Taiwan lead-free high quality 936 iron head

Characteristic:

1. special cast iron process, corrosion resistance, oxidation resistance, especially for long life.

2. strong immersion prolonged, easy to melt, Shangxi, solder joint round.

3. ? uniform inductance, stable quality, lead-free material.

4. lead-free environmental production, has passed the SGS test.

All soldering stations used in the 900M-T series

Such as table machine, 936 series welding platform

900M series lead-free soldering iron

? made of pure copper components, high thermal conductivity, fast heat transfer

? special iron surface plating, high temperature resistance, corrosion resistance

Special process, suitable for lead-free solder welding

? strong tin capacity, no oxidation, no tin, no tin, tin climbing phenomenon

? the outer layer is bright and delicate and very strong in rust resistance

? this product has passed the SGS environmental protection test

Life of soldering iron head

The life of the iron head is determined by the number of welds, and the length of life guaranteed depends on the coating thickness of the head. The thicker the coating, the longer the life of the iron head, but the heat transfer efficiency will be greatly reduced, the life of the iron tip for the same temperature series of iron head, fine iron head, life expectancy than a rough iron head life is shorter. Because the iron head is working, it will inevitably cause wear and tear on the surface of the nozzle life. Therefore, the fine iron head is more prone to wear, so to reduce the life of the soldering iron.

Maintenance of iron head

The use of new electric iron, electric iron can not bring the new use, need to be plated with a layer of solder in the iron head method is: according to the power supply when the temperature gradually increased, the rosin coated iron head; rosin smoke, to melt the solder iron head, with a the solder layer so as to strengthen the tip life.

Input voltage range: DC 3.2V to 46V is recommended for use in 40V! The input voltage must be more than 1.5V higher than the voltage to be output. Can't boost)

Output voltage range: DC 1.25V to 35V voltage continuously adjustable, high efficiency (maximum 92%) maximum output current is 3A.

Measured 12V input, 5V output current 1A load adjustment rate is less than 1%

Note: This is a buck module, and the input voltage must be higher than the output voltage.

Output below 2A can be long time without adding fins output current greater than 2.5A (or output power greater than 10W) long time work, Please add fins.

Model / name: LM2596S DC-DC buck module

input voltage: 3.2V~46V (recommended for use in 40V)

output voltage: 1.25V~35V

Output current: 3A (max)

conversion efficiency: 92% (highest)

Output ripple: <30mV

switching frequency: 65KHz

working temperature: -45 C ~ +85 C

Size: 43mm * 21mm * 14mm (length * width * height)

LVDS Cable Acer Aspire E1-531 50.M09N2.005, DC02001FO10

Part Number DC02001FO10 Manufacturer Acer

Type LVDS Cable Date Code 16+

Package/Case 1 PCS Description Original new

Buy Tweezers Set: * IC Chip Extractor Rework Tweezer Tool

AOYUE 968A+ 220v 3 in 1 multifunction soldering station SMD rework station soldering iron welding iron BGA rework station

Voltage: 220V or 110V , pls let us know your voltage choice when order , thanks

Size: 188 (W) x 246 (depth) x 126 (H) mm

Weight: 5.25Kg

Iron

Temperature range: 200?~480?

Power: 70W

Heating elements: ceramic heating element

Tip grounding resistance: 2 ohms

Tip ground voltage: less than 2mV

Output voltage: 24V

Heat Gun

Power: 550W

Temperature range: 100?~480?

Heating elements: ceramic metal hot cores

Vacuum launched Type: Special diaphragm pump

Vacuum pressure / volume (maximum): 23L / min

Packing Checklist

AOYUE 968A +

Wind Tsui AT-5 include: (1124,1130,1197,1196,1313)

Activated carbon sponge

Suction nozzle cover

Wind firearms rack

Fork

Power cord (1.5m)

Iron pen

Iron frame

AOYUE iron frame assembly instructions

AOYUE 968A + manual

Specification:

Working Voltage:6.5--100VDC

Testing Voltage:6.5--100VDC

Max Power: 20A/2000W

Measurement Precision: Class 1

Function:

Measure and Monitor the Electrical Parameters (Voltage, Current, KWh, Watt)

Overload Alarm Function (more than watt alarm threshold , backlight flashing)

power alarm threshold preset function (can set up their own power alarm threshold)

power(kWh) button reset function

When power off, store the data, when on, continue the date

Large screen LCD liquid crystal screen full display function (voltage, current, kWh, watt)

Backlight function

Display

Display interface. By the large screen LCD display LCD monitor voltage and current, kWh, watt, electric parameters

Watt: the measurement range of 0~2kW

less than 1kW: 0.0~999.9W

less than 10KW: 1000~2000W

KWh: the measurement range of 0~9999kWh

less than 10kWh: 0~9999Wh

more than 10KWh:10~9999kWh

The test voltage range of 6.5-100V

DC Display format 6.50~99.99V

Current test range: 0~20A

Display format 0.00~20.00A

Button

Backlight Control

Can turn on/off backlight by short press

Power Reset

Step 1: long time press the button ( about 5 seconds), til display flicker, then release the button;

Step 2: if short time press the button again, then power(kWh) reset zero and exit flicker;

Step 3: if long press button for 5 seconds until it is no longer flicker, power(kWh) data is not cleared and exit.

Set the Alarm (watt)

Step 1: long press the button, till the LCD screen display "SET CLr", release the button.

Step 2: show the alarm(voltage) value, short time press, value(number) increase. don't press the button for 3 seconds, the setting switch to other bit.

Step 3: long time press the button(about 5 seconds) ----> save the threshold voltage value. threshold setting watt range: 6.5v-99.99v.

Notes:

Pls connect the wiring correctly(The polarity)

This module not suit for outdoor

The added load can not exceed the rated voltage and current

Package Included:

1 X 4in1 Panel Meter

Technical Support

BGA CHIPSET OBSERVE PRECAUTIONS FOR HANDLING

BGA Chips is MOISTURE SENSITIVE DEVICES. Devices require baking, before mounting, Here is the general bake-out process, Lay the BAG on the tray, and put it in to a baking dry cabinet. Set the temperature and time as: 125C x 24 hours or 80C x 48 hours

Pay attention to the difference between

leaded (Pb) balls and lead free (No Pb) balls.

Lead-free/No Pb BGA chips:

245C-260C(Maximun)

Leaded/Pb BGA chips:

180C-205C(Maximun)

Sufficient Stock

Buy Tweezers Set: * VETUS ESD-10 ESD-11 ESD-12 ESD-13 ESD-14 ESD-15 ESD-16

LCD LVDS Video Screen Cable For HP Pavilion G6-2000 G6-2238DX Laptop DD0R36LC020

100% Brand new and high quality

The copper has high purity coefficient of thermal conductivity as high as 407 w/ (m?K)

With this copper pad to greatly lower GPU temperatures, can be used for graphics, northbridge, CPU chips.

It can be applied to HP, Dell, Acer, Thinkpad and all laptop and computer heatsink solution!

Material: Copper

Color: As the picture

Size: Approx. 1.0T x 15 x 15(T*L*W)

How to use: First daub a little thermal silicone grease (FYI: Do not use the low-end silicone grease), then put the right size copper shims, then daub a little thermal silicone grease again, last install the heatsink and tighten the screws

AntMine S9i specification parameters:

1. Rated power: 14.5TH / S + 5%

2. Wall power consumption: 1365W+10% (wall efficiency, AC / DC 93% efficiency, 25 degree C ambient temperature)

3. Power efficiency: 94.14J/TH+10% (wall, AC / DC 93% efficiency, 25 degree C ambient temperature)

4. Rated voltage: 11.6~13.0V

5. Outer box size: 445 mm (L) *215 mm (W) *255 mm (H)

6. Cooling: 2 * 12038 fans.

7. Working temperature: 0 C to 40 C

8. Working humidity: 5%RH-95%RH, non condensation.

9. Network connection: Ethernet

10. Noise: 76dB

11. Machine weight (including packaging): mine 5.5kg+ power 2.5kg

12. Power connection mode: Each arithmetic board has three PCIE interfaces that need to be connected. It is recommended to use independent power supply to power the whole machine. In the case of independent power supply, three arithmetic boards can be connected to different power supply, but each arithmetic board can not connect multiple power sources, and ensure that the arithmetic board is finally powered on.

Matters needing attention:

1. Chassis deformation or heat sink falling off, please do not power up, contact after-sales treatment.

2. Do not use the two power supply with the same power plate.

3. Suggest using ant pond (www.antpool.com).

Bitmain Power Supply APW3

HP EliteBook 840 G3 Keyboards US

Features

1 14 in 1 professioinal tool kit complete with screwdriver bits and tools necessary for repair of Apple products,latop,mp3 mp4 mp5 and other small electronic equipments.

2 POM opening levers to provide leverage to open the housing easily and access the inside parts safely.

3 Prying paddle for scratch-free opening of cases.

4 Used for repairing or replacing the touch screen, battery.back shell for your phone and computer

Description

5 point star pentalobe 0.8mm (for iphone 4/4s,for iphone 5/5S)

5 point star pentalobe 1.2mm (for bottom cover or case screws of MacBook Air (2010-2012) and Retina MacBook Pro 12&13 2012)

Phillips 1.5mm bit Screwdriver for the phillips screw.

Torx:T6 (for removable Mobile phones, Computers, the size of hard drives,Laptops,macbook,macbook air,macbook pro,Shavers and other appliances)

Flated 2.0mm

126 Nylon Spudger(Special for open cell phone and flex cable)

128 Plastic Pry(special for splitting the film)

Strong sucker(removing touch screens without leaving marks on device.)

Double Headed Crowbar(safely pry open devices without scratching the case, glass, or internal components)

Guitar pick (Screen peeling from the external screen below double-sided adhesive)

Pry pick (Opening the back shell)

Package Include

1 * Torx:T6

1 * 5 point star pentalobe 0.8

1 * 5 point star pentalobe 1.2

1 * Guitar pick

1 * Pry pick

1 * Rubber Pry pick

1 * 126 spudger

1 * 128 Plastic pry

3 * Strong sucker

1 * Blade

2 * Double headed crowbar