGA PROGRAMMABLE 160 KB

SMSC MEC1418-NU 128-VTQFP PROGRAMMABLE 192 KB

SMSC MEC1418-SZ 144-WFBGA PROGRAMMABLE 192 KB

SMSC MEC1609 PROGRAMMABLE

SMSC MEC1619 PROGRAMMABLE

SMSC MEC1632 PROGRAMMABLE

SMSC MEC1633 PROGRAMMABLE

SMSC MEC1641 PROGRAMMABLE

SMSC MEC1650 PROGRAMMABLE

SMSC MEC1651 PROGRAMMABLE

SMSC MEC1653 PROGRAMMABLE

SMSC MEC5035 PROGRAMMABLE

SMSC MEC5045 PROGRAMMABLE

SMSC MEC5055 PROGRAMMABLE

SMSC MEC5075 PROGRAMMABLE

SMSC MEC1609 PROGRAMMABLE

 SMSC MEC1609I PROGRAMMABLE

SMSC MEC1633L PROGRAMMABLE

 EPF011/021/035/036/037

 SMSC MEC5085 NON-PROGRAMMABLE

  You can buy a brand new programmer / Tested 100% .

 The mode of displaying POST codes of the laptop motherboard is implemented. Choose the software in the online base of your motherboard, download, select it in the choice of motherboard, connect the motherboard with a loop to the keyboard connector, and read the post codes by running the software in read mode of POST codes.

 MANY FLASHING FILES IN DATABASE FOR FREE

PDF FILES

ENE_KB9012_on_Precision_M3800_LA-9941P.pdf

ENE_KB9022_on_Thinkpad_S1_Yoga_12_LA-A342P_.pdf

In-Circuit_Serial_Programming_with_SVOD3.pdf

ITE_IT8586_on_Thinkpad_Yoga_2_Pro_VIUU3_NM-A074.pdf

MEC5075_on_Latitude_E7440_LA-9591P.pdf

if you are not from Europe, please inquire about customs tax, VAT of your country.

We send products in Russia via registered POST (12-20 days).

Colombia, Paraguay, Brazil, Mexico - before placing an order, please to ask your customs about tax and duties.

Colombia, Paraguay, Brazil, Mexico - antes de realizar un pedido, consulte con la aduana sobre la cantidad de impuestos y aranceles.

Si no eres de Europa, consulta sobre el impuesto de aduanas, el IVA de tu país.

Mini PCI/Mini PCI-E/LPC Combo-Debug-Card VIP version Notebook Combo-Debug-Card (VIP Version) User Guide

This notebook Combo-Debug Card Uses 4-layers PCB design to provide a very stable signal quality. Also, it uses Tantalum capacitance to provide good power supply. So this VIP version Debug card is more suitable to be used in poor environment. This VIP version is the upgraded version of the Combo-Debug-Card, and it supports three bus interfaces: MINI PCI, MINI PCI-E and LPC. This product is easy to use, and is designed with good stability. It is your ideal tool for notebook repair.

combo ?debug- card structure and usage

1. Mini-PCI interface:

This is used to connect this Combo Debug Card to notebooks Mini-PCI slot.

2. Mini-PCI-E interface:

This is used to connect this Combo Debug Card to notebooks Mini-PCI-e slot

3. LPC interface:

This is used to connect this Combo Debug Card to notebooks LPC connector.

4. ASIC

5. Two 7-segment LEDS:

This is used to display the Error-code

6. Test port:

This port is reserved, and end-user should not use this port.

7. indicator : this is for showing the status of CLK and RST signal.

The Mini-PCI interface in the Combo-Debug-Card

Mini PCI is a general interface, which is used in notebook. It includes 124 pins. This combo-debug-card doesnt fully use those pins, and only 101 pins are used. When installing this combo-debug-card to your notebook main-board , you will find the combo-debug-card is shorter than the notebook Mini-PCI slot. This is correct, and it servers better for you to plug or unplug this combo-debug-card.

The Mini-PCI-e interface in the Combo-Debug-Card

Mini-PCI is used as a trend in the new notebooks. Comparing to Mini-PCI, Mini-PCI-e occupies less space. This Combo-Debug-Card doesnt use all of the Mini-PCI-e bus pins. And only the below pins are used: PIN-8, PIN-10, PIN-12, PIN-14, PIN-16, PIN-17, and PIN-19. in the Mini-PCI-e spec, those pins are reserved, and it is not standard, so some of Notebook manufacturers define it as a LPC debug-port. And more and more notebook manufacturers are using this standard, such as IBM, Toshiba, HP, ASUS, TCL and etc??this Combo-Debug-Card can only work in the notebooks, which are with the LPC debug-port definition. For the notebooks, which dont support this LPC debug-port definition, this Combo-debug-card PCI-E interface will not work.

Note: Please be aware that Mini-PCI-e is supported with limitation, and it can works in most of notebooks, but not all.

The LPC interface in the Combo-Debug-Card

For the user, whose notebooks dont support the Mini-PCI interface and the Mini-PCI-e interface, you can use the third port: LPC interface. LPC interface exists in all notebook main-boards. In the Combo-Debug-Card, from left to right, the LPC definition is:

PIN1-LFRAME?, PIN2-LAD3, PIN3-LAD2, PIN4-LAD1, PIN5-LAD0, PIN6-GND, PIN7-LRESET?, PIN8- LCLK, PIN9-3.3V

Usually, the notebook boards havent LPC connectors or slots. And the users will need to connect this LPC port to the notebook by using wires. Below is some description for how to connect the Combo-Debug-Card to your notebook through this LPC interface.

If your notebooks use LPC VBIOS, you can connect the Combo-Debug-Card to your notebooks VBIOS bus.

LPC VBIOS Pin definition:

PIN2-RST? PIN13-LAD0 PIN14-LAD1 PIN15-LAD2 PIN16-GND PIN17-LAD3 PIN23-LFRAME? PIN25-VCC PIN31-CLK

You can connect this Combo-Debug-Card to any LPC bus. Some LPC interface chips are listed as below. You can connect the Combo-Debug-Card to the corresponding pins. For more information, please refer those chips datasheets.

Note: this Combo-Debug-Card uses 3.3V as power supply, and you can use any 3V3 and GND signals in your notebook main-board. Please be aware that connecting the Combo-Debug-Card to a non-3.3V power may damage this Combo-Debug-Card.

For IBM X 60 notebooks, the LPC interfaces are located in the U39 slot of the main-board. The Pin definitions are as below: A2->LRESET? A3->LFRAME? A5->LCLK A9->LAD3 A10->LAD2 A11->LAD1 A12->LAD0

For IBM T6 R6 notebooks, the LPC interfaces are located in the J26 slot of the main-board. The Pin definitions are as below: A1->LCLK, A3->LFRAME? B2->LRESET? B7->LAD3 A7->LAD2 B6->LAD1 A6->LAD0

The LED-Display in the Combo-Debug-Card

The Display includes Error-Code display, Bus-Type display, and CLK,RST signal, status display .

1, Error-Code display: It is composed with two 7-segment LED s.

2, Bus-Type display: The two Dots of the LED s are used to indicate the notebook bus type. The left side Dot is for Mini-PCI bus, and the right side Dot is for Mini-PCI-e and LPC bus. When the notebook works in Mini-PCI bus, the right side Dot will be lighted.

3, CLK, RST signal status display: when you hold on the notebooks RESET button, the RST indicator will be lighted, and the CLK indicator will be off. When you release the notebook RESET button, the RST indicator will be off, and the CLK indicator will be twinkled.

Part of Error-Code explanation

When the notebooks are running, this Combo-Debug-Card will show the corresponding debug code. If there is a problem in the notebook, you can judge the problem by the debug code. Below is the explanation for some main error codes.

AWARD BIOS:The explanation when the Combo-Debug-Card shows the below debug codes.

Code Explanation

C0 Close cache

01 Processor test

07 CMOS test

C1 Memory size test

0A Set the interrupt table

0C Initiate the keyboard

0D Initiate the Graphic card

1A Show CPU frequency

3C CMOS setting

42 Initiate hardware

52 Test the extended ROM

FF Boot

AMI BIOS: The explanation when the Combo-Debug-Card shows the below debug codes.

Code Explanation

00 Error in self test

01 Error in processor test

0D,0F Error in CMOS test

1A~22 Error in Memory test

3A Error in graphic card

FF Pass the self test

Q/A

Question: RST indicator is off, but CLK indicator is NOT twinkled.

Answer: this symptom shows there is no CLK signal for debug card so that the CLK indicator isnt twinkled .Usually, it may mean the motherboard can NOT support this Mini-PCI-e interface. Please use Mini-PCI or LPC interface to test it.

Question: RST indicator is off ,and CLK indicator is twinkled. But it shows 00

Answer: In this case, please check the Bus-Type display to check if the Bus-Type display is corresponding to the bus type.

In pacchetto:

EFI Scheda bio x 1 pz

Compatibile: per metà 2013 A1466 820-3437 EMC 2632

Questa scheda chip può essere utilizzata per:

Rimuovere il blocco password EFI. ( 4 pin, 6 pin lock, cloud)
Risolverà il firmware danneggiato
Mac per disabili
MDM, profilo DEP, NVME

Chip verrà fornito con un S/N pulito.

(Non rimuoverà la password del sistema operativo o la password del disco rigido)

È possibile selezionare l'opzione di spedizione nel checkout: Economy o Expedited

Economia: 1035 giorni lavorativi (Europa e mondo)

Spedizioni: 5-10 giorni lavorativi(Europa e mondo)

Informazioni per il cliente / Información para el clientela:

se non siete dall'Europa, si prega di informarsi sulla tassa doganale, IVA del vostro paese.

Inviamo prodotti in Russia solo tramite POST registrato (12-20 giorni).

Colombia, Paraguay, Brasile, Messico,Perù- prima di effettuare un ordine, si prega di chiedere le vostre dogane su tasse e dazi.

Colombia, Paraguay, Brasile, Messico, Perù - antes de realizar un pedido, consulte con la aduana sobre la cantidad de impuestos y aranceles.

Si no eres de Europa, consult sobre el impuesto de aduanas, el IVA de tu país.

Si prega di selezionare CHIP CARDS dal nostro negozio, l'elenco è di seguito:

Elenco completo nel nostro negozio:

https://www.ebay.com/str/chipsetpro/EFI-CHIP-CARD/_i.html?store_cat=34800768010

Elenco esteso per modelli :

A1398 820-00426 EMC 2910https://www.ebay.com/itm/133806905410

A1398 820-00163 EMC 2910https://www.ebay.com/itm/133804388966

A1398 820-00138 EMC 2909https://www.ebay.com/itm/133804388953

A1465 820-00164 EMC 2924http://www.ebay.com/itm/133804388896

A1466 820-00165 EMC 3178https://www.ebay.com/itm/133804388936

A1466 820-00165 EMC 2925https://www.ebay.com/itm/133804388913

A1466 820-3209 EMC 2559http://www.ebay.com/itm/133852561250

A1502 820-4924 EMC 2835http://www.ebay.com/itm/133804388794

A1534 820-00687 EMC 3099https://www.ebay.com/itm/133806852129

A1534 820-00244 EMC 2991http://www.ebay.com/itm/133804388859

A1534 820-00045 EMC 2746https://www.ebay.com/itm/1338043887

A1706 820-00923 EMC 3163http://www.ebay.com/itm/133804388996

A1706 820-00239 EMC 3071https://www.ebay.com/itm/133804388833

A1707 820-00281 EMC 3072https://www.ebay.com/itm/133804389007

A1707 820-00928 EMC 3162https://www.ebay.com/itm/133804388777

A1708 820-00875 EMC 2978https://www.ebay.com/itm/133804388978

A1708 820-00840 EMC 3164https://www.ebay.com/itm/13380438878765

Nome del prodotto

Set vite copricapo inferiore per MacBook Unibody 13" A1342

Condizione del prodotto

NUOVO

Modello compatibile

MacBook 13" A1342 2009

Sottofamiglia compatibile

MacBook "Core 2 Duo" 2.26 13" (Uni/Late 09)

MacBook "Core 2 Duo" 2.4 13" (Mid-2010)

Modello compatibile No

MC207LL/A, MC516LL/A

Pre-ordine 3-4 settimane / Précommande / Por adelantado / Vorbestellen / Preordinare / Przedsprzedaż / Pré-compra

In pacchetto incluso:

1 programmatore SVOD 4

1 cavo di collegamento USB pcs

1 pezzi Scheda estesa di porte per modulo tastiera

Cavi Flex: 34pin, 32pin, 30pin, 26pin (tutti i cavi che vedi in foto).

1 set – soic zip sockets: 150mm + 200mm

1set – wson qfn sockets: 6x5 + 6x8

1 pz - clip zip

1 pz – scheda tester LCD

1 pz - Cavo nastro EFI SPI ROM (hirose 30 + molex 30 + molex 12 )

1 set - Debug ZIF PCB ITE ENE NUVOTON

SVOD 4programmatore è un programmatore universale per vari microcircuiti.

Come sapete è possibile programmare diversi tipi di chip come: SPI, I2C, ONE WIRE, NAND, NAND SPI, NOR, EMMC, JTAG, UART, ENE, MEC, ITE, NUVOTON, protocolli sincrono paralleli e asincroni. Rilevamento automatico di "cattivo contatto" quando si collegano chip.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Cavo SPI ROM - Elenco completo di Mbook fino all'anno 2017 se si utilizzano programmatori SVOD:

A3-87-88, B3-88, B3-88, B3-88, B3-88, B3-88, B3-88, B2-88, B2-88, B2-88, B2-88-B3-88-C

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Supportato:

KB9010,KB9012, KB9016, KB9018, KB9022, KB9028qc

NPCE288N/NPCE388N

ITE it8380E programmabile

ITE it8380VG programmabile

ITE it8386 programmabile

ITE it8522 programmabile

ITE it8580 programmabile

ITE it8585e programmabile

ITE it8586e programmabile

ITE it8586VG programmabile

ITE it8587e programmabile

ITE it8589 programmabile

ITE it8886H programmabile

ITE it8886he programmabile

ITE it8985e programmabile

ITE it8987e programmabile

ITE it8995E programmabile

Nuvoton npce288na0dx programmabile

Nuvoton npce388na0dx programmabile

SMSC MEC1404-NU 128-VTQFP

SMSC MEC1404-SZ 144-WFBGA

SMSC MEC1406-NU 128-VTQFP

SMSC MEC1406-SZ 144-WFBGA

SMSC MEC1408-NU 128-VTQFP

SMSC MEC1408-SZ 144-WFBGA

SMSC MEC1414-NU 128-VTQFP

SMSC MEC1414-SZ 144-WFBGA

SMSC MEC1416-NU 128-VTQFP

SMSC MEC1416-SZ 144-WFBGA

SMSC MEC1418-NU 128-VTQFP

SMSC MEC1418-SZ 144-WFBGA

SMSC MEC1609 programmabile

SMSC MEC1619 programmabile

SMSC MEC1632 programmabile

SMSC MEC1633 programmabile

SMSC MEC1641 programmabile

SMSC MEC1650 programmabile

SMSC MEC1651 programmabile

SMSC MEC1653 programmabile

SMSC MEC5035 programmabile

SMSC MEC5045 programmabile

SMSC MEC5055 programmabile

SMSC MEC5075 programmabile

SMSC MEC1609 programmabile

SMSC MEC1609i programmabile

SMSC MEC1633L programmabile

EPF011/021/035/036/037

SMSC MEC5085 non programmabile

protocollo: ID JEDEC(Spi25 flash, nand hanno 5 byte ID, Spi NAND hanno 512 byte ID, nor48,40 hanno 3 byte id, emmc hanno 512 byte id, nuovo spi25 hanno sfdp con 128 byte info).

Specifiche:

- porta di connessione al computer: usb 2.0 ad alta velocità,
- connessione di microcircuiti: zif 48,
- numero di porte di ingresso/uscita: 48,
- tensione di alimentazione: 1.2V / 1.8V / 2.5V / 3.3V

È possibile acquistare un nuovo programmatore /Testato 100% .

La modalità di visualizzazione dei codici POST della scheda madre del computer portatile è implementata. Scegliere il software nella base online della scheda madre, scaricare, selezionarlo nella scelta della scheda madre, collegare la scheda madre con un anello al connettore della tastiera e leggere i codici posta eseguendo il software in modalità lettura dei codici POST.

FILI DI FLASHING MANI IN DATIBASE GRATIS

PDF

ENE_KB9012_on_Precision_M3800_LA-9941P.pdf

ENE_KB9022_on_Thinkpad_S1_Yoga_12_LA-A342P_pdf
In-Circuit_Serial_Programming_with_SVOD3.pdf
ITE_IT8586_on_Thinkpad_Yoga_2_Pro_VIUU3_NM-A074.pdf
MEC5075_on_Latitude_E7440_LA-9591P.pdf

Dettagli di spedizione:

Spedizione veloce: Secondo giorno dopo il pagamento ricevuto.

Europa: 3-5 giorni. Altri paesi: più di 5 giorni.

Il nostro tempo di lavoro: 8.00 - 12.00AM, 13.00-17.00

Spedizione mondiale # Via DHL, DPD, Deutsche Post

Dettagli dell'azienda:

Azienda: UAB Agrimera

Codice azienda: 304751773

IVA: LT100011487912

Banca mondiale: LT047300010154179253

Informazioni per il cliente / Información para el clientela:

se non siete dall'Europa, si prega di informarsi sulla tassa doganale, IVA del vostro paese.

Inviamo prodotti in Russia tramite POST registrato (12-20 giorni).

Colombia, Paraguay, Brasile, Messico - prima di effettuare un ordine, si prega di chiedere le vostre dogane su tasse e dazi.

Colombia, Paraguay, Brasile, Messico - antes de realizar un pedido, consulte con la aduana sobre la cantidad de impuestos y aranceles.

Si no eres de Europa, consult sobre el impuesto de aduanas, el IVA de tu país.

Supporto tecnico

BGA CHIPSET OBSERVE PRECAUMENTO PER LA MANUTENZIONE

BGA Chips è MOISTURE SENSITIVE DEVICES. I dispositivi richiedono la cottura, prima del montaggio, Ecco il processo generale di cottura, Lay il BAG sul vassoio, e metterlo in un gabinetto di cottura a secco. Impostare la temperatura e il tempo come: 125C x 24 ore o 80C x 48 ore

Prestare attenzione alla differenza tra

piombo (Pb) palle e piombo libero (No Pb) palle.

chip Pb BGA senza piombo:

245C-260C(Maximun)

Chip BGA piombo/Pb:

180C-205C(Maximun)

Azione sufficiente