48V-0.5A Wall Plug POE Injector Ethernet Adapter IP Phone/Camera Power Supply

A perfect solution for applications where an electrical outlet may not be available, the injector adapter can be used to power PoE-enabled devices such as IP cameras or Wireless Access Points (WAPs). The compact, wall-mountable design makes it easy to install the adapter into areas where space is limited, and can be installed in seconds with no configuration required.

Applications:

IP Phone

Wireless Access Point and Client Devices

Security Camera Systems

Specifications:

Output 48V DC 500mA - Please do not order if your unit requires more than 500 MilliAmps

Input 100-240V 50/60HZ

Output 48V-0.5A

Input Current 1A

Efficiency 80% Min

Line / Load Regulation 3% / 5%

Ripple / Noise 200mV p-p

Turn-On Delay 2 Seconds Max

Rise Time 40 mS Max

Protections Auto Recover Over-Voltage, Short Circuit, Over-Current

Safety and EMC Standards UL 60950, CE

Environmental Standards RoHs

Operating Temperature -10 to +40C (14 to +104F)

Operating Humidity (RH) 5% - 90%

Storage Temperature -20 to +85C (-4 to +185F)

Network Connector Type RJ45 Shielded

POE Type Passive POE ( Pins 4,5 V+, Pins 7,8 V-)

Technical Specifications:

Provides remote power to equipment through CAT 5 Ethernet cable up to 100M

Autoranging switching power supply 100~240V AC

Short circuit, over-current, and over-voltage protection

Reliable 24W passive POE output

Compact, portable size with convenient wall plug design