Specification:

Working Voltage:6.5--100VDC

Testing Voltage:6.5--100VDC

Max Power: 20A/2000W

Measurement Precision: Class 1

Function:

Measure and Monitor the Electrical Parameters (Voltage, Current, KWh, Watt)

Overload Alarm Function (more than watt alarm threshold , backlight flashing)

power alarm threshold preset function (can set up their own power alarm threshold)

power(kWh) button reset function

When power off, store the data, when on, continue the date

Large screen LCD liquid crystal screen full display function (voltage, current, kWh, watt)

Backlight function

Display

Display interface. By the large screen LCD display LCD monitor voltage and current, kWh, watt, electric parameters

Watt: the measurement range of 0~2kW

less than 1kW: 0.0~999.9W

less than 10KW: 1000~2000W

KWh: the measurement range of 0~9999kWh

less than 10kWh: 0~9999Wh

more than 10KWh:10~9999kWh

The test voltage range of 6.5-100V

DC Display format 6.50~99.99V

Current test range: 0~20A

Display format 0.00~20.00A

Button

Backlight Control

Can turn on/off backlight by short press

Power Reset

Step 1: long time press the button ( about 5 seconds), til display flicker, then release the button;

Step 2: if short time press the button again, then power(kWh) reset zero and exit flicker;

Step 3: if long press button for 5 seconds until it is no longer flicker, power(kWh) data is not cleared and exit.

Set the Alarm (watt)

Step 1: long press the button, till the LCD screen display "SET CLr", release the button.

Step 2: show the alarm(voltage) value, short time press, value(number) increase. don't press the button for 3 seconds, the setting switch to other bit.

Step 3: long time press the button(about 5 seconds) ----> save the threshold voltage value. threshold setting watt range: 6.5v-99.99v.

Notes:

Pls connect the wiring correctly(The polarity)

This module not suit for outdoor

The added load can not exceed the rated voltage and current

Package Included:

1 X 4in1 Panel Meter